How do I save multiple versions of an image from CS5 to LR4?

After using "edit in" to take an image from LR3 to CS5, I would then save the edited image by "save as" then add -1 for an edited version, -2 for b&w, -3 for a funky edit, etc. (i.e. name-1 or name-2 would be typical file names) They would all save to lightroom. However, since I upgraded to LR4, I can't do that anymore or it doesn't save the image in LR. This has thrown my whole workflow out of whack - especially since I want to use the album module and need those versions of the images for the album.
Please help. I'm getting behind on work while I try to figure this out.
Thanks in advance
Jeanie

You won't be able to do that until you upgrade to Photoshop CS6 and ACR 7. As it is now, from LR4 to CS5, Lightroom has to do the rendering and that requires that LR4 save out a tiff first them open it into Photoshop. I'm also pretty sure this applies to CS5 even if you are using ACR 6.7.
When ACR 7 in CS6 comes out, Lightroom can use a scrit called Bridge talk to send the image from Lightroom 4 into ACR 7 and then into Photoshop. With this workflow, LR4 doesn't have to save the tiff before sending it to Photoshop CS6. From there you'll be able to do the multiple Save As and have LR4 know where those images are...

Similar Messages

How can I save multiple titles under the same DVD?

I use HandBrake to rip DVD's into iTunes. How can I save multiple titles under the same DVD? For instance, I have a Jimi Hendrix documentary that comes with special features, such as concert performances. I would like to have the main feature and the special features saved in my iTunes under the same title, perhaps as different 'tracks' (kind of like how different songs can be saved under the same album).
Is there a way for me to do this, or am I chasing phantoms?

*This response is for iPhoto 11 (v9). If you're using an earlier version, please post back and let us know. Troubleshooting steps are not the same for different versions. To find out which iPhoto you have: iPhoto Menu -> About iPhoto)*
Duplicate the photo first. (Photos -> Duplicate). This means that you will have multiple copies of the master as well as the edited version.
If you use versions like this often and wish to have only one master then you can do this with Aperture.
Regards
TD

How can I create multiple versions of a video within the same project?

OK...this is a probably a very basic question but I'm not sure how to word it clearly.
How can I create multiple versions of a video within the same project? What I mean is that I have a bout 50 minutes of video and I want to make two DVDs using different clips from this original 50 minutes of footage. It would be a real pain to have to re-import the video AGAIN for the second DVD. I suppose I could drop anything I don't want to burn to DVD back into the clips pane but that would wipe out all my transitions wouldn't it? I want to save each project in their “raw” form so I can burn additional DVDs later otherwise I would just do them one at a time and not care about one of them being destroyed.
Wow...that was a mess. Does anyone understand what the heck I’m asking? I hope so.

How can I create multiple versions of a video within the same project?
You can't. You make separate projects using the same or different clips, segments, transitions, titles, etc. You can even duplicate the first project and then modify/make the desired changes in the duplicated project. Each project can then be burned as a different DVD or as different titles on the same DVD if there is enough room.

How do I have multiple versions of the same .chm?

Our developers recently were required to make changes to an earlier version of our software (thank goodness for backups). So I'm having to revert to that earlier version, make changes, and create a revised .chm. HOWEVER, I already had completed the upcoming release's .chm and don't want to lose all of those changes. To make matters more complicated, I also have requests for changes to the Help for the future release.
So, how does everyone have multiple versions of the .chm on their system at the same time and keep them separate, yet compile the right files with the right version? I had thought I could just create a new folder with the files that changed for the various versions, but updating them in Word 2007 is not a pretty proposition. I'll then have to import them in and replace the "old" ones. There has to be an easier way! I'm sure other people do this on a regular basis, but this is the first time I've had to go back a version, maintain the next version, and start work on a yet-to-be-released version all at the same time.

It never ceases to amaze me how questions on the forum are like buses, none for an hour then three come along. Not your fault but this was asked just a couple of days ago.
When your developers issue a new version you need to save a copy of the source, we just zip it up. Then you carry on editing for the next version and zip that up and go again.
Then when a change is required to an older version, you dig it up, amend it and zip it again.
Not sure how it works with source control. The above is easier and reliable, assuming you manage it tightly.
See www.grainge.org for RoboHelp and Authoring tips

Solaris 11 IPS: How do you post multiple versions of the same package?

How do you post multiple versions of the same software package on a single IPS instance(port)? Oracle was able to do it here with versions 151 and 175 of S11:
http://pkg.oracle.com/solaris/release/
Unfortunately, based on my searches, no where in the documentation (http://www.oracle.com/technetwork/server-storage/solaris11/technologies/ips-323421.html) does it explain to the development community how this is done. The best I can do is create pkg repo instances on different ports to host each different software version.
We are trying to deploy an IPS repository for our drivers and utilities that our customers can link to and pull updates from. We have been able to post a software package to the repository using the command:
pkgsend publish -s http://localhost:1234 -d ./ Appv1.p5m
This posts the package on the IPS repository instance at port 1234 on the server. However, we would like to post multiple versions of the package on the server at the same URL. Why the same URL? So that our customers and end-users need only point to a single URL to pull down our software rather than having to add a new URL to the publisher list each time we have an update. We want at least 5 of the previous software versions to be available on the server. Posting each version of the application or driver on a different IPS instance on a different port will require customers to add multiple URLs to their publisher list and they also will not be able to initiate remote scans for updates.
Has anybody been able to do this? Is any documentation forthcoming?
Edited by: user13489824 on Jun 25, 2012 10:17 AM

dhduvall: Thanks for your response. Yes, one would think that as long as the version numbers are different, you should be able to accumulate multiple versions of a package in a repository. It looks like Oracle has done it in their S11 repository unfortunately, as far as I know, they have not shared the steps on how to do this. I would like to publish two versions of the same package. I.E. two different manifests with two different fmri.pkg version strings and two different binaries.
If I publish one package after another like this:
pkgsend publish -s http://localhost:1234 Appv1.p5m
pkgsend publish -s http://localhost:1234 Appv2.p5m
Then only the second package shows up in the repository, as if it over-wrote the first one.
Running pkgsend with two manifest, like this:
pkgsend publish -s http://localhost:1234 Appv1.p5m Appv2.p5m
Will cause pkgsend to combine the packages and manifests as if they were a single package... not what I am trying to do.
Both approaches are complete without errors but neither achieves what I am trying to do.
alan.pae: Thank you. Unfortunately, the link didn't really help. I've read Oracle's white papers and IPS developer guide so I'm familiar with the topics covered.
Lex: Yes, I know. I specified the versions in the pkg.fmri value string.

How can i create multiple versions of a photo in ios8?

I Often want to create different versions of the same photo....with different crops, contrast, etc and keep them. In iPhoto, that was done with the duplicate command, but there does not seem to be the same capability in ios8. Any ideas?

How can I create multiple versions of a video within the same project?
You can't. You make separate projects using the same or different clips, segments, transitions, titles, etc. You can even duplicate the first project and then modify/make the desired changes in the duplicated project. Each project can then be burned as a different DVD or as different titles on the same DVD if there is enough room.

How can I save multiple Iphones into Itunes?

How can I save multiple Iphones into Itunes as independent devises? In the way we have it now they are sinking into each other.

How to use multiple iPods, iPads, or iPhones with one computer

How can we save multiple IDocs as a single Flat file in R/3 system ?

Hi,
How can we save Multiple Idocs as a single Flat IDoc in R/3 (Not xmlized)
Kulwinder

Hi,
Check this link for Mutiple IDOCs into single File.
/people/pooja.pandey/blog/2005/07/27/idocs-multiple-types-collection-in-bpm
Regards,
phani
Reward points if Helpful:)

How do I save multiple songs as one file?

How do I save multiple songs as one file?

Mhoopes wrote:
How do I save multiple songs as one file?
There are two ways:
1. Put the individual song files into a folder, and then Zip the folder. This creates a single .zip file. (Note however, that a .zip file is not playable in a normal player: it is just a "holder" for the song files.)
2. Use an audio editor such as Audacity to concatenate the individual song files into a single song file. This creates a single file can be played in a normal player such as iTunes.
Technique #2 is the one normally used to create a continuous mix.

[Forum FAQ] Schedule multiple versions of System Image Backup in Windows 8.1

As we known that there is no UI for user to configure Image backup in Windows 8.1, this is a guide for your to schedule multiple versions of System Image Backup.
Step 1: Create a task to schedule an image backup with following command:
SCHTASKS /Create /SC WEEKLY /D MON /TN WeeklyFullBackup /RL HIGHEST /ST 13:00 /TR “wbAdmin Start Backup -backupTarget:F: -include:C: -allCritical -quiet”
Step 2: Schedule a robocopy to backup the saved image with BAT file:
Please create a new folder (in this example, the new folder is e:\test2) to save your multiple copies of image backup:
Write following batch file to copy backup and rename with backup date:
*****************BAT********************
@echo off
robocopy e:\test1\ e:\test2\ test.wim
ren e:\test2\test.wim test_%date:~10,4%%date:~7,2%%date:~4,2%_%time:~0,2%%time:~3,2%.wim
NOTE: e:\test2 is my location to save multiple copies of image backup; e:\test1 is the location I create the system image backup.
This BAT can also help to rename the copy of image backup with date and time like below:
3. Set up a basic task in Task schedule:
Note: please make sure the time you configured follows the time you set for image backup in Step 1.
Action -> Create basic task (Name you task) -> Trigger (Set how often this task should be run) -> Action (Start a program) -> Under Program/script, point to your bat file you create in Step 2.b -> Finish
At the end, you can know more about SCHTASKS and Robocopy via following links:
Robocopy
http://technet.microsoft.com/en-us/library/cc733145.aspx
Schtasks
http://technet.microsoft.com/en-us/library/cc725744.aspx
Welcome to your feedbacks.
Please click to vote if the post helps you. This can be beneficial to other community members reading the thread.

Hi,
Thanks for posting in Microsoft TechNet forums.
I will try to involve someone familiar with this topic to further look at this issue. There might be some time delay. Appreciate your patience.
Regards,
Kelvin Xu
TechNet Community Support

How do i delete multiple emails at one time from iphone Mail account with iphone 4s?

how do i delete multiple emails at one time from iphone Mail account with iphone 4s?

Better than that!
http://www.youtube.com/watch?v=fKa-KFjUIGE
Select a message, hold the move button, deselect the message while still holding the move button.
A new window appears allowing you to move all messages to the trash.
Bingo!

How do I process multiple files and turn them from raw to jpeg

How do I process multiple files and turn them from raw to jpeg. Ive tried and it seems to go through the files but doesnt seem to process them or store them in the selected folder

Yes that was the first thing I did. Then I used the process multiple files and selected a new folder to put them in and selected use open files and selected to turn them into jpeg. The images flash on the screen like they are being processed, but the folder never appears in library. Is it possible because there are a couple 16 bit files open that this corrupts the task. Do I need to create the folder first. Will elements not create the folder on its own.
Thanks Vince

How can I save a region of an image into another image?

How can I save a region of an image into another image? Should I use JAI?
Java2d? Is there an example?
Thank you.

Here is what I try, but I find out I just get a black square for my output image, can you please tell me what am I missing?
          ImageIcon file=new ImageIcon("images/clouds.jpg"); // You can't open bmp files
               // width, height looks correct:
               System.out.println (" width" + file.getIconWidth());
               System.out.println (" height" + file.getIconHeight());
               BufferedImage bi = new BufferedImage(file.getIconWidth(), file.getIconHeight(),
               BufferedImage.TYPE_INT_RGB);
               int x = 0;
               int y = 0;
               BufferedImage subimage = bi.getSubimage(x, y, 40, 40);
               File outputFile = new File("newimage.png");
               ImageIO.write(subimage, "png", outputFile);

How do i save a picture on my,iPad from an email that was sent to me

How do I save a picture on my iPad from an email that was sent to me

Dsrock wrote:
I Opened the pic in chrome. It then gave me the option to save but It just saved it. Did not ask me where I wanted to save it
If it could save it then it went to the Camera Roll in Photos.

How can I save an EXE front panel image to a file?

The methods to save a VI front panel image to a file don't work on executable applications. How can I save an EXE front panel image to a file? (LabVIEW 6.1)

Hi,
i wrote some vi that save FP to image and created exe and it works fine. How do you save FP to image in VI?
If you use VI server method "Get Panel Image" and use "Write JPG file" ( or BPM) it works fine.
Attachments:
fp.zip ‏40 KB

How do I save multiple versions of an image from CS5 to LR4?

Similar Messages

Maybe you are looking for