How do I save a custom shape to use as a text box?

I've finally worked out how to define a custom shape. Is there any way to save it and use it in other documents?

Save the document in which it's defined as a template.
Every document created from this custom template will embed your custom shape.
Yvan KOENIG (VALLAURIS, France) mercredi 26 janvier 2011 11:30:30

Similar Messages

  • How do i save all my mail in my inbox and sent box?

    hello
    i am going to upgrade my OSX to Snow Leopard
    how do i save all my mail in my inbox and sent box then restore it when my new OSX is installed?
    thanks in advance
    tk

    It's always good to have a backup, but Snow Leopard should leave all your data intact, just install new OS components & updated Apple Apps.
    If you don't have room to back everything up...
    On Mail...
    First Quit Mail, then I'd backup these two Mail folders, by right clicking on them in the Finder, then choose Archive/Compress.
    Users/YourUserName/Library/Mail
    Users/YourUserName/Library/Mail Downloads
    (Could be a different folder here if you chose such in Mail Prefs)
    Right click on that Mail folder, choose archive, you'll get everything in the folder, and the folder itself in a file called Mail.zip, move it to a safe place, same for the Mail Downloads folder... only the plist is separate.
    /Users/YourUserName/Library/Preferences/com.apple.mail.plist
    For Address Book, quit AB...
    Files...
    /Users/YourUserName/Library/Preferences/com.apple.AddressBook.plist
    /Users/YourUserName/Library/Preferences/com.apple.AddressBook.abd.plist
    Folders...
    /Users/YourUserName/Library/Application Support/AddressBook/
    /Users/YourUserName/Library/Caches/com.apple.AddressBook/
    If you do have room to back everything up...
    Get carbon copy cloner to make an exact copy of your old HD to the New one...
    http://www.bombich.com/software/ccc.html
    Or SuperDuper...
    http://www.shirt-pocket.com/SuperDuper/

  • How do I save a video someone sent me in a text message on iphone 4s

    how do I save a video someone sent me in a text message on iphone 4s

    You save a video attachment to your Camera Roll: Tap the photo or
    video in the conversation, tap the box with the right leaning arrow , then tap Save Image or Save Video.

  • When you build an optic flare, how do you save it so you can use it in other projects .

    I built an optic flare in After Effects and I would like to use it in other projects. How do I save it so I can use it in other projects? and duplicate it.
    Thanks!

    Duplicate the AE project with the flare & rename it.  Open the renamed project and delete EVERYTHING that isn't associated with the flare.  Keep the comp and any nested comps you need to make it work.  Other comps, extraneous footage and solids can go.
    Now save it again.
    When you want it, import the renamed project into a new project.

  • How can i save videos in iphone 4s using itunes?

    How can i save videos in iphone 4s using itunes?

    what kind of videos? recorded videos using camera or movies/tvshows?

  • How can I save a picture to my photos that was texted to me on iPhone5 IOS7?

    How can I save a picture to my photos that was texted to me on iPhone5 IOS7?

    Open the text, tap on the picture - then hit the icon on the bottom left - you'll see a bunch on options.

  • How do I change the font size and color in a text box?

    How do I change the font size and color in a text box?

    Really frustrating to find the first time but simple once you figure it out. I think I spent hours trying to find this. Simply right click on a blank spot in the toolbar up top and select Properties Bar. There it is! The available properties will change depending on whether you have the content (text) selected or the box itself.
    I haven't found a way yet to make it show up as a regular part of the toolbar. It floats around and gets in the way so I don't leave it on and then have to open it again when I need it. Again - frustrating; but at least it's there!

  • How can I make the Label go on top of the Text box?

    How can I make the Label go on top of the Text box?
    Thanks again,
    Doug

    Set the Label Horizontal / Vertical Alignment property for the textarea to Above.

  • How do enable document rights so i can put in a text box on pdf document?

    I have a scanned document which has been saved as pdf.
    I need to add a text box where I will write a name.   Afterwards, I would like to print it out.
    But,when I clicked on the "text box tool" and "pencil eraser tool" under tools, there is a message that states "*Only available when document rights is enabled".  See below.
    How do I enable document rights so I can add a text box to a saved pdf?

    Hi ianb766993,
    It sounds as though you have the PDF open in Reader, which doesn't have the same editing capabilities that Acrobat has. Did you use Acrobat to create the PDF from the scanned document or did you receive the PDF from somebody else? If you have Acrobat, please make sure that you're opening the PDF in Acrobat if you want to edit it.
    If you don't have Acrobat, feel free to download a 30-day trial from http://www.adobe.com/products/acrobat.html. Then, you can open the PDF in Acrobat, make the changes that you want using the editing tools, and print the updated PDF.
    Best,
    Sara

  • How can I save a Custom Workspace in Illustrator CC?

    I believe I've found a major bug in Illustrator CC ...or to put it more aptly...what appears to be an omission. The help topic path that tells how to save a custom workspace in previous versions does not exist in Illustrator CC. Has this option been reconfigured or simply forgotten? Please enlighten me if you have the answer. I'm using a Trial Version.

    You can easily find the location of the new document profiles. When setting up a new document, go to the menu of profiles, then select "Brwose". THis takes you directly to the folder.
    Use your operating system's tools to display that folder in the Windows Navigator.
    MeadeBaron wrote:
    I think I'll defer to someone who knows Illustrator really, really well for the answer
    answers here can only be as precise as your questions.

  • How to create a transparent custom shape on a patterned background?

    Hello,
    I've searched the forums and google and cannot seem to find a tutorial for what it is I want to do. I have a document with guides (card template) and I want to create the same design on each grid. I want the grids to have a patterened background and I want a custom shape within it. But, I want the custom shape to be transparent, not to the background, but going through the background. Like a cookie cutter. I want the custom shape to make a hole through the patterend background, leaving nothing in its place. I'm working with CS6 and can't seem to find a tutorial on how to do this. When I create the shape and make it transparent, I can see the background which isn't what I want. I want to go through the background layer and I'm being prompted to rasterize the layer when I've tried doing so. Help is much appreciated!!!

    You've gone two hours without a reply, and I suspect that is because you are not specific enough with your description of what you want to achieve.  I'll try but I will be guessing some of it...
    Make the shape you need to produce the pattern, with transparency for the area you need to 'punch through' as you put it, the background.
    Define that shape as a pattern, and fill a layer with it using the Piant buck set to pattern.
    Now control click the pattern layer to load it as a selection > Invert the selection, and add a layer mask to the underlying layer.  This should show throw to the lower layer(s)
    If I am not there, try uploading the Shape image you want to use as a pattern, and a screen grab of your image showing the layers panel.

  • How do you save a custom search filter for projects/ library?

    Is there a way to save a customized default for the way I will use search filter options?
    I've looked everywhere... It seems the seach filter for every project just wants to behave on it's own accord. 
    Most of the time, I just want to search different projects the same way with one, filtered result!   

    The Filter settings are sticky.  Every container listed on the Library tab of the Inspector keeps it's own Filter settings, set to whatever was last used.
    I'm not aware of any way to set a default Filter.
    You could create a Folder and put a Smart Album in that Folder with "Source" set to the Folder.  Any Albums or Projects you put in the Folder become the superset for the Filter you set in the Smart Album.  This is a pretty sophisticated set-up, however.  What is the filter you need, and how often do you need it?

  • How do you save a custom voicemail greeting when upgrading?

    Upgrading my iPhone 5s to a 6 plus and need to save my custom voicemail greeting which was recorded by a celebrity. Don't  know the custom voicemail greeting is stored and don't want to lose it.

    Hey Reindeerdad!
    If you are just looking to preserve that greeting, you could try www.SaveMyVM.com.  They can create a digital recording of that greeting for you.
    However, there is also some third-party software you can install on your mac that gives you the ability to extract voicemail messages from your iPhone.  I'm not sure if it works for greetings, but I think it probably would here is a link: How To: Save Your iPhone's Voicemails For Safekeeping | pinglio
    I hope that helps!
    ~S

  • How do I save an MP3 into iTunes using an iPad?

    I'm using an iPad 1 and there's an MP3 on a web site I like. How can I save it to iTunes?

    i have some more info I can add to my problem
    if I login to the podcast website from a windows7 pc using firefox, and I try to download the MP3 I can make two choices. I can click on the link to listen to the podcast in the broswer. Or I can right click and select "save link as" to save the MP3 locally.
    the link is.   http://www.jimrome.com/member/stream-link?stream=2011-04-22&site=jimrome&type=download_show&clips=1
    If i chose to "save link as" it will direct me to the .MP3 file to download.  And if I do this on my BB Torch it will do a similar thing. It will ask me if I want to play or save the .mp3 file.
    but if I navigate to that linkk with my playbook, and I hold over the link and select "Save link as". It doesn't save the .mp3 file.  it only saves the link ...."http://www.jimrome.com/member/stream-link?stream=2011-04-22&site=jimrome&type=download_show&clips=1"
    so on my playbook, my only option is to stream the file, because even if I stream the mp3 it will play in a new tab. but I will still have no option to save it.  
    hope that helps..  please let me know if there is a work around.
    thanks
    p
    8100, 8900, 9800, and Playbook owner

  • How to create Image as Custom Property Type used in Configurable Web Part?

    I wanted to create custom configurable web part property for Image.
    Example - the screenshot of Image property used in Image web part is shown below:
    My goal is to create as many images as possible in custom configurable web part.
    I tried to write the code:
    [WebBrowsable(true),
    WebDisplayName("Example Photo"),
    WebDescription("Example Photo of the user"),
    Category("Custom User Profile"),
    Personalizable(PersonalizationScope.Shared)]
    public Image ExampleUserPhoto { get; set; }
    However, the result does not display Image configurable web part property.
    I wonder why the data type Image does not cause the custom web part to have Image configurable web part property.
    Other data types such as Boolean, Enum, Integer, String and DateTime can be used.
    How can I create Image as Custom Property Type used in Configurable Web Part?

    I have examined that context node __00 has been enhanced,and  has a class name  z___00. But  when I created a new attirubute by right click " Attributes" with wizard under context node __00.There is still  a error message "view is not enhaced or copied with wizard".
    But  when  I created a method  "getvaliation "  in the class of context node zcl__00, the attribute  'valiation' automatically created(at the same time the method "getvaliation' automatically  created for the attribute 'valiation') and I need not to create attibute 'validation' by wizard .  It seemed as if the problem is resloved. But when I make test for it in web ui .There is a runtime erro message.
    Do I need to make some configurations in  the business object layer  for the checkbox? but  the checkbox is only used as a flag  to decide whether a backgoud job is needed to be executed.
    Edited by: samhuman on Jun 22, 2010 10:31 AM

Maybe you are looking for