How do I save changes to Transitions?

I have searched the Forum, but can not find the answer.
If I change a setting in Transitions (e.g. change the font in text scrolling) how do I make that change permanent, so that when I use that same Transition again, the 'new' font is used?
Thanks for the help.

Sorry about my poor description.
Are there any text tool plugins anyone could recommend that do save any changes you make?
Thank you for answering so promptly.

Similar Messages

How do I save changes to a PDF with AxAcroPDFLib.AxAcroPDF?

I am using C# and have created a regular Windows form. I have used COM and registered AxAcroPDFLib.AxAcroPDF. Here is my code;
axAcroPDF1.LoadFile("myfile.pdf")
axAcroPDF1.Show();
MessageBox.Show("Showing...");
This works fine. But, just like the browser, I cannot save changes to the PDF. I have the full version of Adobe Acrobat installed, Standard 8.0. I also have the Pro. version 7.1.0 on another PC. When I click save I just get prompted to save it locally, just like I was in the browser.
If I edit these normally, just via Adobe Acrobat Standard, I can save my changes. I cannot do it via the AxAcroPDFLib library.
How do I save changes to my adobe acrobat pdf file in my program? Thank you for any help. please.

I did this after I wrote this. I have looked at the documentation but I can't find what I am looking for. Is there another way to open a file for viewing that has the full capabilities or using the normal program...one that uses something besides AxAcroPDFLib.AxAcroPDF. The sample that did have a view used AxAcroPDFLib.AxAcroPDF so it wasn't helpful. All I need is normal program functionality of adobe standard or profession within the application. The users have a full version installed on their PC.
Thanks again.

How do I save changes to about:config?

I change the keyword url in about:config but don't know how to save this change. If just close the tab or the browser, the old settings reappear.
How do I save changes to about:config?

Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode
See also:
*http://kb.mozillazine.org/Preferences_not_saved
*https://support.mozilla.com/kb/Preferences+are+not+saved

TS3276 how do I save changes in mail accounts preferences?

how do I save changes in mail accounts preferences? I add and delete mail accounts but when I close and then reopen mail, my changes are not saved, despite messages within the mail window saying that my changes are saved.

You can use an add-on to set the zoom level for all sites. For example, [https://addons.mozilla.org/en-US/firefox/addon/nosquint/ NoSquint] and [https://addons.mozilla.org/en-US/firefox/addon/default-fullzoom-level/ Default FullZoom Level].

How do you save changes made in iPhoto, and export the changed file. It keeps reverting back to the original.

How do you save changes made in iPhote, and export the changed picture file? When I select export, current format, it reverts to the original, wiping out all my work.

Try trash the com.apple.iPhoto.plist file from the HD/Users/ Your Name / library / preferences folder.
(On 10.7 or later: Hold the option (or alt) key while clicking on the Go menu in Finder to access the User Library)
(Remember you'll need to reset your User options afterwards. These include minor settings like the window colour and so on. Note: If you've moved your library you'll need to point iPhoto at it again.)
What's the plist file?
For new users: Every application on your Mac has an accompanying plist file. It records certain User choices. For instance, in your favourite Word Processor it remembers your choice of Default Font, on your Web Browser is remembers things like your choice of Home Page. It even recalls what windows you had open last if your app allows you to pick up from where you left off last. The iPhoto plist file remembers things like the location of the Library, your choice of background colour, whether you are running a Referenced or Managed Library, what preferences you have for autosplitting events and so on. Trashing the plist file forces the app to generate a new one on the next launch, and this restores things to the Factory Defaults. Hence, if you've changed any of these things you'll need to reset them. If you haven't, then no bother. Trashing the plist file is Mac troubleshooting 101.

Premiere Element 9, how do you save your favorite transitions and 1080/60p

In Premiere Element 9, how do you save your favorite "transitions" and or "effects" to a folder like all the Premiere Element versions, theres no right clicking.
Does anyone know if the Panasonic HDC-tm700 1080/60p would work in version 9 ?

As you can see from this discussion from Muvipix.com, that camcorder does have some challenges.
http://muvipix.com/phpBB3/viewtopic.php?f=89&t=8453
In 60p mode, it uses a proprietary system that most third-party editors, including Premiere Elements, have problems with.
Using the software that came with the camcorder to convert it to 60i seems to make it compatible.
I'm not sure why Panasonic decided to make its video format non-standard. But it looks like the easiest solution is to edit that 60p video pretty much only with the software they give you with the camcorder.

How do I save changes in text size

How do I save increases in text size. The zoom feature reverts to earlier setting when I change web page. I was not able to change font size using font setting under content tab in tools.

You can use an add-on to set the zoom level for all sites. For example, [https://addons.mozilla.org/en-US/firefox/addon/nosquint/ NoSquint] and [https://addons.mozilla.org/en-US/firefox/addon/default-fullzoom-level/ Default FullZoom Level].

How do I save changes to the document

How do I save the text changes

Hi Janie,
What sort of changes have you made? All changes made to the document are automatically saved once you close the document.
Shradha

How do I save changes to "Energy Saver" that stay in effect after rebooting.

I have changed the sleep settings for the hard disk and display for my iMac but after I shut down and the start up again, the settings are back to the default settings. How can I save these changes and avoid having to do this change every time I boot up?
Tim

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, or by a peripheral device.
Set the Energy Saver preferences the way you want them.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including sound output andWi-Fi on certain iMacs. The next normal boot may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin. Check the settings while in safe mode. Have they been reverted? If so, set them again. After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test.

How do I save changes made to games? Example...Mafia Wars on FaceBook...Thank's

Trying to change stats on Mafia Wars game for FaceBook. It allows the change and then it goes away when I try to play. How do I make them permanent? Thank's
== This happened ==
A few times a week
== today

I afraid you cannot save these changes with the F12 developer tool. You could copy these changes to an external editor.
Note The Changes tab will clear if you close the F12 developer tools, but the changes you made with
DOM Explorer persist until you refresh the webpage.
More information about F12 developer tools, please refer to here:
Using the F12 developer tools
DOM explore
https://msdn.microsoft.com/en-us/library/ie/dn255008(v=vs.85).aspx#editing_an_element
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

How do I save changes to album info in "Get Info?"

I know this has been asked before, but I haven't found any answers related to recent versions of iTunes.
Running latest version on Windows 7. When I make changes to fields in the "Get Info" screen on an album, the changes don't save -- when I go to "Get Info" again, they are gone.
Any hints on how to solve this?
Thanks.

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, or by a peripheral device.
Set the Energy Saver preferences the way you want them.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including sound output andWi-Fi on certain iMacs. The next normal boot may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin. Check the settings while in safe mode. Have they been reverted? If so, set them again. After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test.

Just downloaded LR3 trial - how do I save changes after editing?

Can't see any ref to it.
Thanks, ot

clvrmnky wrote:
areohbee wrote:
I lock my photos after editing is complete ...
The beauty of non-destructive editing and snapshots (and, now, publish services) is that, just like negatives of old, your editing never has to be "complete."
When I say "complete", I dont mean "finished forever", I mean "finished for now".
I dont know how I do it, but sometimes I end up with AutoSync turned on by accident - last time it happened I hadnt even used AutoSync recently, it turned on by itself, upon restart after a crash I think. Even if my analysis is wrong and its entirely due to operator error - the result is the same: massive inadvertent edits until I detect the condition.
Also, I make another mistake sometimes (I think its me): when fast typing, I end up normalizing exposure across a whole sh-load of photos... - still havent figured out how I do that since I dont even see a shortcut for that. Sometimes I catch it right away, sometimes not until much later.
Another frequent mistake made by newbies a lot and seasoned users upon occasion: forgetting when edits will target multiple photos vs. just one.
I could go on and on... - I love that I can tweak edit settings on a whim, non-destructively, but I dont love it when changes are made inadvertently. Locking does not keep you from editing, just reminds you that it had previously been considered "finished for now" - you can proceed to edit if you wish, or revert to locked state after viewing a detalied list of changes. "Save Metadata" has now become obsolete for me, replaced by "Snapshot & Lock". I dont know about you, but my workflow is:
- After import, spend a good while editing, until done for now (at which point I snapshot & lock), then optionally at some point in the future:
- Revisit for re-editing until done for now... If thats just one change: say Exposure +.1, and it was intended, I confirm intention then move on. If I plan to make a few more changes, I unlock until I'm done with it, then relock).
To each their own, but ChangeManager has become my all-time favorite plugin. - Gives me a very warm and fuzzy feeling knowing that my photos will never be changed inadvertently - only intended changes... - I hope Adobe builds this into Lightroom proper in Lr4, but even if they dont, I'm covered. I never realized how much stress it was trying to be ultra-careful all of the time when using Lightroom, to not make inadvertent changes, until that stress was gone...

How to hide save changes alert window when no changes made to the form

hi,
in my form when i close the form without making any changes it displays do you want to save the changes alert.how to hide this alert when no changes are made to the form window.
regards
Yesukannan

Be advised that this solution will also exit the form without saving the changes and asking anything if the user did make changes.
You're probably changing some field from a PL/SQL trigger (hint: post-query or when-new-record-instance are likely). If you set the value of a field from a trigger or program unit that also marks the record as changed for Forms. Forms will then ask to save the changes when exiting the form.
If you want to prevent this, reset the record status after you change the field in the PL/SQL code.

How to make/save changes to the file - /etc/httpd/httpd.conf - in Terminal

I'm new to Unix/Terminal and am attempting to make changes in the Apache Web server's configuation file - /etc/httpd/httpd.conf - so that I can use PHP locally. (The "LoadModule php4" has a "#" mark in front of it which I am attempting to remove.) This approach is suggested in the book "Dreamweaver MX 2004 with asp, coldfusion, and php." The book includes instructions on how to adjust the files using pico in Terminal. But the book doesn't explain how to work with Unix/Terminal to enable the right access permission to save the changes in Terminal. I've been able to make the changes in pico the book recommends, but I'm not able to save the changes. I'm the only user of the computer.
Please advise how to be able to save the changes. Thank you!
G4 Mac OS X (10.3.9)
G4 Mac OS X (10.3.9)
G4 Mac OS X (10.3.9)

jamesk,
httpd.conf is owned by 'root'. therefore, to save your changes you need to use 'sudo' when editing the file. before you do that, you should type in
man sudo
and read about what sudo actually does. be aware that it can give you all-encompassing power to do many things - including messing things up.
once you have read about sudo, first do (substitute full paths, if necessary - e.g. /etc/httpd/httpd.conf for httpd.conf)
sudo cp httpd.conf httpd.conf.bak
to backup your httpd.conf file (in case you make an error), then do
sudo nano httpd.conf
to make your changes, then save the file.
then do
sudo apachectl configtest
to test changes to the server config (it should let you know if there is an error).
finally do
sudo apachectl graceful
to restart the server and re-read the config file.
cheers,
b

How can i save changes made to user accounts?

Hello everybody!
Well, this is my very first question to the community and i really hope you guys are able to help me!
Now my problem is as followed: On my MacBook Pro i use an Admin Account for personal usage, and then i got a Guest Account for everybody else than myself using my Mac.
A few days ago i spent almost an hour setting up my guest account in appearence and other general settings, i.E. the trackpad reaction or multi touch gestures. Afterwards, i logged out my guest account and shut off my mac. Then, another day afterwards i restarted my mac and checked, if those changes took effect. Now, surprisingly, the Guest User account was completely resettet and used something what looks to me like a standard setup.
How can i change this? How can i set up a Guest Account with certain rights, a specific wallpaper and only selected apps available?
Thank you for your help and have a nice day!

That is what the Guest User account is for - did you see this when you logged out of the Guest Account?
What you need to do is to set up a new account that is not the system installed Guest Account with a name of your choosing.
Regards.
Colin R.

How do I save changes to Transitions?

Similar Messages

Maybe you are looking for