How do I see the video while I'm adding the voice?

I use garageband ´09 version 5.1 to add voice to mov-files. On youtube I saw a guy who could watch the video in garageband while he was recording his voice (very helpful), but I can't. My garageband doesn't look as his eather, this is what mine looks like:
http://img543.imageshack.us/img543/6145/bild2a.png
How do I watch the video in this version?

Double-click the little picture in the track header, and a preview window will open that you can size any way you like!

Similar Messages

  • IOS6... How do I see the full screen when watching youtube videos and second the map quality is very poor, foggy most of the time and images overlap to each other... Can I restore to IOS6 if these problems can not be solved?

    I just upgraded to IOS6 and I have some difficulties that I never had on IOS5:
    How can a see the full screen when watching youtube. Address bar is always in view.
    Maps are foggy and some images overlap to eachother.
    If these problems can not be solved, how do I downgrade back to IOS5?
    Regards,
    Luis

    Luis757 wrote:
    If these problems can not be solved, how do I downgrade back to IOS5?
    Regards,
    Luis
    No, there is no legitimate way to downgrade iOS to an earlier version.
    Be patient, Apple will eventually get around to fixing the "bugs" in iOS 6.
    You can leave feedback here: Apple Feedback.

  • How can I see the url of a link before clicking on it?

    Hi. I have Firefox 10.0.2. I used to be able to see the url of a link on web pages in the bottom left of the browser. That way, if I the url didn't seem legit I wouldn't click on the link. But now, when I put the mouse over a link, nothing comes up. How can I see the link addresses again? Thanks.

    The Status Bar. where the link previously showed on mouse hover, has been replaced by the Add-on Bar. You can install the following add-on to get some of the former Status Bar functions back. The Add-on Bar must be turned on. The add-on will also stop the showing of the "tooltip" type status loading text, and will, instead, show it in the Add-on Bar:
    *See --> https://support.mozilla.org/en-US/kb/what-happened-status-bar
    *To turn on the Add-on Bar, see --> https://support.mozilla.org/en-US/kb/Back%20and%20forward%20or%20other%20toolbar%20items%20are%20missing#w_showing-the-navigation-toolbar '''and click on "Add-on Bar" to check it'''
    *Add -on '''''Status-4-Evar''''': https://addons.mozilla.org/en-US/firefox/addon/status-4-evar/
    *If necessary, after install and restart:
    **Open Customze window (Firefox button > Options > Toolbar Layout '''''OR''''' View > Toolbars > Customize '''''OR''''' ALT+V+T+C '''''OR'''''right-click in the empty space at the end of the Tab Bar and choose Customize)
    **'''While Customize window is open''', drag any or all of the following from the Customize window to the Add-on Bar in the order and position you want them to appear. Then click "Done" button at lower right on the Customize window.
    ***"Status Text" ('''''link on mouse hover or during page loading''''' or "Done" when page is loaded)
    ***"Progress Meter" (progress bar of page loading)
    ***"Download Status" (status of download)
    '''If this reply solves your problem, please click "Solved It" next to this reply when <u>signed-in</u> to the forum.'''
    Not related to your question, but...
    You may need to update some plug-ins. Check your plug-ins and update as necessary:
    *Plug-in check --> http://www.mozilla.org/en-US/plugincheck/
    *Adobe Shockwave for Director Netscape plug-in: [https://support.mozilla.org/en-US/kb/Using%20the%20Shockwave%20plugin%20with%20Firefox#w_installing-shockwave Installing ('''''or Updating''''') the Shockwave plugin with Firefox]
    *Adobe PDF Plug-In For Firefox and Netscape: [https://support.mozilla.org/en-US/kb/Using%20the%20Adobe%20Reader%20plugin%20with%20Firefox#w_installing-and-updating-adobe-reader Installing/Updating Adobe Reader in Firefox]
    *Shockwave Flash (Adobe Flash or Flash): [https://support.mozilla.org/en-US/kb/Managing%20the%20Flash%20plugin#w_updating-flash Updating Flash in Firefox]
    *'''''Next Generation Java Plug-in for Mozilla browsers''''': [https://support.mozilla.org/en-US/kb/Using%20the%20Java%20plugin%20with%20Firefox#w_installing-or-updating-java Installing or Updating Java in Firefox]

  • How can I see the relationship of tables in Microsoft SQL Server?

    How can I see the relationships of the tables? Exactly like what we see in Access. In Access if we select Database tool and then relationships, we can see how the tables are linked to each other. How can I find this option in SQL Server Management Studio?
    Thanks,
    GGGGGNNNNN
    GGGGGNNNNN

    Thanks,
    I could verify what you explained here. how can I overcome this message and resolve it when my database owner is not there:
    Message while starting with database diagrams of a attached/restored database
    If you have just attached/restored a database from another SQL Server instance. While accessing its database diagrams folder, you may get the following message
    It is an informational message and would prevent you from working on database diagrams. The message says that your database has no valid owner currently. Reason for this error is that database owner on a previous SQL Server instance does not exist here.
    To overcome this error just add the valid database owner through T-SQL or SSMS. Also verify the compatibility level of your database is correct for your SQL Server instance.
    I appreciate your help.
    GGGGGNNNNN
    GGGGGNNNNN

  • How can i see the progress of import?

    Hi.
    Does anyone happen to know how you can see the progress of file import on FCPX?
    I was importing from my camera and after a while thought FCPX was done, so i tried to eject the cam. Then FCPX prompted me that it was still busy importing.
    Is there a way to see progress bars or something similar?
    thanx

    Press Cmd-9 for the background process HUD, click here.
    This should be pretty darn quick, but without knowing what camera and format you're talking about it's hard to tell.

  • How do you see the contents of your "Domain" file?

    Thanks to this forum I have found out that the photo files on my Web site are stored in the Domain file under Application Support. How do you see the contents of this file? When I double-click on it, iWeb launches and I see the actual Web site.
    12" PowerBook   Mac OS X (10.4.8)   G4 1.5 GHz, 768 MB RAM

    i don't think it will work. because when you open up the domain file after you changed the size of the pictures, iWeb will probably save again while uploading - so the changes were for nothing. yet i haven't tried it.
    other way is to change them after you published. using graphic converter you just drag all at once in and change all the sizes at once.
    mp

  • Created Mask - How do I see the mask?

    Watched about 5 tutorials, read 3 articles...clearly see how to make a mask. I'm here with my yellow box, my mask is feathered, but I can't get back to the footage to SEE the mask in action.   How do I see the mask over the video footage? I've double-clicked everything and when I play the footage, it's just a transparent background and my feathered mask.   Thanks for the help.

    Thanks for the help!
    I need to remove the logo on the right shoulder of the gray shirt. It's a very short clip, less than 10 seconds, and there's very minimal movement in the shot. I thought this would be a quick mask.....but...

  • How do I see the frequency of a point in spectral frequency display

    Hi all,
    I have recently tried out Au 6 (I use Au 3 at the moment), and though I very much like almost everything so far, there is one HUGE problem...how do I see the frequency of a point under the cursor?  In Au 3 this appeared in the status bar, but I can't figure out how to see it in Au 6.  I spend a lot of times editing bird sounds, and this is an absolutely vital feature for me; without it I will probably have to stick to Au 3.  A huge thanks for anyone who can help with this!
    John

    I've tried the method recommended here for a while, and I must say I am extremely unimpressed.  Sure, you can get grid lines to be fairly accurate.  But by the time you've zoomed in to the spot to get the desired frequency (see another post recently by me about the problems with THAT), mentally converted the value into hertz instead of kilohertz to use in the fft filter or where, it's take 3-4x as long, minimum, than it did in Au3.  Why on earth did Adobe get rid of this feature?  Every other sound editing tool I've used has it.  It's as basic as the eraser on the end of a pencil...sure, you can get by without it, but it makes the whole tool so much more useful.  I edit hundreds upon hundreds of sounds, and anything that makes editing a sound take that much longer is a serious issue.  Regrettably I cannot justify a purchase of Au6 at this time, and since I've moved to a mac I can no longer use Au3.  So this will probably be the end of me using Adobe audition.

  • How do I see the iTune podcasts

    I used to be able to turn the triangle icon down and see the podcasts I had downloaded.
    Now all I see are squares for each podcast I subscribe to.
    How do I see the individual shows?
    By the way some tunes I bought from the iTunes store won't load. This has been a problem for a while though.

    If you set it to "view as grid" that does work.
    Many of the "covers" that used to exist on both the ap and on the iPod, such as KCRW's Le Show, no longer show. Instead there's a black anf gray icon.
    I've tried "get album artwork" on Advanced but some of the radio podcasts no longer have their logos.

  • How do I see the duration of a call?

    How do I see the duration of a call?

    Tap the i icon on the right side each call that's listed under Recents while in the PHone app.

  • How do i see the amount of people who listen to my podcast?

    How do i see the amount of people who listen to my podcast?

    I use Feedburner at http://www.feedburner.com to create all the podcast enclosures for my RSS feeds. In addition to that, they keep track of the circulation which I believe amounts to an approximate number of subscribers that listen to the podcast.
    You can even have a little chicklet that you can put on your webpage so you can keep track of your stats without having to login to your feedburner account. You can see a sample of this chicklet on my son's video podcast page at: http://niotv.blogspot.com
    I hear that libsyn.com also keeps detailed stats of how many listeners are listening to your podcast if libsyn is your podcast host.
    15 Powerbook G4 Titanium   Mac OS X (10.4.5)  

  • How can i see flash videos in iPad?

    i have some video players in my website for playing videos.
    iPad support for playing flash videos?
    youtube videos playing in iPad. but not playing my videos.
    how can i see flash videos in iPad?
    or
    any solution?

    you can't use Flash video players on iPad.
    youtube probably detects the device and if it doesn't support flash plays the videos in HTML5

  • HT4859 how do you see the items that are backed up to iCloud -  I have 4.5 GB that I have used but I cant find where to see those items...help

    how do you see the items that are backed up to iCloud -  I have 4.5 GB that I have used but I cant find where to see those items...help

    That is everything in your iCloud account.  Videos and camera roll photos are only included in your backup, the size and content of which you can see on your phone in Settings>iCloud>Storage & Backup>Manage Storage>tap the name of your device under Backup.  This will show you the size of "Camera Roll", where these are contained.  (You can't see any detail beyond that.)  Photo stream photos can only been seen in your photo stream album on your phone, and they don't count against your storage so they aren't part of the 4.5 GB.  Everything esle is either in the backup, the items listed in Settings>iCloud>Storage & Backup>Manage Storage, or on icloud.com, where you can see your contacts, calendars, etc.

  • I rent a film but after the download I don't see the rental voice on itunes, how can I see the film ? Thanks in advance

    I rent a film but after the download I don't see the rental voice on itunes, how can I see the film ? Thanks in advance

    On your ipad?
    It belongs in the videos app.  Did you look there?

  • I used Time Machine to recover my Pictures folder. This created a folder called Pictures (original) but I cannot open it.  There is a do not enter roadsign, red disk and white bar on it.  How can I see the contents?

    I used Time Machine to recover my Pictures folder. This created a folder called Pictures (original) but I cannot open it.  There is a do not enter roadsign, red disk and white bar on it.  How can I see the contents?

    Repairing the permissions of a home folder in Lion is a complicated procedure. I don’t know of a simpler one that always works.
    Launch the Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Terminal in the page that opens.
    Drag or copy — do not type — the following line into the Terminal window, then press return:
    chmod -R -N ~
    The command will take a noticeable amount of time to run. When a new line ending in a dollar sign ($) appears below what you entered, it’s done. You may see a few error messages about an “invalid argument” while the command is running. You can ignore those. If you get an error message with the words “Permission denied,” enter this:
    sudo !!
    You'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning not to screw up.
    Next, boot from your recovery partition by holding down the key combination command-R at startup. Release the keys when you see a gray screen with a spinning dial.
    When the recovery desktop appears, select Utilities ▹ Terminal from the menu bar.
    In the Terminal window, enter “resetpassword” (without the quotes) and press return. A Reset Password window opens. You’re not going to reset the password.
    Select your boot volume if not already selected.
    Select your username from the menu labeled Select the user account if not already selected.
    Under Reset Home Directory Permissions and ACLs, click the Reset button.
    Select  ▹ Restart from the menu bar.

  • How can I see MPEG2 video format on IPAD ?

    Could anybody tell me how can I see mpeg2 video format on IPAD 3 ?
    Thks.

    Apparently you can't.
    Pad2, the new iPad Supported Video Formats & Movie Formats
    H.264 video up to 1080p, 30 frames per second, High Profile level 4.1 with AAC-LC audio up to 160 Kbps, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats;
    MPEG-4 video up to 2.5 Mbps, 640 by 480 pixels, 30 frames per second, Simple Profile with AAC-LC audio up to 160 Kbps per channel, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats;
    Motion JPEG (M-JPEG) up to 35 Mbps, 1280 by 720 pixels, 30 frames per second, audio in ulaw, PCM stereo audio in .avi file format
     Cheers, Tom

Maybe you are looking for