How do I see the duration of a clip in the timeline ?

Hi there,
How do I see the duration of a clip in the timeline ?
How do I change the duration by typing in a number (instead of dragging its ends) ?
Thanks

Tom Wolsky wrote:
Select the clip. The display at the bottom of the timeline window will tell you the clips duration.
Control-D will open the duration display in the dashboard.
Control-D is the same as right click & select "Change Duration" ?
But where is the dashboard ? Nothing pops out ! (ie no new windows appear)
Any ideas ?

Similar Messages

How do I see every frame of a clip on the timeline in Premier ?

There are of course times when I need to see every frame of a clip to synchronize two clips. Imagine for example that you have a two camera shoot and both cameras were looking at a clapstick, or at a strobe. I want to put both clips on the timeline and zoom in to see every frame. Now I can align the two clips fo that one specific frame of each clip is over/under each other. However, when I have zoomed into the timeline it seems I can never zoom quite enough to see every frame What do I do to be able to zoome all the way in to the timeline so I can see every frame of the clips ? I haven't actually tried this yet with CC, but did with CS6 and it wouldn't do it.

I'm not knocking the idea of using the program monitor to place markers on sync points and using that to synchronize clips. It should be a very good solution.
What I am saying is that there are times when it would be advantageous to be able to see every frame of multiple clips on the timeline. When i first tried to do that I zoomed in and it looked as if it would display all the frames. I was dissappointed to find it wouldn't. As an editor who has done a lot of resynchronizing multiple camera shoots where there is no intentional visual sync cue, i can tell you it can be a big help to be able to see the frames as if we had a strip of film on each timeline. Sometimes we need to see several frames of each clip at the same time to make a decision about which frame represents the sync point, or to make the quickest possible decision about where to start and end a dissolve, or to chose which camera to use. In a scene shot with only one camera, there is no actual sync point. The action may have progressed slightly differently between shots. Being able to see 10 or 15 frames from each shot can help to make the quickest decision about how to line up the shots and where to do the transition. Would anyone out there say it would be a bad thing if Premier Pro could display every frame when we zoom all the way in ? It seems to me that it could only help. So i request Adobe consider it as a possible future improvement.
Here is an example, the last time i tried to see every frame in Premier. I had a scene I used Maya to create, series of Tiffs. This scene shows an object appearing as if arriving through a time or dimensional portal. The scene includes plasma popping and flashing. There are two different shots of the same moment in time. The shots are frame numbered. So if I could see the frame numbers from the original tiffs on the timeline I could align the shots that way. But of course I lose the frame numbers. The overall scene is too long, and rendering time too long, especially for 3-D 1080, to render each shot from the beginning of the scene, which would make synchronizing very easy. So i needed to sync to the flashing plasma in the scene. I though I had the shots lined up using a flash. It turned out they were not the same flash. So if i did a slow dissolve between shots, the flashes form each shot would not line up in time. What I needed to do is line up several flashes happening over a couple of seconds, so I coud verify the flashes were the same flashes. There are different numbers of frames between each flash, so if I got three to line up they would have to be the same flashes. I spent a lot of time trying to get these shots lined up. If I could zoom into the time line and see evry frame I could synchronize several clips by lining up the flashes, in just a couple of minutes. To do this with markers, marking say five flashes from each of four shots, it would take several minutes to do it before being ready to do the synchronizing. It's a workable solution, but is not ideal, a compromise.

Any way to change the duration of multiple clips in the timeline at once?

Title says it all
Thanks

Can you manually drag back and forth with the handles on the timeline? Appreciate it.

How can I change the duration for all clips in iMovie 10.2

How can I change the duration for all clips in iMovie 10.2? I'm used to working in the older version of iMovie where all I had to do was click on the gear on the clip and change the duration. ALso could use the tool bar to set the duration for all clips. Can't figure out how to do that in this new version. Any suggestions would be appreciated.

In the timeline select the clip whose duration you want to change. Click the adjust button at the top of the viewer and then click the i button and you can set the duration. For multiple clips select them all and in the i button type in the duration you want and it will be applied to all the selected clips. You can also change the duration of a clip in the timeline by putting the cursor over the beginning or end of a clip and dragging. A popup will show the new duration.

How can I see my reminders in my Mac in the same way I see them in my iPad and iPhone

How can I see my reminders in my Mac in the same way I see them in my iPad and iPhone, I is easier to work with reminders in Ipad and Iphone rather to see them like a list on ICal

The calendar seems to be the only way to see reminders right now. I'm aware of no 3rd party program that deals with just reminders...but I'd like to find one.

How do I find out the duration of a clip?

How do I find out the exact duration of a clip?
The only way I can do at the moment is to move the mouse to the edge of the clip
This is anoying and fiddly
Is there a better way?
Thanks
Omar

Sure it is
One selected 6:28. Best thing is it will total up multiple selections.

HT1879 How can I see track duration in itunes store before buying tunes on my iPhone 4?

Is there any way to see track durations (length of songs) in the iTunes store? I'm using an iPhone 4.

The only way I have done a work around, is to preview the song (make it play)
Then press the lock button
When the phone is locked it should still be playing press either the back button or the lock button and the full song title will appear

How do you see what bitrate your music is on the latest iTunes?

How do you see what bitrate your music is on the latest iTunes?

select
Music
Above the first song there are colums you can customize , select bitrate from that menu
tap two fingers on the trackpad will open up the menu to customize after moving the pointer to that field

When I adjust the duration of a clip or transaction, iMovie automatically adjusts the duration of another clip; how can I shut this feature off?

In iMovie when I adjust the duration of a photo clip or transaction, iMovie automatically changes the duration of another clip; how can I shut this feature off?

Ok, well you won't get a "speed scale" indicator when editing a title clip. You can only adjust duration. Now, is there music attached to the title clip? Are you adjusting the TITLE TEXT box ONLY? Try adjusting the clip BELOW Title Text box 1st, then Title Text clip. Is the Title attached to your own video OR is it one of iMovie's default Titles??

How do i see i messgaes on another phone on the account

how do i see i messages on another phone on the account?

What are you asking? The only kind of messages that you might be able to see on your phone for another phone on your account is if you are both using the same iCloud account and you could possibly see the iMessages depending on the settings. You will never see SMS messages. What are you trying to do?

Changing the Duration of multiple clips/Gee I thought I knew how?!

Okay folks. I have a group of pictures on the timelime. I need to shorten the duration of all clips. I highlighted the clips, control+click on one of the clips--navigated to duration.
When I change the duration, the computer beeps and returns the time to the orginal clip length of 10:00. I can change an individual clip in this manner but not the whole timeline.
Any ideas?
Thanks for the help.

Never Mind. I had a sequence in my list of clips. Took it out and that solved the problem. Sorry.
Thanks anyway.

Hi i am currently editing clips in premiere pro cc but everytime i go to change the speed not the duration of a clip it will not let me select it - also when i go to effect controls it will not let me select time mapping? please help

Hi i am currently editing clips in premiere pro cc but everytime i go to change the speed not the duration of a clip it will not let me select it - also when i go to effect controls it will not let me select time mapping? please help

savannahp
What version of Premiere Elements and on what computer operating system?
Please review the following that I excerpted from an older post here regarding Adobe's PRE_help comments about Hollywood Effect and mention of
Red Noir. Does any of the following apply to any of what is happening to you.
- Whenever I try to add an effect from the Hollywood Looks menu, it brings up a warning that all my previous effects on that clip will be deleted. However it will let me add those same effects *after* applying Hollywood Looks.
This is because of how the Hollywood Looks are designed to be used. Since these are effect presets (multiple effects in combination) that result in a specific "look"; they are best applied in isolation. If any previous effect is applied and we still allow a Hollywood effect to be applied, we will not be able to see what the effect does clearly. For e.g. if you already have a Gaussian Blur effect applied to your clip, and then we allow you to apply the "Red Noir" Hollywood effect, the fact that the "Reds" in the scenes will be highlighted and the others converted to B/W will not be clearly seen since the content is already blurred out. So any previously applied effects was designed to be removed. This holds good even if you apply a Hollywood look "on top of" another one. The previous one will be replaced. Having said that, you can customize the look further by either tweaking an already applied filter or by adding a newer effect on top. That is the reason you can apply an effect on top of the Hollywood Effects and not vice versa.
Please review and consider and then we can proceed from there if necessary.
ATR

How can i hold a spot in a clip, let the audio continue for a moment and then resume the clip and audio together?

how can i hold a spot in a clip, let the audio continue for a moment and then resume the clip and audio together?

you want to use the retiming tool. you can select what you want to hold, then use the "Hold" command (shift-H) to create a single frame of a default duration, which you can then change to whatever length you want by dragging the retiming handle.
Here's the page in the help manual that describes the hold feature in detail:
http://help.apple.com/finalcutpro/mac/10.0/#ver4c2173c9

Motion 4 is there a limit to the duration of a clip imported to M4

Is there a limit to the duration of a clip imported in Motion 4. My clip is being cut short a few seconds. ??????????????

I'm sure there is a limit, but I've never encountered it and as a practical matter, it should be a non issue. (Of course, if the project has a ton of layers and effects, you might tie even the beefiest computer into knots for a very long time.)
But to your question, if you are importing directly into Motion (in contrast to Send to Motion in FCP), and you're missing the tail of the clip, I'd first look at the project properties to see whether duration is long enough. Also see whether there is any black at the beginning in case the playhead was advanced beyond the start when the clip was added to the project.
Russ

How do I use just the audio from a clip without the video?

Can't remember how to use just the audio from a clip, without the video. FCP X can't select like FCP&

Edit just the audio into the timline.
The disclosure triangle next to the edit buttons.

How do I see the duration of a clip in the timeline ?

Similar Messages

Maybe you are looking for