How do i see the thumbnails when using File Explorer

How do I get to see the thumbnail preview when using File > Open?

Not sure if this has been answered yet, but Illustrator thumbnails aren't showing in Creative Cloud Web file list. Also, anywhere to quick preview/navigator the file?

Similar Messages

How can you see the progress when using a ForEach loop?

Hi,
I have an array with about 100 containers in it. My main thread uses a ForEach loop with an inner case structure with six possibilities. My previous program had all the steps in a very long list, executing them one by one. I find this new approach is much nicer to look at, and easier to change, but there isn't really any way of telling how far along the test is (unless you know it by heart). In the long list approach, you could see all the Done/Passed outcomes and how many remained, now there is no way of telling.
Any tips on making some kind of progress indication?
Solved!
Go to Solution.

As ObjectReference parameter, you should use 'Nothing'. The last parameter (synchronuous?) you can choose true or false. Please refer to the documentation of PostUIMessageEx for further information.
The numeric parameter should range between 0-100. Since it is "Progress Percent", this makes sense, does it?
The status bar has several panes, one e.g. displaying the logged in user or the used process model. The pane on the right most side will display the Progress Percent if used in your sequence.
The default reporting, as already stated, includes this feature. So if you have a sequence with e.g. 500 steps, the reporting "will have a visible progress" in that pane (with less than 100 steps, it is most often too fast to see). Remember that NI Sequence Editor and the Full Featured User Interfaces do have this feature, the Simple UI does not have it.
Norbert
CEO: What exactly is stopping us from doing this?
Expert: Geometry
Marketing Manager: Just ignore it.

After burning a successful DVD in iDVD out of FCPX, how can I see the settings it used? So I finally burned a DVD out of a Apple Pro Res file into iDVD in PAL format. My question now is how can I find out what the exact burn properties were so that I ca

After burning a successful DVD in iDVD out of FCPX, how can I see the settings it used?
So I finally burned a DVD out of a Apple Pro Res file into iDVD in PAL format. My question now is how can I find out what the exact burn properties were so that I can apply the same burn properties to a project in Compressor 4?
Is it possible to see what iDVD did?

I don't know any way you can interrogate iDVD to reveal settings to the extent that you can in a Compressor project. What you could do is open up the show's VOB in MPEG STreamclip, go to File and Reveal Stream Information; that will at least give you some rudimentary info like average bit rate. Perhaps someone, with more iDVD experience, can chime in here.
The broader question is why use Compressor at all if your current workflow is doing the job to your satisfaction?
The value of Compressor is that it gives you control over the many parameters that affect size quality. and playability. The Compressor presets can give you a starting point for DVD delivery, Web, etc. From those presets, people typically experiment by adjusting the parameters until they get the desired results for their specific show. It's a little bit science and a little bit art. After experimenting, you may be able to get slightly better quality for the project you've successfully burned in iDVD by using Compressor and something likeToast…or maybe not.
Good luck.
Russ

How can I see the information about a file used in a sequence?

How can I see the information about a file used in a sequence?

You can use pretty much any two or multiple button mouse on a Mac, right out of the box.
I use this one: http://www.apple.com/mightymouse/

How do I see the URL when I mouse over a link?

how do I see the URL when I mouse over a link?

Should show at the bottom of your window if you go to View and click on Show Status Bar.

How can I customize the toolbar when using the attribute browser

In CVI 2012, the toolbar changes depending on the environment, e.g. it is different for the source window and the UI editor. The toolbar can be customized using the menu Options / Toolbar...
Unfortunately, when using the attribute browser of the UI editor, another toolbar is displayed, i.e. not the UI editor toolbar.... I would have assumed that the attribute browser belongs to the UI editor, obviously it doesn't... So how can I customize the toolbar when using the attribute browser?
Solved!
Go to Solution.

Luis,
It's nice to have you back
Thank you for the clarification, so I'll elaborate a bit more: In the regular workspace toolbar, I have a disk symbol to save the file. This symbol is gone in the attribute browser...
So I have three different toolbars, for source code (workspace), UI editor, and the UI editor displayed but the attribute browser clicked on (selected)...
Thanks
Wolfgang
Source code:
UI editor:
Attribute browser:

After burning a successful DVD in iDVD out of FCPX, how can I see the settings it used?

After burning a successful DVD in iDVD out of FCPX, how can I see the settings it used?
So I finally burned a DVD out of a Apple Pro Res file into iDVD in PAL format. My question now is how can I find out what the exact burn properties were so that I can apply the same burn properties to a project in Compressor 4?
Is it possible to see what iDVD did?

Why don't you ask this question on the iDVD forum?

How to remove Open/Save prompt when using Internet Explorer

Acrobat XI Pro was deployed with custom MST that had When using Internet Explorer prompt for Open/Save. Is there a hack that will disable this prompt without having to re-install Acrobat XI Pro?

An engineer gave me a possible solution, but I don't have permission on my machine to test it. You can try the following:
-- snip --
This is because of not having necessary permissions to edit the registry. To obtain the permission, follow following steps:
Right click on “HKEY_CLASSES_ROOT\AcroPDF.FDF.1” and click permissions.
On permissions dialog, click Advanced.
In the new dialog, select Owner tab and make current user as owner.
Click Apply and close the dialog.
Close the permission dialog.
Try editing the registry as suggested.

How do I see the TOC when I "View Item"

Hello,
I know this is simple, but I am a total Robo newb.
I have created the TOC and pages and then linked those pages to the TOC.
When I click "View Item", all I see is the page without any TOC.
What preview option should I use that will show me the TOC along with the pages that are linked to it?
Thanks!
Jeff

Hello again
Wow... lots of questions! I'll do the best I can to respond to these.
I don't know what we are publishing to yet. I think we are going to design our FAQ with Robo and then place that HTML on one of our web pages. Is that possible and which view option is best for this purpose?
Certainly a FAQ is possible. However, that would sound more like a single page. RoboHelp can certainly create a single page that you could copy and splice into a larger web site, but I'm not sure why one would want to do that. Tools like RoboHelp come into their own when creating a large body of information that needs to be organized using a Table of Contents and information easily found via an Index and by searching.
Unfortunately I'm unclear on what is meant by asking which view option is best. Perhaps you aren't 100% sure about why folks use RoboHelp and what it does. Apologies in advance if you knew any of this, but here goes.
You use RoboHelp to combine many ingredients (HTML Topic pages, Images, etc) into a "dish" that is served to users. That "dish" may be in the form of a system known as WebHelp, FlashHelp, Microsoft HTML Help, Multiscreen HTML 5 or other. What you create depends on what your audience needs or wants. If most are using iPads or Android tablets, you likely want Multiscreen HTML 5. If most are using Desktop or Laptop PCs, you may want WebHelp. But again, if all you are wanting is a single HTML page that presents a list of FAQs, RoboHelp is definitely overkill.
Frankly, I prefer the look of the WebHelp view because the Multiscreen HTML 5 view has strange colors. I don't see any color or skin options for Multiscreen. How can I change colors in Multiscreen HTML 5?
Well, that one is a bit tricksy not only to answer, but to pull off once you know how! To begin making changes to the Multiscreen HTML 5 layout, you need to click View > Pods > Project Set-up. Then expand the Screen Layouts folder. Then expand the layout of interest. You should see a layout for the Table of Contents, the Index, the Glossary, etc. Right-click and choose Edit. And that's where the REAL fun begins. (cough)
Bottom line is that this area is most definitely NOT for the faint of heart or for folks unfamiliar with CSS and whatnot. In other words, editing is a wee bit on the daunting side. I'm so so hoping that it will be easier in the next version!
I have a few test projects open for testing purposes. For one project, under "Single Source Layouts", when I right click Multiscreen HTML 5, it shows a "View with Browser" option, but when I do the same thing on another project, I do NOT see "View with Browser" option under Multiscreen HTML 5. Why is this happening?
Well, it's unfortunately difficult to say what may be going on without seeing the projects first hand. As I indicated earlier, Multiscreen HTML 5 is the new kid on the block and as such, is a bit convoluted. For example, let's say you managed to sort all the colors and icons and whatnot for one layout. Before you generate your output, you must now ensure you edit the properties of the Multiscreen HTML 5 layout and map the layouts to the profiles. So possibly this bit is missing. I'm not sure.
Lastly, when I view view the project the first book is always open by default. How can I make all books closed by default when viewing?
In any given project, there is a topic that is known as your Default Topic. It's quite simply the first topic presented to the user when the help system is opened. Typically, topics presented in the Topic pane also synchronize to the Table of Contents. So if your Default Topic is inside a book of the TOC, POOF! The book will be expanded showing where the matching topic is. One way to ensure the books are closed is to nominate a topic that isn't in the TOC structure as the Default Topic. You do this by manipulating the properties of the Single Source Layout.
Hopefully that was both understandable and helpful... Rick

How can i see the lyrics when i'm listening music on iTunes?

i've alredy taked the lyrics in the info menu but i don't know how to see it when i'm listening music

LucaReccia wrote:
i've already added the lyrics at all the song but i can see it just on my iphone, i want know any plugins for itunes that make me see the lyrics of the current song
There are no plug-ins to do this.

Picture appears white (cannot see the image) when using camera raw filter in photoshop cc

I have a fresh install of Photoshop CC on my macbook. I am running into an issue when editing an image in Photoshop cc and using the camera raw filter. If I choose the camera raw filter camera raw opens up but all I see is white - the picture is not showing within the camera raw interface. This happens whenever I am working on a layer and apply the camera raw filter. The only time it works is when I do not have any layers but only the image as it comes directly from within camera raw - then it works fine. I'm guessing there is something really basic I am missing but it is maddening!

You are welcome.
The Camera RAW filter will not work on an adjustment layer alone. Select the layer with the image and the adjustment layer and convert to a smart object to apply the Camera RAW filter to the image with the adjustment layer applied.

How do I fix the scrolling when using my iPhone on my laptop to select which Podcasts I want to add?

When I plug my iPhone into my laptop and then click on Podcasts, it won't let me scroll to choose which Podcasts I want to add. To fix that, I click on one of the Podcasts and then it is sort of fixed, but then I can't scroll through each individual Podcast episode. I thought it was because my laptop was just old, but I now have a new one and the problem is still there. Does anyone know how I can fix this?

Hi Playerking95,
Welcome to the Apple Support Communities!
It sounds like you are trying to sync Podcasts from your iTunes library on your computer to your iPhone. In your situation I would recommend reading over the attached article for information.
Podcasts for iOS: Sync podcasts
http://support.apple.com/kb/HT6202
Have a great day,
Joe

I can't see the video when using the flash player

Hello everyone, I am having difficulty trying to fix the video of my adobe flash player. The audio works well on the flash player but the screen is black for the video. I have read the helpful tips on the adobe website and I have already: downloaded the most recent flash player, managed the add-ons, unchecked activeX filtering, deleted the flash player browsing data, and removed the flash player cache. I am at a loss for what to do next. Youtube works fine, but when I go to cbs.com to watch full episodes I can't see anything. It would be greatly appreciated if anyone can help. Thank you, Aaron Weinstein

I went and look up that information and then I went to the AMD website do download the graphic drivers and software and it said that it couldn't so I should contact HP. I then went to the HP website, put in the information of my computer and looked to see what graphic drivers I could update. Unfortunately I have the same graphic driver that they are saying is the only update for my computer. I appreciate the suggestion but it didn't work. Thanks, Aaron

How can I rotate the view when using my surface tablet in a docing station

previous answers suggest to rotate the tablet which does not work in this case.

Bernd, great to hear the message again. But this is ab big issue to use Adobe Reader in professional environment with my tablet in a docing station conected to a 24" screen: "Just turn your tablet" does not work in this case. Is there a chance of an update soon or is it possible with Adobe Profesional?

How can I magnefy the screen when using firefox

I have seen in other Browsers that you can magnify the screen by choosing 100% or 150%, etc.
Please how can one do this in Firefox.
Thank You
Alvaro Gil Fernandez

See this:
https://support.mozilla.com/en-US/kb/Page+Zoom
The Firefox Page Zoom feature does a domain by domain level of saving the users preferred zoom level settings, there is no default Page Zoom level setting in Firefox.
Try the Default FullZoom Level extension: <br />
https://addons.mozilla.org/en-US/firefox/addon/6965
Or the NoSquint extension: <br />
https://addons.mozilla.org/en-US/firefox/addon/2592/

How do i see the thumbnails when using File Explorer

Similar Messages

Maybe you are looking for