How do i "save down" in photoshop cs2?

How do I save my Photoshop CS2 document in a lower version of Photoshop for a different user with older software?

Search Photoshop's built-in help files or post your question on Adobe discussion boards:
http://www.adobe.com/support/forums/

Similar Messages

  • How do I save down a version from adobe photoshop CC (2014) to version 6?

    How do I save down a version from adobe photoshop CC (2014) to version 6?

    You don't, you just save.
    PSD files are mostly backward compatible (back to Photoshop 3.0).

  • How do I save.cur in Photoshop CC?

    How do I save.cur in Photoshop CC?

    PS does not natively support windows icons and cursors. I'm not aware of any compatible plug-ins, but perhaps a web search can turn something up...
    Mylenium

  • How do i made Blurs in PhotoShop CS2?

    How do i make blurs in photoshop CS2?
    and if you can answer this, how do i make blurs in FinalCut Express 4?
    Thanks

    {quote}
    ermm i didnt really understanded that
    and yea i know it doesnt belong but i didnt know where to put it.
    There's no real place to put a question like this on this forum, especially in the iChat subgroup.
    Adobe Photoshop is a very powerful and complex graphics program with a hugh support system including the built-in help menus and online forums. There must be 200 books on the program and even more web sites with information and training for Photoshop. It is beyond the scope of this Apple Leopard user forum to teach you what you should be reading about.
    You can start here: http://www.adobeforums.com/webx/.ee6b362/
    You can also Google for: macintosh photoshop cs2 "blur tool"
    Meanwhile, are you having any issues with your Macintosh computer or the Leopard Operating system?
    Message was edited by: dechamp

  • How to renew my license for Photoshop cs2?

    I bought a Photoshop cs2 disk years ago and used to work with it without any problem.  However, now the dialog appears saying that I should apply for a new admission to use the license, and , moreover, that I may use a telephone channel.  Here, I finally got to a web site for a chat with you.  Could you help me how to activate my present license?

    Dear Trevor and John,
    Thank you for your kind advice. I have realized that cs2 is no longer
    supported.
    Since my old iBook G10 is also going to be out of date, I will replace it
    for a more recent type with appropriate new soft wares. Thank you again for
    you assistance.
    S.T.
    2013/12/1 John Waller <[email protected]>
        Re: How to renew my license for Photoshop cs2?
    created by John Waller <http://forums.adobe.com/people/John+Waller> in *Photoshop
    General Discussion* - View the full discussion<http://forums.adobe.com/message/5888623#5888623

  • How do I straighten images using Photoshop CS2?

    Can someone please tell me how I straighten images like horizons and buildings using Photoshop CS2?
    I run the software under Windows XP
    Thank you.

    What I do is press Ctrl-T which activates Free Transform. I press Ctrl-" which turns on the grid. I can then rotate the file to correct a drooping horizon, or I can Right-Click on the image to activate the contextual menu, and select Skew. In that mode, I can grab a corner and drag it up or down, right or left, to shift or tilt the image.
    Another way to level horizons is to use the Measure tool and from the menu, <Image>, <Rotate Canvas>, <Arbitrary>. You use the Measure tool to draw a line from one part of the horizon to another. When you click Arbitrary you'll get a little dialog. Click <OK> and the image rotates. You'll need to deal with cropping next since your image no longer fills the corners.

  • How can I select printers in Photoshop CS2?

    Hi all. First time poster, as I've just come across a new problem for me....
    For years I have been using Photoshop CS2 on a Windows XP machine (in a work environment where old hardware attached to the PC would not allow for an upgrade). I had 4 printers installed (desktop HP, brother labels, richo for bits and bobs and an Epson WFP 9700)
    I had the HP desktop selected as default, as this is the one I print to every day. From Word, PDF;s Outlook etc, everything goes to the HP.
    When I used Photoshop installed on XP I had an option form within Photoshop to select printer. (Print with preview / Page Setup / Select Printer)  I would often design some artwork and print in draft mode on the HP, then swap printer within CS2 and select the Epson to print a 44"  etc.
    I have today upgraded to a Win 7 PC (Xeon 5450 dual quad core) and used the very same installation package to reinstall CS2 on the new machine. There is no longer the option to choose printer from WITHIN Photoshop. I have to set the default printer from within windows before I can use it in CS2. This is incredibly annoying as I frequently swap between two printers from within the application.
    So...does anyone know how I can get that option back? Swapping from within windows is not a solution; this is in a work environment and needs to be accessible from Photoshop.
    Any ideas?
    Thanks, Andy

    Officially, Adobe no longer supports CS2 and doesn't recommend using it on newer operating systems since it pre-dates them all by several years.    Can you install CS2 in XP Compatibility Mode?  Even then, some features may not work right. It's too old.
    Nancy O.

  • How to import B & W from Photoshop CS2

    Hi, I'm new to this forum, so be gentle! <g>
    I'm trying to make a slideshow, mixing color and black-and-white images. All of these images are scanned, from prints or slides. The b&w images are then converted from 16-bit RGB to 8-bit grayscale, then edited in Photoshop CS2, then imported into iPhoto.
    (Just as a sidenote of possibly dubious relevance, the color images begin digital life as 16-bit, the grayscale as 8-bit.)
    These images look fine as 8-bit grayscale images in CS2, but when I import them into iPhoto, either in a batch, or individually, they show up as black rectangles. If I click on the rectangle, I see a negative of my image.
    This used to work ok, before I upgraded both to CS2 and iPhoto 6. How can I get this to work again?
    I have both a 15-inch G4 Powerbook, and a dual 2.7 GHz G5 PowerMac, running the current system and the same version of all software. The PB has 2 GB of RAM, the tower 3.5 GB.

    Hi! Thanx for your response.
    It is not clear that he has imported it as wmv or pdf, but the slideshow has to be imported in such a manner that it can still be edited (Captions, effects etc.)
    Creating a wmv or pdf will not allow the same.
    Any Ideas?

  • How can I save down from InDesign CS5 to Indesign CS2?

    Is it possible to save a file from cs5 to cs2?
    Thank you

    Yes, but only if you have CS4.  Be aware that it opens up a can of worms of potential problems but should be OK for less complex documents in one off cases.
    To do it export an idml from CS5, open in CS4 and export a inx file.  Then go here and follow the instructions, or just do the same thing in CS3 if you have that.

  • How do I save ico in Photoshop CC

    I have recently updated to Photoshop CC and can no longer save files to ico format. In CS6 I had a plugin from this website: http://www.telegraphics.com.au/sw/ but they don't have anything for CC listed yet. I tried to drag that plugin into the CC plugin folder and it didn't seem to change anything, restarted Photoshop and the machine as well.
    Does anyone know if there is a new plugin out there. I used google and couldn't find anything, maybe I'm searching for the wrong words. Any help on this would be appreciated, I need to make a little more than 300 icons this month for my companies product and don't want to have to install CS6 back on the machine.

    you can download the plug-ins called Telegraphics. I have Photoshop cc 2014 installed on windows 7 64 bit  so i download from the website Windows (64 bit)
    After you download the plug-ins ( in the archive is ICOFormat64 ) you have to copy to the file File Formats, in my case is C:\Program Files\Adobe\Adobe Photoshop CC 2014\Required\Plug-Ins\File Formats.
    Have fun !

  • How to batch "Save As" in Photoshop CS3

    My workflow includes picking photos from Bridge and opening them in Photoshop CS4 as Smart Object. I often have twenty or more photos open in Photoshop. Is there a way to batch "Save As" the photos (using the default name Photoshop gives them)? Otherwise I have to do each one one by one. Thanks!!

    Thank you for the help. When I choose "Use Open Images" under number 1, and under number 3 "Save as PSD" and then click "Run" I get a message that open files must be saved first. Suggestions? Am I supposed to load an "Save As" Action and pick that under number 4? I have tried that to no avail....it hangs up because after I save the first photo, the second opens and I get the "Save Changes" question. If I choose to save the changes, then I can't turn the Action recording off. If I don't save changes, it closes that file. Any suggestions? Thanks!!

  • Do I need to save down a Photoshop CC file for someone to open from CS4?

    I'm working from Creative Cloud version of Photoshop. Client is asking for files to be saved back to CS4 (mostly for InDesign, but I've done some jobs such as eblast in Photoshop). Is there a method, or will verison of Photoshop CS4 open CC PSD's?

    tj bean wrote:
    I'm working from Creative Cloud version of Photoshop. Client is asking for files to be saved back to CS4
    There is no option to save back to CS4.  If you are given them Jpeg files it should not natter.  I you are giving them layered files you should save PSDor PSB with Maximize PSD and PSB File Capability: set to Always in your Photoshop preferences.  You should also avoid using Photoshop features not in CS4 when processing images for them..  For example a shape layer with a stroke pathe using styled line like dots or dashes.  Should you use features not in CS4 a  layered  PSD or PSB with Maximize PSD and PSB File Capability may be usable in CS4.

  • How do I save an adobe photoshop cc file for photoshop touch and still retain the layers?

    I want to continue working on my .psd image in my wacom cintiq companion hybrid, but it only has touch and when I open the photoshop file there, the layers compress. What do I saw it as so this doesn't happen?

    I am not sure whether this is what you are looking for but:
    Cmd+Opt+Shift+E will add a composite (flattened) layer without affecting the layers that created it.

  • How do I re-activate old Photoshop CS2

    My computer crashed yesterday and having finally got it up and going again, but lost all my programs. I am slowly re-installing them and have found that even though I have installed my CS2 from my disc. it's only giving me 30 days to activate it. However, I can't seem to be able to. I click on the button to activate and it says   
    Now I bought this years ago and I know it's old, but so am I and I am happy with it.  I do hope someone can help me here.
    Thank you

    The CS2 activation servers are off-line permanently. See the page below:
    http://helpx.adobe.com/x-productkb/policy-pricing/creative-suite-2-activation-end-life.htm l
    Follow the instructions carefuly to download the new software file(s) from that page. Use the activation code from that page, not your old key, to activate the software.
    --OB

  • How can I save file in Photoshop with an transparent background as an eps

    I can save a file with a transparent background as an png and place it in a document and retain the transparent background. But my client requires eps file. Any suggestion would be appreciated.

    You could add a clipping path - look in the Paths panel menu.

Maybe you are looking for