How do I see the responses I made to emails on my iPad?

I Have an iPad 3. is there somewhere to see an email I've received and my answer to it? I can't always remember my response!

Hello Riverbabe,
To find what you replied with, add your Sent folder to your Favorites when looking at all the folders in the Mail app. Once you have it selected, look in the sent folder for the message and what you replied with. Take a look at the article below as it will have the information that you need to set that up.
See important messages
http://help.apple.com/ipad/8/#/iPad99a3ee0b
Make a favorite mailbox. Favorite mailboxes appear at the top of the Mailboxes list. To add a favorite, view the Mailboxes list, then tap Edit. Tap Add Mailbox, then select the mailbox to add. You’ll also get push notifications for your favorite mailboxes.
Regards,
-Norm G.

Similar Messages

How can I see the IP address of somone who used my iPad that was stolen to log into my app-store?

I recently fell victim to a theft of my iPad. Albeit it was an old one, it was mine.
Logging on to app-store with my iPhone, I have been prompted many times for "confirmation" of my password and for security questions. Clearly, someone has been trying to log on and has failed. My only guess is that they intend to keep the iPad and download music or whatever. But being prompted for security questions, leads me to suspect that somone has my apple ID but has been plugging away at passwords to buy stuff.
If I was able to locate the IP address (as the unit is only Wi-Fi), I can pass this onto the authorities and perhaps retreive the unit.
Is it possible to load a location app remotely from here and have it load up when the stolen unit is online again?
Many thanks y'all

Did you have 'find my iPhone' activated on it? Because if you go to iCloud.com you can log in there and you can remotely lock or wipe your device. From what I hear, the police won't do anything about going and fetching stolen iPads and iPhones, but if you have find my iphone/ipad/ipod/mac turned on then it will give you a map of where it is.
Just keep in mind that sometimes iTunes does ask you for your password regardless, and only a few weeks ago apple brought in security questions, so everyone had to fill in security questions for their iTunes account to make it more secure If all else fails, ring Apple cusomer support and they might be able to bar your account or something, however you may have to make a new account (the might be able to set it up so you have all your previous information on a new account)
Hope this helps!

How can I see the MAD results in my planning book

Hello Gurus:
I'm setting up some statistical models in APO DP and running some test data through them. How can I see the results of the MAD to verify if the models are calculating correctly? I was hoping I can see the monthly MAD values in a key figure in my planning book?
Does anyone know?
Andrea

Hello Andrea,
As far as I know, I don't think there's a standard key figure or macro could acheive this.
MAD or other errors in forecast are not saved as time series, so I don't know why you want to see them as time series.
You can see the forecast errors in forecast result screen, and if you push comparision button, you can see forecast errors for several last runs.
But I don't know how to put these value into planning book, unless you want to apply your own logic ...
Best Regards,
Ada

How to see the last updates made during Power Nap?

Hello guys,
I am using MacBook Pro with Retina Display with Power Nap turned on. I think it's a great feature, but I wouyld like more control — to be able to see the updates it has made while sleeping.
Is there any way to see the last updates made during Power Nap? Maybe some logs etc.

You can see updates installed via Software Update by clicking on the Apple > About this Mac > more info > System Report > scroll down to Software > Installations. That is a comprehensive list - you won't find a separate list of the last hour or whatever (that I know of). There might be a terminal command for that - or not - I don't know of one.
FWIW, I like to know what updates are being installed when, so I do not allow automatic download/installs of anything - I allow automatic checking so I get a notification that an update is available, but then I prefer to choose if/when I will download and install.

How can i see the posts that i answered?

How can i see the posts that i answered?
Actually i some others post for a VLAN.. now i need that post ... but i'm unable to find it...
Can someone please help me in this ?
Regards,
Chandu

I probably do not fully understand your question. Based on what I think I understand I offer these suggestions:
- if you click on your profile, or using the account link on a forum page select profile, then at the bottom of the information of your profile is a list of the responses that you have made. But it displays a limited number of responses.
- if you use the search feature of the community you might find it by searching on your name, or better to search for some term that was used in the response.
HTH
Rick

How we can see the abap memory data

How we can see the abap-memory data
fine the code below
import lsind
         report_title
         table_name
         report_field
         change_display
         show_hide
         conversion_exits
         table_description
         form_program
         select_form
         update_form
         line_size
         line_count
         records[]
         fields[]
         header_fields[]
         select_fields[]
         xrep[]
         from memory id 'LZUT5U11'.
Regards
santhosh
mail-id : [email protected]

Dear Santosh,
ABAP MEMORY:
A logical memory model illustrates how the main memory is distributed from the view of executable programs. A distinction is made here between external sessions and internal sessions .
An external session is usually linked to an R/3 window. You can create an external session by choosing System/Create session, or by entering /o in the command field. An external session is broken down further into internal sessions. Program data is only visible within an internal session. Each external session can include up to 20 internal sessions (stacks).
Every program you start runs in an internal session.
All "squares" with rounded "corners" displayed in the status diagram represent a set of data objects in the main memory.
The data in the main memory is only visible to the program concerned.
CALL TRANSACTION and SUBMIT AND RETURN open a new internal session that forms a new program context. The internal sessions in an external session form a memory stack. The new session is added to the top of the stack.
When a program has finished running, the top internal session in the stack is removed, and the calling program resumes processing.
The same occurs when the system processes a LEAVE PROGRAM statement.
LEAVE TO TRANSACTION removes all internal sessions from the stack and opens a new one containing the program context of the calling program.
The ABAP memory is initialized after the program is called. In other words, you cannot transfer any data to a program called with LEAVE TO TRANSACTION via the ABAP memory.
SUBMIT replaces the internal session of the program performing the call with the internal session of the program that has been called. The new internal session contains the program context of the called program with which it is performed.
When a function module is called, the following steps are executed:
A check is made to establish whether your program has called a function module of the same function group previously.
If this is not the case, the system loads the associated function group to the internal session of the calling program as an additional program group. This initializes its global data.
If your program used a function module of the same function group before the current call, the function module that you have called up at present can access the global data of the function group. The function group is not reloaded.
Within the internal session, all of the function modules that you call from the same group access the global data of that group.
If, in a new internal session, you call a function module from the same function group as in internal session 1, a new set of global data is initialized for the second internal session. This means that the data accessed by function modules called in session 2 may be different from that accessed by the function modules in session 1.
You can call function modules asynchronously as well as synchronously. To do so, you must extend the function module call using the addition STARTING NEW TASK ''. Here, '' is a symbolic name in the calling program that identifies the external session, in which the called program is executed.
Function modules that you call using the addition STARTING NEW TASK '' are executed independently of the calling program. The calling program is not interrupted.
To make function modules available for local asynchronous calls, you must identify them as executable remotely (processing type: Remote-enabled module).
There are various ways of transferring data between programs that are running in different program contexts (internal sessions). You can use:
(1) The interface of the called program (standard selection screen, or interface of a
subroutine, function module, or dialog module)
(2) ABAP memory
(3) SAP memory
(4) Database tables
(5) Local files on your presentation server.
For further information about transferring data between an ABAP program and your presentation server, refer to the documentation for the function modules WS_UPLOAD and WS_DOWNLOAD.
Function modules have an interface, which you can use to pass data between the calling program and the function module itself (there is also a comparable mechanism for ABAP subroutines). If a function module supports RFC, certain restrictions apply to its interface.
If you are calling an ABAP program that has a standard selection screen, you can pass values to the input fields. There are two options here:
By using a variant of the standard selection screen in the program call
By passing actual values for the input fields in the program call
If you want to call a report program without displaying its selection screen (default setting), but still want to pass values to its input fields, there is a variety of techniques that you can use.
The WITH addition allows you to assign values to the parameters and select-options fields on the standard selection screen.
If the selection screen is to be displayed when the program is called, use the addition: VIA SELECTION-SCREEN.
Use the pattern button in the ABAP Editor to insert a program call via SUBMIT. The structure shows you the names of data objects that you can complete with the standard selection screen.
For further information on working with variants and further syntax variants for the WITH addition, see the key word documentation in the ABAP Editor for SUBMIT.
You can use SAP memory and ABAP memory to pass data between different programs.
The SAP memory is a user-specific memory area for storing field values. It is available in all of the open sessions in a user's terminal session, and is reset when the terminal session ends. You can use its contents as default values for screen fields. All external sessions can access SAP memory. This means that it is only of limited use for passing data between internal sessions.
The ABAP memory is also user-specific, and is local to each external session. You can use it to pass any ABAP variables (fields, structures, internal tables, complex objects) between the internal sessions of a single external session.
Each external session has its own ABAP memory. When you end an external session (/i in the command field), the corresponding ABAP memory is released automatically.
To copy a set of ABAP variables and their current values (data cluster) to the ABAP memory, use the EXPORT TO MEMORY ID statement. The (up to 32 characters) is used to identify the different data clusters.
If you repeat an EXPORT TO MEMORY ID statement to an existing data cluster, the new data overwrites the old.
To copy data from ABAP memory to the corresponding fields of an ABAP program, use the IMPORT FROM MEMORY ID statement.
The fields, structures, internal tables, and complex objects in a data cluster in ABAP memory must be declared identically in both the program from which you exported the data and the program into which you import it.
To release a data cluster, use the FREE MEMORY ID statement.
You can import just parts of a data cluster with IMPORT, since the objects are named in the cluster.
In the SAP memory, you can define memory areas (SET/GET parameters, or parameter IDs), which you can then address by a name of up to 20 characters.
You can fill these memory areas either using the contents of input/output fields on screens, or using the ABAP statement:
SET PARAMETER ID '' FIELD .
The memory area with the name now has the value .
You can use the contents of a memory area to display a default value in an input field on a screen.
You can also read the memory areas from the SAP memory using the ABAP statement GET PARAMETER ID FIELD . The field then contains the value from parameter .
The link between an input/output field and a memory area in SAP memory is inherited from the data element on which the field is based. You can enable the set parameter or get parameter attributes in the input/output field attributes.
Once you have set the Set parameter attribute for an input/output field, you can fill it with default values from SAP memory. This is particularly useful for transactions that you call from another program without displaying the initial screen. For this purpose, you must activate the Set parameter functionality for the input fields of the first screen of the transaction.
You can:
(1) Copy the data that is to be used for the first screen of the transaction to be called to the parameter ID in the SAP memory. To do so, use the statement SET PARAMETER immediately before calling the transaction.
(2) Start the transaction using CALL TRANSACTION or LEAVE TO
TRANSACTION . If you do not want to display the initial screen, use the AND
SKIP FIRST SCREEN addition.
(3) The system program that starts the transaction fills the input fields that do not already have default values and for which the Get parameter attribute has been set with values from SAP memory.
The Technical information for the input fields in the transaction you want to call contains the names of the parameter IDs that you need to use.
Parameter IDs should be entered in table TPARA. This happens automatically if you create them via the Object navigator.
Programs that you call using the statements SUBMIT , LEAVE TO TRANSACTION , SUBMIT AND RETURN, or CALL TRANSACTION run in their own SAP LUW, and update requests receive their own update key.
When you use SUBMIT and LEAVE TO TRANSACTION , the SAP LUW of the calling program ends. If no COMMIT WORK statement occurred before the program call, the update requests in the log table remain incomplete and cannot be processed. They can no longer be executed. The same applies to inline changes that you make using PERFORM … ON COMMIT.
Data that you have written to the database using inline changes is committed the next time a new screen is displayed.
If you use SUBMIT AND RETURN or CALL TRANSACTION to insert a program and then return to the calling program, the SAP LUW of the calling program is resumed when the called program ends. The LUW processing of calling and called programs is independent.
In other words, inline changes are committed the next time a new screen is displayed. Update requests and calls using PERFORM ... ON COMMIT require an independent COMMIT WORK statement in the SAP LUW in which they are running.
Function modules run in the same SAP LUW as the program that calls them.
If you call transactions with nested calls, each transaction needs its own COMMIT WORK, since each transaction maps its own SAP LUW.
The same applies to calling executable programs, which are called using SUBMIT AND RETURN.
The statement CALL TRANSACTION allows you to
Shorten the user dialog when calling using CALL TRANSACTION USING .
Determine the type of update (asynchronous, local, or synchronous) for the transaction called. For this purpose, use the addition CALL TRANSACTION USING UPDATE 'update_mode', where update_mode can have the values a (asynchronous), L (local), or S (synchronous).
Combining the two options enables you to call several transactions in sequence (logical chain), to reduce their screen sequence, and to postpone processing of the SAP LUW 2 until processing of the SAP LUW 1 has been completed.
When you call a function module asynchronously using the CALL FUNCTION STARTING NEW TASK ' ' statement, it runs in its own SAP LUW.
Programs that are executed with a SUBMIT AND RETURN or CALL
TRANSACTION statement starts their own LUW processing. You can use these to perform nested (complex) LUW processing.
You can use function modules as modularization units within an SAP LUW.
Function modules that are called asynchronously are suitable for programs that allow parallel processing of some of their components.
All techniques are suitable for including programs with purely display functions.
Note that a function module called with CALL FUNCTION STARTING NEW TASK is executed as a new logon. It, therefore, sees a separate SAP memory area. You can use the interface of the function module for data transfers.
Example: In your program, you want to call a display transaction that is displayed in a separate window (amodal). To do so, you encapsulate the transaction call in a function module, which you set as to Remote-enabled module. You use the function module interface to accept values that you write to the SAP memory. You then call up the transaction in the function module using CALL TRANSACTION AND SKIP FIRST SCREEN. You call the function module itself asynchronously.
Type ‘E' locks for nested program calls may be requested more than once from the same object. This behavior can be described as follows:
Lock entries from function modules called synchronously increment the cumulative counter, And are therefore successful.
Lock entries from programs called with CALL TRANSACTION or SUBMIT
AND
RETURN is refused. The object to be locked by the called program is displayed as already Locked by another user.
Programs that you call using SUBMIT or LEAVE TO TRANSACTION cannot come into conflict with lock entries from the calling program, since the old program ends when the call is made. When a program ends, the system deletes all of the lock entries that it had set.
Lock requests belonging to the same user from different R/3 windows or logons are treated as lock requests from other users.
Regards,
Rajesh.
Please reward points if found helpful.

How can I see the photos of iPhoto in a TV via Air Play ?

how can I see the photos of iPhoto in a TV via Air Play ?
I have a MacBook Pro ( dec 2010) v. 10.7.5

Clodo9, thanks for your response, but a "thunderbolt", or "mini-display" port is different from a lightning port. Old Toad found a solution:
Old Toad Toad Hall, Temecula CA
This solved my questionRe: Is there a Apple Lightning to HDMI adapter?
Feb 26, 2014 6:33 PM (in response to vburger)
Did you check the online Apple Store? I found this: Lightning Digital AV Adapter - Apple Store (U.S.)
OT

How do I see the downloaded percentage of Mavericks?

Last night I started downloading Mavericks but accidentally shut down my computer mid download. When I restarted my computer today I tried to resume the download by right clicking the Mavericks icon on the dock but the download wouldn't restart. So I thought I'd get rid of the Mavericks icon from my dock and start again from scratch.
So now tried re-downloading Mavericks from the App Store and now there isn't an icon on the dock telling me how far along my download is. However, according to the App store it is downloading but there's no status bar about how far along it is. I'm not entirely sure if it's downloading either. How do I see the status of the download/restore the Mavericks icon in the dock during the download? And approximately how long will it take? I'm currently on 10.6.8 on my iMac.
Any help would be appreciated!

The download time will be dependant on your download speed from your ISP. It's a large file (5.31GB, I believe) so, with 60 Mbps speeds that I have, it can take up to 45 minutes (and that's depending on how responsive Apple's servers are at any given time).
You should be able to see the download taking place in your Launchpad icon - and in the Mac App Store as well. I'm a bit confused about what you call the "Mavericks" icon as there should be no Mavericks icons in your Dock when you're downloading.
Try the download again - check your MAS window and your Lanchpad icon for progress.
Good luck,
Clinton

How do I see the model and manufacturer of my wifi card?

how do I see the model and manufacturer of my wifi card?
MacBook Pro 13-2011

Shootist007 wrote:
That is not correct. Apple really doesn't build any parts. They are all made by some other manufacturer and then installed in Mac computers as Add-on cards or soldered onto the motherboard, Apple Speak Logic board, before it is installed in the computer.
As to the WiFi card Broadcom makes most of the chips and they are then soldered onto a Duaghter card that is then inserted in a socket. The socket for the WiFi card is near the back of the system just behind the Superdrive. That is on the standard MBP. On the Retina models I'm not sure where it is placed.
Strebsjig wrote:
As far as I know, Apple only uses their own AirPort 'cards' (they aren't really cards anymore, but integrated chips). So the manufacturer is Apple, and the model is just AirPort.
Technically, you are correct. The original manufacturer is Broadcom, but all the WiFi chips Apple is using are rebranded as Apple, Inc. AirPort Extreme.

HT2404 How can I stop the Software Update madness??

I recently bought an Epson printer to replace my broken HP printer. I uninstalled all the HP-related software, but I still am getting prodded by Software Update to update software I no longer have! How can I stop the Software Update madness??

There are literally thousands of sites with videos (linked to from yet thousands more) that will prompt you to "upgrade" or update your already updated Flash Player. This is the most common method of delivery for malware like that.
A friend who runs a PC Repair business told me that if you've updated your Flash Player and you see a warning in a web page that you need to download an update to watch a video, it's an attack site.
A simple gesture of holding your mouse over the warning or link, will indicate the address it points to. If it DOESN'T say Adobe anywhere in the beginning of the address (download.adobe.com, or adobe.com/downloads), it's a forgery, and you should leave that page immedaitely. If you download and install whatever they link you to, it may play the content you were looking for, but you've just been infected with something that may lay dormant for months and then suddenly take over your whole system.
If you use your PC for work, you're really in trouble.

TS3367 Using FaceTime between 2 iPhone 4s I can hear the other person but we only see ourselves, how do we see the other person

Using FaceTime between 2 iPhone 4s I can hear the other person but we only see ourselves, how do we see the other person

Once the connection is made you should automatically see the other person full screen, with a small inset picture of yourself. Normally you only see yourself full screen after you initiate the call prior to the other person accepting it. Are you both connected to wi-fi and are you initiating the call by tapping the FaceTime button on the other person's contact?

How I can see the amount of sticky entries exist on CSM

Hi everyone,
I would like to know how I can see the amount of sticky entries exist on CSM.
I understand I can not see the amount of sticky entries by executing one "show"
command on Cat6k/CSM.
So I have to calculate several output of "show ip slb sticky" to see it.
However, I would like to get it by simple way.
So I tried the following test by using SNMP (SNMP-GET point to several instance
of "slbStats", of 1.3.6.1.4.1.9.9.161.1.1.1.1)
Client ----- CSM ----- Server
1: Reboot CSM to clear/initialize sticky table
2: Client send ping to Server to confirm that the result of counter of "slbStats"
remains zero (0).
In this case, I understand CSM should not create an entry on sticky table because
the packet pass through CSM is not either TCP or UDP.
3: Then I tried to SNMP-GET to CSM point to several instance of "slbStats"
The result of this SNMP-GET is as follows:
Before sending ping
slbStatsCreatedConnections.2 : 0
slbStatsCreatedHCConnections.2 : 0
slbStatsEstablishedConnections.2 : 0
slbStatsEstablishedHCConnections.2 : 0
slbStatsDestroyedConnections.2 : 0
slbStatsDestroyedHCCConnections.2 : 0
After sending ping
slbStatsCreatedConnections.2 : 4
slbStatsCreatedHCConnections.2 : 4
slbStatsEstablishedConnections.2 : 1
slbStatsEstablishedHCConnections.2 : 1
slbStatsDestroyedConnections.2 : 3
slbStatsDestroyedHCCConnections.2 : 3
I wonder why all of above MIB objects are increased despite of the packets pass
through CSM are ICMP.
So I can not determine whether I should use this method (using SNMP) or not to
see correct value of the amount of sticky entries
And I would like to know alternative method to see it by SNMP or other simple way.
Your information would be greatly appreciated

Hi Gilles,
Thank you very much for your pointing and suggestion and I am sorry for my delay response.
I understand there are two kind of CLI on CSM depend on using CSM mode or RP mode.
- show command begins with "show ip slb" when using CSM mode (ip slb mode csm)
- show command begins with "show mode csm x" when using RP mode (ip slb mode rp)
And "show mod csm x sticky config" command can be done on RP mode only.
So I tried to "show ip slb sticky config" command on CSM mode, but I could not find
"config" argument as follows,
ct65svf1#sh ip slb sticky ?
client sticky associated with a specific client IP address
groups list configured sticky groups
| Output modifiers
ct65svf1#sh ip slb sticky
So I think, on CSM mode, I can not calculate the amount of sticky entry by executing one
show command.
Is my understanding correct ?
Best regards,

How to change & see the PO Status (Purchase Order Status) ?

Hi Everybody,
I have to change the PO Status. For this I am using the Function Module 'BBP_PD_PO_STATUS_CHANGE'. But it is not changing the PO Status. How/Where to see the PO Status?
Please help me out asap.
Thanks & Regrds,
Nagaraju Maddi
Message was edited by: Nagaraju Maddi

Hi ,
It is possible to Update the Pricing procedure in Old PO. For this what you need to do is Open PO in ME22N transaction, in the header Org. Data tab remove the Purch. Org and Company Code and press Enter Key for 3 or 4 times now enter the Purch. Org and Company Code now check in the Item Data, condition tab Analysis button new Pricing procedure is picked up. Even we can change the PO Currency in this way if it is changed in Vendor master.
Hope this will help you
Best Regards,
Pradeep Naik

How can I see the old backups of my previous Macbook done by Time machine in a Time capsule with my new iMac?

How can I see the old backups of my previous Macbook done by Time machine in a Time capsule with my new iMac? I've changed from a Macbook to a iMac because that one stopped working and I cannot use it anymore. I've been able to import all the data of the last backup of the Macbook when setting the new iMac, but I cannot access now to the old backups of the Macbook and there are information that wasn't in the last backup and I would like to recover. Thank you very much.

Yes, you can ..
Read Q17 here.
http://pondini.org/TM/FAQ.html
Strongly recommend his whole section.. 14-17 and read it carefully to understand the ways you can make TM work for you.

How can I see the contents in a Ref Cursor

I have this code:
CREATE OR REPLACE PACKAGE APOD_LOG.APOD_C3_LOG_API_PKG
AUTHID CURRENT_USER
AS
type rc is ref cursor;
PROCEDURE Fetch_Log_Spec
in_LOCAL_IP_VALUE IN BINARY_INTEGER,
out_RESULT_SET OUT rc
END APOD_C3_LOG_API_PKG;
CREATE OR REPLACE PACKAGE BODY APOD_LOG.APOD_C3_LOG_API_PKG
AS
PROCEDURE Fetch_Log_Spec
in_LOCAL_IP_VALUE IN BINARY_INTEGER,
out_RESULT_SET OUT rc
IS
BEGIN
DBMS_APPLICATION_INFO.set_module(module_name => 'APOD_LOG.API_PKG',action_name => 'Fetch_Log_Spec');
DBMS_APPLICATION_INFO.set_client_info(client_info => 'Calling with in_LOCAL_IP_VALUE = ' ||to_char(in_LOCAL_IP_VALUE));
open out_RESULT_SET for
select
in_LOCAL_IP_VALUE as IN_LOCAL_IP_VALUE,
10002 as PORT,
APOD_CORE.UTIL_IP_PKG.IPAddressToIPValue2('''224.168.100.1''') as MULTICAST_IP_VALUE
from
dual
union
select
in_LOCAL_IP_VALUE as IN_LOCAL_IP_VALUE,
10002 as PORT,
APOD_CORE.UTIL_IP_PKG.IPAddressToIPValue2('''224.168.200.1''') as MULTICAST_IP_VALUE
from
dual
union
select
in_LOCAL_IP_VALUE as IN_LOCAL_IP_VALUE,
10002 as PORT,
APOD_CORE.UTIL_IP_PKG.IPAddressToIPValue2('''224.168.100.123''') as MULTICAST_IP_VALUE
from
dual
union
select
in_LOCAL_IP_VALUE as IN_LOCAL_IP_VALUE,
10002 as PORT,
APOD_CORE.UTIL_IP_PKG.IPAddressToIPValue2('''224.168.200.123''') as MULTICAST_IP_VALUE
from
dual;
DBMS_APPLICATION_INFO.set_client_info(client_info => 'Called Fetch_Log_Spec '||to_char(SQL%ROWCOUNT)||' row(s) returned with in_LOCAL_IP_VALUE = '||to_char(in_LOCAL_IP_VALUE) );
END Fetch_Log_Spec;
END APOD_C3_LOG_API_PKG;
And I am trying to test it like this:
DECLARE
IN_LOCAL_IP_VALUE BINARY_INTEGER;
OUT_RESULT_SET APOD_LOG.APOD_C3_LOG_API_PKG.rc;
BEGIN
IN_LOCAL_IP_VALUE := 23374048;
-- OUT_RESULT_SET := NULL; How do I see this
APOD_LOG.APOD_C3_LOG_API_PKG.FETCH_LOG_SPEC ( IN_LOCAL_IP_VALUE, OUT_RESULT_SET );
END;
How can I see the dataset returnd by the OUT_RESULT_SET in SQLPlus or Quest ScriptRunner?

A ref cursor doesn't really contain rows but you can use them to reference a SQL statement that fetches the rows.
Re: returning resultset from procedure...or pkg

How do I see the responses I made to emails on my iPad?

Similar Messages

Maybe you are looking for