How do I save a file after getting an error in CS5?

I was working on Adobe Photoshop CS5 on my 64bit Windows 7 when I got the following message:
Adobe Photoshop CS5 has stopped working
A problem caused the program to stop working correctly. Windows will close the program and notify you if the solution is available.
How do a save the file before the program needs to close?
Can I just close the Windows pop-up displaying the error, or will that also close the program?
I have not saved the file in a while and I don't want to lose all the work I have done.
Please help!

By the time you see that error message, it is already too late. Photoshop has already crashed.
That's why the Auto Save feature in CS6 is so attractive,

Similar Messages

How do I save the file after I have converted it from pdf to word

HOW DO I SAVE A FILE AFTER I HAVE CONVERTED IT FROM PDF TO WORD

Hi,
After converting your file a box will appear on top of the window showing 'Download' option.
When click on that your file will be downloaded and it will show the notification at the bottom.
Click on arrow -> 'Show In Folder'.
It will direct you to the location where your file has saved.
Regards,
Florence

How do I save a file after altering white balance?

Adobe has previously supplied incorrect advice. Adobe has now told me to use this forum to seek the correct advice. I am trying to alter white balance on some shots. The originals are in RAW (actually Sony's ARW). So I alter the shots in Photoshop and save as a DNG file. This requires me to save to a new location- no problem. However, when I open the altered shot (saved as DNG), it has always reverted to the old (uncorrected) white balance. I have tried various ways of saving but this keeps recurring. Please does anyone know how I need to save the altered shots to "hold" the altered white balance. NB I have no need to retain the unaltered versions of the shots. Thanks

The originals are in RAW (actually Sony's ARW). So I alter the shots in Photoshop and save as a DNG file.
As Jon points out there's no reason to use DNG if your camera is supported by your version of the Camera RAW plugin:
Camera Raw plug-in | Supported cameras
The point of Camera RAW is to let you save color adjustments in a non-destructive way—the adjustments are saved as instructions rather than permanently applied to the image pixels. It's the digital version of an analog negative.
So you don't make the adjustments in Photoshop, you make them in Bridge or Lightroom and the adjustment instructions are saved either to an xml sidecar along with the file or in the Camera RAW database depending on your preferences (Bridge>Camera RAW Preferences). In Bridge you can make the adjustments, click either Done or Open, and the adjustments will be saved for that .CR2 image.
Here I've set a custom white balance, adjusted the exposure and clicked Done to save the settings. When I open the image now or in the future the "negative" will be "developed" using the saved white balance and exposure.
You can make additional adjustments in Photoshop, but those adjustments would not be saved with the .CR2 "negative". To use the image in other applications it has to be saved as a separate file (as a "positive")—.psd, .tiff, .jpg, etc. You can not place raw images in other apps like InDesign or Illustrator.

How do I save my files as psd to open in cs5 instead of elements?

Hello! I have both Photoshop Elements 8 and Photoshop CS5. I just made a logo and I am trying to save a psd file, but it will only allow me to open it in elements. Anyway I can change this to where it opens in cs5? Please help!

Debra,
Not sure about on the Mac, but the program that a file type Opens in, on a Windows computer, is predicated on the setting for that File Type in Control Panel>Folder Options>File Type. There, one can set the program, and establish that as the default.
With both PS and PSE, it will be the program, that was installed last (by default), but can be changed, as is needed.
As you have found out, one can also choose Open In, to determine the program to be used.
As a "for instance," I have PS on my computers, but for JPEG files, have those set to Open in Ulead's PhotoImpact, rather than Photoshop. For my PSD's, however, I have the setting to Photoshop.
Good luck,
Hunt

How to change data after getting an error in me51n,std purchase requisition

how to make input field editable after getting an error message in ME51N,std purchase requisition
Edited by: SQLFOLLOWER on Nov 18, 2009 1:00 PM

Try this
In user_command form...
LOOP AT IT_DATA.
IF CHECKBOX __MARK EQ 'X'.
write logic wht u want....
ENDIF.
ENDLOOP.

In iphoto, how do i save a photo after editing, in the same or higher file size, it's saves in a lower size

in iphoto, how do i save a photo after editing, in the same or higher file size, it's saves in a lower size

It's rather more complicated that this.
iPhoto is a lossless editor. You don't lose any quality on your shot in iPhoto.
The file size you see reported is the size of your iPhoto Preview: this is what gets used if you access the data via a media browser. It's a "good-enough-for-most-uses" version of the shot. Email it, upload to websites, use it in Presentation, Word processing file etc
If you want to set the quality yourself then Export the photo using the File -> Export command.
You can choose to export to Jpeg, Tiff or png. Tiff is lossless but the file sizes are up to 10 times larger. Jpeg allows you to choose different qualities: High, Medium or low. The difference is the amount of compression involved. High quality means very little compression. It's not unusual for photos exported at this setting to have a larger file size than the original.
Which setting you choose depends on the use you intend. Further editing, printing then high is important. Sending to Facebook? Well low will do just fine there as they're going to trash the file anyway.
But the key point: the file size only becomes an issue when you export.
Regards
TD

I am not able to download ITunes. I had some problems with ITunes and had to uninstall but now when I reinstall iTunes after I click on download iTunes and save the File, I get this message"Thank you for downloading iTunes" and nothing else happens. I don

I had some problems with ITunes and had to uninstall but now when I reinstall iTunes after I click on download iTunes and save the File, I get this message"Thank you for downloading iTunes" and nothing else happens. I don't see any thing else. Now not sure what else I have to do.
Thanks,
Ranjit

See the further information area of Troubleshooting issues with iTunes for Windows updates.
tt2

Time machine: I get the following message: The backup disk image "/Volumes/Data-1/Clemens's iMac.sparsebundle" is already in use - what to do? Where and how do I find that file and get rid of it?

time machine: I get the following message: The backup disk image “/Volumes/Data-1/Clemens’s iMac.sparsebundle” is already in use - what to do? Where and how do I find that file and get rid of it?

I'm on Mountain Lion and have version 6.1 of AirPort utility so there is no button to "Disconnect All Users"and the only other option of "removing and re-selecting the drive via Time Machine Prefs" doesn't work either. So this will work.
Launch Airport Utility and select the TC "Edit" button, then select the Disks tab. Deselect "Enable File Sharing" and click "Update". The TC will reboot then follow the same procedure and reselect "Enable File Sharing" and click "Update". After TC reboots again you'll be up and running. Not the neatest way to do it but saves having to unplug the TC which risks disk damage and the whole procedure takes less than a minute.The "Enable File Sharing" button seems to have replaced the "Disconnect All Users" button but with the slight disadvantage that it reboots the TC which takes up additional time.

How do I save PDF files by default to the folder of the source file?

How do I save PDF files by default to the folder of the source file with Acrobat 9.0.0 Standard?

I am not seeing that behaviour. If I right-click a link to a .pdf file, I get the file saved with the original filename.
Maybe one of the settings in about:config controls that?
pdfjs.previousHandler.preferredAction is a setting that has a value of 4 with my setup. I have no idea what that means, and I could not find any explanation anywhere. You could try using different numbers for that value and see if any make any difference. Why has nobody bothered to explain that setting anywhere?

How do I save a file in the Dreamweaver CC folder on my computer's hard drive?

Hi,
I bought Dreamweaver CC. I am trying to put a flash button in Dreamweaver that will like to another web site.
The problem I am running into is when I try to save the flash button into my computer's Dreamweaver folder,
I get a message saying "Contact your Administrator" because it won't save in that location.
I know that I need to save it in the Dreamweaver folder so it has the same path so the flash button with a link will work.
How do I save a file I want to put in a Dreamweaver page into my Dreamweaver CC folder? I keep getting that
contact your Administrator message.
Please help,
John

Teacher of Students wrote:
How do I save a file I want to put in a Dreamweaver page into my Dreamweaver CC folder?
John
Honestly, you don't.
DW is meant to be used with an individual "Local Root Folder" for each site you create with it. You should never have a reason to save into the DW program folders. Take a minute to go over creating a Site Definition in DW...
http://tv.adobe.com/watch/learn-dreamweaver-cs5/gs01-defining-a-new-site/

How do I save a file as an unformatted txt file instead of html or rtf?

How do I save a file as an unformatted txt file instead of html or rtf?

Use menu Image>Image Size in the image size dialog uncheck Resample and enter 300 in the resolution field and click OK. Note no Pixels are changed only the resolution setting get changed. The use Menu Fils>Save As in the save as dialog use the file type pull down and select Tiff then click Save
In the Tiff Option Dialog in the Image Compression section set None The click OK.

In Pages how do I save a file with another name

In Pages how do I save a file with another name?

I don't know if there is a less cumbersome way to do this (I'm still pretty new to Lion) but This is what I do - since "Save As" seems to be gone with Lion.
I create a duplicate document - then click the red button to close the document - and a dialog box pops up and asks if you want to save the changes - I change the name in there and then save the file under the new name.
You can also save the copy to the desktop - get info - and then change the name if the finder window.
I copied this from the Pages help area. These help instructions were created pre-Lion I'm sure.
Saving a Copy of a Document
If you want to make a copy of your document—to create a backup copy or multiple versions, for example—you can save the document using a different name or location. (You can also automate saving a backup version, as Automatically Saving a Backup Version of a Document describes.)
To save a copy of a document:
Choose File > Save As and specify a name and location.
The document with the new name remains open. To work with the previous version, choose File > Open Recent and choose the previous version from the submenu.

How do I save PDF files on my iPad to read later?

How can I save PDF files from a website on iBooks to read later?

Open the PDF in Safari and then tap it and you should get a bar at the top of it with 'open in iBooks' as an option - tap that and it should be copied to the iBooks app.

I have pages on my MAC, friends cannot open. How do I save a file so a Microsoft Word user can open it?

I have Pages on my MacBook Air, friends cannot open when I send as an attachment to an e-mail. How do I save a file so a Microsoft Word pc can open.

Welcome to the Apple Support Communities
Pages documents can only be read on another iPhone, iPod touch, iPad or Mac with Pages installed. To make a document compatible with Microsoft Word, you just have to export the document.
To do that, just open the document with Pages, and then, go to File menu > Export > Word, and after exporting that document to Word format, just send it

How do I open CS4 files after Upgrading to Cloud? The older files are showing up gray and won't open

How do I open CS4 files after Upgrading to Cloud? The older files are showing up gray and won't open.

InDesign files are compatible wih all the newer versions. A cs4 file sh
Could you answer a few questions to help us better understand the issue:
If you are trying to open the files by double clicking them, do they give any error??
Have you tried to drag a file into indeisgn, if yes what happends when you do that??
Is there any error message that you get??
Also if you create a new files in InDesign CC does it show up as grey like the cs4 files or do they open fine??

How do I save a file after getting an error in CS5?

Similar Messages

Maybe you are looking for