How do I scan a document into my computer? The instruction book does not go into detail

HP deskjet 2540 All-in-one
How do I scan a document into my computer? The instruction book does not go into detail
Window 7
Thanks for helping me

Hi @thea14,
Welcome to the HP Forums!
I noticed that you are wondering how to scan with your HP Deskjet 2540 on Windows 7, and I am happy to help!
Please take a look through this how to scan guide, Scan from Windows 7 With the Full Feature HP Software for HP Multifunction Printers.
Hope this guide answers your questions, and thank you for posting!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping!

Similar Messages

The work book does not exist in the document store

Hi Forum,
Has anyone come accross this error "The work book does not exist in the document store" I just changed the description of my Work book in Development and saved. Now it wont open. The error message is "The work book does not exist in the document store". I already have this work book in Q. So I cannot create another one with a different tech. name. Someone please help

Youcan no longer display a workbook. You receive an error message when opening: <Internal error>: 1201 document storage
Cause and prerequisites
In very rare cases, when you store a workbook, you might not be able to open it again.
Solution
Function module BDS_PHIOS_GET_RIGHT has to be changed so that the last available version of the Workbooks can be displayed.

SharePoint 2010 list view - How to filter on a multiline text box field - the view filter does not allow me to select it.

Hi there,
Does someone know in SharePoint 2010 list view - How to filter on a multiline text box field - the view filter does not allow me to select it.
Thanks,

Hi，
Per my knowledge,
it is by design that the data type multiple lines of text can only use “contains” and “begins with” operators.
You can also filter the list view using SharePoint Designer,
Open your list AllItem.aspx page in SPD ->click “Filter” > in “Field Name” select your multipe line of text field, in “Comparison” will displayed four choices.
Best Regards，
Lisa Chen
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

When i try to email photos the collage tempalte does not come into email

when i try to email photos the collage template does not come into the email

In the iPhoto preferences accounts tab delete the account that is not working and re-enter it
Or better yet IMHO set apple mail as your email client
LN

When i plug my iphone in to my desktop computer, the iphone icon does NOT appear.....how do i get it to appear so i can synch my stuff?

When I plug my iphone 5s into my desktop computer, the iphone icon which you click on to to wnable you to synch your device with itunes does not appear. Its like being signed into itunes without a device connected.
If you look in the top left hand corner, this is where the icon should appear apparently, but as you can see, on my account it just isnt appearing! my usb cable is new from an Apple store and isnt faulty. The desktop computer is also new.

What happens if you go to iTunes > File > Devices, do you get the option to Sync iPhone?
You could try a reinstall of iTunes. OS X Yosemite: Reinstall apps that came with your Mac

How do i copy a single folder in the bookmarks to another computer. the master backup does not have access to individual folders. in windows you can just copy a specific bookmark folder without overwriting the whole thing

eg:
bookmarks
fav1
fav2
fav3
just want to copy fav2 to another computer

Unfortunately you can not do that it has been asked like forever and always gets pushed aside. You will have to export your bookmarks and strip out what you do not want being careful to maintain the integrity of the exported bookmarks backup file. Then import the bookmarks. into Firefox. The imported bookmarks will get added to a folder at the end of your "Bookmarks Menu" bookmarks folder. Move them to where you want them and then delete the folder you added to the "Bookmarks Menu". If you automatically sort your bookmarks (automatic sorting is a bad idea), be sure to turn it off beforehand.

HOW DO I SCAN A DOCUMENT TO MY COMPUTER USING MP210?

HOW DO I SEND A SCAN TO MY COMPUTER?

Actually, something was wrong with my computer that day and I couldn't find theprinter manual. But suddenly, It worked properly. When I scanned the photos, no windows were popping up to send them to a file and I didn't remember what to do or how to do it. I think I finally shut my pc down, and when I re-booted, the window to send the scan to a file popped up. So the problem resolved itself. Thanks for your input.

How do I turn my nano off when holding the pause button does not work?

my nano won't turn off or take a charge.....Help.

You know, one good way of putting people off helping you is to post multiple threads with your one problem in it. It's very silly and very tedious.
Have you checked the thousands of other threads that have discussed this same problem? That would probably be a better use of your time than what you are doing now.

Does anyone know how to join tracks when importing a symphony? The new iTunes does not do it for me

supposedly therer is a "NO" to check on mounting an audio CD. There is none
supposedly there is a "Combine tracks" choice in the right hand corner of iTunes. There is none.
Any suggestions? (I only do classical music and try always to combine movements of symphonies and concertos etc.)

See this discussion...
https://discussions.apple.com/message/20680548#20680548

When I plug in my iPhone 4S into my computer the iTunes program doesn't open. Only the Music iTunes opens

I have not synced my iPhone for some months. When I plugged it into my computer the iTunes program does not launch. There is an iTunes icon installed but this only opens as a Music/video program. There is no side panel where I select my device, account, apps, etc. I have tried re-installing iTunes but there is no difference. AutoPlay opens when I plug in the iPhone offering file, picture etc sharing but nothing elso opens.

Hi jonboy12355887,
Welcome to the Apple Support Communities!
If your iPhone is not showing in iTunes when connected to your Windows computer, please follow the steps listed in the attached article. I know situations like this can be very frustrating, but the information provided in this article should help you resolve the situation.
iOS: Device not recognized in iTunes for Windows
Have a great day,
Joe

X102e - Hard drive does not boot into Windows

Hi, I was trying to reinstall Windows on my X120e.
I tried clean install with Windows 7 Professional, but the hard drive does not boot into the Windows once it has done the first phase of the install(you know, the copying part)
After the restart done by Windows, it goes as far as "Starting Windows" but does not actually boot into the Windows.
When I try to install Windows with another HDD, the device works well, but I can't swap the HDD because it is not 7.5mm think HDD.
Is there any possibility the HDD will work trough any software-level process? The HDD works fine as external HDD when tested with external HDD adapter, and installs well. only problem is that it fails to boot
Kim
W540( ), Helix(Sold), Tablet 2(Sold) Tablet 2( ), X120e(Sold), X201 Tablet, X41 Tablet(Sold), X41, X32*4, 701C*4

Thank you for reply.
This is not exactly the issue. I was talking about the HDD originally installed in the PC.
The PC successfully recognizes the external disk I used to install the Windows, but the problem was that I did not boot into the "First boot" screen, which basically works on the already installed data.
As of now I have installed an SSD and is working fine. strange part is that HDD works just fine when I use it as an external HDD via adapter. Strange huh?
Kim
W540( ), Helix(Sold), Tablet 2(Sold) Tablet 2( ), X120e(Sold), X201 Tablet, X41 Tablet(Sold), X41, X32*4, 701C*4

HP Officejet 6500A How do I scan a document with multiple pages into one file?

HP Officejet 6500A Plus e-All-in-One Printer - E710n
Windows 7 (64 bit)
How do I scan a document with multiple pages into one file? My old printer (psc 2110) asked after each scan if I wanted to scan another page. At the end I had one pdf file with multiple pages.
This new one creates one file for each page and I cannot find a way to create one pdf file with multiple pages.
This question was solved.
View Solution.

Hi mpw101,
If you load the papers into the ADF - Automatic Document Feeder, and then select Document to PDF then they will all be scanning into one file. Let me know if this works for you?
I am an HP employee.
Say Thanks by clicking the Kudos Star in the post that helped you.
Please mark the post that solves your problem as "Accepted Solution"

How do I scan a document from HP MFP127fn to my Ipad Air2 (both are connected to my home network)

Hi, How do I scan a document from HP MFP127fn to my Ipad Air2? Both are connected to my home network - the HP printer is connected by ethernet cable, and the Ipad Air2 connected by WiFi. I can print from the Ipad to the Printer, but can't scan. The printer is connected correctly (ie, it scans to another lap-top (windows 7) without problems

hplover14
Welcome to the HP Community Forum.
You can Scan to Document (PDF) > combine the pages into one PDF file
Scan_Multiple_Documents-Combine
Your printer's Support Pages - you may need to use this cached link to reach the driver page:
HP Officejet Pro 8620 e-All-in-One Printer
Click the Kudos Thumbs-Up to say Thank You!
And...Click Accept as Solution when my Answer provides a Fix or Workaround!
I am pleased to provide assistance on behalf of HP. I do not work for HP.
Kind Regards,
Dragon-Fur

How do I scan multiple documents to a single pdf from the ADF on my MX922?

How do I scan multiple documents to a single pdf from the ADF on my MX922?
Solved!
Go to Solution.

Hi Riceburner1,
Since you have had difficulty scanning using My Image Garden, you can scan using the IJ Scan Utility program that also comes with the printer. To do this, please follow these steps:
1. Place the documents in the ADF or on the platen glass of the printer.
2. Start the IJ Scan Utility.
For Windows 8.1:
1. On your keyboard, press the Windows key.
2. Start typing IJ SCAN UTILITY. The search window opens as you type. Once the IJ SCAN UTILITY is displayed, please select and open it, then continue with Step 3 below.
For Windows XP:
1. Go to your START MENU, then select ALL PROGRAMS, then CANON UTILITIES, then the IJ SCAN UTILITY program.
2. In the Canon IJ Scan Utility window that opens, click SETTINGS.... in the bottom right of the window. The Settings dialog box appears. Please continue with Step 3 below.
3. In the Canon IJ Scan Utility window that opens, click SETTINGS.... in the bottom right of the window. The Settings dialog box appears.
4. Click the DOCUMENT SCAN option on the left pane of the window. In the Select Source field of the Scan Options section, select DOCUMENT (ADF/PLATEN) to scan items placed directly on the platen glass, DOCUMENT (ADF SIMPLEX) to perform single-sided scanning from the ADF, or DOCUMENT (ADF DUPLEX) to perform double-sided scanning using the ADF. You can then set the item size, resolution, etc. in the Scan Options section as desired.
5. In the SAVE SETTINGS section of the window, you will select the save format and location of the document you are about to scan.
a.) In the FILE NAME field, specify the name you would like to give the file. By default the filename will begin with IMG; you can remove IMG and change it to whatever you would like to name the file. Please note that the filename that you give the document here will be the default filename for all items scanned until you change the file name. If you leave the file name the same in the field, the scanned item will have a sequential number appended to the end of whatever name you give it.
b.) In the DATA FORMAT field, use the drop-down arrow to select the desired option. If you are scanning a multipage document, select the PDF (Multiple Pages) option.
c.) In the SAVE IN field, please navigate to the area where you would like the file to be saved once it is scanned in. By default, the file will be saved in the MY DOCUMENTS folder.
6. In the APPLICATION SETTINGS section of the window, please select the DO NOT START ANY APPLICATION option.
7. Once all settings have been selected, click the OK button at the bottom of the SETTINGS (DOCUMENT SCAN) window. The IJ Scan Utility main screen appears.
8. Click the DOCUMENT button. Scanning starts. Click the CANCEL button to cancel scanning if needed. Once the scan is completed, scanned images are saved in the previously selected folder location specified in the SETTINGS... window.
Hope this helps!
This didn't answer your question or issue? Please call or email us using one of the methods on the Contact Us page for further assistance.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

I don't have the option "Create from Scanner". How do I scan my documents?

I am trying to scan multiple documents (to save and email), but I don't have the option of "Create from Scanner" on the Adobe Reader XI. How do I scan my documents (multiple pages on one file, not each page on a seperate file)?

Nearly all word processors have the option to "insert" a picture or "aquire" an image so repeatedly accumulate your images in any document

How do I scan a document into my computer? The instruction book does not go into detail

Similar Messages

Maybe you are looking for