How do i Secure & recover file from shared folder

Hi All,
I have Windows server 2008 R2 environment and one shared folder created on this with restricted permission by file sharing & security, now 1. I want to add one more restriction that owner of the folder should not able to delete that file? If this is
not available with Microsoft then
2. How do i recover file which deleted from MAP drive...
Please help me to resolve this issue...
Kalpesh Chauhan

As to your first problem, I am not so familiar. But, as to the second problem, I think I can help.
In fact, I have ever also accidentally deleted my hard drive files. In order to re-access them, I have also posted my question in forums, just like you. Fortunately, after browsing many related answers and threads, I just know that a third
party data recovery program can be a good chance to go on.
So, I follow some instructions in these forums and select three drive recovery freeware to go on, including Recuva, iCare Data Recovery Free and TestDisk and so on.
Finally, I have restored all my needed data back successfully with these freeware.
So, I hope it will also help you out.
PS: Never forget to back up everything important on different hard drives or places in case of any similar data recovery problems in the future.

Similar Messages

  • HELP! How can i restore/recover files from Bootcamp with Boot Failure - Missing operating system error?

    Hi,
    I am having a few problems with bootcamp on my imac. When i tried to move the bootcamp partition on windows 7 into free space, it crashed and turned off. Ever since i have had the error 'Missing operating system' and it fails to boot. I have some very important files on the bootcamp partition. Is it possible to recover these files or even to restore the bootcamp partition to it's original state? I do not have a backup of my bootcamp partition. Another problem i have is that ever since i tried to expand my macintosh HD partition into free space, when i hold alt while booting up (to choose which partition to boot like i normally do), the bootcamp partition has stopped appearing. This means that i cannot even boot the windows 7 bootcamp partition anymore!
    So basically here are my 2 questions:
    How can i restore/recover files from Bootcamp with Boot Failure - Missing operating system error?
    How can i make the Bootcamp partition appear in Startup Disk and when i hold the option key while starting up my computer to allow me to boot windows 7?
    Any solutions are very much apreciated!
    Thanks!
    I know that bootcamp (disk0s4) hasn't been fully deleted since it appears in disk utility (i cant do anything to it though)
    And here is the error i see when i try to launch bootcamp (back when i was actually able to boot up bootcamp to the error screen)

    WinClone 3 is OS X and saves Windows image it makes for restore - that should work but you will have to try and you would need to make a new image unless it also works with a native Windows system restore image. It is now supported and has come a long way.
    http://www.twocanoes.com/
    Paragon Clone OS works and does disk-to-disk clone just like CCC you end up with two bootable drives. But does not work with your setup. It would let you clone and move your Windows install to an SSD or another disk drive though and be bootable.
    During its clone process it checks for errors which is very helpful and lets you know - something CCC and others should adopt more of.
    http://www.paragon-software.com/downloads/demo.html
    I wish for our/my sake you had re-read and rewritten the long 'story' and broken it into a brief list of facts we needed.
    OS X
    Windows
    Backup (though external is much safer) and you want bootable OS X clones as well as TimeMachine
    https://support.apple.com/kb/HT1427
    https://support.apple.com/kb/HT1553
    There are a number of things to do like chkdsk and others as well as Windows DVD to do automatic system repairs and find out why.
    AppleHFS - the abilty to mount and read HFS volumes can be notorious.
    I would rearrange and redo your storage setup and how you use the 4-5 internal hard drive bays.

  • Windows 2008 : How to Restrict Users to Copy file from Shared Folder

    Hello All,
    I need to Restrict Users to Copy file from Shared Folder. Please let me know is there any method to achieve this requirement.

    If user have Read permission, they can copy it. So actually you cannot restrict user from copy your files if they could read/edit.
    Some programs could help restrict users from edit/modify/copy the content of their files such as Office files, PDF files etc as Oscar said above.
    TechNet Subscriber Support in forum |If you have any feedback on our support, please contact [email protected]

  • How can I bring a file from a folder on my desktop to this program and make it editable. Like deleti

    How can I bring a file from a folder on my desk top int this program and make it editable., in order to replace words or remove words or texts..?  jn

    Hi,
    FormsCentral cannot be used to edit existing PDF documents. That functionality is available in Adobe Acrobat:
    http://www.adobe.com/products/acrobat.html
    Regards,
    Brian

  • Can't copy file from Shared Folder

    Hi,
    Does anyone here knows how to copy file from shared music. I can view others shared music but can't do anything about it. When I tried to Right Click on music I want to copy. There are only 3 options (Get info, Unchecked Selection & Copy). I chose copy, but don't know what to do next. I wanted to place it in my Library but don't have an option to do it.
    Please help.
    Thanks,
    guadz

    I've never copied music, but have you tried just dragging the file to your library? Not 100% sure if it works, never tried it myself. Also, if you right click in your library, can you paste?

  • How to Copy an Image File from a Folder to another Folder

    i face the problem of copying an image file from a folder to another folder by coding. i not really know which method to use so i need some reference about it. hope to get reply soon, thx :)

    Try this code. Make an object of this class and call
    copyTo method.
    import java.io.*;
    import java.net.*;
    import java.util.*;
    public class FileUtil
    extends File {
    public FileUtil(String pathname) throws
    NullPointerException {
    super(pathname);
    public void copyTo(File dest) throws Exception {
    File parent = dest.getParentFile();
    parent.mkdirs();
    FileInputStream in = new FileInputStream(this); //
    Open the source file
    FileOutputStream out = new FileOutputStream(dest); //
    Open the destination file
    byte[] buffer = new byte[4096]; // Create an input
    buffer
    int bytes_read;
    while ( (bytes_read = in.read(buffer)) != -1) { //
    Keep reading until the end
    out.write(buffer, 0, bytes_read);
    in.close(); // Close the file
    out.close(); // Close the file
    This is poor object-oriented design. Use derivation only when you have to override methods -- this is just
    a static utility method hiding here.

  • How to get latest added file from a folder using apple script

    Hi..
    I am trying to get a latest added file from a folder..and for this i have below script
    tell application "Finder"
        set latestFile to item 1 of (sort (get files of (path to downloads folder)) by creation date) as alias
        set fileName to latestFile's name
    end tell
    By using this i am not able to get latest file because for some files the creation date is some older date so is there any way to get latest file based on "Date Added" column of a folder.

    If you don't mind using GUI Scripting (you must enable access for assistive devices in the Accessibility System Preference pane), the following script should give you a reference to the last item added to any folder. Admittedly not the most elegant solution, but it works, at least under OS X 10.8.2.
    set theFolder to choose folder
    tell application "Finder"
        activate
        set theFolderWindow to container window of theFolder
        set alreadyOpen to exists theFolderWindow
        tell theFolderWindow
            open
            set theInitialView to current view
            set current view to icon view
        end tell
    end tell
    tell application "System Events" to tell process "Finder"
        -- Arrange by None:
        set theInitialArrangement to name of menu item 1 of menu 1 of menu item "Arrange By" of menu 1 of menu bar item "View" of menu bar 1 whose value of attribute "AXMenuItemMarkChar" is "✓"
        keystroke "0" using {control down, command down}
        -- Sort by Date Added:
        set theInitialSortingOrder to name of menu item 1 of menu 1 of menu item "Sort By" of menu 1 of menu bar item "View" of menu bar 1 whose value of attribute "AXMenuItemMarkChar" is "✓"
        keystroke "4" using {control down, option down, command down}
        -- Get the name of the last item:
        set theItemName to name of image 1 of UI element 1 of last scroll area of splitter group 1 of (window 1 whose subrole is "AXStandardWindow")
        -- Restore the initial settings:
        click menu item theInitialSortingOrder of menu 1 of menu item "Sort By" of menu 1 of menu bar item "View" of menu bar 1
        click menu item theInitialArrangement of menu 1 of menu item "Arrange By" of menu 1 of menu bar item "View" of menu bar 1
    end tell
    tell application "Finder"
        set current view of theFolderWindow to theInitialView -- restore the initial view
        if not alreadyOpen then close theFolderWindow
        set theLastItem to item theItemName of theFolder
    end tell
    theLastItem
    Message was edited by: Pierre L.

  • How to read .mdb file from shared folder

    Hi All,
    In one of my local computer I have a shared folder and within the folder I have a .mdb file. Now I am trying to read that file from MII. I have tried with Get_File_List action block. I am providing the following information to Get_File_List
    Folder :
    <Computer Name>\<Shared Folder Name>
    Mask: .mdb
    But in return of Get_File_List, I am not getting any file related information. It is only providing like below
    <Rowsets>
    <Rowset>
    <Columns>
    <Column Description="Name" MaxRange="0" MinRange="0" Name="Name" SQLDataType="1" SourceColumn="Name"/>
    <Column Description="Date" MaxRange="0" MinRange="0" Name="Date" SQLDataType="93" SourceColumn="Date"/>
    <Column Description="Size" MaxRange="100" MinRange="0" Name="Size" SQLDataType="4" SourceColumn="Size"/>
    <Column Description="LastWriteDate" MaxRange="0" MinRange="0" Name="LastWriteDate" SQLDataType="93" SourceColumn="LastWriteDate"/>
    <Column Description="ReadOnly" MaxRange="1" MinRange="0" Name="ReadOnly" SQLDataType="4" SourceColumn="ReadOnly"/>
    <Column Description="FullPath" MaxRange="0" MinRange="0" Name="FullPath" SQLDataType="1" SourceColumn="FullPath"/>
    </Columns>
    </Rowset>
    </Rowsets>
    Can anybody suggest me how to achieve it.
    Thanks in advance
    Chandan

    Hi Chandan,
    Specify the mask as *.mdb and try.
    Thanks,
    Dipankar

  • Cannot delete file from shared folder

    While I was looking for another file in my shared folder, I discovered a jpg file named shannonhenry.jpg. All it appears to be is a school photo of a boy, maybe 14 or so. I tried to move it to trash to delete it because I do not know who this kid is, and I got an error message saying that I do not have sufficient priviledges. Anyone know what this file is or could be????

    Well Kelley, that photo did not come with the system so it had to come from you or someone else putting in the Shared folder.
    Choose the file and "get info" (command- i) turn the dislclosure triangle on "Ownership & Permissions" make sure you can "read & write" and make yourself the "owner"(open the lock and enter your admin password).
    Then check under General, turn the disclosure triangle and be sure the "locked" box in NOT checked.
    Let us know.
    -mj
    [email protected]

  • How to get all image files from a folder to wwv_flow_files?

    Hi there!
    Is it possible in apex to show, in a report look-a-like, all image filenames from a folder in another machine (i enter in that machine by ip) and insert all files into wwv_flow_files?
    I want to see all files, then pick one and open a image...
    But it can't be by browse item... it has to show all filenames as a list...
    If it is possible, how can i do it?
    Thanks!
    Best regards,
    Luis Pires

    Hi,
    you can connect to the server using UTL_HTTP.
    Then for each files you copy the response into a BLOB to be able to show it or to store it in a table.
    A piece of code :
    begin
       -- initialize the BLOB.
       dbms_lob.createtemporary(l_blob, false);
       -- path to the file
       l_url := 'http://your_server/your_file.jpg';
       -- begin retrieving the target.
       l_req := utl_http.begin_request(l_url);
       -- identify ourselves (some sites serve special pages for particular browsers)
       utl_http.set_header(l_req, 'User-Agent', 'Mozilla/4.0');
       -- start receiving the response.
       l_resp := utl_http.get_response(l_req);
       -- copy the response into the BLOB.
       begin
          loop
             utl_http.read_raw(l_resp, l_raw, 32767);
             dbms_lob.writeappend (l_blob, utl_raw.length(l_raw), l_raw);
          end loop;
          -- stop when exception end_of_body is raised
       exception
          when utl_http.end_of_body then
             utl_http.end_response(l_resp);
       end;
    end;It's a minimal example, you may need authentication, check l_resp.status_code, etc...

  • Read file from shared folder

    Hi,
    I want to read a file "test.txt" from the server "XY" (my own PC) with the shared folder "devices$"
    I want to check first whether the file exists:
    FileInfo myFile = new FileInfo(@"\\XY\devices$\test.txt");
    if (myFile.Exists)
    Console.WriteLine("exists");
    else
    Console.WriteLine("does not exist");
    The result is always "does not exist" even though the file exists, why??

    I tested your code, It works fine on my side. So i doubt whether the file
    exists.  Please check your file. Or do you have right to access the file?
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • How do I open a file from a folder, process it, then open the next ?

    I have a folder full of items. I want to open the first item which is a 3d file, process it with the 3d application -- by automating the mouse clicks, then save the file, then go do the same with the next file in the folder. I see an item called open folder contents and open finder items, but it just opens them all at once.
    Thanks for any help.
    Dan

    Having a little trouble with this as it only runs once even with the loop.
    I open a folder full of files dispense them, then do a watchmedo action then loop at the end. But it only does the first file. Any hints?
    Thanks,
    Dan

  • How to merge portlet.xml file from shared libraries into an EAR application

    Hi all
    I need some help
    I have some applications as shared-libs referenced by weblogic.xml into a EAR application.
    To see all portlets from that shared-libs, I'm creating a portlet.xml into the EAR application with all portlets from all shared libs. But is terrible for me. I would like to have it merged automatically without having to create it in the EAR application. Is that possible?
    Regards
    Bruno

    In the documentation, I saw this text:
    Overriding Shared J2EE Library Settings in the web.xml File
    At runtime, the web.xml files in all the shared J2EE libraries are merged, along with the web.xml
    file in your portal web project. The content of your WEB-INF/web.xml file overrides anything in
    the shared J2EE libraries, so if you want to change particular settings, you can do it there.
    There are many other files for which file contents are merged; these can be overridden in the same
    way. These files include not only WEB-INF/web.xml but also WEB-INF/weblogic.xml and any
    files mentioned in weblogic-extension.xml from either the users' application or the shared
    libraries.
    It seems to be possible to customize the weblogic-extension.xml. But I haven't seen how to do that
    What do you think about it?
    Regards
    Bruno

  • How do I move a file from one folder to another in th K1?

    When I long click a file name a I get a popup list and move is listed. When I press move, the filename gets highlighted, but I can't drag and drop it. What am I doing wrong?
    Solved!
    Go to Solution.

    Which file explorer app are you using?
    If it's the "File Mgmt." app, with the round icon that looks like the front of a folder, after long-clicking the file and selecting Move, go to the folder that you want that file moved to, and select Operation at the top, then Paste.  It is not drag-n-drop.

  • Is there a way to recover files from a folder that has accidentally been overwritten?

    Need help real bad coz I stand to lose a lot of articles I have written and could make up my portfolio...

    Restore them from your backup or use a product such as Data Rescue or FileSalvage.
    (58586)

Maybe you are looking for