How do I select between a PCI and a PXI device

I want to contrast the specifications and usage of PCI 6025E/PXI 6025 E.

These cards are functionally equivalent. The only difference is the form factor. The PCI-6025E is a standard PCI card designed to be used in a standard PC or workstation. The PXI-6025E is a 3U CompactPCI card designed to be used in a PXI chassis. PXI systems are functionally very similar to a standard PCs, however they do offer some high performance timing features, and are designed to be used when durability and reliability are paramount. Instead of deciding which card to get, you should first decide which platform you want to use and then choose the appropriate card.
If you want to take measurements across all 4 cylinders or take multiple measurements from one cylinder and synchronizatio
n of the samples is important (closer than 5us or so), then you may want to look into one of the simultaneous sampling DAQ cards instead of the 6025. If exact synchronization of measurements across multiple sensors is not critical, then the 6025 would work well.
Regards,
Brent R.
Applications Engineer
National Instruments

Similar Messages

In Mountain Lion how does OS select between ethernet and WiFi when both are activated??

In Mountain Lion how does OS select between ethernet and WiFi when both are activated?? How does OS use "both" networl accesses??

It will pick the highest service in the list which has an internet connection.
To order the list, open Network System Preferences and select Set order of network services from the button below the service list.

How do I get my 8600 premium printer to auto select between tray 1 and tray 2?

How do I get my 8600 premium printer to auto select between tray 1 and tray 2? Right now, i have to pull out tray 1 to get the printer to feed tray 2.

Hi Retrotriker,
Follow the steps below to properly configure your paper trays.
1. Touch (right arrow), touch Setup, touch Preferences, and then select Default Tray
2. Select Tray 2 as the Default tray
3. Open Printers and Faxes
4. Right click on printer, and then select Printer Properties
5. Click on Device Settings tab
6. On this screen set the media type you have assigned to each tray (Example: tray 1 - Envelopes & Tray 2 - Letter)
7. Click Apply, and then Ok
8. When you have an envelope you are printing it will pull from Tray 1
9. When you have a letter you are printing it will pull from Tray 2
I am an HP employee.
Say Thanks by clicking the Kudos Star in the post that helped you.
Please mark the post that solves your problem as "Accepted Solution"

How to provide joins between oracle tables and sql server tables

Hi,
I have a requirement that i need to generate a report form two different data base. i.e Oracle and Sql Server.
how to provide joins between oracle tables and sql server tables ? Any help on this
Regards,
Malli

user10675696 wrote:
I have a requirement that i need to generate a report form two different data base. i.e Oracle and Sql Server. Bad idea most times. Heterogeneous joins do not exactly scale and performance can be severely degraded by network speed and b/w availability. And there is nothing you can do in the application and database layers to address performance issue at the network level in this case - your code's performance is simply at the mercy of network performance. With a single glaring fact - network performance is continually degrading. All the time. Always. Until it is upgraded. When the performance degradation starts all over again.
If the tables are not small (few 1000 rows each) and row volumes static, I would not consider doing a heterogeneous join. Instead I would rather go for a materialised view on the Oracle side, use a proper table and index structure, and do a local database join.

How can I distinguish between the first and the rest in Smartforms??

I have made an Invoice in Smartform. I have to take three copies of that. In the first copy it will be printed "ORGINAL INVOICE" and in the next copies it will print "Duplicate copy". How can I distinguish between the first and the rest in Smartforms??
Regards,
Subhasish

>
Subhasish Ganguly wrote:
> I have made an Invoice in Smartform. I have to take three copies of that. In the first copy it will be printed "ORGINAL INVOICE" and in the next copies it will print "Duplicate copy". How can I distinguish between the first and the rest in Smartforms??
Hello Vamshi,
As per the OP's requirement he has to print 3 copies of the invoice. Which according to my understanding should be printed at the same time ? May be i am wrong in interpreting this.
You must be knowing you can control the print params of the SmartForms in CONTROL_PARAMETERS where you set the NO_DIALOG & in the OUTPUT_OPTIONS pass the number of copies.
I think the solution you have proposed the "Original Copy" will be printed only once. (Correct me if i am wrong)
Every time the user prints the invoice again he will be getting a "Duplicate Copy". If this is what the OP wants the logic is perfect
Cheers,
SUhas

I am new to Apple; how do i toggle between the pc and and overhead projector? Which keys?

I am new to Apple; how do I toggle between the pc and an overhead projector? Which keys?

Not sure how your question relates to an AirPort Extreme, AirPort Express or Time Capsule......these products:
It appears that you have a question about a MacBook Air. If that is the case, then please post your question in the support area for the MacBook Air linked below:
MacBook Air

HT4972 i have iphone 3gs v 4,2.1 i want to upgrade to ios 5 i will erase all data, how can i install again the software, and now my device can not detect to my computer? what can i do? please help me..

have iphone 3gs v 4,2.1 i want to upgrade to ios 5 i will erase all data, how can i install again the software, and now my device can not be detect to my computer? what can i do? please help me..

You can not install iOS 5. It is no longer signed by Apple. You can only install the current version of iOS. For a 3GS, that's 6.1.3.
However... if you have 4.2.1 on your phone, odds are it is not a 3GS, it is a 3G. If that's the case, you've reached the end of the road for that. It can not run anything higher than 4.2.1.

HT6337 Allow handoff between this mac and your iCloud devices not showing up in general preferences

Is anyone not seeing this? the Allow handoff between this mac and your iCloud devices not showing up in general preferences
Imac 2011 21" mid 2011

nevermind, Just figured out that my iMac does not support it. Thanks Apple, once again coming up with stupid functionality that only works when you pay more money. 3yr old machine, I guess I need to send it to scrap heap.

How to implement Select Between clause? ..help

Hi
I want to implent typical select between clause in the mappings. It is like i want to check whether the "Given date" exists between the range of dates. The range of dates is obtained from the various dimension tables. I dont know how implement that. please help.
Typical SQL query would be ....
and A."Month End Date" between dim.efcv_bgdt and dim.efcv_endt
and A."Month End Date" between dim2.efcv_bgdt and dim2.efcv_endt
and A."Month End Date" between dim3.efcv_bgdt and dim3.efcv_endt
and so on..............................
***************************************************************

Hi
Use a joiner operator and connect dim1, dim2, dim3 to it and in the join expression use your netween expression.
Or do you want to use the between in the select clause? Then use an expression operator and define a case when ... between ... and ... then ... else ... expression.
Ott Karesz
http://www.trendo-kft.hu

How to implement BINDING between drawing shapes and properties?

See this background info:
Can we have BINDING between drawing shapes and properties?
This needs more specific info. My application reads a number of XML files, and places the data in an Excel worksheet. Let's say that there are 20 XML files, the app creates 20 lower tabs (spreadsheets) named: "Item 1", "Item 2", ...,
"Item 20".
That is the current version. I am told by the users, however, that in some cases there are some XML files which create more than 1 Excel lower tab. For example, the file: "Items 8-11.xml" needs to fill tabs 8, 9, 10 and 11.
In that particular case the user will modify the default map (a 45-degree diagonal, equivalent to the
identity function F(x) = x), by clicking around. The resulting new map will look as follows:
Since the number of XML files does not change, the number of rows is constant. However, each time a black square is moved from its canonical (45-degree) location, a spreadsheet becomes "orphan" and therefore the application must create a new Excel
lower tab (which is a grid column). IOW: The number of columns keeps on growing to the right.
List<Model>
I figure that (as opposed to DataGrids which grow and shrink vertically, which each Model being 1 row) this thing should use the column as fundamental Model.
Before running the main app (the XML file reading procedures), the user will select a menu item named "Configure XML to Excel Mapping" and an interface similar to the image above will be shown.
In addition to the property binding, which has been discussed, how should I implement the drawing and erasing of black and white squares? I guess I will need some sort of "ConvertTo" bidirectional bridge from/to boolean and square drawing?

You lost me with the xml file and the tab and the wossname to the thingummybob.
I don't follow the explanation, sorry.
The way to show stuff like that isn't dependent on how the data is stored where though.
I probably wouldn't draw them, as such.
I'd probably just make each a usercontrol which bound the fill brush of a rectangle for the black white bit and used a border for the outline.
To simplify that:
<Grid> <Border>
<Rectangle Fill={Binding FillBrush}"/>
</Border>
</Grid>
FillBrush
Would be a public property solidcolorbrush exposed from your cellvm
using System;
using System.Collections.Generic;
using System.Linq;
using System.Text;
using System.Threading.Tasks;
using System.Windows.Media;
using GalaSoft.MvvmLight;
namespace wpf3
public class CellVM : ViewModelBase
private SolidColorBrush fillBrush;
public SolidColorBrush FillBrush
get { return fillBrush; }
set
fillBrush = value;
RaisePropertyChanged();
You can then have some logic somewhere which tells that viewmodel to show black or white fill. Which would be that converter bridge thingy equivalent. This thing is true then FillBrush = whiteBrush else FillBrush = blackBrush.
You could probably do it with just rectangle, lose the border and set the Stroke on the rectangle.
The stroke is the outside line round a rectangle ( or any shape).
https://msdn.microsoft.com/en-us/library/system.windows.shapes.shape.stroke(v=vs.110).aspx
And you would of course do other stuff like sizing the usercontrol and arranging an list in a list as I explained in your other thread.
Oh.................
But to answer the question in the title.
Yes you can bind all sorts of things including the point making up a polygon, brush used to draw the line and all sorts. You could even do flashing cells if you wanted.
Hope that helps.
Recent Technet articles: Property List Editing;
Dynamic XAML

How to outline selected cells during drag and drop in the jtable

Hi,
I have spent a lot of time to find out how to outline selected cells during drag in the jtable, but I did not find the answer.
Can anybody give me a tip, where to read more about this problem or even better, give an example...
I have the following situation:
1.Table has 10 rows and 10 columns
2.setSelectionMode(ListSelectionModel.SINGLE_INTERVAL_SELECTION) and setCellSelectionEnabled(true)
3.user select 5 cells in 4th row (for example cell45,cell46,cell47,cell48 and cell49)
4.user starts dragging. During dragging an outline should be drawn. Outline should be a rectangular with width of 5 cells and height of one cell. Outline should move according to the mouse position.
5.rectangular disappears when dropped
Regards,
Primoz

In "createTransferable" you can create a drag image
which you can paint in "dragOver" and clear in "drop" method of DropTarget :
package dnd;
* DragDropJTableCellContents.java
import javax.swing.*;
import javax.swing.border.*;
import javax.swing.table.*;
import java.awt.*;
import java.awt.datatransfer.*;
import java.awt.dnd.*;
import java.awt.event.*;
import java.awt.image.BufferedImage;
import java.io.IOException;
public class DragDropJTableCellContents extends JFrame {
    public DragDropJTableCellContents() {
        setTitle("Drag and Drop JTable");
        setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
        getContentPane().add(createTable("JTable"), BorderLayout.CENTER);
        setSize(400, 300);
        setLocationRelativeTo(null);
    private JPanel createTable(String tableId) {
        DefaultTableModel model = new DefaultTableModel();
        for (int i = 0; i < 10; i++) {
            model.addColumn("Column "+i);
        for (int i = 0; i < 10; i++) {
            String[] rowData = new String[10];
            for (int j = 0; j < 10; j++) {
                rowData[j] = tableId + " " + i + j;
            model.addRow(rowData);
        JTable table = new JTable(model);
        table.getTableHeader().setReorderingAllowed(false);
        table.setSelectionMode(ListSelectionModel.SINGLE_INTERVAL_SELECTION);
        table.setCellSelectionEnabled(true);
        JScrollPane scrollPane = new JScrollPane(table);
        table.setDragEnabled(true);
        TableTransferHandler th = new TableTransferHandler();
        table.setTransferHandler(th);
        table.setDropTarget(new TableDropTarget(th));
        table.setAutoResizeMode(JTable.AUTO_RESIZE_OFF);
        JPanel panel = new JPanel(new BorderLayout());
        panel.add(scrollPane);
        panel.setBorder(BorderFactory.createTitledBorder(tableId));
        return panel;
    public static void main(String[] args) {
        new DragDropJTableCellContents().setVisible(true);
    abstract class StringTransferHandler extends TransferHandler {
        public int dropAction;
        protected abstract String exportString(JComponent c);
        protected abstract void importString(JComponent c, String str);
        @Override
        protected Transferable createTransferable(JComponent c) {
            return new StringSelection(exportString(c));
        @Override
        public int getSourceActions(JComponent c) {
            return COPY;
        @Override
        public boolean importData(JComponent c, Transferable t) {
            if (canImport(c, t.getTransferDataFlavors())) {
                try {
                    String str = (String) t.getTransferData(DataFlavor.stringFlavor);
                    importString(c, str);
                    return true;
                } catch (UnsupportedFlavorException ufe) {
                } catch (IOException ioe) {
            return false;
        @Override
        public boolean canImport(JComponent c, DataFlavor[] flavors) {
            for (int ndx = 0; ndx < flavors.length; ndx++) {
                if (DataFlavor.stringFlavor.equals(flavors[ndx])) {
                    return true;
            return false;
    class TableTransferHandler extends StringTransferHandler {
        private int dragRow;
        private int[] dragColumns;
        private BufferedImage[] image;
        private int row;
        private int[] columns;
        public JTable target;
        @Override
        protected Transferable createTransferable(JComponent c) {
            JTable table = (JTable) c;
            dragRow = table.getSelectedRow();
            dragColumns = table.getSelectedColumns();
            createDragImage(table);
            return new StringSelection(exportString(c));
        protected String exportString(JComponent c) {
            JTable table = (JTable) c;
            row = table.getSelectedRow();
            columns = table.getSelectedColumns();
            StringBuffer buff = new StringBuffer();
            for (int j = 0; j < columns.length; j++) {
                Object val = table.getValueAt(row, columns[j]);
                buff.append(val == null ? "" : val.toString());
                if (j != columns.length - 1) {
                    buff.append(",");
            return buff.toString();
        protected void importString(JComponent c, String str) {
            target = (JTable) c;
            DefaultTableModel model = (DefaultTableModel) target.getModel();
            String[] values = str.split("\n");
            int colCount = target.getSelectedColumn();
            int max = target.getColumnCount();
            for (int ndx = 0; ndx < values.length; ndx++) {
                String[] data = values[ndx].split(",");
                for (int i = 0; i < data.length; i++) {
                    String string = data;
if(colCount < max){
model.setValueAt(string, target.getSelectedRow(), colCount);
colCount++;
public BufferedImage[] getDragImage() {
return image;
private void createDragImage(JTable table) {
if (dragColumns != null) {
try {
image = new BufferedImage[dragColumns.length];
for (int i = 0; i < dragColumns.length; i++) {
Rectangle cellBounds = table.getCellRect(dragRow, i, true);
TableCellRenderer r = table.getCellRenderer(dragRow, i);
DefaultTableModel m = (DefaultTableModel) table.getModel();
JComponent lbl = (JComponent) r.getTableCellRendererComponent(table,
table.getValueAt(dragRow, dragColumns[i]), false, false, dragRow, i);
lbl.setBounds(cellBounds);
BufferedImage img = new BufferedImage(lbl.getWidth(), lbl.getHeight(),
BufferedImage.TYPE_INT_ARGB_PRE);
Graphics2D graphics = img.createGraphics();
graphics.setComposite(AlphaComposite.getInstance(AlphaComposite.SRC_OVER, 1f));
lbl.setBorder(BorderFactory.createLineBorder(Color.LIGHT_GRAY));
lbl.paint(graphics);
graphics.dispose();
image[i] = img;
} catch (RuntimeException re) {
class TableDropTarget extends DropTarget {
private Insets autoscrollInsets = new Insets(20, 20, 20, 20);
private Rectangle rect2D = new Rectangle();
private TableTransferHandler handler;
public TableDropTarget(TableTransferHandler h) {
super();
this.handler = h;
@Override
public void dragOver(DropTargetDragEvent dtde) {
handler.dropAction = dtde.getDropAction();
JTable table = (JTable) dtde.getDropTargetContext().getComponent();
Point location = dtde.getLocation();
int row = table.rowAtPoint(location);
int column = table.columnAtPoint(location);
table.changeSelection(row, column, false, false);
paintImage(table, location);
autoscroll(table, location);
super.dragOver(dtde);
public void dragExit(DropTargetDragEvent dtde) {
clearImage((JTable) dtde.getDropTargetContext().getComponent());
super.dragExit(dtde);
@Override
public void drop(DropTargetDropEvent dtde) {
Transferable data = dtde.getTransferable();
JTable table = (JTable) dtde.getDropTargetContext().getComponent();
clearImage(table);
handler.importData(table, data);
super.drop(dtde);
private final void paintImage(JTable table, Point location) {
Point pt = new Point(location);
BufferedImage[] image = handler.getDragImage();
if (image != null) {
table.paintImmediately(rect2D.getBounds());
rect2D.setLocation(pt.x - 15, pt.y - 15);
int wRect2D = 0;
int hRect2D = 0;
for (int i = 0; i < image.length; i++) {
table.getGraphics().drawImage(image[i], pt.x - 15, pt.y - 15, table);
pt.x += image[i].getWidth();
if (hRect2D < image[i].getHeight()) {
hRect2D = image[i].getHeight();
wRect2D += image[i].getWidth();
rect2D.setSize(wRect2D, hRect2D);
private final void clearImage(JTable table) {
table.paintImmediately(rect2D.getBounds());
private Insets getAutoscrollInsets() {
return autoscrollInsets;
private void autoscroll(JTable table, Point cursorLocation) {
Insets insets = getAutoscrollInsets();
Rectangle outer = table.getVisibleRect();
Rectangle inner = new Rectangle(outer.x + insets.left,
outer.y + insets.top,
outer.width - (insets.left + insets.right),
outer.height - (insets.top + insets.bottom));
if (!inner.contains(cursorLocation)) {
Rectangle scrollRect = new Rectangle(cursorLocation.x - insets.left,
cursorLocation.y - insets.top,
insets.left + insets.right,
insets.top + insets.bottom);
table.scrollRectToVisible(scrollRect);
Edited by: Andre_Uhres on Nov 18, 2007 10:03 PM

How do I select a playlist to copy onto my devices? On the older version, I could click on each list, then check "sync only checked playlists" and I'd have different playlists on different devices. How do I do it with this version? Thank you!

How in 12.1.0.50 can I select a playlist to copy onto my devices from my iMac? On the older version, I could click on each list, then check "sync only checked playlists" and I'd have different playlists on different devices (iPhone 6, iPod nano). How do I do it with this version? Thank you!

Same way.
Select the device, click Music tab and select the playlists to sync.

How to share music between my ipad and iPhone

How to share music between iPad and iPhone

Sync both devices to the same iTunes Library on your computer. Or just re-download iTunes Store purchased music from the Purchased tab in iTunes using the same AppleID.

How to create dblink between oracle 10G and mysql

I want to create dblink between oracle 10G and mysql
I create it in ECC6.0 using DBCO transaction tcode,which database type can choose?Microsoft sql server?Because there have no mysql item.
I choosed MSS so that I can test it, but it failed,there is an error that 'ORA-12569:TNS:packet checksun failure'.
I configured the oracle tnsnames.ora file like this:
     CW.WORLD =
           (DESCRIPTION =
                (ADDRESS_LIST =
                      (ADDRESS =
                              (COMMUNITY = SAP,WORLD)
                              (PROTOCOL = TCP)
                              (HOST = XX.XX.XX.XX)
                              (PORT = XXXX)
               (CONNECT_DATA =
                    (SID = XXX )
               (HS = ok )
When I tnsping CW,it will fail,like this " TNS-12569:TNS:packet checksum failure"
How can I do.

I want to know if this possible?

Difficulty in selecting between HV segmentation and classical(LV) segmentat

Hi All,
I am in a dilema to select between the HV seg. or the old LV one. Can anyone tell me is it feasable to work on LV segmentation with 20million plus BPs.We need it only for BP segmentation.Will the performance be affected drastically if we use LV seg.I am just trying to understand the pros and cons of both the solutions(i.e, hv and lv seg). It would be great if someone can give me more clarity on this so that we can choos ethe right solution for our client.
thanks!

Hi,
starting with CRM 7.0 EhP1 there will be one single UI for HV and LV. You decide via the usage which one is used. However, if you want to use HV segmentation, you must have a TREX server up and running, whereas LV runs without. I dont know exactly what you mean by "Is there any such capacity for LV seg to be used". HV segmentation will always be faster.
Best Regards
--klaus

How do I select between a PCI and a PXI device

Similar Messages

Maybe you are looking for