How do I save just the video and audio I need for a project

I typically run 3-4 video cameras at an event that lasts 2 hours, but only want to keep about 30-60 min of the video. I don't always have the time to do more than a rough edit and am looking for a way to: 1 maintain the original quality , and 2 get rid of the excess. The rough cut would obviously take only i/4 to 1/2 the 84GB of space the raw video does.
What format can I export it to that will do this. My cameras all record in ACVHD and I dont see that as an option for export.

First I would find out what the pixel size of the frame is. Next export your photos to a folder on the Desktop using Custom size requirements and put in the maximum frame pixel dimension and a quality level of medium or less (depending on the quality of the frame). Give the folder a name like "DigitalFramePhoto" and copy that folder to the SD card. You'll need a card reader to do that.
The reason you need to put the folder into a folder is that the SD card is formatted for PCs and will only take a limited number of files at the root directory. Putting them into a folder and loading the folder gets around that limitation.

Similar Messages

I imported an hour of video into iMovie HD and cut it down to a 33 sec clip, and emptied the trash. When I save the project, the file size is 20Gb. How can I save just the 33 sec clip?

I imported an hour of video into iMovie HD and cut it down to a 33 sec clip, and emptied the trash. When I save the project, the file size is 20Gb. How can I save just the 33 sec clip?

Non-destructive editing is an important feature of iMovie HD 6.
iMovie preserves the entire copy of every clip you place into your movie in case you change your mind at a later stage.
So, if you have cut out one minute from a 45 minute clip, iMovie will have stored two complete copies of that clip. This is why is helps to set import as 3-5 minute clips rather than one huge chunk. As DV runs at 13GB per hour your project files can get very big.
One workaround is to complete the editing of a section of the movie, then export that to Quicktime: highlight the clip/s, choose Share-Quicktime, turn on Share selected clips only, and choose Full Quality from the pop-ip menu.
Once you have saved the stand-alone clip to your hard drive, you can re-import it into your project using the File/Import command, and delete the original long clip/s from the project.

How can i fix a clip when the video and audio are not matching up?

How can i fix a clip when the video and audio are not matching up? I imported the video from a junkdrive in a .VOB format and concerted to a .mov the videos were filmed on a miniDVD recorder.

I would try detaching the audio and the dragging the audio to the left or right until it lines up.

How do I move just the Video to the timeline in Premiere cs6, not the audio?

how do I move Just the Video to the timeline in Premiere, not the audio?

Hi there! I'd try posting this over in the official Premiere Pro forum: http://forums.adobe.com/community/premiere/premierepro_current?view=overview
The Premiere experts over there are more likely to help you out with your problem

Hello All... Back after a brief absence, things look a little bit different. I'm trying to take a 16 minute mini dv video and compress it for use on the web. I'm interested in any suggestions you may have on settings for the video and audio tracks. I'v

Hello All...
Back after a brief absence, things look a little bit different.
I'm trying to take a 16 minute mini dv video and compress it for use on the web. I'm interested in any suggestions you may have on settings for the video and audio tracks. I've tried using Sorenson 3 (15 frames, key frames set to automatic, 320 x 240) for video and IMA 4:1 (mono) for audio. The resulting video looked great but the file size came in at about 255 Mb.
Thanks!
PowerMac G5 1.8 Dual Mac OS X (10.4.3)
Message was edited by: Dan Foley

Thank you for the replies. Everyone was correct about the jack, interface, and phasing problems. I have been unplugging my motu audio interface and then using headphones at work. I have not changed any detailed audio output settings in logic. When I read that the jack might be a problem I tried switching headphones. This actually helped. I am using dre-beats headphones and they seem to be having issues with the mac/jack-(the phasing/panning problems. I can use these headphones with other devices but not the mac. I have to use ipod ear buds and the phasing seems fixed. Hopefully this information is helpful to someone else.
If anyone knows how to correct this issue please let me know its difficult to know what my final mixes are going to sound like and I have had to keep bouncing everything into i-tunes- sync to ipod and then listen in my car radio.

After years of owning all things Mac, I am finally trying to use iChat, and can't get it to work. I see my buddy, but all I can do is send a message--the video and audio chat icons are gray, as is inviting to a video chat under Buddies.

After years of owning all things Mac, I am finally trying to use iChat, and can't get it to work. I am using gmail, and I see my buddy (no camera icon next to her name), but all I can do is send a message--the video and audio chat icons are gray, as is inviting to a video chat under Buddies. My buddy has the same problem as I. We are able to do video chat through gmail, but I had hoped to use iChat. I am using OS 10.6.8, iChat v. 5.0.3. What am I missing?

HI,
iChat will Video chat to another iChat in a Jabber Buddy List (Google run a Jabber server for GoogleTalk)
However it will not Video to the Web Page login to iGoogle or the Web Mail Page login. (where people can Google Chat as it were in a Web Browser).
Nor does it video to the Google Talk Stand alone app for PCs or any other Jabber apps on any platform.
iChat uses a connection Process called SIP (Session Initiation Protocol) which is also used by other VoIP devices.
Jabber/XMPP invited the Jingle Protocol for Jabber Applications.
Google have included this in their Standalone app and the Plug-in for Web Browsers on both PCs and Mac (you can get this as a Standalone Plug-in or as part of Chrome)
More on this here This article has been changed several time in the recent months. It now claims a greater involvement by Google in writing the Jingle Library (Although now Google's version does not work with the others)
This tends to mean that using the web Login to Google to Chat also cannot video chat to other Jabber apps that are using Jingle.
If your Buddy is using iChat then check the Video Menu has two items to Enable Camera/Video chat and Microphone/Audio chats are ticked.
In the View Menu the Show Status Items should be ticked (Selecting them toggles the tick and the function On or Off)
It could be Internet speed but at this stage I would doubt this at this stage.
10:27 PM Saturday; January 21, 2012
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 iMac 2.5Ghz 5i 2011 (Lion 10.7.2)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
"Limit the Logs to the Bits above Binary Images."  No, Seriously

I am trying to edit a .mov video in Premiere Elements 12, but the video and audio do not sync. They work fine when played in Quicktime.

Hello,
I am trying to edit a .mov video in Premiere Elements 12, but the video and audio do not sync as soon as I load it into the program. It appears to work fine in Quicktime.
Thanks in advance.

mbgoodwi
Thanks for the reply. This is the plan.
Open Premiere Elements 12/12.1 to the Expert workspace.
In the Expert workspace, go to File Menu/New/Project and Change Settings.
In the Change Settings area, select the project preset
NTSC
AVCHD
AVCHD LITE 720p30
OK out of there. In the New Project dialog that appears, note that it has your new project preset named.
Be sure to put a check mark next to "Force Selected Project Setting on This Project". And, then OK out of there.
Back in the Premiere Elements 12 Expert workspace, use Add Media/Files and Folders to bring your video
into Project Assets. From Project Assets drag your video to the Timeline Video Track 1/Audio Track 1.
Is there an orange line over the content in the Timeline. See screenshot for orange line to which I am referring.
There should be no colored line over the content if the project preset matches the video properties. But, if you do see
that orange line, then render the Timeline content by pressing the Enter key of the computer main keyboard or press
the Render button above the Timeline.
Do your video/audio now play back in the Edit area monitor in sync?
Please let us know the result, and then we will decide what next.
Thanks.
ATR

Can we capture the video and audio using cam and microphone in Edge Animate?

Hi Everyone,
I got a new requirement from the client to create a HTML5 based functionality through which one can capture the video and audio using his web-cam/camcorder and microphone. I have researched on internet and found that there is api available (not reliable) http://www.html5rocks.com/en/tutorials/getusermedia/intro/ . I am not a coder by profession and use Edge animate to create HTML 5 based animations and stuff like that. Another problem which i have found that the api only works well with Chrome and Opera and not with Mozilla, IE..
Can anybody help me out in this, please...
Thanks & Warm Regards
Vikas

Hi, Vikas-
After a brief bit of research, you're definitely hitting upon the limitation of the browsers. Not all of the browsers have implemented this part of the HTML5 standard, so you're going to either have to use Flash or be limited to these specific browsers.
Thanks,
-Elaine

I am trying to use the auto audio-sync feature. When I select the video and audio clip to be synced FCPX says its syncing them and then once finished (at 100%) no compound clip is created and the video and audio file do not sync. Any help is appreciated.

I am trying to use the auto audio-sync feature. When I select the video and audio clip to be synced FCPX says its syncing them and then once finished (at 100%) no compound clip is created and the video and audio file do not sync. Any help is appreciated.

Hi
In iMovie'11 (version 9.0.x)
on top menu row - Apple/iMovie/File/Edit/Cut (Can vary dep. on language - in Swedish Apple/iMovie/Arkiv/Redigera/Klipp . . . )
down Cut menu - Slow playback/Raspid Playback/Re-play in Slow Motion and onvards
Here one can select the Pre-Set speeds
Are you familiar with getting 'inspector' to run?
No - but I guess that Double Click on clip/sequense or ctrl-Click on it might open it.
Yours Bengt W

I am trying to play an mp4 in quicktime and the video and audio does not sync. Any tips?

I am trying to play an mp4 in quicktime and the video and audio does not sync. Any tips? This is not hack/ripped video but a legit home movie.

In this case, it looks like Quicktime wasn't very efficient in managing memory, leading to a slowdown in playback. If QT has a lag and VLC doesn't, that's more evidence.
I couldn't say why your friend's windows computer plays the media fine, while your Mac doesn't. The only thing I could suggest is to disable QT streaming video - which has been known to slow down performance.

Is the drag and drop interaction available for responsive projects in Cp8?

I created a responsive course but the Drag and Drop button is not active. Is the drag and drop interaction available for responsive projects in Cp8?
Thanks

Not yet available for responsive projects.
On Jul 14, 2014 10:31 PM, "EWC_elearningDev" <[email protected]>

How can I save ONLY the bookmarks and extensions

I am about to do a clean reinstall of Firefox. I want to save ONLY the Bookmarks and Extensions and NOTHING ELSE from the Firefox Profile. How can I do this please?
Thank you,

Both answers combined to help solve the problem. It would be good if more than one answer can be selected as "Chosen Solutions", because this situation occurs often in forums.
Thank you to both of you!
Kind regards.

How can I save a YouTube video and watch it later while I'm offline?

I'm trying to save a YouTube video and watch it offline.

Another EASY way:
Ik the address bar, insert "SS" between http://www. and youtube........
So: http://www.youtube........ becomes
http://www.'''SS'''youtube..... (.......is the movie you want to see)
Click enter.
You'll see another website, where you can download in MP4 or other extentions, low, medium or high quality.
DONE! ☺☺☺

How do i delete sections of video and audio at the same time

hello, i made a video with sound and overlapping voiceover i want to know how do i delete a section of the video and the voice over without having to resynch everything again?

In Final Cut Pro X, this is easy. You drag to select all these clips. Then use the Blade Tool.
However, in iMovie, it is not as straightforward. You can edit the camcorder clip and its audio, but any music tracks, voiceover tracks, etc. will not be edited with it.
A workaround is to use the SHARE menu to SHARE/EXPORT TO QUICKTIME using Apple Intermediate Codec to retain as much quality as possible. Then import this new movie into an Event. New all the audio is married to the video and you can edit everything together.

I get silent audio after i separate the video and audio

I'm using vintage video that I downloaded from the Internet. in one project I separated the audio and video, ditched the audio, and exported, via share, the visual clips I need for my final video. in a new project, I imported the segments to place over the audio I created with music software. the segments have a silent audio, that is, it has a part that goes on the audio track, but it's silent. it covers my audio and I can't hear it. I don't know why this happens or how to avoid it. help!
Thanks,
Rosateresa

Rosateresa
What version of Premiere Elements are you using and on what computer operating system is it running? Are you working with sources that come with copyright? For now I will assume no copyright protection involved.
I understand what you are doing through the point that you get rid of the original audio of a video file that has audio linked to it.
And, further I understand that you bring just that export video portion into a new project which has your "audio ...created with music software".
But after that I need clarification.
1. I would expect that, in the new project, you import the video to Video 1 to relate to the music that is already on Audio 1 or the Soundtrack.
I lose you when you write
the segments have a silent audio, that is, it has a part that goes on the audio track, but it's silent. it covers my audio and I can't hear it.
2. I am wondering if you are really saying that when you export the video portion of your file, the export has a video and audio component (silent audio component)? If that is the case, in the export settings under the Advanced Button of the export preset selected, place a check mark only next to Export Video. Remove the check mark next to Export Audio.
See example below from Premiere Elements 12 Windows. On the left...Export Settings and the Export Video and Export Audio boxes for check mark as needed. In the example I have a check mark only next to "Export Video".
3. But you can do everything in the same project, I would think. Right click the video with its linked audio, select Delete Audio. And then import your music into
that same project.
ATR

How do I save just the video and audio I need for a project

Similar Messages

Maybe you are looking for