How do I save ALV Grid O/P to spool
Hi All,
I have a requirement of saving alv grid output to spool. How can this be done?
could I get any help on this?
Thanks & Regards,
Deepak Raj
DATA: BEGIN OF i_mara OCCURS 0,
matnr LIKE mara-matnr.
DATA: END OF i_mara.
DATA: v_dest LIKE tsp01-rqdest,
v_handle LIKE sy-tabix,
v_spool_id LIKE tsp01-rqident,
v_rc TYPE c,
v_errmessage(100) TYPE c,
v_text(70) TYPE c.
START-OF-SELECTION.
SELECT matnr FROM mara INTO TABLE i_mara.
CALL FUNCTION 'RSPO_OPEN_SPOOLREQUEST'
EXPORTING
dest = 'LOCL'
layout =
name =
suffix1 =
suffix2 =
copies =
prio =
immediate_print =
auto_delete =
titleline =
receiver =
division =
authority =
posname =
acttime =
lifetime = '8'
append =
coverpage =
codepage =
doctype =
importing
handle = v_handle
spoolid = gd_spool_nr
rc = v_rc
errmessage = v_errmessage.
LOOP AT i_mara.
v_text = i_mara-matnr.
CALL FUNCTION 'RSPO_WRITE_SPOOLREQUEST'
EXPORTING
handle = v_handle
text = v_text
length =
codepage =
truncate =
importing
rc = v_rc
errmessage = v_errmessage
EXCEPTIONS
handle_not_valid = 1
OTHERS = 2.
IF sy-subrc 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
ENDLOOP.
CALL FUNCTION 'RSPO_CLOSE_SPOOLREQUEST'
EXPORTING
handle = v_handle
IMPORTING
rc = v_rc
errmessage = v_errmessage
EXCEPTIONS
handle_not_valid = 1
OTHERS = 2.
IF sy-subrc 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
CALL FUNCTION 'CONVERT_ABAPSPOOLJOB_2_PDF'
EXPORTING
src_spoolid = gd_spool_nr
no_dialog = c_no
dst_device = c_device
IMPORTING
pdf_bytecount = gd_bytecount
TABLES
pdf = it_pdf_output
EXCEPTIONS
err_no_abap_spooljob = 1
err_no_spooljob = 2
err_no_permission = 3
err_conv_not_possible = 4
err_bad_destdevice = 5
user_cancelled = 6
err_spoolerror = 7
err_temseerror = 8
err_btcjob_open_failed = 9
err_btcjob_submit_failed = 10
err_btcjob_close_failed = 11
OTHERS = 12.
CHECK sy-subrc = 0.
get the spool number
Declaration of local variables.
DATA:
lv_rq2name LIKE tsp01-rq2name.
CONCATENATE sy-repid+0(8)
sy-uname+0(3)
INTO lv_rq2name SEPARATED BY '_'.
Get the spool number.
SELECT * FROM tsp01 WHERE rq2name = lv_rq2name
ORDER BY rqcretime DESCENDING.
v_rqident = tsp01-rqident.
EXIT.
ENDSELECT.
IF sy-subrc NE 0.
CLEAR v_rqident.
ENDIF
Similar Messages
-
How to send the ALV GRID output to spool by using the print button in std t
How to send the ALV GRID output to spool by using the print button in standard tool bar.
We have created a button in the va02 transaction. If user click on the button the new screen will be display on that screen we are populating the alv grid output using the oops concept. But i am unable to send the output to spool using the print button in the standard tool bar.
I am able to display the Print parameter dialog box but i am not able to send it to spool.
Kindly help.
Thanks In Advance.
G.V.RamanaHi Shaik,
There is not properties button in my print screen.
MODULE user_command_0900 INPUT.
WHEN 'EXCEL'.
PERFORM excel_download.
WHEN 'PRI'.
PERFORM print_output.
form Print_output.
CALL FUNCTION 'RSPO_LIST_LAYOUT_FITS'
EXPORTING
columns = 80
device = 'ANY '
lines = 65
maxpenality = 1999
TABLES
layouts = lt_layouts1
EXCEPTIONS
unknown_device = 1
OTHERS = 2.
IF sy-subrc = 0.
LOOP AT lt_layouts1.
IF lt_layouts1-penality < 1000 AND
lt_layouts1-penality < l_min_penality.
l_layout = lt_layouts1-layout.
l_min_penality = lt_layouts1-penality.
ENDIF.
ENDLOOP.
IF NOT l_layout IS INITIAL.
CALL FUNCTION 'GET_PRINT_PARAMETERS'
EXPORTING
mode = 'CURRENT'
line_size = 80 "#EC *
new_list_id = l_new_list_id
no_dialog = l_no_dialog
layout = l_layout
IMPORTING
out_archive_parameters = rs_arc_params
out_parameters = rs_pri_params
valid = l_valid
EXCEPTIONS
archive_info_not_found = 1
invalid_print_params = 2
invalid_archive_params = 3
OTHERS = 4.
IF sy-subrc NE 0. " INS SLIN
ENDIF. " INS SLIN
IF rs_pri_params-linsz LT 80 OR
rs_pri_params-linsz LT gt_stack-s_lprint-width.
gt_stack-print_line_break = 'X'.
ELSE.
CLEAR gt_stack-print_line_break.
ENDIF.
IF l_valid NE 'X'.
rs_pri_params = ls_pri_params_sav.
rs_arc_params = ls_arc_params_sav.
ENDIF.
ENDIF.
ENDIF.
endform. " Print_output
CALL METHOD gv_cost_tot_alv_grand->set_table_for_first_display
EXPORTING
is_layout = gs_layout_cost_tot_grand
CHANGING
it_fieldcatalog = gt_fcat_cost_tot_grand[]
it_outtab = gt_cost_tot_grand[].
Please check my code -
Save ALV grid to local excel-file in background
Hi,
i want to save a alv grid to an excel-file on a local fileshare using an background job..
Does anybody know how this works?
Thanks aheadDATA: file TYPE string VALUE `flights.dat`,
wa TYPE spfli.
FIELD-SYMBOLS TYPE x.
OPEN DATASET file FOR OUTPUT IN BINARY MODE.
SELECT *
FROM spfli
INTO wa.
ASSIGN wa TO CASTING.
TRANSFER TO file.
ENDSELECT.
CLOSE DATASET file.
<b>The binary data from database table SPFLI is transferred to a binary file flights.dat</b> -
How to create editable ALV grid/list
Hi,
I want to create editable ALV grid/list so that user can modify the data in the ALV.
And when user presses save button data will get saved in Z table.
I dont know how to create editable ALV so could anybody please help me regarding this?
Thanks & regards,
Sameer DhukeHI
check the demo programs BCALV_FULLSCREEN_GRID_EDIT
BCALV_GRID_EDIT
BCALV_TEST_GRID_EDIT_01
BCALV_TEST_GRID_EDITABLE
REUSE_ALV_GRID EDITABLE
ALV Grid editable fields
Just to make things a bit easy
In the layout,there is a property called edit, make it 'X' for the particular field whichever you want to make editable.
Hope this helps,
Suruchi
Message was edited by:
Suruchi Mahajan -
How to get the alv grid report in another screen when double click on basic
Hi.
I have created an alv report using class cl_gui_alv_grid.I got another report in the same screen,when double clicked on basic list(using double_click event).I want to get this report in another screen.What i have to do?(In classical reports i worked with sy-lsind = 1 ,but how to do here?)
How to set color to the selected rows in the alv grid report?I worked with change_data_from_inside method of cl_gui_alv_grid.But it didn't work out..
With Regards,
Ramana.On double click event . you will have to call another screen say 9000.
now within screen 900 PBO.. you will have to prepare the fieldcatalog/layout.. and the table to be displayed there.
in PAI of screen 9000, you can return to the original ALV.
method double_click.
call screen 9000.
endmethod.
" now in PBO create a module display_alv2
module display_alv2.
'prepare the fieldcat/layout info for new alv
'add the data to the new ALV table
'instantiate the grid call.. etc
'call the ALV
endmodule
"in PAI
module exit.
case sy-ucomm.
when 'ENT1'.
leave to screen 0.
endcase.
endmodule
while preparing the field catalog you can mention the EMPHASIZE field, whish will give color to tht column
E.g
*--Service Order
ls_fieldcat-tabname = 'IT_FINAL_VALID'.
ls_fieldcat-fieldname = 'AUFNR'.
ls_fieldcat-scrtext_m = 'Service Order'.
ls_fieldcat-ref_table = 'AUFK'.
ls_fieldcat-ref_field = 'AUFNR'.
ls_fieldcat-col_pos = 1.
ls_fieldcat-outputlen = 12.
ls_fieldcat-emphasize = 'C400'. "This will add color to the cell
APPEND ls_fieldcat TO fcat_valid.
Hope this helps. -
How to read a alv grid row data from standard program
Hi All,
I am working on transaction LBK1. Actually when you will open this transaction in the left hand side it will show you the data in tree. When you click on a notification node it will show the relevant data in right side. In which there is a operation tab . In this tab the data comes in alv grid. If user selects a row then I have to get that selected row value. There is also a toolbar above on the tree side. There are some buttons which execute our implementation class where I can put the code.
Can anyone please help me out? How I can read that selected row in our class/method?
Thanks in advance.
Best Regards
RituSetting and getting selected rows (Columns) and read line contents
You can read which rows of the grid that has been selected, and dynamic select rows of the grid using methods get_selected_rows and set_selected_rows. There are similiar methods for columns.
Note that the grid table always has the rows in the same sequence as displayed in the grid, thus you can use the index of the selected row(s) to read the information in the rows fronm the table. In the examples below the grid table is named gi_sflight.
Data declaratrion:
DATA:
Internal table for indexes of selected rows
gi_index_rows TYPE lvc_t_row,
Information about 1 row
g_selected_row LIKE lvc_s_row.
Example 1: Reading index of selected row(s) and using it to read the grid table
CALL METHOD go_grid->get_selected_rows
IMPORTING
et_index_rows = gi_index_rows.
DESCRIBE TABLE gi_index_rows LINES l_lines.
IF l_lines = 0.
CALL FUNCTION 'POPUP_TO_DISPLAY_TEXT'
EXPORTING
textline1 = 'You must choose a valid line'.
EXIT.
ENDIF.
LOOP AT gi_index_rows INTO g_selected_row.
READ TABLE gi_sflight INDEX g_selected_row-index INTO g_wa_sflight.
ENDIF.
ENDLOOP.
Example 2: Set selected row(s).
DESCRIBE TABLE gi_index_rows LINES l_lines.
IF l_lines > 0.
CALL METHOD go_grid->set_selected_rows
exporting
it_index_rows = gi_index_rows.
ENDIF. -
How to use two ALV grids in a single program (pl read below for details)?
Please read thoroughly::
I have an ALV report using REUSE_ALV_GRID_DISPLAY.
On the output of this report, when I click on a "change" button, a couple of columns should be made editable.
I achieved this by modifying the fieldcatalog and triggering the output with another REUSE_ALV_GRID_DISPLAY.
When I click on the back button of this second report, it is still taking me to the first one.
How to over come this?
Note:
I used custom containers etc but the default buttons on the container are not controllable. I added custom buttons but could not suppress the default ones. So I did not pursue this much even though this is more comfortable to use.
I am not able to get into the code in debug to see how the default buttons like COPY, INSERT ROW etc are working.
Can any body throw some inputs into this?
Thanks,
Ven.>I achieved this by modifying the fieldcatalog and triggering the >output with another REUSE_ALV_GRID_DISPLAY.
>When I click on the back button of this second report, it is still >taking me to the first one.
>How to over come this?
For this there is a solution
i am thinking you are using user_command and calling the second time ALV Grid if so check this.
form user_command using r_ucomm type sy-ucomm selfield type slis_selfield.
case r_ucomm.
when 'CHANGE'.
selfield-exit = 'X'. "use this , this will solve the problem
"i hope you are calling the Function here
endform. -
How to kill an alv-grid object and refresh the frontend
Hello experts,
i have created an alv-grid display!
now i want to hide the whole alv-table on the screen when user e.g. hits a button!
How can i kill this object and refresh the frontend?
Thanks a lot,
MarcelHello Marcel
For this requirement I would use the following approach:
(1) main screen '0100': here you display your ALV grid
(2) Define a dummy screen '0101' the user will never see
(3) Link the container for the ALV grid (e.g. go_docking) to the dummy screen when the user pushes the HIDE button (method LINK)
(4) Link the container back to your main screen when the user pushes the DISPLAY button
I never ever destroy a grid control and re-build it from scratch but always use either of its methods REFRESH_TABLE_DISPLAY or SET_TABLE_FOR_FIRST_DISPLAY.
Regards
Uwe -
How to learn about ALV Grid?
Hi Experts,
I dont about ALV grid and how to implement it.So can anyone let me know how to implement the simple basic ALV grid with example?
Please explain me with set by step procedure.
Thanks a lot in Advance,
Regards,
Raghuhi,
Process to create ALV with OOPs:
Step 1:
Create a container. There are 2 type of containers: docking and custom.
Go to SE38.Create a program. Use Pattern button to create object for docking container. Click ABAP Object Pattern radio button. Click Create object radio button. Give Instance as o_docking and class as cl_gui_docking_contianer.
Step 2:
Create a grid inside the container.
Use Pattern button to create the same. Make the parent of grid as container.
Click ABAP Object Pattern radio button. Click Create object radio button. Give Instance as o_grid and class as cl_gui_alv_grid. Create object o_grid.
Step 3:
Call the function lvc_fieldcatalog_merge to get the field catalog.
Pass the structure name.
Step 4:
Call the method of grid set_table_for_first_display to display the output.
Click ABAP Object Pattern radio button. Click Call Method radio button. Give Instance as o_grid and Class/Interface as cl_gui_alv_grid and Method as set_table_for_first_display.
w_variant-report = sy-repid.
Call method o_grid->set_table_for_first_display
Step 5:
Fill the internal table itab with values by using logic.
select * from mara into table itab up to 100 rows.
call screen 9000.
Create a screen by double clicking 9000 in the above line. Fill the description for the screen. In the flow logic, uncomment the PBO and PAI module and create those in main program (for simplicity).
Step 6:
Create GUI status. Create GUI Title if required. That can be done by using display object List (CtrlShiftF5).Then in left side, right click the program and create GUI Status and Title.
Step 7:
Free the memory occupied once the BACK, EXIT or CANCEL button is clicked. Use Pattern button to call the method FREE of cl_gui_alv_grid and cl_gui_docking_container.
Click ABAP Object Pattern radio button. Click Call Method radio button. Give Instance as o_grid and Class/Interface as cl_gui_alv_grid and Method as Free.
Similarly Click Call Method radio button. Give Instance as o_docking and Class/Interface as cl_gui_docking_container and Method as Free.
Also follow these links.
1. Please give me general info on ALV.
http://www.sapfans.com/forums/viewtopic.php?t=58286
http://www.sapfans.com/forums/viewtopic.php?t=76490
http://www.sapfans.com/forums/viewtopic.php?t=20591
http://www.sapfans.com/forums/viewtopic.php?t=66305 - this one discusses which way should you use - ABAP Objects calls or simple function modules.
2. How do I program double click in ALV?
http://www.sapfans.com/forums/viewtopic.php?t=11601
http://www.sapfans.com/forums/viewtopic.php?t=23010
3. How do I add subtotals (I have problem to add them)...
http://www.sapfans.com/forums/viewtopic.php?t=20386
http://www.sapfans.com/forums/viewtopic.php?t=85191
http://www.sapfans.com/forums/viewtopic.php?t=88401
http://www.sapfans.com/forums/viewtopic.php?t=17335
4. How to add list heading like top-of-page in ABAP lists?
http://www.sapfans.com/forums/viewtopic.php?t=58775
http://www.sapfans.com/forums/viewtopic.php?t=60550
http://www.sapfans.com/forums/viewtopic.php?t=16629
5. How to print page number / total number of pages X/XX in ALV?
http://www.sapfans.com/forums/viewtopic.php?t=29597 (no direct solution)
6. ALV printing problems. The favourite is: The first page shows the number of records selected but I don't need this.
http://www.sapfans.com/forums/viewtopic.php?t=64320
http://www.sapfans.com/forums/viewtopic.php?t=44477
7. How can I set the cell color in ALV?
http://www.sapfans.com/forums/viewtopic.php?t=52107
8. How do I print a logo/graphics in ALV?
http://www.sapfans.com/forums/viewtopic.php?t=81149
http://www.sapfans.com/forums/viewtopic.php?t=35498
http://www.sapfans.com/forums/viewtopic.php?t=5013
9. How do I create and use input-enabled fields in ALV?
http://www.sapfans.com/forums/viewtopic.php?t=84933
http://www.sapfans.com/forums/viewtopic.php?t=69878
10. How can I use ALV for reports that are going to be run in background?
http://www.sapfans.com/forums/viewtopic.php?t=83243
http://www.sapfans.com/forums/viewtopic.php?t=19224
11. How can I display an icon in ALV? (Common requirement is traffic light icon).
http://www.sapfans.com/forums/viewtopic.php?t=79424
http://www.sapfans.com/forums/viewtopic.php?t=24512
12. How can I display a checkbox in ALV?
http://www.sapfans.com/forums/viewtopic.php?t=88376
http://www.sapfans.com/forums/viewtopic.php?t=40968
http://www.sapfans.com/forums/viewtopic.php?t=6919
Hope this helps, Do reward. -
How to increase the alv grid size dynamically
Hi all,
I have to develop the report with the following requirement:
I have to take bwkey from t001k on basis of bukrs and bwkey. this bukrs and bwkey are entered in selection-screen.
I have to select matnr, lbkum, salk3 from mbew on basis of bwkey in selection-screen.(this is select options)
now the ouput should be as follows:
for example :
ef01 efo2 ef03
matnr lbkum salk3 lbkum salk3 lbkum salk3 total
700001 3 4 0 0 0 0 7
700010 0 0 2 1 0 0 3
The output should be as mentioned above.
In the above output,
in the first record for 700001, the total of 3 and 4 is displayed as total 7 and
for 700010 , it is displayed as 3.
the get the output as above in the alv grid,
I have taken bwkeys in t001k and remaining fields from mbew and joined them in final internal table.
now in the final table ifinal, i have the following fields,
matnr lbkum salk3 bwkey total.
now when i want to display the output, it is displaying as normal output like
mantr bwkey lbkum salk3 total
700001 etap 3 4 7
700002 etap 1 2 3
but i want to display in the first mentioned format.
so i tried to attach the bwkey values in it001k(this is internal table for t001k) for the final field catalog so that this bwkeys are displayed as column headings in the final output. but it is not displaying.
Please suggest me the solution to display the output in the above first mentioned
format as soon as possible
points will be awarded.
thanking u in advance.
A.Srinivashi ,
u can set the row count to any number , here I am setting it to 5 using the method set_visible_row_count
1 Change the visible row count to u20185u2019
DATA lo_cmp_usage TYPE REF TO if_wd_component_usage.
lo_cmp_usage = wd_this->wd_cpuse_alv( ).
IF lo_cmp_usage->has_active_component( ) IS INITIAL.
lo_cmp_usage->create_component( ).
ENDIF.
DATA lo_interfacecontroller TYPE REF TO iwci_salv_wd_table .
lo_interfacecontroller = wd_this->wd_cpifc_alv( ).
DATA lo_value TYPE REF TO cl_salv_wd_config_table.
lo_value = lo_interfacecontroller->get_model(
lo_value->if_salv_wd_table_settings~set_visible_row_count( '5' ).
u can also go thru this useful links for CONFIGUIRING ALV :
http://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/40794172-b95a-2910-fb98-b86d8a0918b4;jsessionid=(J2EE3417400)ID0488867050DB10849380333905377829End
SAP List Viewer (ALV) [original link is broken]
Configuring ALV
http://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/1190424a-0801-0010-84b5-ef03fd2d33d9?overridelayout=true
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/db22242d-0701-0010-28a2-aeaa1fefd706;jsessionid=(J2EE3414800)ID0133346050DB00727847586176044227End?overridelayout=true&bcsi_scan_06B6B0A4B65849C2=0
I hope it shud solve ur query.
regards,
amit -
How to show an ALV grid in planning book (using macro-exit)
Hi Expertss,
I am using a macro-exit. Now in the execution flow of this macro-exit I am required to shaow an ALV grid. I tried calling a Zreport in which i am calling alv screen(screen type dialog box). It is giving a short-dump saying Exception condition "CNTL_ERROR" raised.
If i comments the fieldcatlog and structure name while calling the ALV in my Zreport then the alv is coming but then planning book is not vivible.
Kindly tell what thing I am missing and what probable thing I can do to make it work.
Thanks a lot in advance.I got the solution.
-
F4 help before save - ALV Grid in Module Pool
Hi,
I am calling an ALV Grid using CL_GUI_A;V_GRID. When I create a new record, I need F4 help for a particular field based on the entries in 2 other fields. Thing is I can't use DATA_CHANGED event coz then I won't be able to display the F4 button. And F4 option doesn't pass the data that has been changed(ER_CHANGED_DATA table). So frustrating. Can anyone help me plz???
Thanks in advance,
Poornima L NathanHi ,
i think you are missing one params while registering your F4 fields..
ls_f4-register = 'X'.
ls_f4-getbefore = 'X'.
ls_f4-chngeafter = 'X'.
Documentatin of SAP program *BCALV_EDIT_08*
* 1b. If the value range in your f4 help depends on other
* values of cells that are input enabled, set the
* GETBEFORE parameter.
now you can use row_indx no to read your internal table
regards
Prabhu
Edited by: Prabhu Peram on Aug 23, 2011 2:11 PM -
Hello All,
I want to print data on an alv grid to spool according the current layout using code.
Can anyone give me suggestion, maybe some sample code?
Thanks in advance,
AlexHi,
I have 2 ALV grid in the screen and pront to spool of both ALV's using OOp.
Please find sample code. Whenever report runs in the background i simply call this print subroutine after creating fieldcatalog, layout, sorting table etc.
FORM list_append TABLES ut_table
USING u_no TYPE char1
u_tabname TYPE slis_tabname.
IF u_no CA '13'.
MOVE 'TOP_OF_PAGE' TO ls_event-name.
CONCATENATE 'TOP_OF_PAGE' u_no INTO ls_event-form.
APPEND ls_event TO lt_events.
ELSE.
MOVE 'TOP_OF_LIST' TO ls_event-name.
CONCATENATE 'TOP_OF_LIST' u_no INTO ls_event-form.
APPEND ls_event TO lt_events.
ENDIF.
CALL FUNCTION 'REUSE_ALV_BLOCK_LIST_APPEND'
EXPORTING
it_fieldcat = lt_fieldcat
is_layout = ls_layout
i_tabname = u_tabname
it_events = lt_events
it_sort = lt_sort
* i_text =
TABLES
t_outtab = ut_table
EXCEPTIONS
program_error = 1
maximum_of_appends_reached = 2
OTHERS = 3.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
ENDFORM. " LIST_APPEND
* Form f_list_display
FORM f_list_display.
DATA ls_print TYPE slis_print_alv.
ls_print-no_print_selinfos = 'X'. " Display no selection infos
ls_print-no_print_listinfos = 'X'. " Display no listinfos
ls_print-reserve_lines = 2. " Lines reserved for end of page
CALL FUNCTION 'REUSE_ALV_BLOCK_LIST_DISPLAY'
EXPORTING
i_interface_check = ' '
is_print = ls_print
EXCEPTIONS
program_error = 1
OTHERS = 2.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
ENDFORM. " F_LIST_DISPLAY
May this will help you.
aRs
Message was edited by:
aRs -
How to print multiple ALV Grids with only one print dialog?
Hi,
I have a report that has multiple ALV grids in splitter containers. The users want to be able to print those ALVs by pushing only one print button. I got it to work (parameter IS_PRINT and method SET_FRONTEND_PRINT before calling SET_TABLE_FOR_FIRST_DISPLAY) but I can't find a way to avoid that the printer dialog pops up for every grid I print.
I tried to use the function module approach with REUSE_ALV_LIST_DISPLAY but have the same issue. Any thoughts?
Thanks,
GuentherHi Peluka,
Well, that's exactly what I am doing. Putting one central button in the app is not the problem; the issue is that the print dialog (to select the printer) pops up for every individual ALV grid. E.g. if I place 4 ALV grids on my screen and trigger their print from a central button, I am getting 4 print dialogs.
Cheers,
Guenther -
How to display 2 ALV grids in the output
Hi all
I have 2 internal tables with some data
i want to display 1st internal table data in one grid and 2nd internal table in the second grid in the same output screen with some headings
can anyone tell me how to do it
or can send the sample code
Thank youHi
see this program you can understand the flow very easily
*& Report ZAMIT_ALVOOPS
REPORT ZNNR_ALVOOPS_SCREEN.
tables: mara,spfli.
types: begin of ty_tab,
matnr type mara-matnr,
ernam type mara-ernam,
ersda type mara-ersda,
end of ty_tab.
DATA ITAB1 TYPE TABLE OF SPFLI.
DATA WA1 LIKE LINE OF ITAB1.
DATA IO1 TYPE SPFLI-CARRID VALUE 'AA'.
data itab type table of ty_tab.
data wa like line of itab.
DATA OK_CODE TYPE SY-UCOMM.
DATA: GRID TYPE REF TO CL_GUI_ALV_GRID,
CONT TYPE REF TO CL_GUI_CUSTOM_CONTAINER.
DATA: GRID1 TYPE REF TO CL_GUI_ALV_GRID,
CONTA TYPE REF TO CL_GUI_CUSTOM_CONTAINER.
CREATE OBJECT CONT EXPORTING CONTAINER_NAME = 'CONT1' .
CREATE OBJECT GRID EXPORTING I_PARENT = CONT .
CREATE OBJECT CONTA EXPORTING CONTAINER_NAME = 'CONT2' .
CREATE OBJECT GRID1 EXPORTING I_PARENT = CONTA .
selection-screen begin of block b1 with frame title text-100.
select-options: s_matnr for mara-matnr.
selection-screen end of block b1.
select matnr ernam ersda from mara into corresponding fields of table itab up to 15 rows
where matnr in s_matnr .
call selection-screen 100.
*& Module USER_COMMAND_0100 INPUT
text
MODULE USER_COMMAND_0100 INPUT.
if ok_code = 'PB1'.
leave to screen 0.
else.
leave to screen 100.
endif.
ENDMODULE. " USER_COMMAND_0100 INPUT
*& Module STATUS_0100 OUTPUT
text
MODULE STATUS_0100 OUTPUT.
SET PF-STATUS 'xxxxxxxx'.
SET TITLEBAR 'xxx'.
SELECT * FROM SPFLI INTO
CORRESPONDING FIELDS OF TABLE ITAB1 WHERE CARRID = IO1.
CALL METHOD grid->SET_TABLE_FOR_FIRST_DISPLAY
EXPORTING
I_BUFFER_ACTIVE =
I_BYPASSING_BUFFER =
I_CONSISTENCY_CHECK =
I_STRUCTURE_NAME = 'MARA'
IS_VARIANT =
I_SAVE =
I_DEFAULT = 'X'
IS_LAYOUT =
IS_PRINT =
IT_SPECIAL_GROUPS =
IT_TOOLBAR_EXCLUDING =
IT_HYPERLINK =
IT_ALV_GRAPHICS =
IT_EXCEPT_QINFO =
IR_SALV_ADAPTER =
CHANGING
IT_OUTTAB = itab.
IT_FIELDCATALOG =
IT_SORT =
IT_FILTER =
EXCEPTIONS
INVALID_PARAMETER_COMBINATION = 1
PROGRAM_ERROR = 2
TOO_MANY_LINES = 3
others = 4
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CALL METHOD GRID1->SET_TABLE_FOR_FIRST_DISPLAY
EXPORTING
I_STRUCTURE_NAME = 'SPFLI'
CHANGING
IT_OUTTAB = ITAB1.
ENDMODULE. " STATUS_0100 OUTPUT
<b>Reward if usefull</b>
Maybe you are looking for
-
HT3702 How can I remove those automatic purchases without disbaling the payment details?
my statement from the banks shows some automatic purchases from the apple store. I need to remove these without disabling my account or editting the payment details (as in remove my payment details) how do I do this? regards HK
-
Problem with stop PPC G5 Dual 2GB
Hi, i m new user. I have a problem with Dual G5 2,0GB. I dont know why my mac when do STOP at apple menu, it die. Dont start again. I tryed to reinstall OSX 10.5 and 10.5.6 But it does the same thing. There is somebody can help me what i do????? Than
-
When we define sales org, we have fields like ALE data for purchase order, Pur Org. Pur Grp, Vendor, Order type etc.. Please explain me the functionality of the same. Venkat
-
Seach table like tmsbuffer where I can find all date of transaction order
Hi I seach table where I can find all transaction order 'TRKORR' with all system 'SYSNAM' like this table and all date of creation of the order. The problem is I should use RFC connection for that and search this in table E070 and I don't want u
-
Im trying to buy Exportpdf but something is wrong and it doesnt direct me to pay it
Im trying to buy Exportpdf but something is wrong and it doesnt direct me to pay it