How do I search a site using radio buttons
I am trying to search a site using radio buttons. I have one table and 5 columns. I have 5 radio buttons marked like 01, 02, 03,04,05. I am using Dreamweaver cs5 php, when I click the radio button 01 I will like to get the response with all 01 files. I will like to mention that the file names are like 01-010-1, 01-010-2 and than 02-020-1 and so fourth I do not know how to write the advance query
This is what I have
SELECT QBF, ADDRESS, NATSO, TSOCNT, PDF (this re my db columns)
FROM alldwgs (this is my table)
WHERE QBF like %colname% (this is the column that contains the file names 01-010-1 etc)
ORDER BY QBF ASC
I don’t know what to write on the variable box
Name: colname
Type: text
Default value: 01
Run time value: $_GET['QBF']
I hope that you understand my question I am new to this. Thank you very much for your response
Thank you for your reply. I am new to editing a pdf and using these programs. I have subscribed to Acrobat XI Pro. When I try to edit the document it directs me to LiveCycle. I cannot move the table in LiveCycle. It won't let me, and I cannot make changes in XI Pro as I did in the trial as it directs me to edit in LiveCycle. Am going in circles.
Similar Messages
-
How to disable the inputfield using radio button dynamically in module pool
How to disable the inputfield on the screen using radio button dynamically in module pool.
Please suggest .
Thanks.
Edited by: Lavanya YH1504 on Jul 30, 2010 1:20 PMI got it thank you.
LOOP AT SCREEN.
if screen-GROUP1 = 'LA1'.
If RADIO1 = 'X'.
SCREEN-INPUT = '0'.
MODIFY SCREEN.
ELSEIF RADIO2 = 'X'.
screen-input = '1'.
ENDIF.
MODIFY SCREEN.
ENDIF.
ENDLOOP.
ENDMODULE. " STATUS_0100 OUTPUT
Edited by: Lavanya YH1504 on Jul 30, 2010 1:51 PM -
How to use Radio Buttons in SAP BI 7 for a set of three fields?
Dear SAP Gurus,
We are using SAP BI 7. We need to use Radio button to select one field name (out of a set of three fields) which
appeared on selection screen.
The scenario is; we have three fields
1) Field Name A
2) Field Name B
3) Field Name C
Now, we need to select one field(using Radio button) from the above and later the report related to the above
selected field should be displayed.
The three reports will be as follows:
1) Report A
2) Report B
3) Report C
if Field Name A is selected then Report A will be displayed,
if Field Name B is selected then Report B will be displayed and
if Field Name C is selected then Report C will be displayed.
To display the report we have two cases;
1) There will be a common selection screen and all the three reports will come in single workbook but in seperate worksheet.
2) There will be a common selection screen and all the three reports will come in same worksheet, one after the other.
Is it possible to create the report in this manner, if yes, please suggest the steps.
Regards,
DV.I think you would just use commands to do the following:
1. Hide report Analysis Item 2 and Analysis Item 3 if the 1st button was pushed.
2. Hide report Analysis Item 1 and Analysis Item 3 if the 2nd button was pushed.
3. Hide report Analysis Item 1 and Analysis Item 2 if the 3rd button was pushed.
Hope that helps... -
How to use Radio buttons in WAD to select different condition in a query
Hi Guru,
I am new to WAD, I want to use radio buttons in selection screen of query for different selections based on selection criteria. I am aware of executing different queries using different radio buttons. but i want to use single queries for different radio button selections.
I have found some relevant topic to it but not got exact solution. Please guide me.Hi Avinash,
Drag a DropDown webitem into your template. Under DropDown webitem properties, Data Binding -> Fixed List of Options.
Fixed Option -> Action -> Command via Command Wizard, Command -> Commands for Data Providers -> Data Provider Commands for Filter Values -> SET_SELECTION_STATE_SIMPLE. Data Provider Affected -> choose the main DP Query here. Characteristic -> choose Employee Group characteristic here as present in your DP Query. Sign -> INCLUDING, Operator -> EQUAL_SELECTION, Equals -> MEMBER_NAME, Member Name -> specify the value here i.e. Employee1 etc.
Repeat above Fixed Option step for Employee2, Employee3 etc. selections. For 'All' option choose Command CLEAR_SELECTION_STATE with Data Provider Affected as the main DP Query & Characteristic as Employee Group.
--Priya -
Issue in using radio button in module pool
For same field I need 2 different search help. Based on radio button on screen I need company codeu2019s from different table. Issue is, at execution radio button remains blank. Radio button works only when I use them in PAI under CASE SY-UCOMM. WHEN u2018DONEu2019. IF Normal_Run = u2018Xu2019u2026u2026
Can I use radio button with the below code. Please refer the below code.
PROCESS ON VALUE-REQUEST.
FIELD COMP_CODE MODULE POPULATE_COMP_CODE.
MODULE POPULATE_COMP_CODE INPUT.
IF REPEAT_RUN = 'X'.
PERFORM COMP_CODE_POPULATE.
ELSEIF NORMAL_RUN = 'X'.
PERFORM COMP_CODE_POPULATE_N.
ENDIF.
ENDMODULE.
FORM COMP_CODE_POPULATE .
SELECT COMP_CODE
FROM ZIFRS_D_PROCESS
INTO CORRESPONDING FIELDS OF TABLE VALUES_TAB_CC
WHERE PROC_NAME = 'DEPRECIATION RUN'.
READ TABLE VALUES_TAB INDEX 1.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
EXPORTING
RETFIELD = 'COMP_CODE'
DYNPPROG = PROGNAME
DYNPNR = DYNNUM
DYNPROFIELD = 'COMP_CODE'
VALUE_ORG = 'S'
TABLES
VALUE_TAB = VALUES_TAB_CC.
ENDFORM. " COMP_CODE_POPULATION
FORM COMP_CODE_POPULATE_N .
CALL FUNCTION 'F4IF_FIELD_VALUE_REQUEST'
EXPORTING
TABNAME = '/BI0/SCOMP_CODE'
FIELDNAME = 'COMP_CODE'
DYNPPROG = PROGNAME
DYNPNR = DYNNUM
DYNPROFIELD = 'COMP_CODE'.
ENDFORM. " COMP_CODE_POPULATE_N
Moderator Message: Please use "code" tags to format the code snippet.
Edited by: Suhas Saha on Nov 23, 2011 5:13 PMHi
You need to make the Grouping for these Radio button on the screen
Search for how to make Radio buttons grouping
radio buttons in screen painter
http://help.sap.com/printdocu/core/print46c/en/data/pdf/BCDWBTUT/BCDWBTUT.pdf
and search for Radio button Group in this document
assign a Function Code for one of the radio buttons(It allows for only one Radio Button)
This triggers automatic PAI so when you take the F4 Help this is readily available
In TOP include make sure you define the variables corresponding to the Radio buttons on the screen and also provide default value X to one of the Radio buttons
Hope this serves your purpose
Cheerz
Ramchander Rao.K -
How to get current row(Based on Radio button check) submit button Click
Hi i hava Query Region Search(Based On Auto Customization Criteria).
For Showing Results iam Using Table Region.
Using Radio button How we get the row reference value using Submit button Click.
Please Help on this .
Thanks & Regards
SanHi san ,
Try this
if ("EventID".equals(pageContext.getParameter(EVENT_PARAM)))
String rowRef = pageContext.getParameter(OAWebBeanConstants.EVENT_SOURCE_ROW_REFERENCE);
OARow row = (OARow)am.findRowByRef(rowRef);
VORowImpl lineRow = (YourVORowImpl)findRowByRef(rowRef); // Replace your vo name .
Please refer this link , Let me know if its not clear .
Single Selection in table Region in OAF .
Keerthi -
Using Radio Buttons in widget to store Data
I am building my 2nd widget and I am curious to know if anyone has used radio buttons within the edit mode to change/modify/set variables before. I don't want a radio button widget. I want a complex menu widget that will hide/show selected items within my playbar such as the forward button.
Currently I am using User variables to determine all the hide/shows for my playbar. But I would like to make it more user friendly by having a visual widget people could use to turn buttons on off, set url's for help documents etc. And have everything be based on a per slide basis. just wondering if anyone has done anything like this in the past.
The other part of this is, can I use a widget to construct User variables. In As2 I was able to create variables in root and then set those accordingly without having to add them to every projects user variables. But it appears in AS3 it is not possible to create a variable of a clip/objects parent is anyone familiar with this?
Thanks ahead of time.
zsrcHi zsrc,
If you're using WidgetFactory then here's a post that might give you the information that you need.
http://www.infosemantics.com.au/widgetking/2010/11/widget-properties-how-theyre-used/
As far as the code you'd write in your circumstance, a radio button's selected property tells you if it's... well... selected. So you can write that to a widget property like so:
properties.MyPropertyName = myRadioButton.selected;
That line would be inside the saveProperties template method as mentioned in the article above.
override protected function saveProperties():void
properties.MyPropertyName = myRadioButton.selected;
Then you can read that property back when the widget is in the published Captivate movie.
override protected function enterRuntime():void
if (properties.MyPropertyName == true) {
// The Radio Button was selected. Do stuff
} else {
// The Radio Button wasn't selected. Do stuff? -
How to set the a graphic ( 3 radio buttons ) in the report ?
Hi Exports,
1. How to set the a graphic ( 3 radio buttons ) in the report ?
Acutely I want to fetch the record from MCHB-CLABS and MCHB-CSPEM , if the data read from MCHB-CLABS will show the green light otherwise if read from MCHB-CSPEM, it will show red light.
(e.g : if syntax error in report it is showing red light signal , like that how to set in report program)
Thanking you.
SubashHi,
In your internal table declaration, include yet another field for lights..
DATA: begin of itab,
lights type light,
end of itab.
DATA: GV_LAYOUT TYPE SLIS_LAYOUT_ALV.
GV_LAYOUT-LIGHTS_FIELDNAME = 'LIGHTS'.
Use the GV_LAYOUT in your FM to display the ALV.
IS_LAYOUT = GV_LAYOUT
If itab-lights = 1 => Error
itab-lights = 3 => Success
itab-lights =2 => Warning -
How can I display choice type as radio button ?
HI,
I used SPD 2013 to create a workflow , action --- collect date from user .
I created one choice type item , but display style only drop down list and check box .
How can I do to display as radio button?
And other question , I don't want to display delete ITEM in this page . how can I do it ?
Thanks a lotHi,
According to your description, my understanding is that you want to change the drop down list control to radio button control in the task form.
I suggest you can use InfoPath to change the control to radio button like below:
For hiding "Delete Item" action in the task form, I suggest you can add the Jquery to the PlaceHolderMain tag of "WrkTaskIP.aspx" within layouts folder path:
C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\15\TEMPLATE\LAYOUTS\WrkTaskIP.aspx
More information:
Jquery Hide
Thanks
Best Regards
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected] -
How to change color when I using delete button?
Hi experts,
When I using delete button on input schedule before enter any data, it display the same color on the data range, how can fix the color after using delete button? or is it a formatting problem?
BPC ver : 7.5 sp3 for NW
best regard
Evans.Evans,
Is delete button custom made? i think it is possible with Formatting Range.
check the below for advanced formatting.
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/70573b01-657a-2b10-a2b2-ec54bb0a9c8c?quicklink=index&overridelayout=true
I think you need use CHANGED as value for CRITERIA. I don't think NW doesn't support CHANGED value for CRITERIA i guess.
Thanks,
Ben. -
How to add the BexAnalyser as standard radio button to the add-ins?
HI All,
how to add the BexAnalyser as standard radio button to the add-ins.
Thanks
VasuWhat do you want to do? Pls give some more details.
-
Related selects using radio button
Hi All,
I wanna use radio button with three options and one dropdown
box .
my problem is i wanna choose option from radio button and run
the related query to get the values into dropdown box and then
choose the value from drop down and submit it to another page.
Any ideas ? please help me.
Thanks in advanceGoogle coldfusion related selects and adjust the javascript
so that you are using radio buttons instead of a select.
I recently posted my own code. Look for the keyword
etiologydetail. -
How can I see Web sites using Adobe Flash Player with my IPad?
I've realised that it's not possible to visit web sites using Adobe Flash Player.
Is There a program by which Apple allows you to solve this problem?Not from Apple, no, and probably never will be. You can try one of the third-party app/service combinations for playing Flash such as Skyfire , Puffin, or iSwifter. One of those might work for you, though they all have limitations and do not work with all Flash-based sites and services. You may find other suggestions for apps in the many other threads on Flash in this forum.
Regards. -
How to use radio buttons in sap smartforms
hi,
i saw the radiobutton option in web properties is there any way to display thee radio button in smartforms...
Kindly share ur suggesstions
Thanks in AdvanceHi rsa.Hema,
go to text element (editor) then
change editor
then insert
then characters
then SAP symbols
then choose the symbol for radio button
or use 698 in the change editor screen
Regards.
Saurabh Goel -
How to Modify Search for Leads using Date types in the Assgmnt Block Date
Hello Experts,
I have a requirement to modify the search for Leads using Dates in the Assignment Block Dates and using the Posting Date of the transaction.
Any ideas?
Thank you in advance,
JustinIf you look at the grants, you'll see that there are over 170 objects from the FLOWS_030000 granted to PUBLIC:
SQL> select count(*) from dba_tab_privs where owner= 'FLOWS_030000' and grantee = 'PUBLIC';
173
If we were go grant these privileges to a role, called APEX_APP_RU, and grant this role to APEX_PUBLIC_USER and any schemas an application is linked to (Workspace to Schema), would that be a workable solution?
The only problem I see right off hand that this might not work is that PUBLIC has synonyms created for the FLOWS_030000 objects. If we revoke the underlying privileges, because of the synonyms, this might not work.
SQL> select COUNT(*) from dba_synonyms where table_owner = 'FLOWS_030000' and owner = 'PUBLIC';
176
Does anyone else have any ideas?
Maybe you are looking for
-
Get child users of composite role
Hello There is FM (ESS_USERS_OF_ROLE_GET ) which bring all user of roles but what i want it's more complicated IF there is composite role i want to get all the user that in the roles under the composite role . Let say i have composite role with two r
-
Hi I am using a Atmel Aviiva SM2 Linescan camera with a PCI-1426 frame grabber - I am operating it in triggering mode with an external trigger of 10Khz and exposure times of 20 us,40 us & 80us - The height of acquisition is set to 1 - The number of
-
I have just rented a film and clicked the menu button instead of pause. When I go back to the film to rent again it says I have already rented this go to settings and check for downloads. But there is no download option in settings?
-
2 renderers in layout set reading from different areas of km repository
Good Day I have a layout set which contains 2 collection renderers. Each renderer must display content from different areas of the km repository in a way that is controlled by the KM Navigation iView parameters "Path to root folder" & "Path to initia
-
Router for small business Internet connection
One of our clients recently switched ISPs to Speakeasy who installed a Hatteras HN 407 bridge. We have had Internet connectivity problems using their SonicWall 3060 firewall, and we experienced similar problems when attempting to use a newer Sonicwal