How do I scan my ipad3 for virus

Do I need to scan my iPad for viruses?

In addition to what the others said, the same security features that mean there's no malware also means that there are no proper anti-virus tools. Apps simply don't have the kind of access to the file system on iOS to be able to scan for malware. So, even if you don't believe that there is no malware for iOS, you still wouldn't be able to find a malware scanner, because there aren't any. There are a couple that can, at most, scan your e-mail messages and files in online accounts like Dropbox, because those things exist outside the iOS ecosystem.

Similar Messages

How can i scan my mac for virus's

I download alot of music (not from stupid or untrusted sites) and torrents (mostly movies and music and software) but nothing stupid that i know for sure will infect my Macbook Air............but just to be on the safe side i want to know if their is a safe way i can scan my mac for a virus? from my personal experience anti virus's do more harm than good Suggestion? SOLUTIONS?

1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
Don't be put off by the complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. As I wrote above, it changes nothing. It doesn't send or receive any data on the network. All it does is to generate a human-readable report on the state of the computer. That report goes nowhere unless you choose to share it. If you prefer, you can read it yourself without disclosing the contents to me or anyone else.
You should be wondering whether you can believe me, and whether it's safe to run a program at the behest of a stranger. In general, no, it's not safe and I don't encourage it.
In this case, however, there are a couple of ways for you to decide whether the program is safe without having to trust me. First, you can read it. Unlike an application that you download and click to run, it's transparent, so anyone with the necessary skill can verify what it does.
You may not be able to understand the script yourself. But variations of the script have been posted on this website thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. Any one of the millions of registered users could have read the script and raised the alarm if it was harmful. Then I would not be here now and you would not be reading this message.
Nevertheless, if you can't satisfy yourself that these instructions are safe, don't follow them. Ask for other options.
4. Here's a summary of what you need to do, if you choose to proceed:
☞ Copy a line of text in this window to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
5. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
6. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
7. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts SerialATA 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports ' com.clark.\* \*dropbox \*GoogleDr\* \*k.AutoCAD\* \*k.Maya\* vidinst\* ' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 "` route -n get default|awk '/e:/{print $2}' `" 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB com.apple.AirPortBaseStationAgent 464843899 51 5120 files );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^$[0-9]+$ /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n-\t%s\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' /^ *$|CSConfigDot/d;s/^ */ /;s/[-0-9A-Fa-f]{22,}/UUID/g;s/(ochat)\.[^.]+(\..+)/\1\2/;/Shared/!s/\/Users\/[^/]+/~/g ' ' s/^ +//;/de: S|[nst]:/p;' ' {sub(/^ +/,"")};/er:/;/y:/&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: [^EO]|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Genesy|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<200) print "com.apple.";} ' ' $3~/[0-9]:[0-9]{2}$/ { gsub(/:[0-9:a-f]{14}/,"");} { print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { print "'${p[41]}'";if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$|'${p[41]}'/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/^root$/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1100) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/{next};/(etc|Preferences|Launch[AD].+)\// { sub(".(/private)?","");n++;print;} END { print "'${p[41]}'.plist\t'${p[42]}'";if(n<500) print "Launch";} ' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| |\n","\\|\\|kMDItem'${p[35]}'=");sub("^...."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[43]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/{next};/%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|BKAg|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";p="uniq -c|sed -E '"'s/ +\$[0-9]+\$\$.+\$/\\\2 x\\\1/;s/x1$//'"'";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]$1|p;b=b$1;} END { close(p);if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n [N/A]";"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text$|(Bo|PO).+ sh.+ text ex)/) F=F" ("T")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n ...and %s more line(s)\n",l-L);} ' ' BEGIN{FS="= "} /Name/{print $2} ' 's/0/Off/p' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / / { print "'"${p[28]}"'";exit;};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/$L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9;} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' ' /l: /{ /DVD/d;s/.+: //;b0'$'\n'' };/s: /{ /V/d;s/^ */- /;H;};$b0'$'\n'' d;:0'$'\n'' x;/APPLE [^:]+$/d;p;' ' /^find: /d;p;' "`S0 44 45`" );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps sudo\ crontab sudo\ iotop top pkgutil 'PlistBuddy 2>&1 -c "Print' whoami cksum kextstat launchctl sudo\ launchctl crontab 'sudo defaults read' stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' defaults\ read scutil sudo\ dtrace sudo\ profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil sudo\ lsof test );c2=(com.apple.loginwindow\ LoginHook '" /L*/P*/loginw*' '" L*/P*/*loginit*' 'L*/Ca*/com.ap*.Saf*/E*/* -d 1 -name In*t -exec '"${c1[14]}"' :CFBundleDisplayName" {} \;|sort|uniq' '~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 $' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' :${p[35]}\" :Label\" '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$Message' -k Sender kernel -k Message Req 'bad |Beac|caug|dead[^bl]|FAIL|fail|GPU |hfs: Ru|inval|jnl:|last value [1-9]|n Cause: -|NVDA$|pagin|proc: t|Roamed|rror|ssert|Thrott|tim(ed? ?|ing )o|WARN' -k Message Rne 'Goog|ksadm|SMC:| VALI|xpma' -o -k Sender fseventsd -k Message Req 'SL' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cgh] ! -name *ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true $ -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '-L {/{S*/,},}L*/Lau* -type f' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Ca*/*/Ex,Co{mpon,reM},Ex,Inter,iTu*/*P,Keyb,Mail/B,Pr*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -path \\*s/Resources -prune -o -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,pam.d/*,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t /S*/L*/Lau*/*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' '+c0 -i4TCP:0-1023' com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' "+c0 -l|awk '{print(\$1,\$3)}'|sort|uniq -c|sort -n|tail -1|awk '{print(\$2,\$3,\$1)}'" );N1=${#c2[@]};for j in {0..9};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents launchd Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching SATA Descriptors );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};';done;A7(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0(){ [[ "$v" ]]&&echo "$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "$s"<<<"$v"`&&C1 1 $1;};for i in 1 2;do for j in 0 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;D20 0 $((N1+1)) 2;D10 0 $N1 1;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;D13 0 $((N1+9)) 59 50;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 14 12 14;D22 6 36 13 15;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D22 35 49 61 51;D22 11 17 17 20;for i in 0 1;do D22 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A2 19 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;A2 4 20 21;B7 6;B2 9;A4 14 7 52 9;B2 10;B6 9 10 4;C3 25;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;D13 24 24 32 31;D13 25 37 32 33;A2 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D13 21 0 32 19;D13 10 42 32 40;D22 29 35 46 39;};D13 14 1 48 42;D12 34 43 53 44;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 26 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D23 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 20 42 32 41;D23 14 2 48 43;D13 4 5 32 1;D13 4 3 60 5;D12 26 48 49 49;B3 4 22 57;A1 26 46 56;B7 22;B3 0 0 58;C3 47;D22 4 4 50 0;D23 22 9 37 7;A7;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
8. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
9. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
exec bash
and press return. Then paste the script again.
10. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
11. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report what happened. No harm will be done.
12. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with the words "Start time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
13. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "You are not authorized to post." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
14. This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

How do I scan jump drive for virus on a Mac Pro?

How do I scan a jump drive for a virus on a Macbook Pro?

Kat52 wrote:
Does a new Macbook Pro come with a virus program?
OS X already includes everything it needs to protect itself from viruses and malware. Keep it that way with software updates from Apple. Robust anti-virus and anti-malware protections have been integrated in OS X since its inception, and have only improved in the many years since then. Mavericks represents the beneficiary of all that experience. There is no separate program to install, but there are features you can use and practices you can observe to customize or augment those protections:
OS X Mavericks: Protect your Mac
OS X Mavericks: Protect your Mac from malware
OS X Mavericks: Keep your information safe
OS X About Gatekeeper
About file quarantine in OS X
If you install Windows on your Mac using Boot Camp or virtualization software, Windows requires its own anti-virus measures. That's nothing new.
The following principles are intended specifically for OS X but can be adapted for any operating system or device.
Never install any product that claims to "speed up", "clean up", "optimize", or "accelerate" your Mac. Without exception, they will do the opposite.
Never install pirated or "cracked" software, software obtained from dubious websites, or other questionable sources. Illegally obtained software is almost certain to contain malware.
Don’t supply your password in response to a popup window requesting it, unless you know what it is and the reason your credentials are required.
Don’t open email attachments from email addresses that you do not recognize, or click links contained in an email:
Most of these are scams that direct you to fraudulent sites that attempt to convince you to disclose personal information.
Such "phishing" attempts are the 21st century equivalent of a social exploit that has existed since the dawn of civilization. Don’t fall for it.
Apple will never ask you to reveal personal information in an email. If you receive an unexpected email from Apple saying your account will be closed unless you take immediate action, just ignore it. If your iTunes or App Store account becomes disabled for valid reasons, you will know when you try to buy something or log in to this support site, and are unable to.
Don’t install browser extensions unless you understand their purpose. Go to the Safari menu > Preferences > Extensions. If you see any extensions that you do not recognize or understand, simply click the Uninstall button and they will be gone.
Don’t install Java unless you are certain that you need it:
Java, a non-Apple product, is a potential vector for malware. If you are required to use Java, be mindful of that possibility.
Java can be disabled in System Preferences.
Despite its name JavaScript is unrelated to Java. No malware can infect your Mac through JavaScript. It’s OK to leave it enabled.
Block browser popups: Safari menu > Preferences > Security > and check "Block popup windows":
Popup windows are useful and required for some websites, but popups have devolved to become a common means to deliver targeted advertising that you probably do not want.
Popups themselves cannot infect your Mac, but many contain resource-hungry code that will slow down Internet browsing.
If you ever see a popup indicating it detected registry errors, that your Mac is infected with some ick, or that you won some prize, it is 100% fraudulent. Ignore it.
Ignore hyperventilating popular media outlets that thrive by promoting fear and discord with entertainment products arrogantly presented as "news". Learn what real threats actually exist and how to arm yourself against them:
The most serious threat to your data security is phishing. To date, most of these attempts have been pathetic and are easily recognized, but that is likely to change in the future as criminals become more clever.
OS X viruses do not exist, but intentionally malicious or poorly written code, created by either nefarious or inept individuals, is nothing new.
Never install something without first knowing what it is, what it does, how it works, and how to get rid of it when you don’t want it any more.
If you elect to use "anti-virus" software, familiarize yourself with its limitations and potential to cause adverse effects, and apply the principle immediately preceding this one.
Most such utilities will only slow down and destabilize your Mac while they look for viruses that do not exist, conveying no benefit whatsoever - other than to make you "feel good" about security, when you should actually be exercising sound judgment, derived from accurate knowledge, based on verifiable facts.
Do install updates from Apple as they become available. No one knows more about Macs and how to protect them than the company that builds them.
Summary: Use common sense and caution when you use your Mac, just like you would in any social context. There is no product, utility, or magic talisman that can protect you from all the evils of mankind.

Scan a file for virus before upload

In many CRM functions, eg - Activities, Mkt Planner, etc., there is a tab for uploading/attaching files. How can we scan the file for virus before saving? We have a Basis 620, so we can't use the Virus Scan Interface because it is available from Basis 640 onwards.
I am looking for two things - 1. A method to scan for virus and 2. A user exit where this can be implemented before saving.
Thanks.

http://forum.java.sun.com/thread.jspa?threadID=499566&tstart=200

How do I scan my iMac for a virus, we may have opened an email with a virus

how do I scan my iMac for a virus, we may have opened an email with a virus

http://www.thesafemac.com/mmg/

Since Adobe 11why Norton scanning incoming attach for virus NOT on my system

Confused:
Since Adobe 11why Norton scanning incoming attach for virus NOT on my system use VIPRE? Is it preinstalled with Adobe 11 or something? Thanks!

I completely do not understand what you are asking; can you rephrase your question?

Gmail could not scan zip file for viruses

I received a zip file. MacBook Pro tries to scan for virus and I received a msg that "Gmail could not scan this file for viruses". Does the problem lies with the zip file OR there is some software that I need to download & install before I could download the zip file?

You are wasting your time scanning for viruses.
I have been using Macs since 1984.
I've worked at companies with 50+ Macs.
I've used every Mac OS From 1.1 to 10.6.7
I have never seen a Mac virus or known anyone that has.

HT4943 How do I scan a code for a free download of a magazine on the iPad 1?

How do I scan a code for a free newsstand download on my iPad 1? Thanks for help!

Thanks! I take all my pics on my phone, so I forgot the first IPad doesn't have a camera.

How to SCAN uploaded files for VIRUS in APEX

part 1:
Goal:
Do a virus scan of the uploaded file from APEX application prior to storing the file in custom tables.
The process:
Followed the document from www.developer.com:
Implementing an Anti-Virus File Scan in JEE Applications
By Vlad Kofman
Go to page: 1 2 3 Next
This article will discuss one of the ways to implement antivirus file scanning in Java, particular in the JEE applications. Viruses, Trojan Horses, and different malware and spyware are a real problem for current computer environments, and especially for the Windows operating system. If you are designing any application in Java that has a requirement to be able to upload external files, you have a potential security risk. By uploading, I mean any way to get the external file inside of the corporate firewall be it via HTTP protocol or any other means. It is quite common to have this type of requirement in an enterprise application and with Java being one of the most popular web development platforms, it is unfortunate that this type of gaping security risk is quite often overlooked.
Java's Development Kit (JDK) does not have any means to do the antivirus scan right out of the box. This is primarily because Java is a programming language, and does not have any virus scanning packages. Furthermore, anti-virus software is not Sun's area of expertise or business model. Developing this type of software (or Java package), and more importantly maintaining it, would be a huge task for Sun. Mainly because viruses are constantly evolving and keeping virus definitions up-to-date is a daunting task. Large companies such as McAffee, Symantec, or Zone Labs develop virus detecting and combating products and spend a lot of resources to maintain them.
Application Environment
To implement a virus file scan in Java, a third-party package needs to be used. For the purposes of this article, I will use Symantec Scan Engine (SSE) package, which comes with Java APIs. This package is an application that serves as a TCP/IP server and has a programming interface and enables Java applications to incorporate support for content scanning technologies. For this article, I used Symantec Scan Engine 5.1, which is available as a Unix or Windows install.
If you are using an anti-virus package from the different vendor, you will need to investigate what kind of APIs are available; however, the general approach should be similar. Also, note that my implementation can be used with JEE technology and any modern MVC framework such as Struts or Spring.
The architecture is as follows: A server machine needs to have SSE running at all times. This can be the same machine that hosts your Application Server, but in an enterprise environment this should be a different machine. The Default Port needs to be open through the firewall to allow communication with the scan engine. All JEE applications that need to do file scanning can talk to the SSE server machine through a default port. Also, multiple applications running on different application servers can re-use the same scanning server. For more information, you should refer to the Symantec Scan Engine (SSE) Installation Guide, available on the Symantec web site.
When an external file that needs to be scanned is sent to the SSE via its programming interface (Java APIs using the default port), before any other operation on the file is performed, the SSE returns a result code. For instance, a file is uploaded by an external user into the web email type application as an attachment; then, the SSE API is invoked by the application and the return code of pass or fail determines the outcome of the upload and whether that email can actually be sent. If you have an account on Yahoo mail, you probably have seen that Yahoo is using Norton Antivirus to scan all attachments, although no Java.
Click here for a larger image.
Figure 1: Screen shot from Yahoo
For details on the Scan Engine Server Installationm please see the Symantec Scan Engine (SSE) Implementation Guide from Symantec.
Here are some key things to remember about SSE:
•     Java 2 SE Runtime (JRE) 5.0 Update 6.0 or later must be installed on the server before the SSE installation is done.
•     After installation, verify that the Symantec Scan Engine daemon is running. At the Unix command prompt (if it's a Unix install), type the following command:
ps –ea | grep sym.
A list of processes similar to the following should appear:
o     5358 ? 0:00 symscan
o     5359 ? 0:00 symscan
If nothing is displayed the SSE process did not start.
If the SSE process did not start, type the following command to restart SSE:
/etc/init.d/symscan restart
•     Keeping the virus definition up to date is the most important task and if new updates are not installed, the whole scan becomes ineffective. Symantec automatically downloads the most current file definitions through LiveUpdate. Please make sure that firewall rules are in place to allow the host server to connect to the Symantec update service.
Project Setup
For the purposes of this article, I included a wrapper for the Symantec SSE APIs, av.jar, which has Symantec Java APIs and serves as a client to the SSE server and takes care of all communications with the server. Please refer to the download source section. The av.jar should be included in the Java CLASSPATH to work with the SSE. This jar contains a class called AVClient that takes care of actually sending the files to SSE as byte arrays and returning the result.
In my project setting, I added three variables to be accessed via the System.getProperty mechanism. For example:
AV_SERVER_HOST=192.168.1.150
AV_SERVER_PORT=1344
AV_SERVER_MODE=SCAN
The AV_SERVER_HOST is the host name or IP of the machine where Scan Engine is installed.
The AV_SERVER_PORT is the port where Scan Engine listens for incoming files.
The AV_SERVER_MODE is the scan mode which can be:
•     NOSCAN: No scanning will be done (any keyword that does not start with "SCAN" will result in ignoring the call to the Scan Engine and no files will be transferred for scanning).
•     SCAN: Files or the byte stream will be scanned, but the scan engine will not try to repair infections.
•     SCANREPAIR: Files will be scanned, the scan engine will try to repair infections, but nothing else will be done.
•     SCANREPAIRDELETE: Files will be scanned, the scan engine will try to repair infections, and irreparable files will be deleted.
Note: For the file stream (byte array) scanning, the only meaning full values are "SCAN" and "NOSCAN".
Using the SSE Scanning Java APIs
In any class where scan is required, call the scanning API provided in the AVClient object located in the av.jar. The AVClient object will establish connection to the Scan Engine server and has the following APIs:
Figure 2: The significant APIs for the communication with to the Scan Engine Server.
If scanning a file on the file system, in SCAN only mode, use the call that accepts filename only.
If scanning a file on the file system, with SCANREPAIR or SCANREPAIRDELETE, use the call that accepts input and output file names.
If scanning an in-memory file (byte array), use the call accepting byte array.
For example:
import com.av.*;
Initialize setup parameters:
static String avMode =
(System.getProperty("AV_SERVER_MODE") != null)
? (String) System.getProperty("AV_SERVER_MODE") : "NOSCAN";
static boolean scan = avMode.startsWith("SCAN");
static String avServer =
(String) System.getProperty("AV_SERVER_HOST");
static int avPort =
Integer.parseInt( (String) System.getProperty("AV_SERVER_PORT"));
Scan check example for an in-memory file byte array:
public void scanFile(byte[] fileBytes, String fileName)
throws IOException, Exception {
if (scan) {
AVClient avc = new AVClient(avServer, avPort, avMode);
if (avc.scanfile(fileName, fileBytes) == -1) {
throw new VirusException("WARNING: A virus was detected in
your attachment: " + fileName + "<br>Please scan
your system with the latest antivirus software with
updated virus definitions and try again.");
Note that if you are using this code inside of the MVC handler, you can throw a custom VirusException and check for it in the calling method and perform any necessary cleanup. I have included the class in the AV Jar as well.
For example:
catch (Exception ex) {
logger.error(ex);
if (ex instanceof VirusException) {
// do something here
else {
// there was some other error – handle it
For more details on the Scan Engine Client API, please see Symantec Scan Engine Software Developers Guide.
Continuation in part2

part 4:
c)     Clienttester.java – This is the gui app set to test if the configuration is working or not. This gui uses the method scanfile(inputfile, outputfile) as you can see the result in the outputpane of the jframe.
* clienttester.java
* Created on April 12, 2005, 2:37 PM
* @author george_maculley
package com.av;
import java.io.*;
import java.awt.*;
import java.awt.event.*;
import javax.swing.*;
public class clienttester
implements ActionListener {
// private String ipaddress = "127.0.0.1";
private String ipaddress = "199.209.150.58";
//private String ipaddress = "192.168.0.55";
static JFrame frame;
JFileChooser chooser = new JFileChooser();
TextField pathtofile = new TextField(System.getProperty("user.home"), 30);
// TextField pathtooutfile= new TextField(System.getProperty("user.home"),30);
private int port = 1344;
JButton filechooser = new JButton("Browse to file"); ;
private String originalfilename;
private String outputfilename;
JButton scanbutton = new JButton("Scan");
TextArea outputarea = new TextArea(20, 40);
TextField iptext = new TextField("127.0.0.1", 16);
TextField porttext = new TextField("1344", 5);
AVClient mine;
JRadioButton choosescan = new JRadioButton("SCAN");
// JRadioButton choosedelete= new JRadioButton("SCANREPAIRDELETE");
/** Creates a new instance of gui */
public clienttester() {
public clienttester(java.lang.String ip, java.lang.String infile, java.lang.String outfile, int port) {
this.ipaddress = ip;
this.port = port;
this.originalfilename = infile;
this.outputfilename = outfile;
boolean setValues(java.lang.String ip, java.lang.String infile, java.lang.String outfile, int port) {
this.ipaddress = ip;
this.port = port;
this.originalfilename = infile;
this.outputfilename = outfile;
return (true);
public void actionPerformed(java.awt.event.ActionEvent actionEvent) {
JComponent c = (JComponent) actionEvent.getSource();
if (c == filechooser) {
int retval = chooser.showDialog(frame, null);
if (retval == JFileChooser.APPROVE_OPTION) {
File theFile = chooser.getSelectedFile();
if (theFile != null) {
pathtofile.setText(theFile.getPath());
// pathtooutfile.setText(theFile.getPath());
JOptionPane.showMessageDialog(frame, "You chose this file: " + theFile.getPath());
if (c == scanbutton) {
//return object that can be passed to AVClient
String policy;
int thisport;
int scanresult;
String thisip;
String inputfile;
String outputfile;
outputarea.append("Server: " + iptext.getText() + "\r\n");
if (choosescan.isSelected()) {
policy = "SCAN";
else {
policy = "SCANREPAIRDELETE";
thisport = new Integer(porttext.getText()).intValue();
thisip = iptext.getText();
//mine= new AVClient(iptext.getText(),porttext.getText(),policy);
mine = new AVClient(iptext.getText(), thisport, policy);
if (mine.test() == 1) {
outputarea.append("Sorry. Incorrect parameters specified.\r\n");
System.exit(1);
else {
outputarea.append("Connection to SAVSE initialized.\r\n");
inputfile = pathtofile.getText();
// outputfile=pathtooutfile.getText();
outputfile = "/tmp";
outputarea.append("Scanning file " + inputfile + " \r\n");
if (policy == "SCAN") {
scanresult = mine.scanfile(inputfile);
else {
scanresult = mine.scanfile(inputfile, outputfile);
if (scanresult == 0) {
outputarea.append("File is clean.\r\n");
else if (scanresult == -1) {
outputarea.append("File is infected. \r\n");
else {
outputarea.append("Scan error.\r\n");
void display() {
Frame f = new Frame("SAVSE JAVA ICAP Client");
f.setLayout(new GridLayout(1, 2));
JPanel lpanel = new JPanel(new GridLayout(7, 1));
JPanel ippanel = new JPanel();
JPanel portpanel = new JPanel();
JPanel rpanel = new JPanel();
JPanel outputpanel = new JPanel();
JPanel buttonpanel = new JPanel();
JPanel pathpanel = new JPanel();
// JPanel outpathpanel= new JPanel();
JPanel policypanel = new JPanel();
ButtonGroup policygroup = new ButtonGroup();
filechooser.addActionListener(this);
scanbutton.addActionListener(this);
choosescan.setSelected(true);
policygroup.add(choosescan);
// policygroup.add(choosedelete);
buttonpanel.setBorder(BorderFactory.createTitledBorder("Scan Policy"));
buttonpanel.add(choosescan);
// buttonpanel.add(choosedelete);
pathpanel.setBorder(BorderFactory.createTitledBorder("Path to File"));
pathpanel.add(pathtofile);
f.setSize(new Dimension(650, 400));
f.setBackground(Color.white);
f.setResizable(true);
ippanel.setBorder(BorderFactory.createTitledBorder("SAVSE IP Address"));
ippanel.add(iptext);
outputpanel.setBorder(BorderFactory.createTitledBorder("OUTPUT"));
outputpanel.add(outputarea);
portpanel.setBorder(BorderFactory.createTitledBorder("ICAP Port"));
portpanel.add(porttext);
// outpathpanel.setBorder(BorderFactory.createTitledBorder("Path to Repair File"));
// outpathpanel.add(pathtooutfile);
lpanel.add(ippanel);
rpanel.add(outputpanel);
lpanel.add(portpanel);
lpanel.add(buttonpanel);
lpanel.add(pathpanel);
// lpanel.add(outpathpanel);
lpanel.add(filechooser);
lpanel.add(scanbutton);
f.add(lpanel);
f.add(rpanel);
f.setVisible(true);
public static void main(String[] args) {
clienttester g = new clienttester();
g.display();
d)     my2.java – This is the class file I wrote to test that I am able to send a file and scan it and see the output in the JDEVELOPER. In this case the file is stored on the filesystem of the client machine. JDEVELOPER should be able to see the file.
NOTE:
“EICAR.com” is the test file downloaded from Symantec site to test a non malicious virus file. I n order to be able to test it like this, the Antivirus program running on your machine should be disabled, or else Antivirus will kick in and delete the file. In the first place you will not be able to download the test virus file either with anti virus running on the machine you are downloading to.
package com.av;
import java.io.*;
public class my2 {
static int my_return = 0;
* @param fileBytes
* @param fileName
* @return
public static int scanfile(String fileName){
String avMode = "SCAN";
boolean scan = avMode.startsWith("SCAN");
String avServer = "xx";--avserver ip address
int avPort = 1344;
int the_return = 0;
if (scan) {
AVClient avc = new AVClient(avServer,avPort,avMode);
the_return = avc.scanfile(fileName);
if (the_return == -1) {
return (the_return);
} else
return (the_return);
//my_return = the_return;
return (the_return);
public static void main(String[] args) throws Exception {
System.out.println("Hi there in Main");
byte[] b1 = new byte[4];
b1[1] = 68;
my_return = scanfile("c:\\eicar.com");
System.out.println(my_return);
e)     Then finally we have my1.JAVA, which takes the filename, and it’s contents in the bytes form and scans the file. The reason for this method is we are not storing the file on the filesystem, it is read into the memory and only if it is clean, it is put into the database or else notify the user.
package com.av;
import java.io.*;
public class my1 {
static int my_return = 0;
static int a_length = 0;
* @param fileBytes
* @param fileName
* @return
public static int scanfile(String fileName,byte[] fileBytes) throws IOException {
String avMode = "SCAN";
boolean scan = avMode.startsWith("SCAN");
String avServer = "xxx";--avserver’s ip address
int avPort = 1344;
int the_return = 0;
if (scan) {
AVClient avc = new AVClient(avServer,avPort,avMode);
// File file = new File(fileName) ;
//byte[] fBytes = getBytesFromFile(file);
the_return = avc.scanfile(fileName, fileBytes);
if (the_return == -1) {
return (the_return);
} else
{return (the_return);}
my_return = the_return;
return (the_return);
// Returns the contents of the file in a byte array.
* @param file
* @return
* @throws IOException
public static byte[] getBytesFromFile(File file) throws IOException {
InputStream is = new FileInputStream(file);
// Get the size of the file
long length = file.length();
// You cannot create an array using a long type.
// It needs to be an int type.
// Before converting to an int type, check
// to ensure that file is not larger than Integer.MAX_VALUE.
if (length > Integer.MAX_VALUE) {
// File is too large
// Create the byte array to hold the data
byte[] bytes = new byte[(int)length];
// Read in the bytes
int offset = 0;
int numRead = 0;
while (offset < bytes.length
&& (numRead=is.read(bytes, offset, bytes.length-offset)) >= 0) {
offset += numRead;
// Ensure all the bytes have been read in
if (offset < bytes.length) {
throw new IOException("Could not completely read file "+file.getName());
// Close the input stream and return bytes
is.close();
return bytes;
// public static void main(String[] args) throws Exception {
//System.out.println("Hi there in Main");
// File file = new File() ;
// byte[] b1 = getBytesFromFile(file);
//System.out.println(b1);
// my_return = scanfile(,b1);
//System.out.println(my_return); }
Finally , you have the exceptions file,
e) package com.av;
public class VirusException
extends Exception {
public VirusException() {
super();
public VirusException(String text) {
super(text);
Once you have all these classes, you can use JDEVELOPER , to load these classes into the database: This is as follows:
Right click on the project, which has all these classes.
NEW -> deployment profiles -> load java and stored procedures.
When you are created deployment profile, you have to specify,
Loadjava options.
-f, -v (check the check boxes)
Under privileges:
-s – specify database schema these classes are loaded into
-s – create sysnonym check box
-g – grant to public or any specific users per your policy.
Under Resolver,
-r and –o (check the check boxes)
I accepted the default name storedproc1. Then you right click on the storedproc1.deploy, deploy to whichever database connection you created.
And then, In order to access this java class we need a pl/sql wrapper as follows:
create or replace package my1 is
function mycheck (pfilename in varchar2, psize in number)
return number;
end my1;
create or replace package body my1 is
     function mycheck (pfilename in varchar2, psize in number)
return number is
language java
     name 'com.av.my1.scanfile(java.lang.String, byte[]) return int';
     end my1;
And the code is invoked from sql plus as follows:
Select my1.mycheck(“filename”, “filebytes”) from dual;
One important catch in the above method is to send the filename and filecontents in bytes form. In order to send the file contents as filebytes, you will need another java class and load into the data base as described above.
import java.io.File;
import java.io.FileInputStream;
import java.io.IOException;
import java.io.InputStream;
* This program demonstrates how to read a file into a byte array. This method
* reads the entire contents of the file into a byte array.
* @version 1.0
* @author Jeffrey M. Hunter ([email protected])
* @author http://www.idevelopment.info
public class ReadFileIntoByteArray {
* method to convert a byte to a hex string.
* @param data the byte to convert
* @return String the converted byte
public static String byteToHex(byte data) {
StringBuffer buf = new StringBuffer();
buf.append(toHexChar((data >>> 4) & 0x0F));
buf.append(toHexChar(data & 0x0F));
return buf.toString();
* Convenience method to convert an int to a hex char.
* @param i the int to convert
* @return char the converted char
public static char toHexChar(int i) {
if ((0 <= i) && (i <= 9)) {
return (char) ('0' + i);
} else {
return (char) ('a' + (i - 10));
* Returns the contents of the file in a byte array
* @param file File this method should read
* @return byte[] Returns a byte[] array of the contents of the file
private static byte[] getBytesFromFile(File file) throws IOException {
InputStream is = new FileInputStream(file);
System.out.println("\nDEBUG: FileInputStream is " + file);
// Get the size of the file
long length = file.length();
System.out.println("DEBUG: Length of " + file + " is " + length + "\n");
* You cannot create an array using a long type. It needs to be an int
* type. Before converting to an int type, check to ensure that file is
* not loarger than Integer.MAX_VALUE;
if (length > Integer.MAX_VALUE) {
System.out.println("File is too large to process");
return null;
// Create the byte array to hold the data
byte[] bytes = new byte[(int)length];
// Read in the bytes
int offset = 0;
int numRead = 0;
while ( (offset < bytes.length)
( (numRead=is.read(bytes, offset, bytes.length-offset)) >= 0) ) {
offset += numRead;
// Ensure all the bytes have been read in
if (offset < bytes.length) {
throw new IOException("Could not completely read file " + file.getName());
is.close();
return bytes;
* @param filename
public static byte[] chk_file(String filename) {
byte[] fileArray = null;
try {
fileArray = getBytesFromFile(new File( filename));
} catch (IOException e) {
e.printStackTrace();
if (fileArray != null) {
for (int i=0; i<fileArray.length; i++) {
System.out.println(
"fileArray[" + i + "] = " +
((int)fileArray[i] < 9 ? " " : "") +
( ((int)fileArray[i] > 9 && (int)fileArray[i] <= 99) ? " " : "") +
fileArray[i] + " : " +
" HEX=(0x" + byteToHex(fileArray) + ") : " +
" charValue=(" + (char)fileArray[i] + ")");
return fileArray;
* Sole entry point to the class and application.
* @param args Array of String arguments.
public static void main(String[] args) {
byte[] fileArray = null;
try {
fileArray = getBytesFromFile(new File("c:\\eicar.com"));
} catch (IOException e) {
e.printStackTrace();
if (fileArray != null) {
for (int i=0; i<fileArray.length; i++) {
System.out.println(
"fileArray[" + i + "] = " +
((int)fileArray[i] < 9 ? " " : "") +
( ((int)fileArray[i] > 9 && (int)fileArray[i] <= 99) ? " " : "") +
fileArray[i] + " : " +
" HEX=(0x" + byteToHex(fileArray[i]) + ") : " +
" charValue=(" + (char)fileArray[i] + ")");
Having main method helps you to run the file in JDEVELOPER or using JAVA.
DO not forget to load this class into the database.
And you create the pl/sql wrapper again as follows:
create or replace FUNCTION TOBY (pfilename in varchar2) RETURN VARCHAR2 iS
language java name
'ReadFileIntoByteArray.chk_file(java.lang.String) return byte[]';
And you call the function from sqlplus as follows:
Sql>Set serveroutput on size 20000;
Sql> call dbms_java.set_output(20000);
Sql> Select toby(“filename”) from dual; --
this file should be accessible, I mean you will not be able to send a file on your pc, from sql plus as sql/plus is running on your db server.
You will be able to see the output in sql plus:
If you are running it from the APEX:
When we use file browser widget from APEX, the file is stored in APEX_APPLICATION_FILES table. And we retrieve that into a variable and pass this variable to the function as follows:
DECLARE
scan_failed EXCEPTION;
x varchar2(400);
z number;
BEGIN
select filename into x from wwv_flow_files where name = :P1_FILE_NAME;
select my1.mycheck(x,toby(x)) into z from dual;
if z = 0 then
:P1_SUBJECT:= 'PASSED';
else
:P1_SUBJECT:= 'FAILED';
end if;
:P1_SCAN_RESULT := '** Scanning File **';
IF UPPER(:P1_SUBJECT) = 'PASSED' THEN
BEGIN
:P1_SCAN_FLAG := 'PASSED';
:P1_SCAN_RESULT := :P1_SCAN_RESULT || ' ** File passed scan **';
END;
ELSIF UPPER(:P1_SUBJECT) = 'FAILED' THEN
BEGIN
:P1_SCAN_FLAG := 'FAILED';
:P1_SCAN_RESULT := :P1_SCAN_RESULT || ' ** File failed scan **';
END;
ELSE
BEGIN
:P1_SCAN_FLAG := 'UNKNOWN';
:P1_SCAN_RESULT := :P1_SCAN_RESULT || ' ** Scan Is Not Conclussive **';
END;
END IF;
--IF :P1_SCAN_FLAG = 'FAILED'
-- THEN RAISE scan_failed;
--END IF;
EXCEPTION
WHEN OTHERS THEN
DELETE from APEX_APPLICATION_FILES WHERE name = :P1_FILE_NAME;
RAISE_APPLICATION_ERROR (-20000, 'seb OTHERS error encountered - file upload not allowed. Possible virus detected !');
raise;
END;
ACKNOWLEDMENTS:
1) JOHN SCOTT – who suggested this ICAP API in one of the threads which is my initial starting point in this direction.
2) VLAD KOFMAN who wrote the article on WWW.DEVELOPER.com
3) Mr. KIRAN –One of the engineers from Metalink, who helped me at every step of getting this java programs and pl/sql wrappers working. But for him, I would have not completed my project.

How do i scan multiple pages for one attachment

I know how to scan but I don't know how to scan multiple pages for one attachement....Help please

Hi dagda24,
You can scan multiple pages into a single document with the scan to PDF option. Use the following steps to do so:
1. Open MP Navigator.
2. Click One Clcik.
3. Click Save to PC.
4. Change the File Type from PDF to PDF (multiple pages).
5. Make any other changes as needed, then click scan.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

Using ARD for scanning remote computers for Virus

This might be way out, but does anyone know of a unix command or something that can be sent remotely to remove viruses from Mac desktops using ARD. We have a few viruses that although are not effecting our macs are being send to Windows users and they then have to deal with the virus.
Thanks

There is no direct command for virus checking in UNIX, so no, not as such unless you know specifically what files needed to be removed in which case standard UNIX rm commands would work. Otherwise you'd have to have a virus application on the Mac that could be run via command line, and I don't know of any unless perhaps ClamXav does (the underlying ClamAV engine is command-line based but I'm not sure if ClamXav still allows access).

How do I scan my computer for malware?

I have been reading about the adobe malware virus, and my computer actually found one and took care of it. But I was wondering if there is a way that I could scan for it myself.

You can use Mac Malware Remover 1.1.1 to scan and remove trojans. However, if you have the Flashback Malware Removal Tool 1.0 from Apple installed, then you should be OK.
Helpful Links Regarding Flashback Trojan
A link to a great User Tip about the trojan: Flashback Trojan User Tip
A related link in the tip to a checker: Malware Checker Dowload Link
A Google search can reveal a variety of alternatives on how the remove the trojan should your computer get infected. This can get you started.
For now I recommend the User Tip from etressoft to detect and remove:
Checking for and removing the "Flashback" trojan
Kaspersky Flashback Trojan Site:Flashback Trojan Detection and Removal
Also see Apple's article About Flashback malware.

How do i check my macbookpro for virus'

Have had a possible virus invasion on my macbook pro, to gain acces to sensitive banking details. how can i firstly prevent any future invasions and secondly how can i identify the current problem if ti exists. Suggest anti-viral software?

There are no current OS X virus's, however, if you want to install antivirus software, most will recommend http://www.clamxav.com . I've used it for years with no issues, and have it scanning incoming mail and downloads. It can warn of phishing emails, which is perhaps what you received.
If you install it, after updating the virus signatures, do a full disk scan, which will determine if there is anything to be concerned with.

Can ClamXav scan incoming email for viruses?

Hi,
I'm new switching from windows to imac and I've insalled ClamXav antivirus, which from what I have heard others say on this forum, is a fine antivirus program for an iMac.
The program seems more manually oriented than windows' antivirus programs - meaning that I choose what and when to scan.
That's all fine but I am wondering if it automatically scans incoming email, or if I can set it up to automatically scan incoming email.
I appreciate any light anyone could shed on this program for me. Of course, if you all prefer that I contact ClamXav, I can do that and sorry for any inconvenience.
Many Thanks, Frank B.

I use ClamXav, yes it does scan email.
However, may I suggest that you configure ClamXav in the Preferences/General preference pane to scan and alert you to found viruses and to not move infected files to a quarantine folder. Because of the structure of the Mail.app, ClamXav sees the mailbox as a file and will quarantine the entire mailbox if just one email is infected. It is a pain to get the mailbox back to the Mail.app.
HELP! ClamXav deleted all my email. What can I do?
I like the ClamXav app and recommend it for you with this one configuration suggestion.

How do I scan and remove a virus from my iPad?

MY iPad has been having many bad things go on like only one of the speakers works, videos are all messed up into thousands of miniature squares that are obviously not meant to be that way. When I type it won't type as fast as my fingers and I type rather slowly. It will be loading an unlabeled and un identifiable something with and without the internet on even when all of the applications are closed.
Do these these things stand for that somebody is pirating my information or uploading stuff without permission? Who can help out with the issues without it being unaffordable? Please offer me plenty of ideas and options to save things before replacements are demanded. The problems are the same in my iPhone 4S. Might this mean that I have it in my iCloud Account?

If the iOS devices have not been jailbroken or hacked, they cannot get a virus...there are none for the iOS devices. You may be experiencing overload of the system or hardware problems. To see if it is a system overload, double click the home button and dismiss each app by swiping the material above the app icon up and off the top of the screen. That terminates the app and dismisses it.
Then reboot by holding both the power and home buttons until the apple logo appears, ignore the red slider if that appears.
Then see if the bad behavior continues. If it does, visit an Apple store genius bar and have the techs run their diagnostics to see if the hardware has problems.

How do I scan my ipad3 for virus

Similar Messages

Maybe you are looking for