How do i scan a file and put it on the hp computer to be put in an email

I have anHP Envy 114 e-All-in-one printer D411c Windoe 7 64-bit No Error nothing else installed Can't get the printer to scan to computer

racinglady27, Sorry to learn that you are having this issue;
Try this article; Click here
Try this utility it may help find if you issues with the printer GO HERE,
Let me know the outcome I will do my best to assist you.
Hope this helps:
RobertoR
And Remember. . .
You can say THANKS by clicking the KUDOS STAR. If my suggestion resolves your issue Mark as a "SOLUTION" this way others can benefit Thanks in Advance!

Similar Messages

How do I convert AAC files and put them on my SD card

Hello all,
I'm trying to convert some of my itunes track unto my sd card and then play them with my zen. ? The problem is I can't figure out how to get zen media explorer to put the converted files on my sd card. Does anyone know how to overcome this problem? Any help and information is very much appreciated.

daemonvi wrote:
tapdiggity wrote:
Your instructions does not seem to address the issue of putting converted aac files onto the sd card.
Yes, they do. What they don't answer is "How do I configure <insert random media management application> to convert tracks between different audio formats and DIRECTLY store the converted output to the SD card I have installed in my Zen?
Why not? Because it isn't really possible. The internal memory of the Zen and the SD card contents are completely distinct storage areas and are not simultaneously visible to the host computer. You either have the Zen in MTP mode where you can interact with the internal memory or you have the Zen in Removable Disk mode where you can interact with the SD(HC) card. It is an either-or proposition. So you must (a) convert your music files to a location on your host computer, (b) put the Zen into Removable Disk mode, (c) transfer the converted files to the SD card and then (d) restore the Zen to MTP mode (where you can use the Memory Card menu items to browse/play the files).
I suppose I could pull back on the "not possible" part a bit since a stand-alone audio converter should allow you to set a user-specified output folder. As such you could put the Zen into Removable Disk mode first and then configure the converter to send files to the approriate folder on whatever dri've letter the SD card gets mapped to.
Message Edited by daemonvi on 05-8-2009 2:0 PM
I think I want to start with (a), now can I use Zen media explorer to convert the files and place in another location on my computer or I must I download a 3rd party application to do this?

How do I scan large black and white documents, creating the smallest file size possible?

I am attempting to scan a 70 page document and prefer it to be a file small enough to send through regular email. I am not interested in zipfiles, i am not familiar with them. I have been scanning and converting to .pdf for years, using the lowest dpi reasonable, but my file sizes are still quite large (compared to other .pdf's that are emailed to me). I know there is a way, just haven't figured it out.
Ed

hplover14
Welcome to the HP Community Forum.
You can Scan to Document (PDF) > combine the pages into one PDF file
Scan_Multiple_Documents-Combine
Your printer's Support Pages - you may need to use this cached link to reach the driver page:
HP Officejet Pro 8620 e-All-in-One Printer
Click the Kudos Thumbs-Up to say Thank You!
And...Click Accept as Solution when my Answer provides a Fix or Workaround!
I am pleased to provide assistance on behalf of HP. I do not work for HP.
Kind Regards,
Dragon-Fur

How do I upload a file and put on a website?

Trying to upload an image to a website that I saved on the ipad2, however, the upload option is greyed out. Is there a way around this?

I don't think that it's possible via a browser - have you checked the app store to see whether the website has got it's own app, or whether there is a third-party app for it ?

How do I load property files and images stored in the jar file?

Hi
So, if I have a structure like this:
/com.myfirm.myproject.SomeClass
/images/
/properties/
And I pack this structure into a jar file, how do I then access the images under "/images/" and the property files under "/properties/"? A link to a good tutorial on this would be perfect, or a description/hint/howto :)

Im having problems even loading direcly from the directory..? I have this structure:
src (source dir)
classes (classes dir)
lang/textRb_en_US.properties (the file I want to load)
Then I have this code:
Locale currentLocale = new Locale("en", "US");
ResourceBundle textRb = ResourceBundle.getBundle("/lang/textRb", currentLocale);But it gives me a "java.util.MissingResourceException: Can't find bundle for base name /lang/textRb, locale en_US". I start my application from within Eclipse, and I have tried to move "lang/textRb_en_US.properties" into the classes dir, but same error.
Im confused as to there Java looks for ressources, and I need this to work no matter where I put my classes/jar. Could you help me out here?

How do a scan a file from my scanner and make it a PDF. . . . I do not see this choice in the Adobe program?

How do a scan a file from my scanner and make it a PDF. . . . I do not see this choice in the Adobe program?
In the past I would simply place a copy of the document on my scanner, then selected create PDF from scanner. However, there is now no create PDF from scanner alternative, option or choice. The only option available is selected file to convert to PDF. what am I to do?

That would have been a function of your scanning software. Adobe Reader is only used to view the pdf that your scanning software created.

My mac book pro crashed and the logic board died. They said that i could get the hard drive out and it should have all my files on it. How do i get them off and put them on my new computer?

My mac book pro crashed and the logic board died. They said that i could get the hard drive out and it should have all my files on it. How do i get them off and put them on my new computer?

Mj
Do you mean a case for the external hard drive? See here. Hope this may be helpful to you.
Regards,
Joseph

How to make blank copies of a PDF file and put it into the printer tray.

Dear experts,
Before you try printing the data from the FM, How tomake several blank copies of the PDF file and put it in the printer tray so that you can print just the data from the function module on it??????
Please reply.

Hi drredwood,
When you open your PDF file a yellow bar will appear on the top of the screen.
Click on 'Enable All Features'.
Then you will be able to copy the content from your pdf and to paste in any of the file.
Regards,
Florence

How to make an openfiledialog? (browse a file and put it in a parameter)

How to make an openfiledialog? (browse a file and put it in a parameter)
Best Regards

hi,
check the code below:
FORM sub_gui_download.
* Define local variables
DATA:
    lo_fullpath       TYPE string,
    lo_filename       TYPE string,
    lo_path           TYPE string,
    lo_user_action    TYPE i,
    lo_encoding       TYPE abap_encoding.
* Define local constants
CONSTANTS:
    lc_encoding(1) TYPE c VALUE 'X',
    lc_directory TYPE string VALUE 'D:',
    lc_filetype TYPE char10 VALUE 'DAT',
    lc_separator TYPE char01 VALUE 'X',
    lc_blank TYPE char01 VALUE ''.
* Call method to create dynamic save_path and save_format
CALL METHOD cl_gui_frontend_services=>file_save_dialog
    EXPORTING
      with_encoding        = lc_encoding
      initial_directory    = lc_directory
    CHANGING
      filename             = lo_filename
      path                 = lo_path
      fullpath             = lo_fullpath
      user_action          = lo_user_action
      file_encoding        = lo_encoding
    EXCEPTIONS
      cntl_error           = 1
      error_no_gui         = 2
      not_supported_by_gui = 3
      OTHERS               = 4.
IF sy-subrc <> 0.
    EXIT.
ENDIF.
* Check user_action
IF lo_user_action <> cl_gui_frontend_services=>action_ok.
    EXIT.
ELSE.
*   If user_action equals to action_ok, call function module to download datas
*   using download table i_dwn_tab
    CALL FUNCTION 'GUI_DOWNLOAD'
      EXPORTING
        filename                = lo_fullpath
        filetype                = lc_filetype
        write_field_separator   = lc_separator
        trunc_trailing_blanks   = lc_blank
      TABLES
        data_tab                = i_dwn_tab
      EXCEPTIONS
        file_write_error        = 1
        no_batch                = 2
        gui_refuse_filetransfer = 3
        invalid_type            = 4
        no_authority            = 5
        unknown_error           = 6
        header_not_allowed      = 7
        separator_not_allowed   = 8
        filesize_not_allowed    = 9
        header_too_long         = 10
        dp_error_create         = 11
        dp_error_send           = 12
        dp_error_write          = 13
        unknown_dp_error        = 14
        access_denied           = 15
        dp_out_of_memory        = 16
        disk_full               = 17
        dp_timeout              = 18
        file_not_found          = 19
        dataprovider_exception = 20
        control_flush_error     = 21
        OTHERS                  = 22.
    IF sy-subrc <> 0.
      MESSAGE i007.
    ENDIF.
ENDIF.
ENDFORM.

How to retrive value from SVG and put in XLS(excel) file ?

Hello all,
I ll appreciate you if you help me in this issue,
My Project Manager give me a task of creating a java program to take values from SVG file and put that data into a particular cell.
Can you give me some favourable hints to help in this issue.
Thanks in advance.
Jaison

If by "array format" you mean comma-separated, why not
FOR x IN v_searchResult.FIRST .. v_searchResult.LAST
LOOP
v_id := v_id || TO_CHAR(v_searchResult(i).Product_ID);
END LOOP;or even better....
FOR x IN v_searchResult.FIRST .. v_searchResult.LAST
LOOP
    IF x = v_searchResult.FIRST
    THEN
       v_id TO_CHAR(v_searchResult(x).Product_ID);
    ELSE
       v_id := v_id ||','|| TO_CHAR(v_searchResult(x).Product_ID);
    END IF;
END LOOP;Cheers, APC

How do I process multiple files and turn them from raw to jpeg

How do I process multiple files and turn them from raw to jpeg. Ive tried and it seems to go through the files but doesnt seem to process them or store them in the selected folder

Yes that was the first thing I did. Then I used the process multiple files and selected a new folder to put them in and selected use open files and selected to turn them into jpeg. The images flash on the screen like they are being processed, but the folder never appears in library. Is it possible because there are a couple 16 bit files open that this corrupts the task. Do I need to create the folder first. Will elements not create the folder on its own.
Thanks Vince

Reading .txt files and put it into a TextArea

Hi all,
I got a problem! I have to make something like a messenger.
I want to put the written text into a .txt file, after that I have to get the text out of the .txt file and put in into a TextArea.
I would ike it to to that like this:
">User 1
Hello!
>User 2
Hi!
Now here are my questions:
1: What is the moet easy way to do this ?
2: How could i put Enters into a .txt file with Java ?
3: How could i read all the text from the .txt file and put it into a TextArea WITH ENTERS ?
Thanks for your help!
Greetings, Jasper Kouwenberg

use JTextArea.read(new FileReader(fileName)) for reading.
and JTextArea.write(new FileWriter(fileName)) for writing.
The enters should be ok if the user press enter and adds a new line ("\n") to the text area component.
It will save the enter in the text file and load it correctly back to the text area.
If you want to add enter programmatically just add "\n" string to the text area component.

Read from xls file and put it in a table

Hi,
I've an xls file while is having 8 cells with some thousands of rows. i've to write a procedure to read that file and put it in a table(each cell as each column). pls help me how to proceed. i'm using oracle 9i
Regards
Abdul Muthalef

as Gasparotto said, copy the csv file to the database server.
create a directory object on the database.
create directory dir_temp as 'e:\mydir'
grant read, write on directory dir_Temp to <user>
and then map this csv file to the external table using the below syntax.
CREATE TABLE tab_hierarchy
node_id          NUMBER,
parent_id     NUMBER,
description      VARCHAR2(255)
ORGANIZATIOn EXTERNAL
     TYPE ORACLE_LOADER
     DEFAULT DIRECTORY dir_temp
     ACCESS PARAMETERS
     records delimited by newline
     fields terminated by ','
     (node_id,parent_id,description)
     LOCATION ('tree.csv')
PARALLEL
REJECT LIMIT UNLIMITED;in the above code, replace the filename under the LOCATION with your csv file name.
now you should be just able to do select on this table and insert to the other main tbale.

How to read in a file and change the column attributes

Hi,
I'm new to java and i'm stuggling to find a way to read in a text file and perform calculations on the data, such as to normalise it.
What in want to do is normalise the data by finding the greatest value in a column and then divide all the other values in the column with that value.
I know how to read a file in and store each line in a vector but for this problem i think i need to store each column in an array, but i'm not sure how to do this.
Can anyone help please?
Thanks

Hi,
I'm new to java and i'm stuggling to find a way to
read in a text file and perform calculations on the
data, such as to normalise it.
What in want to do is normalise the data by finding
the greatest value in a column and then divide all
the other values in the column with that value.
I know how to read a file in and store each line in a
vector but for this problem i think i need to store
each column in an array, but i'm not sure how to do
this.
Can anyone help please?
ThanksI think this should work but I wrote it out without completely thinking about it (hopefully to get things started).
So if you had this:
age height earnings
0 2 100
1 3 50
2 1 0
For the age column you'd take 2 as the largest and then divide 0 and 1 by two to get 0, .5.
First build up test files that seperate the columns in different ways. With spaces, tabs, and the ASCI Control character for null ( I think it's 0 ). Your program should detect
numbers and spaces, tabs control character, commas and periods (for money). Because numbers don't have spaces it should be easy to keep track of which column
you're in.
Store each line into a 3D String array with each index containing a String built up from the chars scanned in on each line, when a blank area is found followed by another
number iterate the column index. When you come to the end of the line set column == 0 and row+1.
private String[][][] test = new String[2][6][1];
20     3      11      14      44       0
4      5       7      80      91      49
test[0][0][0] would be row 1 col 1 value 1 ((20))
test[0][1][0] would be r1, c2, v1 ((3))
test[1][0][0] would be r2, c1, v1 ((4))
test[1][2][0] would be r2, c3, v1 ((7))
test[1][5][0] would be r2, c6, v1 ((49))
package source.Final;
import javax.swing.*;
import java.io.*;
public class S7
     public static void main(String[] args)
          getContents();
          System.exit(0);
     public static void getContents()
          String lineSep = System.getProperty("line.separator");
          char c = ' ';
          int iterator = 0;
          int i = 0;
          int charNum = 1;
          int lineCount = 1;
         //declared here only to make visible to finally clause
         BufferedReader input = null;
         BufferedWriter out = null;
         try {
                     String line = null;
                      * This implementation reads / writes one line at a time
                      * using the buffered reader / writer Java classes.
                     input = new BufferedReader( new FileReader( "C:\\Scan file test\\Read\\test1.txt" ));
                       out = new BufferedWriter( new FileWriter( "C:\\Scan file test\\Read\\test2.txt" ));
                     //input = new BufferedReader( new FileReader( "C:\\Scan file test\\Read\\booked_policies1.txt" ));
                       //out = new BufferedWriter( new FileWriter( "C:\\Scan file test\\Write\\booked_policies1.txt" ));
                     //input = new BufferedReader( new FileReader( "C:\\Scan file test\\Read\\booked_policies2.txt" ));
                       //out = new BufferedWriter( new FileWriter( "C:\\Scan file test\\Write\\booked_policies2.txt" ));
                     //input = new BufferedReader( new FileReader( "C:\\Scan file test\\Read\\booked_policies3.txt" ));
                       //out = new BufferedWriter( new FileWriter( "C:\\Scan file test\\Write\\booked_policies3.txt" ));
                     out.write( "Character\tLine Number\tCharacter Number\tAscii Value" + lineSep );
                          while (( line = input.readLine()) != null)
                          i = 0;
                          charNum = 1;
                          iterator = 0;
                          while( i < line.length() )
                                           c = line.charAt(iterator);
                                        if( (int)c == 0 || (int)c == 9 )
                                             break;
                                        else if( c >= '[' && c <= '_')
                                             {out.write( "["+c+"]\t\t"+"["+lineCount+"]\t\t"+"["+charNum+"]\t\t\t"+"["+(int)(c)+"]"+lineSep );}
                                        else if( c < ' ' )// && (int)c != 0 && (int)c != 9 )
                                             {out.write( "["+c+"]\t\t"+"["+lineCount+"]\t\t"+"["+charNum+"]\t\t\t"+"["+(int)(c)+"]"+lineSep );}
                                        else if( c > ';' && c <= '@' && c != '=')
                                             {out.write( "["+c+"]\t\t"+"["+lineCount+"]\t\t"+"["+charNum+"]\t\t\t"+"["+(int)(c)+"]"+lineSep );}
                                        else if( c >= '!' && c < '"' )
                                             {out.write( "["+c+"]\t\t"+"["+lineCount+"]\t\t"+"["+charNum+"]\t\t\t"+"["+(int)(c)+"]"+lineSep );}
                                        else if( c > 'z' && c < '~' )
                                             {out.write( "["+c+"]\t\t"+"["+lineCount+"]\t\t"+"["+charNum+"]\t\t\t"+"["+(int)(c)+"]"+lineSep );}
                                        else if( c == '%' )
                                             {out.write( "["+c+"]\t\t"+"["+lineCount+"]\t\t"+"["+charNum+"]\t\t\t"+"["+(int)(c)+"]"+lineSep );}
                                        else if( c > '~' )
                                             {out.write( "["+c+"]\t\t"+"["+lineCount+"]\t\t"+"["+charNum+"]\t\t\t"+"["+(int)(c)+"]"+lineSep );}
                                        charNum += 1;
                                           iterator += 1;
                                           i++;
                                lineCount += 1;
         catch (FileNotFoundException ex) {ex.printStackTrace();     System.out.println("File not found.");}
             catch (IOException ex){ex.printStackTrace();               System.out.println("IO Error.");}
         finally{ try{ if( input != null ) input.close();                if( out != null ) out.close();}
                catch (IOException ex){ex.printStackTrace();        System.out.println("IO Error #2.");}
    }

How do i recover lost files and documents?

how do i recover lost files and documents?

Way 1. Recover Deleted Text Messages on iPhone with Backups
1) Recover lost files on iPhone from iTunes Backup
As you know, every time you sync your iPhone with iTunes, it will automatically make a backup of your iPhone contents including photos, SMS, reminders, contacts and more. Step 1. Launch iTunes and connect your iPhone to your computer. Step 2. Choose "Recover form Backup" option. Step 3. Select a backup you need. If you don't know which one to choose, you'd better choose the latest backup. Step 4. Click "Start Scan". Step 5. Preview contents in details and select lost files you need. Step 6. Click "Recover".
2) Recover Deleted documents on iPhone from iCloud Backup
You should make sure that you have backup in iCloud before recovery. Go to Settings < iCloud. Log in to your Apple ID and toggle the Contacts switch from ON to OFF. Then turn it ON and choose Merge on the pop-up message. Then all contacts in the iCloud backup are back to your iPhone 4S.
Way 2. Recover Deleted files on iPhone without Backups
While if you don’t have any backup files in iTunes or iCloud, the unique way is to recover with iPhone Data Recovery. Step 1. Connect your iPhone to the computer and Run the software. Step 2. Click "Start Scan" > Scan data on your iPhone quickly. Step 3. Preview and select lost files you need. Step 4. Click "Recover" to recover them.

How do i scan a file and put it on the hp computer to be put in an email

Similar Messages

Maybe you are looking for