How do I select an area on a clip in a timeline and copy and paste it ..

How do I select an area of a clip in the timeline and copy and paste the video track only, several times on the tracks just above it?
Thank You in Advance,
Sebastian

Select the range selection tool (ggg is the keyboard shortcut), then drag through the clip to select the area you want to copy then paste... it will paste only what's selected.
Jerry

Similar Messages

How do I select all instances of a clip in the timeline at once without manually shift clicking each instance?

Title says it all!
How do I select all instances of a clip in the timeline at once without manually shift+clicking each instance?
The reason I want to do this is because I have a music video with MANY quick cuts. So clips are cut up and splattered all over the place. I am colour-correcting now and so I want to be able to select one clip everywhere it exists in the timeline so I can drag the effect onto all them at once, without having to find each instance of the clip in the timeline. This "batch select" would make it so I don't miss any instances of the clip and also saves a ton of time going through the timeline and shift clicking each time the clip turns up.
I hope PP is smart enough to do this
Thanks in advance!
-- Tim

Pick one instance of the clip, maybe even the first bit ... and use the new Master Clip feature ... here's first a written explanation and then a video tutorial on doing this ... it's a great feature.
Adobe Premiere Pro Help | Master Clip Effects
How to apply effects to all instances of a clip | Adobe Premiere Pro CC tutorials
Neil

How do I make an area of my clip colour and the rest B&W?

I heard about masking but how do I make an area of my clip colour and the rest B&W?

The filter you can use is Desaturate with Amount=100 in Image Control.
If you want to apply it to a fixed area within your clip, put a copy of the clip in V2 on top of the priginal (supposing your clip is in V1), apply Desaturate and use Crop in Motion tab of the viewer to define the edges of the rectangle; you can also use Edge Feather to smooth the borders.
If the portion you want black&white is actually a selected person or object in the clip then you must apply Chroma Keyer or 4/8 Point Matte to isolate that portion before applying Desaturate.
I hope I was clear...
Piero

I want to know how to clear the text area by the push off my next question button and ask a new ques

I want to know how to clear the text area by the push off my next question button and ask a new question - also I want to know how to code in my project to where a user can enter a math question in one border container and the answer enters into the next container
heres my code so far
<?xml version="1.0" encoding="utf-8"?>
<s:Application xmlns:fx="http://ns.adobe.com/mxml/2009"
               xmlns:s="library://ns.adobe.com/flex/spark"
               xmlns:mx="library://ns.adobe.com/flex/mx" minWidth="955" minHeight="600" backgroundColor="#1E5C75">
    <fx:Script>
        <![CDATA[
            protected function button1_clickHandler(event:MouseEvent):void
                //convert text area into labelid to be identified by actionscript
                richTextLabel.text = myArea.text;
        ]]>
    </fx:Script>
    <fx:Declarations>
        
    </fx:Declarations>
    
    <s:BorderContainer borderWeight="7" x="28" y="10" width="200" height="138">
        <s:layout>
            <s:VerticalLayout paddingTop="10" paddingBottom="10"
                              paddingLeft="10" paddingRight="10"/>
        </s:layout>
        
        <s:TextArea id="myArea" width="153" height="68"/>
        
        <s:Button width="151" label="ask a question" click="button1_clickHandler(event)"/>
    </s:BorderContainer>
    
    <s:BorderContainer borderWeight="7" x="509" y="10" width="200" height="138">
        <s:layout>
            <s:VerticalLayout paddingTop="10" paddingBottom="10"
                              paddingLeft="10" paddingRight="10"/>
        </s:layout>

        
        <s:Label id="richTextLabel" width="153" height="68"/>
        <s:Button width="151" label="next question" click="button1_clickHandler(event)"/>
    </s:BorderContainer>
    </s:Application>

This is a user to user support forum. We are all iphone users just like you.
You are not addressing Apple here at all.
This is an odd way to ask your fellow iphone users for help. Berating oterh users will not help you.
"it's too fragile"
No it is not. i have never damaged one, nor has anyone I know.
" U loose data when Ur phone is locked"
No you don't. Why do you think this?
"and there is no customer support!!! "
Wrong yet again. Apple has an 800 number and they have many retail stores and they have support articles that you can access using the search bar. Or you can contact them throgh express lane online
"but I will go back with Blackberry "
Please do.
Good ridance

How do I add album artwork in itunes 11.1.3.8? Copy and paste in artwork window on bottom right does not work.

How do I add album artwork in itunes 11.1.3.8? Copy and paste to artwork box on bottom right in get info screen does not work.

You can only join tracks when importing from a CD and likewise, the Options button is also only visible when importing from CD.
When the CD is in the drive and showing in iTunes, you will see Options, CD Info and Import CD choices. If you select Options, the Join CD Tracks option only appears when you have two or more adjacent tracks selected. See the screenshots below:
and

How do I see the duration of a clip in the timeline ?

Hi there,
How do I see the duration of a clip in the timeline ?
How do I change the duration by typing in a number (instead of dragging its ends) ?
Thanks

Tom Wolsky wrote:
Select the clip. The display at the bottom of the timeline window will tell you the clips duration.
Control-D will open the duration display in the dashboard.
Control-D is the same as right click & select "Change Duration" ?
But where is the dashboard ? Nothing pops out ! (ie no new windows appear)
Any ideas ?

IMac desktop using OS X Lion. When I type figures in a table in my email. They look straight but when I sent it, they look crooked. How to prevent it? Do I need to pre-type it on excel and copy and paste it on my email. It takes time and troublesome.

iMac desktop using OS X Lion. When I type figures in a table in my email. They look straight but when I sent it, they look crooked. How to prevent it? Do I need to pre-type it on excel and copy and paste it in my email but it takes time and troublesome.

Send the table as an attachment, either a spreadsheet (if the recipient needs to be able to edit it) or a PDF.

I just installed the new firefox for Mac OSX 10.6.8 and when I select an image on a site (right click and copy) and paste in Photoshop 5.5, the image lightens. It does not do this in Safari.

Question
I just installed the new firefox for Mac OSX 10.6.8 and when I select an image on a site (right click and copy) and paste in Photoshop 5.5, the image lightens. It does not do this in Safari.

Firefox, Safari, and PhotoShop each handle embedded color profiles differently. For an add-on that makes it easier to experiment with Firefox's color management options, you might be interested in: [https://addons.mozilla.org/en-US/firefox/addon/color-management/ Color Management :: Add-ons for Firefox]. I haven't tried it myself.

How can I select the area I want linked, to other page?

Hi,
I have been creating multiple stand alone PDF files with links to various documents within a given PDF. Up until yesterday I would select the Link Button, move my curser to the top left corner of the area to be selected, press the button and drag a box over the area I want selected. It worked great. Then BOOM, all of a sudden when I do that now it will not let me select the area I want, it will show a fixed box that appears to be snapped to a formatting line above or below the area I want. Is there a setting somewhere that might have changed?
Davey

Make sure you do not have the Snap to Grid option selected.
In Acrobat 8, it is under the View menu.

How do I see every frame of a clip on the timeline in Premier ?

There are of course times when I need to see every frame of a clip to synchronize two clips. Imagine for example that you have a two camera shoot and both cameras were looking at a clapstick, or at a strobe. I want to put both clips on the timeline and zoom in to see every frame. Now I can align the two clips fo that one specific frame of each clip is over/under each other. However, when I have zoomed into the timeline it seems I can never zoom quite enough to see every frame What do I do to be able to zoome all the way in to the timeline so I can see every frame of the clips ? I haven't actually tried this yet with CC, but did with CS6 and it wouldn't do it.

I'm not knocking the idea of using the program monitor to place markers on sync points and using that to synchronize clips. It should be a very good solution.
What I am saying is that there are times when it would be advantageous to be able to see every frame of multiple clips on the timeline. When i first tried to do that I zoomed in and it looked as if it would display all the frames. I was dissappointed to find it wouldn't. As an editor who has done a lot of resynchronizing multiple camera shoots where there is no intentional visual sync cue, i can tell you it can be a big help to be able to see the frames as if we had a strip of film on each timeline. Sometimes we need to see several frames of each clip at the same time to make a decision about which frame represents the sync point, or to make the quickest possible decision about where to start and end a dissolve, or to chose which camera to use. In a scene shot with only one camera, there is no actual sync point. The action may have progressed slightly differently between shots. Being able to see 10 or 15 frames from each shot can help to make the quickest decision about how to line up the shots and where to do the transition. Would anyone out there say it would be a bad thing if Premier Pro could display every frame when we zoom all the way in ? It seems to me that it could only help. So i request Adobe consider it as a possible future improvement.
Here is an example, the last time i tried to see every frame in Premier. I had a scene I used Maya to create, series of Tiffs. This scene shows an object appearing as if arriving through a time or dimensional portal. The scene includes plasma popping and flashing. There are two different shots of the same moment in time. The shots are frame numbered. So if I could see the frame numbers from the original tiffs on the timeline I could align the shots that way. But of course I lose the frame numbers. The overall scene is too long, and rendering time too long, especially for 3-D 1080, to render each shot from the beginning of the scene, which would make synchronizing very easy. So i needed to sync to the flashing plasma in the scene. I though I had the shots lined up using a flash. It turned out they were not the same flash. So if i did a slow dissolve between shots, the flashes form each shot would not line up in time. What I needed to do is line up several flashes happening over a couple of seconds, so I coud verify the flashes were the same flashes. There are different numbers of frames between each flash, so if I got three to line up they would have to be the same flashes. I spent a lot of time trying to get these shots lined up. If I could zoom into the time line and see evry frame I could synchronize several clips by lining up the flashes, in just a couple of minutes. To do this with markers, marking say five flashes from each of four shots, it would take several minutes to do it before being ready to do the synchronizing. It's a workable solution, but is not ideal, a compromise.

I have an image that i want to crop/use some parts and copy and paste as a title/overlay. how do i do this

This is a jpeg file but i also have it in illustrator. I friend of mine made this for me as i am not very proficient.
I want to crop/copy and paste the individual features of the panda and place it on top of a visual clip as a title, just like as if i was writing a heading.
I originally thought i could just copy and paste this from illustrator but this didn't work.
Then i thought if i get a backgroundless copy this would be able to work but that didn't either.
I have been learning premiere pro cc (my version) for the last week or so but I'm still new to video editing.
Ultimately i want the shapes of this panda to overlay a visual clip premiere pro cc
Is anyone able to help?

To change the opacity/transparency of the panda, double click it on the timeline, then go to the "Effects Controls" tab, twirl down the 'Opacity' setting, and adjust as needed.
Separating the panda:
Method 1: The easiest way would be to bring the panda into your project as 6 separate files exported from illustrator.
Method 2: If you would prefer to however cut it up manually inside of Premiere, then go to the 'Effects' tab, search for "matte" and select the "Eight-point garbage matte" effect. You can use this to isolate a feature of the panda.
Either way, you will need to stack multiple layers on top of each other in the timeline to piece together the panda again.

How to insure selected tabs are visible in JTabbedPane

Hello all,
How can you insure that the selected tab in a JTabbedPane is visible.
Here is the code:
import javax.swing.*;
import java.awt.*;
public class TabbedPaneTest extends JTabbedPane implements Runnable
public TabbedPaneTest()
super(JTabbedPane.TOP, JTabbedPane.SCROLL_TAB_LAYOUT);
} // end TabbedPaneTest constructor
public void run ()
for (int i = 1; i <= 10; i ++)
try
this.addTab(Integer.toString(i), createDefaultPanel (i));
this.getModel().setSelectedIndex(i - 1);
Thread.sleep(3000);
} // end try block
catch (Exception e)
e.printStackTrace();
} // end catch block
} // end for loop
} // end run method
private JPanel createDefaultPanel (int index)
JPanel defaultPanel = new JPanel ();
defaultPanel.setBorder(BorderFactory.createTitledBorder(BorderFactory.createLoweredBevelBorder(), Integer.toString(index)));
return defaultPanel;
} // end createDefaultPanel method
public static void main (String args [])
JFrame frame = new JFrame ();
TabbedPaneTest tpt = new TabbedPaneTest ();
frame.getContentPane().add(tpt);
frame.setSize(200, 200);
Thread newThread = new Thread (tpt);
newThread.start();
frame.setVisible(true);
} // end main method
} // end TabbedPaneTest class
I've crated a JTabbedPane with the tabLayoutPolicy set to JTabbedPane.SCROLL_TAB_LAYOUT.
If I add enough tabs the scroll buttons appear but the newly adde tab is hidden behind them,
even though I have set the selection index to the added tab. The content of the panel associated
with the tab is visible but the tab itself is hidden.
So the selected tab is hidden behind the scroll buttons.
Any one know how to insure that if a tab is selected it is visible to the user.
Thanks

This is an interesting question so I tried it out. After some poking around to see how Swing does this for mouse clicking (try setting things up so that a tab is only partially visible and then click on the visable part - notice how the whole tab is scrolled into view) I found this:    /**
     * This inner class is marked "public" due to a compiler bug.
     * This class should be treated as a "protected" inner class.
     * Instantiate it only within subclasses of BasicTabbedPaneUI.
    public class TabSelectionHandler implements ChangeListener {
        public void stateChanged(ChangeEvent e) {
            JTabbedPane tabPane = (JTabbedPane)e.getSource();
            tabPane.revalidate();
            tabPane.repaint();
            if (tabPane.getTabLayoutPolicy() == JTabbedPane.SCROLL_TAB_LAYOUT) {
                int index = tabPane.getSelectedIndex();
                if (index < rects.length && index != -1) {
                    tabScroller.tabPanel.scrollRectToVisible(rects[index]);
    }Which is called when the selected tab changes. The member theScroller is a private inner class that handles the scrolling tabs. The call to scrollRectToVisible is executed for each of your new tabs. Sometimes when I stopped in the debugger and then continued things worked and your new tab scrolled into view.
So I tried putting your code into a Runnable class and invoked it later:          final int newIndex = i;
          SwingUtilities.invokeLater (new Runnable () {
               public void run () {
                    addTab(Integer.toString(newIndex), createDefaultPanel (newIndex));
                    getModel().setSelectedIndex(newIndex - 1);
          });But that did not work. That is as far as I got so far and I have to stop now. Perhaps this can inspire someone else to a solution.
IL
PS. I first tried Rammensee's solution and it did not work.
Rammensee, you said you hoped you had it right - perhaps you are close.

How can I select an area of a picture (larger than one pixel) and find the average RGB values of all the pixels contained inside the area?

I'm analysing the differences between several different images and I would like to select a large area of each (such as with lasso tool) and find the average RGB value of all of the pixels within the selection area made/

With the selection you could do a copy paste and use the histogram of the new layer set the histogram source to selected layer. The eye dropper sample size may also to get the average of a square area around a point.

How do you select an item from a table indicator with a mouse click and then use that selection in code?

Hi,
I am displaying a list of filesfrom a directory in a table on the front panel of a VI as part of a program I am developing. I would like the user to be able to select from that table so that particular file can be processed. Is there a way to do this?
Thanks,
Aaron

you'll find that most of the useful functionality of the labview user control interface is hidden within the property node and invoke node functions. just right click a control or indicator terminal on the block diagram and mouse over to create, then to property node or invoke node. lots of fun stuff in there. attached is an example. one file is saved for labview 8.0, the other is saved for labview 8.6.
Message Edited by Root Canal on 10-16-2008 11:17 AM
global variables make robots angry
Attachments:
file selection table.vi ‏26 KB
file selection table lv 8.0.vi ‏42 KB
file selection table.PNG ‏18 KB

How to run selected sequences/steps after the great-grandparent, the grandparent and the parent sequence ?

Hi,
I developped a sequence file with many levels of interlinked subsequences, and I want to be able to run selected subsequences/steps after the great-grandparent, the grandparent and the parent sequence.
Anyone know the best method to do this ?

Indeed, there was an little error in the sequence file. You can find the corrected file in attachment.
Run the selected step "Grandparent 2" doesn't do what I require because this run all sequences under "Grandparent 2", while I want to run "Parent 2.2" and "Child 2.2.2" under "Grandparent 2".
Attachments:
sample.seq ‏10 KB

How do I select an area on a clip in a timeline and copy and paste it ..

Similar Messages

Maybe you are looking for