How do I see the dates that the pictures were taken?*

How do I find the dates that each picture was taken? It would be like right clicking and seeing when the picture was taken or saved. I can't find this info anywhere.

Hi catswalk,
iPhoto is the photo app on a Mac. If you have Windows, it would be under My Photos, or Pictures - not sure exactly. But basically, the picture information is only available on a computer as a direct part of the photos. You should be syncing your iPhone to iTunes on a computer so that you can back up all of your stuff. If you have iCloud, that backs up some things, but not your entire photo library - only your Photo Stream and Camera Roll from your iPhone.
So, really, it depends on what type of computer you are syncing with.....
However, there is an App in the App Store called Photo Investigator. It is free, but the free version comes with ads. For .99 cents, you can remove the ads. Once it is installed, you can select any photo on your phone, and it will give you not only date and time, but a lot of other info that you may or may not care about.
There probably are other apps available to do what you are looking for as well....
Hope this helps!
Cheers,
GB

Similar Messages

Hallo My system runs slow. how can i reorganize the date, that the pc runs faster? In the window world i hade to delete some fils. how it work in the apple world?

Hallo My system runs slow. how can i reorganize the date, that the pc runs faster? In the window world i hade to delete some fils. how it work in the apple world?

See these:
Switching from Windows to Mac OS X,
Basic Tutorials on using a Mac,
Mac OS X keyboard shortcuts,
Anatomy of a Mac,
MacTips,
Switching to Mac Superguide, and
Switching to the Mac: The Missing Manual, Mountain Lion Edition.
Additionally, *Texas Mac Man* recommends:
Quick Assist,
Welcome to the Switch To A Mac Guides,
Take Control E-books, and
A guide for switching to a Mac.
Once you get familiar with the Mac, see:
Mac Maintenance Quick Assist,
Mac OS X speed FAQ,
Speeding up Macs,
How to Speed up Macs, ,
Macintosh OS X Routine Maintenance,
Essential Mac Maintenance: Get set up,
Essential Mac Maintenance: Rev up your routines,
Maintaining OS X,
Five Mac maintenance myths and
Myths of required versus not required maintenance for Mac OS X for information.

I'm a new mac user and need to program future email's. How can I do that? in outlook I can make a change in the date that the email will be sent. How I do that in mail?

i'm a new mac user and need to program future email's. How can I do that? in outlook I can make a change in the date that the email will be sent. How I do that in mail?

There isn't a way directly in Mail.
Here's what google says: http://www.google.com/search?client=safari&rls=en&q=mac+os+x+mail+delayed+send&i e=UTF-8&oe=UTF-8

U201CValid Tou201D date set before the date that the report is run u2013 print u201Cnullu201D.

Hi Experts
I had a requirement for the Query, when we executing the through slection screen we will be giving 0fiscyear "from and to" dates. the "Valid to" (0date) has to check the relation of the Client partner and contract of relationship, if it is within the current date it should dipslay the report with values , if it is out of current date, it should display in the report as "null".
Logic : This report is based on the u201CClient Partneru201D and the u201CContact ofu201D relationship. If any of these relationships have a u201CValid Tou201D
date set before the date that the report is run u2013 print u201Cnullu201D.
Could anyone of you provide the inputs on this.
Thanks in advance
Thanks
Sekhar.P

IvanLevo wrote:
Could not find the /Library/Startup Items.
Good, it shouldn't be there.
For your Dock problem,
Go to your Finder "Go" menu choose "Go to Folder" and enter ~/Library/Preferences. Then delete these files then restart or log out and back in.
com.apple.Finder.plist
com.apple.dock.plist
com.apple.dock.db
com.apple.dock.extra.plist
Let us know

How to capture the data that the user modified in SM30(Maintenance view)

Hello experts,
I have a new requirement wherein when the user modifies a particular record in SM30(maintenance view)
it would also update that certain records in another table. For example, I modified the address
of record 1 in table1 so I need to automatically update that same record in table2. Help would be greatly appreciated.
Again, thank you guys and have a nice day!

Hi again,
1. But how can I capture the data that was modified
Yes, u are right.
We will have to use the event,
'BEFORE SAVING'.
2. In that,
u must fire a select query,
   from the same table,
   for the same record.
3. In this, u will get the OLD DATA (which was already saved),
4. Using this,u can compare,
   (either thru LOOP, or field by field)
to know, which field value has been changed.
regards,
amit m.

Can I find out the date that a video was taken?

I am wanting to put all my videos from my iphone of my daughters first years onto a DVD, I would like to mark the dates for each one. How do I find out what the dates of each video or picture are?

Thanks so much for your reply King_Penguin. No, sadly there is not indication of the expected release date on the film, it's no where to be found. I have also tried to look in other places online, but no luck. I guess your latter statement jives more with my situation, that being the studio/rights-holder hasn't feel inclined to provide the date.

How can you see a date on a picture

When you take pictures how can you go back to see what date you took them

Not in the Photo app. You can after you import the photo to your computer. I have not checked to see if there are any apps allow you to view the date. Photoshop Express does not.

How can I export the data that consultant have configured?

I have installed the same systems at two server machine. The consultant have configured something in one server and the developers have developed some projects at the same server, after that, I want to export the data that the consultants configured without the developed projects and import it to another server. How?

Certain objects can be put into an application designer project, and then exported to file or migrated to another environment. Examples include process scheduler server definitions, integration broken setup, security, and trees. Basically anything you can add through application designer using the Insert > Definitions into Project list. This is the better way but doesn't work for everything.
Do you know specifically what was configured and what you need to export? There's a DMS script that lives under PS_HOME/script called mvprdexp.dms that lists the core PeopleTools tables, which might be useful if you do have write your own DMS.

Why, as of last night, do I keep getting the message that the security certificate is not valid on sites I use all the time, like my hotmail account, paypal, facebook, etc?

I even got that message when I tried to post my question! It says that Firefox cannot verify a secure connection with mozilla, or whatever website I'm trying to visit, because the security certificate is not valid. It even gives the dates that the certificate will be valid, and the date shows that it is valid. So frustrating!! I have to "override" Firefox every time.

I have the same problem but I've corrected the time on my windows clock and I still got the same problem. Do you know if there's anything else I can do?

HT201272 How do i see a list of the apps that have been downloaded and the dates and times and amounts? Tried to follow the on-line thing but i want to compare what has been downloaded with my visa bill. HELP!!

How do i see a list of the apps that have been downloaded and the dates and times and amounts? Tried to follow the on-line thing but i want to compare what has been downloaded with my visa bill. HELP!!

See this -> http://support.apple.com/kb/HT2727

How can I display the front panel of the dinamically loaded VI on the cliente computer, the VI dinamically loaded contains files, I want to see the files that the server machine has, in the client machine

I can successfully view and control a VI remotly. However, the remote VI dinamically loads another VI, this VI loaded dinamically is a VI that allows open others VIs, I want to see the files that contains the server machine, in the client machine, but the front panel of the dinamic VI appears only on the server and not on the client, How can I display the fron panel with the files of the server machine of the dinamically loaded VI on the client computer?
Attachments:
micliente.llb ‏183 KB
miservidor.llb ‏186 KB
rdsubvis.llb ‏214 KB

I down loaded your files but could use some instructions on what needs run.
It seems that you are so close yet so far. You need to get the data on the server machine over to the client. I generally do this by doing a call by reference (on the client machine) of a VI that is served by the server. THe VI that executes on the server should pass the data you want to diplay via one of its output terminals. You can simply wire from this terminal (back on the client again) to an indicator of your choosing.
Now theorectically, I do not think that there is anything that prevents use from getting the control refnum of the actual indicator (on the server) of the indicator that has the data, and read its "Value" using a property node. I have never tried this idea but it seems t
hat all of the parts are there. You will need to know the name of the VI that holds the data as well as the indicator's name. You will also have to serve all VI's. This is not a good idea.
Ben
Ben Rayner
I am currently active on.. MainStream Preppers
Rayner's Ridge is under construction

I cant seem to download and install the latest iphone software update. I have tried since the release and have been unsuccessful on more than 7 occasions and lost all the data on the process. Anyone have that problem an how do I fix this problem?

I cant seem to download and install the latest iphone software update. I have tried since the release and have been unsuccessful on more than 7 occasions and lost all the data on the process. Anyone have that problem an how do I fix this problem?

Hi
Thanks but I have tried doing the above - when I said 7 times I was modest, its more like 15 times.
And I am referring to the 5.1 software update. I dont have wifi so I guess I will have to try that seeing that my husband also has the same problem - he has also tried downloading several times. It always times out en says that the connection is lost but yet there are always an internet connection and a decent signal once it stopped. Think it said error 32052 or something!
I am disappointed because the update includes inprovement on the battery life - did you guys notice any difference?

I'm doing a scan around a line by sampling data 360 degrees for every value of z(z is the position on the line). So, that mean I have a double for-loop where I collect the data. The problem comes when I try to plot the data. How should I do?

I'm doing a scan around a line by sampling data 360 degrees for every value of z(z is the position on the line). So, that mean I have a double for-loop where I collect the data. The problem comes when I try to plot the data. How should I do?

Jonas,
I think what you want is a 3D plot of a cylinder. I have attached an example using a parametric 3D plot.
You will probably want to duplicate the points for the first theta value to close the cylinder. I'm not sure what properties of the graph can be manipulated to make it easier to see.
Bruce
Bruce Ammons
Ammons Engineering
Attachments:
Cylinder_Plot_3D.vi ‏76 KB

How can I see website data from itouch 4th generation? My 8 yr old may have been on inappropriate sites and I need to see the data from website data stored on the itouch.

How can I see website data from itouch 4th generation? My 8 yr old may have been on inappropriate sites and I need to see the data from website data stored on the itouch.

There is no way to see where he has been.
Go into Settings > General > Restrictions > Safari and turn it off. Then add the MacGruff browser from the app store. After that go back to Restrictions and turn off the ability to add apps.

I recently got the iPhone 4s, but my iPod has a lot of apps with a lot of data on them and don't want to start over. I already synced my iPhone from the computer that had all my apps from my iPod, how do i transfer the data over, the other apps did.

I recently got the iPhone 4s, but my iPod has a lot of apps with a lot of data on them and don't want to start over. I already synced my iPhone from the computer that had all my apps from my iPod, how do i transfer the data over, the other apps did. But some reason the app Clash Of Clans did not. Thank you.

If I wiped my phone I wouldn't have the contacts on my phone to send to my self. I would need to take just the contacts from my back up. I would have to do this through iTunes and I don't see how I can just extract the contacts only from my back up. From what I can figure out it is all or nothing

How do I see the dates that the pictures were taken?*

Similar Messages

Maybe you are looking for