How do I see the number of e-mails in my inbox using the standard mail app?
Hi,
Before ios7 I used to be able to see how many e-mails were in my inbox for each synced account. Now this information doesn't appear like it used to. It is very frustrating for me as I used to use this as a tool to prompt a tidy up of my inbox for each account. When the number started to increase above 50 I would delete rubbish ones and sort ones to keep into other folders. Does anybody know anything about the reasons behind this or if you can turn the function back on?
Basically I would go to my inbox and start scrolling through my inbox and the top of each mail item it would say something like '3 of 52' '4 of 52' and so on...
Any help would be much appreciated, thanks.
Delete them from your inbox.
Similar Messages
-
How can I see the previously purchased Apps after changing region?
I recently changed the the region of my Apple ID and now none of the previously purchased apps are showing up in Purchased info even if I delete and download them again. Before I changed the region I downloaded the free app called Constellation on my iPad, but upgraded it to Pro after changing region. Now when I installed it to my iPhone, it doesn't have the Pro license and asks me to buy it again.
once you connect the new iPhone, iTunes should ask you if you want to restore the backup of your old one. you can also redownload your purchased app over and over free of charge: How to redownload purchased apps from the App Store
-
How do I see the number of albums that I have import to my Itunes?
How do I see the number of albums that I have import to my Itunes?
In the earlier version of Itunes I could see the number of albums, categories etc. that I have in my Itunes. How do I see the same info in Itunes 7.1.1?
Best KudskGo to View>Show Browser and switch on the browser pane. At the top of the three categories Genre, Artist and Album you'll see "All" and the totals in brackets.
-
Hii, Hii, Hii how can i see the number of sms i had sent from iphone5
Hii, Hii, Hii how can i see the number of sms i had sent from iphone5????
Log into your carriers web site to check or use app for that carrier. The total count will be there.
An example: for Verizon https://itunes.apple.com/us/app/my-verizon-mobile/id416023011?mt=8 -
When attempting to sync my iPhone 4s with the new iTunes 11 i get an error message " cannot sync as need more disc space" however the usage bar on the iphone shows space enough; how can you see the total volume of libraries such as music and films in the new iTunes?
It may be the disc space on your computer, not the phone. In itunes if you click on music, movies, apps, etc it shows the total usage at the bottom of the screen. Good luck.
-
How can i see the posts that i answered?
How can i see the posts that i answered?
Actually i some others post for a VLAN.. now i need that post ... but i'm unable to find it...
Can someone please help me in this ?
Regards,
ChanduI probably do not fully understand your question. Based on what I think I understand I offer these suggestions:
- if you click on your profile, or using the account link on a forum page select profile, then at the bottom of the information of your profile is a list of the responses that you have made. But it displays a limited number of responses.
- if you use the search feature of the community you might find it by searching on your name, or better to search for some term that was used in the response.
HTH
Rick -
In ST03 , how can i see the Query name, user id,how many times executed the
HI Experts,
In ST03 , how can i see the Query name, user id,how many times executed the query.
these details how do i get from the above transaction.
EX:-if there is one report name X,I want to know how many users had executed X report today,weekly,monthly.
ex:-query userid total number of execution
sales order 0000555 5 times
custmer 05855 2 times
fast reply will be appreciated,Hi,
Look here:
http://help.sap.com/saphelp_nw04/helpdata/en/3b/54df4204892a78e10000000a155106/frameset.htm
Also check these:
http://help.sap.com/saphelp_nw2004s/helpdata/en/2d/b8be3befaefc75e10000000a114084/content.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/25/ece73a39e74d27e10000000a114084/frameset.htm
Hope this helps..
Bye
Dinesh -
How can I see the alpha channel in the channels palette?
Hello, mi format plugin loads a rgba image. I see it with transparency, that's ok, but when I go to the channels tab I only see 4 items (RGB, Red, Green and Blue).
How can I see the alpha channel of my file in the channel tab?
Thanks!OK, something must be wrong... but I don't find it!
That's my whole code (resumed). I ommit some code (saving file code (not used) or main function, where I only call te "DoSomething" functions. You can see that I use layers. The DoReadContinue function is only used to show the preview.
In the DoReadStart function I set the parameters for the layers (and the preview), and I fill the "data" and "layerName" params in the DoReadLayerContinue function. I hope you can understand the code!
const int32 IMAGE_DEPTH = 32;
SPBasicSuite * sSPBasic = NULL;
SPPluginRef gPluginRef = NULL;
FormatRecord * gFormatRecord = NULL;
intptr_t * gMxiInfoHandle = NULL;
MXIInfo* gMxiInfo = NULL;
int16 * gResult = NULL;
#define gCountResources gFormatRecord->resourceProcs->countProc
#define gGetResources gFormatRecord->resourceProcs->getProc
#define gAddResource gFormatRecord->resourceProcs->addProc
CmaxwellMXI* cMax;
static void DoReadPrepare (void){
gFormatRecord->maxData = 0;
static void DoReadStart(void){
char header[2];
ReadScriptParamsOnRead (); // override params here
if (*gResult != noErr) return;
// Read the file header
*gResult = SetFPos (gFormatRecord->dataFork, fsFromStart, 0);
if (*gResult != noErr) return;
ReadSome (sizeof( header ) * 2, &header);
if (*gResult != noErr) return;
// Check the magic number for avoid no-mxi files
int headerID = CheckIdentifier (header);
if( headerID != HEADER_MXI ) *gResult = formatCannotRead;
if (*gResult != noErr) return;
// The file is OK. Let's continue to obtain the data of the image.
cMax = new CmaxwellMXI( 0 );
strlen((char*)gFormatRecord->fileSpec->name);
gMxiInfo->filename = _strdup((char *)gFormatRecord->fileSpec->name + 1);
bool res = cMax->getMXIIInfo(
(const char*)gMxiInfo->filename,
gMxiInfo->width, gMxiInfo->height,
gMxiInfo->burn, gMxiInfo->monitorGamma, gMxiInfo->iso,
gMxiInfo->shutter, gMxiInfo->fStop, gMxiInfo->intensity,
gMxiInfo->scattering,
gMxiInfo->nMultilightChannels, gMxiInfo->lightNamesList,
gMxiInfo->availableBuffersMask,
gMxiInfo->widthPreview, gMxiInfo->heightPreview,
gMxiInfo->bufferPreview);
if(!res) return;
// Check the available extra buffers
int count = 0;
if( gMxiInfo->availableBuffersMask & CmaxwellMXI::ALPHA_BUFFER ){
// We will use that string to obtain later the desired extra buffer.
gMxiInfo->extraBuffersList[count] = "ALPHA";
gMxiInfo->hasAlpha = true;
count++;
else{
gMxiInfo->hasAlpha = false;
gMxiInfo->nExtraBuffers = count;
switch( IMAGE_DEPTH ){
case 8:
gMxiInfo->mode = plugInModeRGBColor;
break;
case 16:
gMxiInfo->mode = plugInModeRGB48;
break;
case 32:
gMxiInfo->mode = plugInModeRGB48; //96 gives me an error
break;
// SET UP THE DOCUMENT BASIC PARAMETERS.
VPoint imageSize;
if( gFormatRecord->openForPreview ){
// Preview always RGB8.
imageSize.v = gMxiInfo->heightPreview;
imageSize.h = gMxiInfo->widthPreview;
gFormatRecord->depth = 8;
gFormatRecord->imageMode = plugInModeRGBColor;
gFormatRecord->planes = 3;
gFormatRecord->loPlane = 0;
gFormatRecord->hiPlane = 2;
gFormatRecord->colBytes = 3;
gFormatRecord->rowBytes = imageSize.h * gFormatRecord->planes;
gFormatRecord->planeBytes = 1;
else{
// Configure the layers. All RGBA32.
imageSize.v = gMxiInfo->height;
imageSize.h = gMxiInfo->width;
gFormatRecord->depth = IMAGE_DEPTH;
gFormatRecord->imageMode = gMxiInfo->mode;
gFormatRecord->layerData =
2 + gMxiInfo->nMultilightChannels + gMxiInfo->nExtraBuffers;
gFormatRecord->planes = 4; // RGBA.
gFormatRecord->loPlane = 0;
gFormatRecord->hiPlane = 3;
gFormatRecord->planeBytes = IMAGE_DEPTH >> 3;
gFormatRecord->rowBytes = imageSize.h * gFormatRecord->planes * ( IMAGE_DEPTH >> 3 );
gFormatRecord->colBytes = gFormatRecord->planes * ( IMAGE_DEPTH >> 3 );
gFormatRecord->transparencyPlane = 3;
gFormatRecord->transparencyMatting = 1;
gFormatRecord->blendMode = PIBlendLinearDodge;
gFormatRecord->isVisible = true;
SetFormatImageSize(imageSize);
gFormatRecord->imageHRes = FixRatio(72, 1);
gFormatRecord->imageVRes = FixRatio(72, 1);
VRect theRect;
theRect.left = 0;
theRect.right = imageSize.h;
theRect.top = 0;
theRect.bottom = imageSize.v;
SetFormatTheRect(theRect);
// No resources for now.
if (sPSHandle->New != NULL) gFormatRecord->imageRsrcData = sPSHandle->New(0);
gFormatRecord->imageRsrcSize = 0;
return;
/// Called for prewiew only.
static void DoReadContinue (void){
// Dispose of the image resource data if it exists.
DisposeImageResources ();
if( gFormatRecord->openForPreview ){
VPoint imageSize = GetFormatImageSize();
gFormatRecord->data = gMxiInfo->bufferPreview;
if (*gResult == noErr) *gResult = gFormatRecord->advanceState();
if( gFormatRecord->data != NULL ){
delete[] (Crgb8*)gMxiInfo->bufferPreview;
gMxiInfo->bufferPreview = NULL;
gFormatRecord->data = NULL;
// De momento nos olvidamos de los icc profiles [TODO]
//DoReadICCProfile ();
static void DoReadFinish (void)
// Dispose of the image resource data if it exists.
DisposeImageResources ();
WriteScriptParamsOnRead (); // should be different for read/write
// write a history comment
AddComment ();
// Clean some memory.
if( gMxiInfo->lightNamesList != NULL ){
for( unsigned int i = 0; i < gMxiInfo->nMultilightChannels; i++){
if( gMxiInfo->lightNamesList[i] != NULL ){
delete[] gMxiInfo->lightNamesList[i];
gMxiInfo->lightNamesList[i] = NULL;
delete[] gMxiInfo->lightNamesList;
gMxiInfo->lightNamesList = NULL;
if( gMxiInfo->bufferPreview != NULL ){
delete[] gMxiInfo->bufferPreview;
gMxiInfo->bufferPreview = NULL;
if( gMxiInfo->filename != NULL ){
delete[] gMxiInfo->filename;
gMxiInfo->filename = NULL;
if( cMax != NULL ){
delete cMax;
cMax = NULL;
static void DoReadLayerStart(void){
// empty
static void DoReadLayerContinue (void){
int32 done;
int32 total;
VPoint imageSize = GetFormatImageSize();
// Set the progress bar data
done = gFormatRecord->layerData + 1;
total = gMxiInfo->nMultilightChannels + gMxiInfo->nExtraBuffers + 2;
// Dispose of the image resource data if it exists.
DisposeImageResources ();
uint32 bufferSize = imageSize.v * gFormatRecord->rowBytes;
int nPixels = gMxiInfo->width * gMxiInfo->height;
char* lightName = NULL;
// SET THE BLACK BACKGROUND
if( gFormatRecord->layerData == 0 ){
gFormatRecord->data = (void*)new byte[bufferSize];
for( int i = 0; i < nPixels; i++ ){
((float*)gFormatRecord->data)[ i * 4 ] =
((float*)gFormatRecord->data)[ i * 4 + 1 ] =
((float*)gFormatRecord->data)[ i * 4 + 2 ] = 0.0;
((float*)gFormatRecord->data)[ i * 4 + 3 ] = 1.0;
// Set the layer name.
gFormatRecord->layerName = new uint16[64];
gFormatRecord->layerName[0] = 'B';
gFormatRecord->layerName[1] = 'a';
gFormatRecord->layerName[2] = 'c';
gFormatRecord->layerName[3] = 'k';
gFormatRecord->layerName[4] = 'g';
gFormatRecord->layerName[5] = 'r';
gFormatRecord->layerName[6] = 'o';
gFormatRecord->layerName[7] = 'u';
gFormatRecord->layerName[8] = 'n';
gFormatRecord->layerName[9] = 'd';
gFormatRecord->layerName[10] = '\0';
// LOAD THE LIGHT LAYERS
else if( gFormatRecord->layerData < gMxiInfo->nMultilightChannels + 1 ){
void* lightBuffer = NULL;
void* alphaBuffer = NULL;
byte foob;
dword food;
// Get the light buffer.
bool res = cMax->getLightBuffer(
(char*)gMxiInfo->filename,
gFormatRecord->layerData - 1, IMAGE_DEPTH,
lightBuffer,
gMxiInfo->width, gMxiInfo->height, lightName);
if(!res){
*gResult = readErr;
return;
if( gMxiInfo->hasAlpha ){
// Get the alpha buffer.
res = cMax->getExtraBuffer(
(char*)gMxiInfo->filename,
"ALPHA", IMAGE_DEPTH, alphaBuffer,
food, food, foob);
if(!res){
*gResult = readErr;
return;
else{
alphaBuffer = (void*)new float[ gMxiInfo->width * gMxiInfo->height * 3 ];
for( int i = 0; i < nPixels; i++ ){
// Only need to set the red channel.
((float*)alphaBuffer)[ i * 3 ] = 1.0;
// Put them together.
gFormatRecord->data = (void*)new byte[bufferSize];
for( int i = 0; i < nPixels; i++ ){
((float*)gFormatRecord->data)[ i * 4 ] = ((float*)lightBuffer)[ i * 3 ];
((float*)gFormatRecord->data)[ i * 4 + 1 ] = ((float*)lightBuffer)[ i * 3 + 1 ];
((float*)gFormatRecord->data)[ i * 4 + 2 ] = ((float*)lightBuffer)[ i * 3 + 2 ];
((float*)gFormatRecord->data)[ i * 4 + 3 ] = ((float*)alphaBuffer)[ i * 3 ];
delete[] (float*)lightBuffer;
delete[] (float*)alphaBuffer;
// Set the layer name.
//LOAD THE EXTRA CHANNELS
if( ... ){
//READ THE RENDER BUFFER
if( ... ){
// User can abort.
if (gFormatRecord->abortProc()){
*gResult = userCanceledErr;
return;
// Commit the layer.
if (*gResult == noErr) *gResult = gFormatRecord->advanceState();
// Update the progress bar.
(*gFormatRecord->progressProc)( done, total );
// Free memory.
if( gFormatRecord->data != NULL ){
delete[] (float*)gFormatRecord->data;
gFormatRecord->data = NULL;
if( lightName != NULL ){
delete[] lightName;
lightName = NULL;
static void DoReadLayerFinish (void)
// Nothing to do.
And that's the image that I obtain loading a 8 layer image:
The layers have transparency (when I set "transparencyPlane" to -1, or 0, or 1, or 2, or 3, or 4....., I got the same result!). The blending mode is still "normal". I had set it to "linear dodge" The "isVisible" param works OK.
Alpha 1 is still black.
Is possible that I need to set something in the .r file? I had to add "FormatLayerSupport { doesSupportFormatLayers }," to manage layers, for instance. -
How do I see the Kernel patch level in Java ONLY instance?
Could someone please tell me How do I see the Kernel patch level in a Java ONLY instance?
In Abap, it is simple!
In Java I see in the System Info: Kernel Version: 7.00 PatchLevel 108458.44
BUT that doesn't correspond to the real patch level which I can see when I do disp+work which gave me 111Hello Yechezkel,
I am not sure whether the patch number you are looking for is available.
Typically you can use "-v" to display the patch level of SAP kernel programs. When I run "jcontrol -v" or "jlaunch -v", the patch number is blank (at least on the 6.40 release I checked)
The SP level should be able to tell how current the Java instance is updated, especially for NetWeaver 7 systems always patched with JSPM stack.
Best regards,
Victor -
How can i see what number and time a text message i received a text message
how can i see what number and at what time i received a text message online
If you are on a regular postpaid account, you can log in to your My Verizon account and see the usage details for your account.
-
How do i see the rest of the posts to my Q
Hi,
I have 20 on the view column for "I want my Avatar"but I can only see 4 or so how do I see the rest of what I beleive to be replies to my Q.
Thank you .
EmeHi Eme,
The 20 in the view column is the number of times your post has been viewed by others - I think what you are referring to is the replies column next to it which tells you how many have replied to you post.
Confusing, isn't it?
Regards,
Colin R. -
How do I see the duration of a clip in the timeline ?
Hi there,
How do I see the duration of a clip in the timeline ?
How do I change the duration by typing in a number (instead of dragging its ends) ?
ThanksTom Wolsky wrote:
Select the clip. The display at the bottom of the timeline window will tell you the clips duration.
Control-D will open the duration display in the dashboard.
Control-D is the same as right click & select "Change Duration" ?
But where is the dashboard ? Nothing pops out ! (ie no new windows appear)
Any ideas ? -
How do i see the whole mac address for my iphone 5C?
The Wi-Fi (MAC) address show in Setting>General>About only shows 4 pairs with ... after the 4th pair. How do I see the last two pairs? Touching the ... or anything else on the screen doesn't help.
This is my friends iPhone and though I checked all of his settings I don't see anything turned on or checked that would make the fonts larger than normal.
I checked this because my iPhone 6 doesn't have this problem.
I was able to find a solution on another sight though. It was suggested that if the entire MAC address didn't show to just touch and hold the visible number until 'copy' shows. After copying the number just paste it into a text message field and the entire number then shows up. Viola!
Its a shame that I had to spend so much time researching this to find it on a non-Apple sight to get this simple answer to a very frustrating glitch. -
How do I "see" the AF point I choose with a Nikon D700/D3?
How do I "see" the AF point I choose with a Nikon D700/D3?
I hear a D3s and LR3.3 can see it.
AND, how do I turn it ON/OFF ?
HGI was told by a D3s user that in LRv3.3 AF point used is shown
Seem to remember for some earlier version of LR my e510 or e30 AF points was being shown.
My guess is you would only start looking at the AF points used ... when a Lens or body starts acting differently. or when it is not working as well as other gear you are using.
As my only RAW software used ... I would like it to READ what is there in the Exif.
at least
AF distance (which was there in LRv2)
Shutter count (there in PS CS5)
and AF point used ... there in Aperture 3 ... and Nikon software.
Because LR s/b a PRO workflow software ... support for the Current PRO cameras should be expected ... and that number is far LESS.
and for Nikon users it is D700/D3 series. basically two cameras ... because my guess is the different flavors D3/D3s/D3x of the one body , the reading of the AF point sb simular.
HG -
How do i see the amount of people who listen to my podcast?
How do i see the amount of people who listen to my podcast?
I use Feedburner at http://www.feedburner.com to create all the podcast enclosures for my RSS feeds. In addition to that, they keep track of the circulation which I believe amounts to an approximate number of subscribers that listen to the podcast.
You can even have a little chicklet that you can put on your webpage so you can keep track of your stats without having to login to your feedburner account. You can see a sample of this chicklet on my son's video podcast page at: http://niotv.blogspot.com
I hear that libsyn.com also keeps detailed stats of how many listeners are listening to your podcast if libsyn is your podcast host.
15 Powerbook G4 Titanium Mac OS X (10.4.5) -
How i can see the Current Order documents
Hi Gurus,
can any body tell me how can i see the current order number documents? in T.Code - KONK i see that the number range status shows current order document number. but i cannt trace where it to see the document?
also i check the Order Actual Line Item & Plan Line Item at the time message arrise that Order doesnot exit.
but in KONK - the current number range status shows the order document number.
pls help me to overcome the problem.
Point will be rewarded
Than'x
DhananjayHi,
you are mistaking KONK with KANK. KONK ist the number range for internal order master data (i.e. order numbers). Please check this via AUFK. Line items have nothing to do with KONK.
Regards
Karl
Maybe you are looking for
-
After I unplug headphones, the speakers no longer work until rebooted. Anyone else experience this? Also had the same issue on the Droid Razr Maxx.
-
IDVD 5 Projects Destroyed by iDVD 2
By mistake I opened an iDVD 5 Project with iDVD 2. The project was immediately destroyed and the file which was originally several GB reduced to just 72KB. The file was destroyed even though I chose NOT to save it. Is this a known problem and can I r
-
How to create Custom LabVIEW Node with Dynamic Pins?
I am trying to create a new set of LabVIEW nodes that will communicate with a new protocol. If it's at all possible, I'd like to make the new nodes similar to other connnectivity nodes (i.e. ActiveX, .NET, etc...). There would be an Open Reference no
-
How or Can I update the image on my view of the topic icon? I wanted to change the icon that represents the topic in the TOC so I went to Project Setup and went to Skins and on the Default skin I right clicked and selected Edit. Then I went to the N
-
Action Script window will not open
I am unable to figure out how to maximize this window so that I can use the feature! It used to work before which is what is really strange about it, but now it is permanently minimized at the bottom of the screen, and clicking on it does nothing. Ha