How do I save changes in text size

How do I save increases in text size. The zoom feature reverts to earlier setting when I change web page. I was not able to change font size using font setting under content tab in tools.

You can use an add-on to set the zoom level for all sites. For example, [https://addons.mozilla.org/en-US/firefox/addon/nosquint/ NoSquint] and [https://addons.mozilla.org/en-US/firefox/addon/default-fullzoom-level/ Default FullZoom Level].

Similar Messages

How to animate a change in text size...

I am creating a simple animated GIF in Photoshop. I want a line of text to start from a large size font and then scale down to a smaller size. Right now, if I scale the text manually, the text size changes in all my frames. How can I accomplish this?

In CS3 Extended you can animate Opacity, Position, Style and Text Warp but not scale/size.
The only way I can see to do it is frame by frame animation using layer visibility and different size text on each layer.
not fun!
DLS

How can i change alert text size?

hello everyone
how can i change alert text size?
thanks

What about using the properties of the alert, there are several settings for the font (also one for the size)

How do I save changes to a PDF with AxAcroPDFLib.AxAcroPDF?

I am using C# and have created a regular Windows form. I have used COM and registered AxAcroPDFLib.AxAcroPDF. Here is my code;
axAcroPDF1.LoadFile("myfile.pdf")
axAcroPDF1.Show();
MessageBox.Show("Showing...");
This works fine. But, just like the browser, I cannot save changes to the PDF. I have the full version of Adobe Acrobat installed, Standard 8.0. I also have the Pro. version 7.1.0 on another PC. When I click save I just get prompted to save it locally, just like I was in the browser.
If I edit these normally, just via Adobe Acrobat Standard, I can save my changes. I cannot do it via the AxAcroPDFLib library.
How do I save changes to my adobe acrobat pdf file in my program? Thank you for any help. please.

I did this after I wrote this. I have looked at the documentation but I can't find what I am looking for. Is there another way to open a file for viewing that has the full capabilities or using the normal program...one that uses something besides AxAcroPDFLib.AxAcroPDF. The sample that did have a view used AxAcroPDFLib.AxAcroPDF so it wasn't helpful. All I need is normal program functionality of adobe standard or profession within the application. The users have a full version installed on their PC.
Thanks again.

How do I programatically change the text in a listbox that is contained in a cluster?

How do I programatically change the text in a listbox that is contained in a cluster?

In the front panel, right click on the listbox object and select create>attribute node.
In the diagram click on the attribute node and select "Item Names".
Connect the desired array of string to the attribute node.
BigBen

How do I save changes to about:config?

I change the keyword url in about:config but don't know how to save this change. If just close the tab or the browser, the old settings reappear.
How do I save changes to about:config?

Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode
See also:
*http://kb.mozillazine.org/Preferences_not_saved
*https://support.mozilla.com/kb/Preferences+are+not+saved

TS3276 how do I save changes in mail accounts preferences?

how do I save changes in mail accounts preferences? I add and delete mail accounts but when I close and then reopen mail, my changes are not saved, despite messages within the mail window saying that my changes are saved.

You can use an add-on to set the zoom level for all sites. For example, [https://addons.mozilla.org/en-US/firefox/addon/nosquint/ NoSquint] and [https://addons.mozilla.org/en-US/firefox/addon/default-fullzoom-level/ Default FullZoom Level].

How do you save changes made in iPhoto, and export the changed file. It keeps reverting back to the original.

How do you save changes made in iPhote, and export the changed picture file? When I select export, current format, it reverts to the original, wiping out all my work.

Try trash the com.apple.iPhoto.plist file from the HD/Users/ Your Name / library / preferences folder.
(On 10.7 or later: Hold the option (or alt) key while clicking on the Go menu in Finder to access the User Library)
(Remember you'll need to reset your User options afterwards. These include minor settings like the window colour and so on. Note: If you've moved your library you'll need to point iPhoto at it again.)
What's the plist file?
For new users: Every application on your Mac has an accompanying plist file. It records certain User choices. For instance, in your favourite Word Processor it remembers your choice of Default Font, on your Web Browser is remembers things like your choice of Home Page. It even recalls what windows you had open last if your app allows you to pick up from where you left off last. The iPhoto plist file remembers things like the location of the Library, your choice of background colour, whether you are running a Referenced or Managed Library, what preferences you have for autosplitting events and so on. Trashing the plist file forces the app to generate a new one on the next launch, and this restores things to the Factory Defaults. Hence, if you've changed any of these things you'll need to reset them. If you haven't, then no bother. Trashing the plist file is Mac troubleshooting 101.

Cmd brings up dashboard, can I change it? I used to use it to change the text size in Pages

Upgraded to lion and all is good. However, cmd+ has been hyjacked by the OS to bring up the dashboard. I use cmd+ and cmd- to change the text size in Pages. Is there a way to change the Lion keyboard shortcuts to get the functionality back for Pages? The cmd- still works to reduce text size in Pages, so it's even more frustrating that cmd+ does something else.
thanks in advance

Well on my MBP running Lion 10.7.2 Command+ or - does not do anything, and that is using either Command+ or Command(+ shift)+. I do not have pages installed.
The point is that Command+ and Command- should control the text size in Pages (we're not talking about any othr program, just Pages). Those are hard-set (programmed in the software) keyboard commands for Pages.
In Pages, Command+ should increase the text size, and not bring up the Dashboard. And that is the OP's problem - that command is bringing up Dashboard, which it should not do. Apparently there is some setting somewhere that is causing Command+ to do the wrong thing - and that's what we're trying to find.
So at least on my MBP Command+ certainly does not bring up the Dashboard....
Good - it's not supposed to, nor is that what the OP wants.
By the way, if you use Safari and/or Mail, you'll find that Command+ and Command- adjust the text size in those programs. Ditto Numbers, TextEdit, Bean, and many other programs - it's a fairly common assignment, hence not one which usually needs to be added via Keyboard Shortcuts.

Suddenly Firefox has changed the text size of my mail page...I am unable to read the text or mail, it is so small. what has happened and how can I rectify this?

When opening my Mail window, I found the text size was virtually unreadable. It has decreased. and I have no idea how to rectify this. This problem only started today-

See this: <br />
https://support.mozilla.com/en-US/kb/Page+Zoom

How can I make sure the text size on front panel will be adjusted by itself from PC to PC?

In my VIs under VI Properties -- Window Size, I checked the two boxes:
--Maintain proportions of window for different monitor resolutions
--Scale all objects on front panel as the window resizes
It seems that it worked for everything on front panel except the pure text wording that I put there for instruction purpose. The size of those text stuff didn't get changed proportionally after my application was built and run on different machines so some of them got cut off and looked messy.
Does anyone know how to fix this problem?
Thanks very much!

Hi Andrew,
Thank you for looking at my problem!
Both my development system and test system are Window XP. The font size are all set to Normal. What other details do you need to know?
The text on front panel shows well on my development machine. But when the .exe runs on my test machine, the text size was not adjusted by itself so the text body got cut off.
I found a way to "fix" this problem: I had to drag the text box down and right so there is enough magin between the text body and the box on the right and at the bottom. I had to try it a few times until it finally shows well on my test machine. However, with those magins, it doesn't look nice on my development machine anymore. Also, I only tried on one test machine, if it looks good on one test machine, will it look good on all the other machines? Eventually my app is going to run on Window 7. I'll have to test that out and find out if it's still going to be a problem. Anyway, I don't feel this is the right way to do it. I hope someone knows what I'm talking about and have a soluction to it.
Thanks very much!

Can I change default text size in CS5

Every new document seems to open with a default text size of 12 pt. (or 0.167 inches). I am a sign maker and my typical artboard size is often 120" x 120" or larger.
Is there a way to change the default text size so that new documents open with a text size of, say, 1 inch (or 3 inches, etc)?
Any help would be greatly appreciated.
thanks,
Duncan McLean

Open the New Document Profile that you use the most (from HD>Users><yourname>>Library>Application Support>Adobe>Adobe Illustrator CS5>en_US>New Document Profiles) or the equivalent path in Windows. Then go to Window>Type>Character Styles and double click on the [Normal Character Style] at the top of the list and modify the settings there to your liking. Save the document and restart AI.
Here's a view

How do I save changes to the document

How do I save the text changes

Hi Janie,
What sort of changes have you made? All changes made to the document are automatically saved once you close the document.
Shradha

Changing the text size in Pages or Open Office with Automator.

I have a question about the Automator software. I'm trying to change the size of the text in either Pages or Open Office. Present the text size is 10,5 and I would like to change this to 22. I wanted to ask whether this is possible and how I do this. This programme is very new to me. I have a German system and need to change hundreds of files. Many thanks.

Whilst in the Preview application, press "Shift - Command - A" (⇧⌘A) simultaneously to show the markup toolbar, or click View, and select "show markup toolbar". There is an icon "A" near the right hand side of the now visible markup toolbar, click this icon to reveal all the font options.

How do you can change the page size of a pdf in MAC? I have multiple pdf documents of different sizes that I want to combine.

Help. How do I change the page size of a pdf in MAC? I have multiple pdf documents in varying sizes I would like to combine and print.

There's no real need to do that. A PDF can have pages of different sizes.
On Fri, Jun 6, 2014 at 4:11 AM, christine rambo <[email protected]>

How do I save changes in text size

Similar Messages

Maybe you are looking for