How do I safely get the side panels of the printer off

How do I safely get the side panels off the printer. I am attempting a repair and do not want to break them

The thin strip is called the encoder strip.  It has very fine lines that are used to keep track of where the carriage is as it moves across the paper.  You should not need to remove the sides to replace this, but it can be a bit tricky.  The post here may help.  Be sure the encoder strip is properly threaded through the sensor at the back of the carriage.
Bob Headrick,  HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Similar Messages

  • TS3243 My Desktop Mac won't startup, it turns on to the grey screen flashing question file. I have been able to startup from the snow leopard install cd but once I try to repair within DU the disk never appears in the side panel. The only thing there is "

    My Desktop Mac won't startup, it turns on to the grey screen flashing question file. I have been able to startup from the snow leopard install cd but once I try to repair within DU the disk never appears in the side panel. The only thing there is "Media"... What can I do? Help!

    If Disk Utility cannot see your drive it doesn't look good.
    You could try DiskWarrior. It is expensive but can often fix directory structures where DU cannot.
    Replacing the drive is also a strong likelihood. If you don't have a fairly recent backup, then it might be worth buying DiskWarrior
    additonal notes;
    Gray screen appears during startup

  • When I open a new tab I get a side panel with the new tab instead of changing to a full screen....missing a setting somewhere ..help plse and thanks

    when I open a new tab, I get a sidebar instead of a full page with the new tab....have tried changing all of the tab settings under options...am getting old and senile and this drives me nuts..plse help and thanks for your time. New FF is quick

    hello, please install the search reset addon - it will revert the most common customizations those adware programs do in firefox back to the default: https://addons.mozilla.org/firefox/addon/searchreset/

  • How can you minimize or (turn) off the "side panel" in Web Intelligence in the view mode.

    How can you minimize or (turn) off the "side panel" in Web Intelligence in the view mode.
    It is possible to turn on/off options within the Side Panel by Customization of Groups.
    But it seems You cannot influence the way Web Intelligence present (minimized or Off) the Side Panel in the IE??
    Is there a solution for this??
    If not, it would be a nice property of a Web Intelligence document in a future release.

    Hi Nico,
    we patched up to BI 4.1 SP 3 Patch 2
    and look look
    click side panel to minimize
    so .. patch patch ...

  • PowerMac G5 will ONLY boot up when the side panel is removed

    Hi,
    We have a PowerMac G5 Dual 2.5GHZ . This mac will ONLY boot up when the side panel and the clear plastic panel are removed. If the Mac is assembled, the Mac will start and Chime, but thats it. No display and the fans are dead quite. Any Suggestions? Thanks in advance

    Hi, I realised that this problem has ONLY occured AFTER I installed Leopard. I then reformated the hard drive and installed 10.34 ( the OS that came with the G5) and it is as good as gold. I then reformated the hard drive and installed Leopard. After a few minutes the G5 became noisy and unstable. I then reformatted the hard drive AGAIN and reinstalled 10.34 and it stable. How can I install Leopard without the machine behaving erratic? Thanks for any advice in advance

  • How can I get the picture to show in Photoshop?  The thumbnail image appears in the right side panel but the full image isn't showing at all.

    How can I get the picture to show in Photoshop CS3?  The thumbnail image appears in the right side panel but the full image isn't showing at all.

    What specific information would you need?  The program was working just fine early yesterday morning and than when I came back in the afternoon to edit  some more pictures that is when I wasn't able to see the full image anymore.  It is providing me with all of the editing options as if the picture is there but it is just a blank screen with the thumbnail pic showing in the right panel. 

  • I just loaded the 'lion' now my mail takes a new life....how do i move the reading panel to the bottom / also how do i get rid of the text/content under each mail..two simple things not sure obvious on this version !!!

    i just loaded the 'lion' now my mail takes a new life....how do i move the reading panel to the bottom / also how do i get rid of the text/content under each mail..two simple things not sure obvious on this version !!!

             

  • My Mac Pro tower quad core crashed and is showing a NO sign (the circle with a slash through it). How do I safely get it to come back up ? Model A1186

    My Mac Pro tower quad core crashed and is showing a NO sign (the circle with a slash through it). How do I safely get it to come back up ? Model A1186

    General purpose Mac troubleshooting guide:
    Isolating issues in Mac OS X
    Creating a temporary user to isolate user-specific problems:
    Isolating an issue by using another user account
    Identifying resource hogs and other tips:
    Using Activity Monitor to read System Memory and determine how much RAM is being used
    Starting the computer in "safe mode":
    Mac OS X: What is Safe Boot, Safe Mode?
    To identify potential hardware problems:
    Apple Hardware Test
    General Mac maintenance:
    Tips to keep your Mac in top form
    Troubleshooting: My computer won't turn on
    https://support.apple.com/kb/TS1367
    Where are your bootable backups and clones stored?
    What do you have to boot from to restore or attempt to recovery files that are not backed up?
    It won't be a PowerMac. People tend to think they look alike? or mean the same thing.
    http://www.everymac.com/systems/apple/mac_pro/specs/mac-pro-quad-2.66-specs.html
    Try zap PRAM and SMC Reset. If you have ATI 5770 which many have upgraded to you won't be able to use older DVD or systems than 10.6.5

  • Tell me how to make Ctrl-B open the bookmarks panel on the left side and NOT open Bing.

    For years the Bookmarks panel on the left side would open when I press Ctrl-B. Now it opens Bing. How can I fix this?

    Does the sidebar open correctly if you use View > Sidebar?
    *Press the F10 key or tap the Alt key to bring up the hidden Menu bar.
    There aren't any extensions listed in the System Details List that could cause this, so I'm not sure why this would happen.
    *https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
    Are you sure that you aren't opening a specific bookmark in the sidebar?
    Opening in the sidebar is the default for bookmarks that are created via a link or button on a website.<br />
    You can check the properties of a bookmark via the right-click context menu in the sidebar (Ctrl+B; Command+B on Mac).<br />
    In the Bookmarks Manager (Bookmarks > Show All Bookmarks) you can click the More button in the Details pane at the bottom right.
    Make sure that "Load this bookmark in the sidebar" is not selected.

  • How can I display the front panel of the dinamically loaded VI on the cliente computer, the VI dinamically loaded contains files, I want to see the files that the server machine has, in the client machine

    I can successfully view and control a VI remotly. However, the remote VI dinamically loads another VI, this VI loaded dinamically is a VI that allows open others VIs, I want to see the files that contains the server machine, in the client machine, but the front panel of the dinamic VI appears only on the server and not on the client, How can I display the fron panel with the files of the server machine of the dinamically loaded VI on the client computer?
    Attachments:
    micliente.llb ‏183 KB
    miservidor.llb ‏186 KB
    rdsubvis.llb ‏214 KB

    I down loaded your files but could use some instructions on what needs run.
    It seems that you are so close yet so far. You need to get the data on the server machine over to the client. I generally do this by doing a call by reference (on the client machine) of a VI that is served by the server. THe VI that executes on the server should pass the data you want to diplay via one of its output terminals. You can simply wire from this terminal (back on the client again) to an indicator of your choosing.
    Now theorectically, I do not think that there is anything that prevents use from getting the control refnum of the actual indicator (on the server) of the indicator that has the data, and read its "Value" using a property node. I have never tried this idea but it seems t
    hat all of the parts are there. You will need to know the name of the VI that holds the data as well as the indicator's name. You will also have to serve all VI's. This is not a good idea.
    Ben
    Ben Rayner
    I am currently active on.. MainStream Preppers
    Rayner's Ridge is under construction

  • How do I safely get rid of a partition?

    hi
    i recently bought a powrmac g4 off ebay with a 933 Mhz processor, 1.25 GB RAM and a 120 gig HD that was partitioned into 2 drives (by, i assume, the previous owner) with one of them running the OS. I just installed a new shiney Maxtor 200 gig HD and wanted to get rid of the partition in the 1st HD but still boot from it. The problem is that the OS already on the drive is newer than the one that I have the disk for, so if I erase it (the drive) then re-install the OS with the disk I have, it will be out of date. The other problem is that I'm not sure of the risks involved in this operation; there are some applications on the 1st HD that I don't have the disks for (as they came with the computer) that are valuable and I don't want to lose.
    So...
    How do I safely get rid of the partition on the 12o GB hard drive?
    Thanks
    Dave

    Use the Restore function of Disk Utility or CarbonCopyCloner to copy all the files from the 120GB HD to the new HD. Then boot to the new HD & use Disk Utility to erase & format the 120GB HD to one partition. (Make sure the new HD & files are working properly before you erase the old HD.)
    You may be able to use only 128GB on the 200GB HD. Look at these links.
    What Macs natively support large IDE drives? (over 128GB formatted)
    http://forums.xlr8yourmac.com/action.lasso?-database=faq.fp3&-layout=FaqList&-re sponse=answer.faq.lasso&-recordID=34188&-search
    How Big a Hard Drive Can I Put in My iMac, eMac, or Power Mac?
    http://lowendmac.com/macdan/05/1024.html
    Using 128 GB or Larger ATA Hard Drives
    http://docs.info.apple.com/article.html?artnum=86178
    The Power Mac Storage FAQ
    http://www.omgili.com/preview/aHR0cDovL2ZvcnVtcy5tYWNubi5jb20vc2hvd3RocmVhZC5waH A/dD0yNDYzOTE=
     Cheers, Tom

  • How to call a BI Query (side panel) with selections provided by "tags"?

    With regards to my previous post (has anyone already successfully integrated their own BI report in a side panel?) we're still not there yet. What we actually would like to do is call a BI Query in the side panel and have the variable for that report filled automatically via "wiring" (using a tag).
    Basically we have a BI Query on a Transient Provider which "calculates" a couple of key figures with regards to a document number (shipment). The reason being before a shipment is to be "sent out" it should meet a couple of requirements (which are not immediately visible within the standard screens) concerning (sales) value, weight, etc...
    We have successfully "tagged" the shipment number in the transactions concerned (VT01N - VT03N). Now, as per my previous post if we just add the BI Query as an analytic list component (WDC_BS_ANLY_LIST_ALV) we seem to be getting errors (as the variable is not passed on). To avoid the error, we have added a search component (FPM_SEARCH_UIBB).
    So, now we get a "selection screen" in which we manually need to fill a shipment number and when we do, the results are correctly displayed.
    Obviously, we would like to have this "variable" assignment to be done automatically via the tag.
    What are we missing here?

    found this document on using the FPM_SEARCH_UIBB http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/f07c2765-4ee8-2e10-759b-ea7429a430bb?QuickLink=index&…
    if only such a (extremely detailed) document would exits on passing on the "tag" to the BI query variable (as that is not as straight forward)

  • How can I expand the source panel on the Import dialog window (mac LR3.3)?

    Hello,
    How can I expand the source panel to the right under the Import dialog window?
    I'm unable to drag the seperation line to the right and therefor unable to view folder names when in lower hirarchy...
    thanks you
    shlomit

    Shlomit Heymann wrote:
    shouldn't there be at least a scroling bar from left to right? How am I suppose to view my sub folders names?
    To a lesser extent, the same problems exists on all panels, whether they be in import window or elsewhere. Just look at the Folder panel in Library to see how much space is wasted in offsetting the subfolders. When this was pointed out to the relevant folk the reply came back that it was by design. Bad design, but we're pi...g into a head wind trying to get it changed.

  • Please make it harder to lose the side panels

    Am I alone in this?
    Countless times I go to click on the scroll bar (left or right, doesn't matter) and instead I accidentally move the mouse "just a little too far" and click to hide the panel instead of clicking the scroll bar.
    The thing is, it wastes valuable time having to then go and unhide the panel and return back to what I was doing.
    Could we either make the scroll bar slightly wider (making it easier for me to "get it right") or perhaps have an option to only hide the panels by keystroke instead of by clicking on them? I do like to hide the panels ... but it's extremely rare because I need the panels there while I'm in the develop module in order to access presets or develop settings.
    Maybe in the develop module turn off the ability to hide the panels? (or, again, make it an option to do so)
    It would sure save me a lot of aggravation.

    >@Ian Lyons: I can't drag the panels but the scroll-wheel on my mouse works fine...far better than it did in LR1.
    Agree--when LR is on the main display, but the scroll wheel does NOT work for scrolling the panels when LR is on the 2nd display. I don't know if this is intentional or an oversight or just a situation I experience, but I have experienced it with all versions of LR and in both XP and Vista.
    Note that the scrolling of the side panels isn't the only thing that doesn't work properly with the scroll wheel when LR is on the 2nd display--the thumbnail panel doesn't scroll when on the 2nd display, either. However, using the scroll wheel to adjust brush sizes works fine on either display as does scrolling the thumbnails in the Grid view.

  • How do I only get certain questions appear in the quiz results?

    I have created a course through Captivate 6, throughout the course there are questions to guage the learners attention. There is also a quiz at the end. However, captivate includes on the questions throughout the course on the quiz results which I do not want to happen.
    Can anyone advise how I can only get certain questions appear on the quiz results please?

    Branch aware turns off the playbar in 6 (not in 7 any more, at least not for me).
    Could you explain more in detail what you want, because I don't understand it. You want the user to answer all questions, but the score should only show what? If you don't want some questions to have a score added to the Quiz total, you can indicate that in the Properties of that Question slide.
    And please, tell the exact number (3 versions of 6), and also if you have to report to a LMS?
    Lilybiri

Maybe you are looking for