How do I see my two Macs on the same screen?

This may sound like an extremely stupid question but if I want to use Migration Assistant, how can I see what's going on on both computers when I have only one screen? I have an old Mac Mini and a new Mac Mini. I've hooked them up using an ethernet cable. Am I supposed to be able to see the old hardrive on the new machine?
If I am supposed to hold down the letter T, do I do that just before I turn on the old Mac?
I think it may be simpler just to copy the files I want onto a thumb drive and do it manually.
I'm sure there's a very simple step I'm missing. I even tried watch instructional videos on youtube but can only see instructions on how to do it when you have two screens---a laptop to a desktop, laptop to laptop, etc.
I'd appreciate it if someone could help me with this.
Thanx.

I've never used Migration Assistant, but I'd suggest you get to the point where Migration Assistant asks you if you want to pull data from another drive, then connect the old Mac mini to the new Mac mini by Firewire, and boot it using Target Disk Mode (holding 'T' like you said). The most you'll have to do is move the keyboard from the new Mac mini to the old one temporarily. Migration Assistant should then recognise the boot drive on the old mini and you can proceed.
GL.

Similar Messages

How can I set up two iPhones with the same contact, photos, music etc... but a different sim card and phone number. They will both be my phones, but one will be for use in other countries.

How can I set up two iPhones with the same contact, photos, music etc... but a different sim card and phone number. They will both be my phones, but one will be for use in other countries.

Phone A = phone with information you want duplicated
Phone B = phone that you want to copy from A
Backup Phone A.
Wipe Phone B using these instructions. What to do before selling or giving away your iPhone, iPad, or iPod touch - Apple Support
Phone B should be on the 'Hello' screen. Do not swipe it. Launch iTunes. Plug in Phone B.
When iTunes asks if you want to set up as new phone or restore from backup, choose restore from backup of Phone A.
After this setup, any changes to one phone (i.e. adding a contact, downloading an app) will have to be manually duplicated on the second phone, if that is your desire). Making changes to one phone will not affect the other after setup.

Can you be logged into two macs at the same time?

can you be logged into two macs at the same time?

Basically, yes. If there's some kind of issue, please describe it a little.

Two persons with the same screen name?

Am I seeing things, or here we have two persons with the same screen name?
http://forums.adobe.com/people/Federico_Plat%C3%B3n
http://forums.adobe.com/people/federico%20platon
(Yes, I know it's really two identities belonging to the same person, but to my eye both screen names look identical on screen; and I thought the system prevented entering a screen name already in use).

Jochem van Dieten wrote:
Claudio González wrote on 4/21/2010 9:53 PM:
Rick, I must confess that I had never thought of looking for participant's screen names down there. And I still find it curious that the accent is absent at the obvious position of screen names.
Have you ever considered investigating this sort of thing? Create a new
Adobe ID, change values for userID, screenname, firstname and lastname
on the Adobe side and see what changes on the Jive side? The logic may
turn out to be surprisingly simple.
No, I haven't and most probably I will not, at least in the foreseeable future. I have enough problems with my own account, and I waste too much time as it is on re-logging in, and on waiting for pages to load and messages to be posted, to indulge in such an investigation. Even if the logic behind two accounts that on screen seem to be associated with exactly the same screen name turns out to be exceedingly simple.

How to share iphoto with two users in the same imac maverick

I can´t find the way to share iphoto/itunes with two users in the same imac with maverick software

In conclusion, the new software is worse than the old one, really? Because in my old mac I could share easily without copy with an external USB
It's not iPhoto that dropped the ball but the system. I believe it was Mavericks that broke the Shared folder compatibility for iPhoto, not iPhoto itself.
Also having the library on an external HD is a good way of freeing up space on the boot drive to assure optional system and application performance.

How do i syncronise two macs on the same network

I currently have a macbook pro, and that is now going to be my home office computer. I am about to buy a macbook air as my travel laptop. I will need them to have the same information on how do I keep them syncronised when I update information on one or the other.

How to Keep Two Macs in Sync
osx - How to keep two Macs in sync?
syncing two macs: what will work...:
Synchronizing two Macs using an Intermediary
Sync several Macs: sync Macs with Mac OS X sync tool SyncMate
Best Sync app for two macs?

How to share iTunes with two users on the same mac.

My wife & I use the same iMac with different user accounts. How do we share one iTunes account on that computer. I tried moving the iTunes folder in music on my user account to shared user, but it seems like new iTunes folders are created in the original location when I do this. What am I doing wrong.

EddyS45 wrote:
My wife & I use the same iMac with different user accounts. How do we share one iTunes account on that computer. I tried moving the iTunes folder in music on my user account to shared user
Then hold Option and launch iTunes.
Select Choose library... and select the iTunes folder in /Users/Shared/ folder.

How can I connect two macs in the same network?

Both are connected to the same network. One via ethernet and the other via Wifi (Airport Extreme). Both share the same Internet conection. I have followed instructions for files sharing. I can access only the computer linked to my home network via ethernet, but not the other way. It does not found the server address provided in file sharing by the computer conected via Wifi. Any clue? Can it be that the IP address of the Wifi conected is DCHP?

Are you using Connect to Server or Shared sidebar in the Finder? What OS X versions do the two machines run?

IPhoto '09 version 8.1.2. can two macs have the same library?

I am running iPhoto '09 version 8.1.2 and have an iMac and a MacAir. How do I have one photo library, say on the iMac, that is then replicated onto the MacAir?

There are two ways to "sync" the two libraries.
#1 - with the two Macs connected download and use SyncPhotos
Here's how it works:
it compares the databases and/or album.xml files of Libraries A and B.
the files in A that are not in B are imported into B by copying the original files from A into B's Import folder.
it then does the same for B.
metadata is not copied.
It can be used to just copy from A to B and not sync both ways if desired. It will work with 2 libraries that are different versions, i.e. between an iPhoto 08 and iPhoto 09 library. This method does not require you to make the decision of which photos to sync.
NOTE: this method does not sync keywords, titles, ranking or descriptions.
#2 - download and use the paid version of iPhoto Library Manager to copy the Events in Library A that are not in LIbrary B to Library B. Then select those Events in Library B that are not in A and copy to A.
This method requires you to make the determination which photos (Events) to copy between libraries. It does copy all metadata, keywords, titles, etc. as well as Faces and Places.
OT

How to count frequency of two signal at the same time ?

Hello every one
please help me with this one i am really stuck.
The situation   : I have two square wave signal, and i want to measure the frequency of both of themat the same time.
the problem : Error -50103 occurred at DAQmx Read (Counter DBL 1Chan 1Samp).vi:3
Please see the attachement.
i also have 3 analog inputs to be measured.
but i dont have any problem with the analog inputs,,,multiple analog inputs can easily be measured,,,,,but the prob lem is in the digitl (square wave ) signals.
Attachments:
i want to use two counter input.GIF ‏54 KB
two counter tasks1.vi ‏250 KB

NI has an excellent overview of the accuracy and tradeoffs of the different freq measurement methods titled "Making Accurate Frequency Measurements." To boil down the essence of it, the (possibly) increased accuracy of the 2-counter method depends on a relatively long collection / accumulation time which would in turn typically limit the rate at which you could update your measured freq value.
Now let me offer some friendly but blunt advice. LabVIEW makes it easy to collect data. However, there are many other factors affecting the usefulness of that data. I support the dictum: "It is hard to measure *well*."  Choice of sensors, their sensitivity to environment, various sources of noise, an understanding of the decision to be made from the data, programming methods, etc. And even more etc.
What I mean is that just because a hardware freq measurement can be performed that is precise to 1 part per million, it would be very RARE in a test that ALL of those 6 significant digits prove useful. In your app, the measurements are presently only approximately correlated in time. And the gap of blind time between measurements will usually represent a much longer period of time than the measurement itself.
Analogy: suppose you had a 100 minute film at 25 frames/sec for a total of 150_000 frames. Now start selecting individual frames that are separated by some random # of frames between about 200 and 500. In the end, you may end up with a sequence of 400 frames in the correct order. Each individual frame is VERY accurate, but the collection of all of them can zip by in 16 seconds and not give you a much understanding about the movie.
What would usually work out much better is to sacrifice some accuracy in order to collect a greater quantity of frames. You trade off the instantaneous accuracy for the overall coherency.
Sorry, got on a roll...   Back to your question. My own preference is almost always to avoid consuming hardware resources when not truly necessary. I've been toying with counters for many years and have still never once deployed an app using a 2-counter frequency measurement. I do the 1-counter measurement and save the other counter(s) for other purposes.
If you've got an M-series board, the 80 MHz timebase allows you to measure a 500 kHz pulsetrain with a quantization error of only about 0.06% (1 part in 160). There's a pretty fair chance that whatever physical process emits that pulsetrain isn't appreciably more stable than that
-Kevin P.

Can you use Airdrop between two Macs witch the same Apple ID?

Hi everyone,
you can see my question above. I have a MacBook Pro and an iMac but airdrop doesn`t seem two work between those two. They both use Mountain Lion. Its an iMac late 2012 and the MacBook Pro Retina mid 2012. This means that from a technical standpoint this would have to work but it doesn`t, so I figuered that maybe it is because of the fact that I use the same Apple ID with both of them. Can anyone confirm this or am I doing something wrong?
Thank you in advance!!

It is not necessary that the computers connect through a Wi-Fi router or access point.
The following steps are only to exclude a possible third party device interference.
Turn off Wi-Fi router and or Access Point.
Check that iMac and MBP have their Wi-Fi turned on.
Select Finder, Go, AirDrop, wait a few seconds.
Can you see the other computer inside the AirDrop window?

Sharing the iweb website creation between two macs in the same house?

I have an imac. Just purchased a macbook for the wife that arrives tomorrow. She wants to be able to update our website using her imac (a website I've started and maintained on the imac).
My question is...is it possible to "sync" the iweb application or to otherwise let her have access to the same info I see on the imac so she may update the site as well from her own mac?
We are connected in the house via a wireless network.
Thanks.

Clayton ~ These links may help:
http://docs.info.apple.com/article.html?artnum=303045
http://iwebfaq.org/site/iWebTwocomputers.html
And click on the thumbnail to check out ChronoSync:

How to share apps on 2 Macs with the same Apple ID ?

Hi,
I got a new iMac (2013 - Mavericks), and I gave my old one (2010 - Lion) to my husband. I've downloaded some new games on the Apple Store with my Apple ID for my new Mac, and it works fine. But when my husband wants to install them on his Mac, when he types the password for my Apple ID, it doesn't work, it says "wrong user/password"...
It seems that once I've activated my Apple ID on my new Mac, it prevented the old one to use it ?? The Home Sharing is turned on, but apparently it only concerns iTunes (music, etc), but not the NEW apps from the App Store. Everything new on my Mac can't be shared with the old Mac.
What can I do ? We don't want to create a new Apple ID for my husband, because we don't want to lose what there is already on his old Mac (we use the same music, games, apps, etc).
Thanks for your help.

Welcome to the Apple community.
If we means 2, then you are best keeping seperate accounts. What you need to do is share photo stream albums with the other.

Using a Dell 2407WFP with two Macs at the same time?

Hi ... I have a Dell Ultrasharp 24" WFP display that I was using with my old G4. Connectivity isn't the issue ... it works beautifully on both the G4 and my new Mini. I've read that I can put the VGA cable on the G4 (no biggie -- it's what I was using before) and I have the DVI on the Mini.
What I want to know is: Can I (and is it wise to) have both machines running at the same time and toggle the display between the two or should I keep one machine off when the other is on? There is a button on the display for toggling between a variety of displays.
I've activated file sharing, etc. on the old box, but there are some things I still can't do unless I'm on the G4 desktop -- mostly my graphic apps. I've been holding off from swapping cables around, but now it's getting to the point that I need to get back on the G4 because of apps that I don't have on the Mini.
I haven't put the VGA cable back on the G4 yet. It seems like it -should- work -- I just need some verification that it will or won't futz up something. I think what I might be most concerned about is that the monitor isn't powerful enough to run both machines at the same time, but I could be wrong.
The info at the Dell site is somewhat dated.
TIA!

I use a KVM switch with a Dell monitor that has DVI and VGA inputs. I only route the K an M portions (keyboard and mouse) through the switch. The computers connect directly via VGA and DVI to the Monitor, and then I use the monitor's switch to make the video switch. Works fine. Don't worry about taxing the monitor.
I'd suggest buying the KVM switch from a vendor with easy return policies, since it can take a few tries to find a model you like.

How can I work with two images at the same time?

I have downloaded Photoshop Elements 10 and I can not find the buttons for Minimize or Reset for the image. If I rightclick the miniature those options are grey. If I open two images so I have two miniatures in the holder and then go to Windows and Images the option Show Overlapping is grey but I can show Side by side. Then I can only shut down the images.
Thanks for help
Bibbi

Open the Editor and on the menu bar click:
Edit à Preferences à General
Check the box “Allow Floating documents in Full Edit Mode” and click OK.

How do I see my two Macs on the same screen?

Similar Messages

Maybe you are looking for