How do I scan on my HP deskjet 1510 all in one series? Theres' no button on the printer?

there's no scan button on my hp deskjet 1510 all in one series printer? how do I scan?

Hello,
If you go to the following location and identify what PC operating system you are using, it provides instructions on how to scan to your computer:
http://h10025.www1.hp.com/ewfrf/wc/documentSubCategory?tmp_rule=26675&tmp_task=useCategory&cc=us&dlc...
I work for HP, However, I am speaking for myself and not for HP

Similar Messages

  • Is it possible to connect HP DESKJET 1510 All-in-One series Wireless printer without USB cable?

    my mom recently bought me the HP DESKJET 1510 All-in-One series so i have an at home printer for school work. but when we bought it we did not know there was a certain USB that had to connect to the printer. so we bought the wrong one. now i have a project due and i cannot print. we have a small USB that fits it but its hard to connect it to the computer and printer because its so small. so if we can have it sent to the printer without the USB that would be perfect!

    Hi,
    No, in many cases printers won't come with USB cables. You need a cable which is similar to the following one:
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • My brand new HP Deskjet 1510 all-in-one series Cant print

    This new HP 1510 All in one series that I just bought is not consistent in printing and most of the times it picks the paper and makes a bipping sound and then stops. It will then give a printing error report and spit out the paper with no print. This is driving me crazy. I have uninstalled and installed a couple of times but the problem persists. At times it prints and at times it doesn't. you can barely tell when it is going to print and most of the times it doesnt. I really need suggestions please

    Hello there @Drawingston , welcome to the forums
    I read your post about your Deskjet 1510 not printing consistently from your Windows 8.1 system, and when it prints, the pages are blank. I will surely try to help you!
    I would suggest that you try a few things, they are:
    Run the Print and Scan Doctor. This diagnostic tool will check for any conflicts that could be causing the issue. The tool will show you a report at the end. Please send me the results in a screen shot or write them in a response.
    Try a different USB cable that runs directly from the back of the printer, to the PC.
    Click this guide and try cleaning the paper rollers: The Printer Does Not Pick Up or Feed Paper
    Reset the printer and make sure the printer is plugged in directly to the wall outlet, avoiding power bars and surge protectors.
    Try printing again from more than one program.
    Let me know all of the results
    Good luck!
    R a i n b o w 7000I work on behalf of HP
    Click the “Kudos Thumbs Up" at the bottom of this post to say
    “Thanks” for helping!
    Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

  • HP Deskjet 1510 All-in-one series

    Every time I try to connect to printer to my laptop the usb doesn't connect them. Trying to figure out what to do at this point, it's a brand new printer.

    Ok, can you uninstall the 1510 software and download the full feature driver software from HP. (link)Do not connect the 1510 until asked.

  • My HP Deskjet 1510 All-in-One Prints Test Page But not emails or Web Pages, ect

    My Deskjet 1510 All-in-One Printer is Hooked up. All tests show a Green Arrow, It is Turned on, and Online. It will Print a TEST PAGE, but nothing else. I have Run the HP DR Support program several times to no avail. No Error Codes or Signs appear. It simply will NOT WORK other than printing a TESTPAGE or Scanning Copies on the Printer/Copy Machine. Please Help. I have been trying to get it to work for a week. It IS a New Printer. I have tried it on 2 seperate Computers which work well with other Brands of Printers. One Runs Windows 7 Home Premium 64 Bit, Acer Aspire Desktop. The Other a Dell T5400 running Windows 7 Professional 64 Bit . Printer is set as DEFAULT. ALL SOFTWARE is UPDATED AND INSTALLED. It says it is installed properly, and that it is Hooked up Properly, Yet it will NOT work properly. Thank you.

    Welcome to the HP Community , I read through your post about the printing issues you have been having, and I hope to help you! Seeing how the printer will make copies and test print tells us that the printer itself is fine and there is no hardware issues. However, seeing how printing from two different computers will not work, flags a software problem on the computers. Please try out the steps below and get back to me with the results and we will go from there. If you did not install the Full Driver, run the HP Printer Install Wizard for Windows to search and install the complete driver and software. This will need to run on both computers individually. Manually restart the print spoolers on the computers:1. Click Start
    2. Type "Services" in the search field.
    3. Open SERVICES
    4. At the bottom, click "Extended View"
    5. Search for Print Spooler
    6. Right-click it and choose Properties
    7. Select as Automatic in the drop down box, close the Window
    8. Right click on Print Spooler and choose "Stop", wait until it stops and then right click again and "Start".
    9. Close out of Services and try printing from Notepad.10. Try printing from a web browser now, if there is a problem with the print, try a different web browser.  Show thanks for my reply to help you today by hitting the "thumbs up" icon below!I hope to hear from you, good luck! 

  • Scanner not working hp deskjet 1510 all in one

    Hi.. i have hp deskjet 1510 all in one printer, at first all are working so well. but after 3 days scanner is not working. Everytime i try to scan "hp series not found" will appear. I also tried the print and scan doctor but it shows Hp twain scan error. I dont know whats the problem. i tried to uninstall and install it again using the installation cd and so with the the software and driver provided by hp but still not working. Pls help me to fix this one. Thank you...

    Hi jkshipra22,
    Thank you for your reply! For further assistance I will need to know:
    If the printer is able to make copies by itself. Copy Text or Mixed Documents.
    If the power cable plugged into a surge protector, or directly to the wall outlet. Issues when Connected to an Uninterruptible Power Supply/Power Strip/Surge Protector. This applies to Inkjet printers as well.
    In the meantime, please try our HP Print and Scan Doctor, and let me know what happens.
    Hope to hear from you, and have a nice day!
    RnRMusicMan
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to say “Thanks” for helping!

  • I NEED A FREE DOWNLOAD FOR MY PRINTER/DESKJET F300 ALL IN-ONE-SERIES/HP

    I NEED A FREE DOWNLOAD FOR MY HP DESKJET F300 ALL-IN- ONE SERIES,OR ANY 325 SERIES.

    Hi,
    You will definitely get FREE from the following link:
       http://h20000.www2.hp.com/bizsupport/TechSupport/ProductList.jsp?cc=mx&taskId=135&prodSeriesId=11293...
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • Trying to make new scan shortcut in HP Deskjet 2544 All-in-One

    Good morning,
    Because of a major computer crash I recently had to purchase a new computer and as a result I also had to buy a new Printer because my older Photosmart was not compatible with my new system.
    I now am using a HP Pavilion 23-g017c  (x64) AMD A6-5200 APU w/Radeon HD Graphics, running Windows 8.1 and using IE 11 with Zone Alarm Firewall and Antivirus& Spyware.
    My new printer is a HP Deskjet 2544 All-in-One.
    I am trying to see if there is any way I can add a new shortcut to my scanning options which will enable me to scan a document to my computer besides the two options available now (PDF and TIF).
    I would like to be able to scan directly into my Microsoft Office 2013 Word program if possible.
    The reason being is because I find it easier to edit and then print from my Word program than a PDF program.
    Is this possible?
    Thanks and regards,
    2harts4ever
    This question was solved.
    View Solution.

    Hi @thefewtheproud
    I have done some research, and it turns out you are not likely doing anything wrong. I downloaded the software for this printer, and it seems that the version 32 software has omitted the ability to save your document files as anything other than PDF or TIFF.
    With the older software, the solution I posted above would have worked, but I feel like our software has taken a step back instead of forward. The only solution I can think of at this point is not ideal, but is doable. You could download a file converter, save your files as PDF then convert them.
    I even tried saving a scan as a PDF, then opening it with different programs and saving it using 'Save As" and changing the file type there. I chose .txt , but then when I open it in Word or a text program, the formatting is lost.
    Basically, the only think I can suggests is a conversion program. I am sorry I misinformed you in my first post, this was an oversight on my part, I forgot that the version 32 software was different from the older versions.
    Please click the Thumbs up icon below to thank me for responding.
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Sunshyn2005 - I work on behalf of HP

  • How do I install driver for hp psc 2400 all in one series AND safe wsnmp32.dl​l Without a Disk?

    How do I install driver(s) for hp psc 2400 all in one series ( WIndows 7 laptop)   AND a safe version of wsnmp32.dll -- Without a Disk?    A tech took the driver off my laptop and I now have no printer/scanner.  Help!!
    Much thanks!

    Hello,
    I see that you're having an issue installing the software. I would suggest following this document, which will guide you through several steps on how to resolve the issue.

  • HP Deskjet F4200 All-in-One-series printer

    My printer shows an E in the start copy window and it says by black ink is low, which I just replaced brand new last week and it was printing great until last night. What do I do?

    Welcome to the forums Natalee!
    I saw your post about the issue you are having with your F4200 model showing you an E and giving you a low ink alert for the black cartridge. If you have already tried a new cartridge, please let me know which model of F4200 you have and I will look for troubleshooting guides for you to try.
     HP Deskjet F4210 All-in-One Printer
     HP Deskjet F4235 All-in-One Printer
     HP Deskjet F4240 All-in-One Printer
     HP Deskjet F4280 All-in-One Printer
    Thank you
    R a i n b o w 7000I work on behalf of HP
    Click the “Kudos Thumbs Up" at the bottom of this post to say
    “Thanks” for helping!
    Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

  • How to use scan feature on HP Officejet 4355 All-in-one

    sir
    when pressing scan button on the device..it shows 'No Scan Options' and also it shows 'refer to device documentation to troubleshooting'

    Hello thuho,
    Welcome to the HP Forums.
    I see that you are having an issue when attempting to scan.
    I do have a few troubleshooting steps we can try.
    First thing we are going to do is reset the printing system.  Here is a link that gives you detailed instructions on How to reset the printing system.
    The nest step would be to Repair disk permissions.
    Once you have the first two steps completed, I then suggest that we install the HP Printer Drivers v.2.16.1 for OS X.
    Please let me know if you have any other questions or concerns and I will be more than happy to help.
    Cheers,   
    Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    W a t e r b o y 71
    I work on behalf of HP

  • How do I scan to Mac using HP 2540 All in one

    Im new to mac and also there are no scan buttons on printer, I am trying to scan various pages to email but cannot find how to?

    HI @LAB8080,
    Welcome to the HP Forums!
    I see that you are trying to scan to an e-mail with your HP 2540 to your Mac. I am happy to help you with your scanning!
    I am not sure which Mac you are using so here are the Mac How to Scan guides:
    Scanning with the Full Feature HP Software in OS X v10.10 Yosemite.
    Scan from OS X v10.9 Mavericks With the Full Feature HP Software for HP Multifunction Printers.
    Scan from OS X v10.8 Mountain Lion With the Full Feature HP Software for HP Multifunction Printers.
    Scan from OS X v10.7 Lion With the Full Feature HP Software for HP Multifunction Printers.
    How to Scan: Mac OS X v10.6. 
    If you don't know which version of Mac you have, please see this guide. OS X: Finding your OS version and build information.
    I believe this information will answer your questions. If not, please let me know if you have any further concerns!
    RnRMusicMan
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to say “Thanks” for helping!

  • How do I scan numerous documents on Officejet 8600 All-In-One but make them one file?

    I have an HP8600 officejet All-In-one.  I need to scan about 10 pages and make it one file instead of 10 separate sheets.  Can you tell me how to do this?

    LnorWilson,
    Welcome to the HP Forum.
    The following may help.
    Dragon Documents Collection:
    Scan_Multiple_Documents-Combine
    Click the Kudos Thumbs-Up to show you appreciate the help and time from our Experts.
    Click Accept as Solution when the Answer is a good Fix or Workaround!
    Although I strive to reflect HP's best practices, I do not work for HP. 
    Kind Regards,
    Dragon-Fur

  • Deskjet 2540 All-in-One Series

    I literally just bought this printer, specifically to scan documents, and cannot figure out how to scan. Someone PLEASE HELP!

    Hi,
    Please use the first guide on the following link to set it up and use the second guide for printing, scanning (page #32) and others.
         http://h10025.www1.hp.com/ewfrf/wc/manualCategory?cc=us&dlc=en&lc=en&product=5295967&
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • HP deskjet 2540 all in one series

    moved to printer topics for better assistance

    Hello lidixia,
    Welcome to the HP Forums.
    I see that you are having an issue when attempting to install the printer on to your computer and then printing any thing other than a test page.
    Please make sure that you have disabled any Windows Firewalls and any Anti Virus protection you may have running and then attempt to reinstall the software and drivers again.
    If the troubleshooting does not help resolve your issue, I would then suggest calling HP's Technical Support to see about further options for you. If you are calling within North America, the number is 1-800-474-6836 and for all other regions, : click here.
    Thanks for your time.
    Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    W a t e r b o y 71
    I work on behalf of HP

Maybe you are looking for

  • Extraction:scripts of objects in database to a FILE

    Hello .... I m extracting the codes of objects(procedures,packages....) its working fine ...but for some objects its not entirely writing the lines from source say for one objects if there are 1000 lines its writing only 700 lines... declare v_handle

  • Wake for network access won't wake

    I have my MacPro connected wirelessly to my MacBook Pro and both are set to "Wake for network access" but neither of them wakes the other up when trying to connect to each other. Any ideas? Thanks guys!

  • Changing Mandates in Mass

    Dear expert, We want to change in mass the status of mandates by using  FSEPA_M4 transaction. We have 3 options: 1- Button " Change mandates immediately" at the selection screen 2- Button "Change Mandates initial" at the display of the list of mandat

  • Misuse of the "Edit Message" functionality in forums.

    Hi, I have been observing for some time now that some users are actually misusing the option of editing their forum post. This is partly due to the fact that the time stamp for the message is not updated when the edit is done. It still shows the time

  • Basis for creating the dimension for the cube

    Dear All, I have one basic query. We can build the ODS and pull data from source system to BW system. But now if i am suppose to build the Cube for my reporting then how do i make decision to build dimension for the cube? I mean what are the paramete