How do I see an external HD connected to my AE ?

How do I see an external HD connected to my AExtreme. My AE is working flawlessly with my Apple and non-Apple devices.  The HD is formatted with NTSB so both Apple and PC can access the files.  The USB HD works fine with direct USB connection. I use AP Utility 5.6 to configure.  The HD is clearly registering as it is on the AirportExpress Utility Disk pane.  I just cannot see it on my desktop or in the finder.  I do have the home network protected with WPA and the HD has a password (which I don't know where to enter in the Utility.  Thanks in advance

Any replies to this one? Anyone????

Similar Messages

  • How can i see which devices are connected to my wireless network?

    how can i see which devices are connected to my wireless network?

    Login to your router and view the DHCP clients.

  • How can I have the external HD connected to my Airport Extreme show up on Windows 7 and 8.1?

    So, I have an Airport Extreme which works flawlessly.  I have a 1 TB external HD connected to it.  On my Maccbook Pro and a windows 7 laptop, I can view the HD as "Z".  For some reason, on another Windows 7 and Windows 8.1 Laptop, it is not showing up under my computer.  Any advice?  THANKS!!

    You can share files with iOS devices by using filebrowser or other file app.
    To play movies on the iOS device though you would need a player that is outside of itunes.. because itunes will not play from the router.. it has no media extensions.. neither does the TC which merely adds an internal disk but is otherwise identical.
    So look up how to play movies with a player on the iOS.. there is several available I am sure.
    http://www.pcadvisor.co.uk/how-to/apple/3512138/how-put-films-on-ipad/
    BUT itunes depends on a computer running in the network.. so storing the itunes library on the AE is useless.. and will slow the network down no end. It is much better to put files where they can be accessed.. ie directly on the computer.

  • How do I see what devices are connected to my iTunes

    How do I tell what devices are connected to my iTunes

    You can't see what devices and/or computers that your account is logged into, all you can do is see which (if any) are associated to your account : iTunes Store: Associating a device or computer to your Apple ID.

  • Help!!! How can I see what devices are connected to my icloud

    How do I know what devices and computers are linked to my icloud? Used it once at my ex boyfriends house on his computer and I think my photo stream is going to his desktop??? How can I tell and if so disconnect from it?

    My brother asked me for my account one day but i don't know if he used it to connect icloud or to just download an app. I just want to see if his device is connected to my icloud and if so, i want to disconnect him. So is there any site or anything i can do to see what devices are connected?

  • How can i see what devices are connected to my icloud?

    I want to know if pictues from my mac are on any other devices. How can i see what other devices i have connected to my icloud?

    My brother asked me for my account one day but i don't know if he used it to connect icloud or to just download an app. I just want to see if his device is connected to my icloud and if so, i want to disconnect him. So is there any site or anything i can do to see what devices are connected?

  • How do i see which devices are connected to my airport router

    How do I see which wi fi devices are hooked up to my router?  Also, my Verizon Network Extender is not working with my new airport express router?  How do I get it to work?  My system and GPS lights are red on the extender.

    How do I see which wi fi devices are hooked up to my route
    Open AirPort Utility
    Hold down the option key on your Mac while you double click on the AirPort icon
    Click on each wireless device displayed for more info about that device
    Also, my Verizon Network Extender is not working with my new airport express router?
    Apple uses proprietary settings for their "extend" feature on their routers, so it would be extremely unlikely that a device from another manufacturer would be compatible for this purpose.

  • IMac G5 see always external display connected

    Hey,
    I watch movies on my TV with my iMac G5 (i use the mini-VGA adapter).
    When i don't use the adapter, the iMac just see the internal display (called iMac), but now it always see an external VGA display.
    I tried resetting PRAM, NVRAM, SMU, but no change.
    I have installed Mac OS on an external hard-drive to see if it was a config problem, but it's always the same.
    That's a problem cause it uses the half memory of my graphic card.
    Perhaps the graphic card has a problem ?
    I don't know what to do.
    Thanks for your help.

    Make sure that the PRAM battery is under 4 years old.
    Then zap the PRAM.

  • How can I see my external drive again after installing mavericks?

    Hi,
    I just upgraded my Mac Book Air to Mavericks and I cannot see my external hard drives any more. The data is still there and can be read on other computers. Regular USB keys are also detected.
    What should be done so that the external hard drive become "visible" again with Mavericks?
    Thank you very much and regards,

    Hi Niel,
    Unfortunately, the box was already checked. I tried to "uncheck" and "check it again", but it still does not work.
    What else can be done?
    Thank you very much and regards,

  • HT3728 how do I see IP addresses of connected devices to my airport extreme

    I'm trying to reuse a Net Gear N600 router I had to shelve since I installed my Airport Extreme router as an access point.  I need to see other IP addresses so I can configure the N600 IP address as 10.0.1.xxx.  The only way to make sure I don't use an already used IP address for the N600 is to see what IP addresses are used by the system.
    The only support I've found here is how to set up a distributed network using other apple airport extreme devices.
    Has anyone done/added a second non-apple router configured as an access point to an airport extreme.  If you have please let me know what you did.  I intend to have the N600 connected via ethernet cable to my airport extreme to extend both my wifi network and connected devices.
    Thanks,
    Steven

    Download the fing app on an iOS device

  • How can I see what equipment is connected to my network?

    I use a Time Capsule for my home network. Is there a way for me to see each device that is connected to my network at any given time?
    There has been an unknown device continue to show up in finder under "shared".... I've reset my network password a couple times and the device continues to show up. (Its identified as "npica53cf")
    Thank you

    Its identified as "npica53cf"
    I think HP has used default network printer hostnames in the format: npi + last 6 digits of the device's MAC address (e.g. "ca53cf").

  • How to disable UltrNav when external mouse connected

    Is there a way to have the UltraNav turned off automatically when an external mouse is connected?
    When typing it’s too easy to inadvertently touch the UltrNav and if you’re not watching find you’re typing in a different location, so we like to turn it off. But when I need to quickly access the laptop I would like to use the UltrNav and not have to find and connect the mouse.
    I can turn it off/on through the control panel/system tray, however it’s near impossible to turn on without a mouse.
    Our users have gotten use to this feature in other laptop brands but according to the Lenovo help desk it’s not available.  

    Hi, GDodman
    Unfortunately, I don't think this option is currently supported on Lenovo Think brands. I did some research on the topic and attempted to change the settings of UltraNav, but was not able to find this function. If you find that UltraNav is too easy to inadvertantly tap while typing, then I would recommend changing the sensitvity to a lower setting to reduce future misclicks and random movements.
    Best of luck,
    Adam
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution!" This will help the rest of the community with similar issues identify the verified solution and benefit from it.

  • How can I see "access point" for "connection method" to use Bluetooth tethering?

    I have been using WiFi tethering.  However, as everybody knows, the battery of my Nexus 5 goes down so fast.  Now I wish to use Bluetooth tethering.  I updated my Nexus 5 to Android 5.0.  I have a desktop PC, notebook PC and new Surface
    Pro 3 all with Windows 8.1 Update.  Up to pairing everything goes OK but when I click the "Nexus 5" graphic on the control panel, I could see only "direct connection" (no "access point").  Some website indicates "KB290440"
    but it is not found in the history of update.   I would therefore appreciate if somebody would kindly help me to use Bluetooth tethering.
    By the way, the Windows system I am using is Japanese.
    Thank you in advance.
     

    Some website indicates "KB290440" but it is not found in the history of update.  
    That's the latest "servicing stack".  I think it is optional.  More significant I think would be whether you have the latest rollup, which is also optional, so far.  E.g. at the top of View your update history see what you have for 
    "Most recent cumulative update: "
    FWIW here is mine:
    http://support2.microsoft.com/?kbid=3000850
    HTH
    Robert Aldwinckle

  • HT204023 How can i see who are those connected to my hotspot?

    Sometimes my hotspot go 4-7 connections and I want to know who they are by not asking people around me. Is there any other way?

    Agree that the password is required.  But while using my laptop in the car (I was not driving !), I had the status "2 connections".  So I'm wondering what other device was connected, especially on the highway.
    Is it possible that when another device is trying to connect that your phone shows as one connection, even though the password is not yet entered?
    I get a similar thing in the office, which is more normal since a few devices may be around.

  • How can i see the password after connected the WiFi

    i want to see the wifi password on my iphone 4

    Passwords are encrypted, they do not display or they would not be secure.

Maybe you are looking for