How do I select/change the status of my post/reply?

Hello,
I'm fairly new to the forum and I'm finding it challenging to figure out how to use all the features in a straight forward manner.
For instance, I've noticed on my recent reply to one of my post questions that the status automatically showed up as "this solved my question". I did not select this status and I did not see any place to select the status of my reply. I went back to edit the reply status immediately and still saw no way to change it.
The fact is, that my reply was not in relation to solving my question at all. I replied to someone who offered a solution and I was replying as to the results of that solution, which did not solve my issues, it just created different issues. So now my post shows as solved when my question hasn't been answered and the issue is not solved.
The probabability that my question above has been asked ad infinitum is better than good, I suspect. But when I search the quesiton in the search communities box I don't get a clear answer. Please do excuse me then, if I am repeating an over asked question. I'm not even sure I'm searching the forum correctly or if there are other options to search in addtion the search box in the upper right hand corner....
Honestly, I've been on a lot of forums and am an active member of several, I'm a fairly advanced mac user, having been a mac guy for decades, and this forum doesn't appear to be very clear or easy to figure out how to use to me. It feels as if they're almost trying to discourage you from figuring some things out...weird. I've been searching for a clear answer for this for an hour now--trying different queries and different parts of the forum.
Any help with how to select and change post and reply staus would be much appreciated.

These buttons that you show were not on the post I replied to in my thread.
You will see the buttons only, if you are the original poster of the thread, not if you asked a question in thread, that someone else started. Also, you will not see these buttons, if you already markes answers as solved or helpful. You can mark two answers as "Helpful" and one answer as "Solved". Afterwards the buttons will vanish, see "Answering to Questions".
Another question that comes up is, if I fail to select either button and simply reply to the post without selecting anything, what happens then?
Then the buttons will stay, until you mark an answer. You are not obliged to mark every answer. It is up to you, how you rate the answers you receive.
You may want to have a look at the tutorials on the main page of the ASC: https://discussions.apple.com/static/apple/tutorial/index.html
Regards
Léonie

Similar Messages

How to change the Status CRTD of the Inspection Lot?

Dear all.
I want to Complete an Inspection Lot 10000000005 In the T-CODE qvm2.When I select the Inspection Lot 10000000005 and press F8 to Complete the Inspection,the SAP show an error message "Status check error".
And the detail info show that the error was cause by the Status CRTD of the Inspection Lot.I check the Status of the Inspection Lot 10000000005 and found that it's Status was CRTD CHCR SPRQ.My question was how to change the Status CRTD of the Inspection Lot?
Regard
Yoda

Hi
CRTD means ...
In material master QM vew-inspection setup->Inspect with task list tick is there.
Now to change status,
Go to Qp01>create a task list for material(If not exists)>remember date of creation of task list must be prior to date to creation of inspec lot
If task list is created/exists>go to QA02.<inspection specification -->click on Inspec Spec
and attach task list
go to sample tab....click on sample.
Now save it.
Status will change to REL
Regards
Sujit

How to change the status in the table kssk

Hi ,
In document management system - for a doc type pdf, I am maintaing the class (cl_xxx) in img setting. some charateristics are assigned to that class (with entry required).
My problem is While creating the document (cv01n). I am not assigning the value for that char ( i.e in addition data), eventhough it is mandatory .
In the table kssk , For that particular document , status is set to 5 . how to change the status .
note :
In cv04n - if i search wrt to that charateristic in the classification tab. i am not able to get the value.
Please help me to solv the problem.
Regards,
Rani.

hi you can do like this also if it is a test server..and y had the authoridation..
togo the table -supposekkkk-execute-select a particular record--double click it ---then it will display it in the vertical line..
then put /h in the tcode listbox and put enter--debugg it and change this if code = 'SHOW' as EDIT. execute it and change it and save it..
regards,
venkat.

How can I change the status of the fileupload UI from disable to enable?

Hi, experts,
The Version of my Netweaver studio is 7.0.11.
I create a view with fileupload UI element in WebDynpro for Java application, but the fileupload UI element is disabled so that I don't select file when I click the button in the fileupload UI element after I run the application.
How can I change the status of the fileupload UI element from disable to enable?
Best regards,
tao

Hi
look at this thread [HI Masters , I need information for file upload program in web dynpro java|HI Masters , I need information for file upload program in web dynpro java]
and check if u bind each file upload element to binary property in the context

How to change the status of clinical order header

Hi all,
I need to change the status (N1CORDER-WLSTA) of the clinical order header. I have found the way to change the status of the items and it works, but i dont know how to change the header status.
Now, for the items i do:
1- Create an object type cl_ishmed_prereg
2- Load the item (n1vkg-vkgid)
3- Use set_status method
4- Save the object
5- Commit work
So, do you know how i can change the status of the header? Im looking for other methods but...
Thanks,
Manel

In order to change the clinic order header status u have to:
1- Obtain the instance from item instance:
    CALL METHOD lv_prereg->get_corder
      IMPORTING
        er_corder = lv_corder
        e_rc      = rc.
2- Create a var type rn1_corder_x
3- Modify:
is_n1corder_x-wlsta = 'RE'. " new status
is_n1corder_x-wlsta_x = 'X'.
4- Use change mehod:
    CALL METHOD lv_corder->change
      EXPORTING
        is_corder_x     = is_n1corder_x
      IMPORTING
        e_rc            = rc
      CHANGING
        cr_errorhandler = cl_error.
5- Save:
CALL METHOD lv_corder->if_ish_objectbase~save
6- Commit work
Regards,
Manel

How to change the status of a production order

Dear All,
May i know how to change the status of a production order.I want to de-active the status like OPGN (Operation generated).This status is updated as there was no routing assigned to that particular production order during its creation
Thanks and Regards,
Varun Siddharth

Dear,
When you create a production order, an operation created by the system is generated automatically if no routing is used for the creation. As a result the order header receives the status HOGAN; the operation created automatically also has this status.
If you delete the operation created automatically and then do not have the status HOGAN.
To avoid this maintain the Routing for the material or delete the setting of default operation from OPJG.
Regards,
R.Brahmankar

How to change the status of an incident, after it is "Confirmed"

Hi, I'm new to ITSM and the client asking me how he can change the status of an incident, after he change it to "Confirmed". Is there a way to change the status of an incident after it is set to "Confirmed"? Or can I change the configuration of the Status field to allow that change?
Thank you

hi
I dont think, you can reopen the confirmed ticket by standard, but please try with the report CRM_SOCM_SERVICE_REPORT.
if not try with the status profile customization, remove the FINI settings from the confrimed status also change the highest and low values also accordingly.
please try.
Thanks
Jansi

How to change the status value?

Hi Experts
We landed in the starnge situation. We defined a multi task EE Monitor activity to change the status attribute to past due when particular internal event code is overdue. We forgot to assign the correct EE monitor Activity to EE Profile and the report /SAPTRX/EE_MONITOR converted the internal event code to overdue but did not change the status to past due for lakhs of records.
Now we assigned the correct EE Monitor activity to the EE profile. How do we change the status to past due for already processed records? Is there any standard program available for this purpose or shall we need to write any custom program for it?
Your quick response is much appreciated.
Thanks
Ravi

Hi Ravi,
the coding in the EE Mon activity SET_STATUS can be used as template. The method is unfortunately protected.
It depends if you use EE History (Setting in EH Type Customizing). If yes it is importatnt to update also EE History table and the counter in the EH header for the History.
Maybe the easiest way would be to send with a report messages to the EH and do the update in the rule set with the standard activity.
You could use a new event code and react on it in the rule set.
Best regards,
Steffen

How to change the status of Serial number

Hi Experts,
Would you please help in solving this problem.
How to change the status of Serial number?
I have material stock in a storage location: recieved from Intercompany through outbound delivery, when PGIed material document is created when I am checking the serial numbers of the recieved ones status of the serial numbers are ESTO, I want that into AVLB.
How can we do that?
Regards
Sri

Hi,
Go to IQ02 on Header tool bar you will find edit(2nd option on header tool bar) => edit manually=> Click from Customer=> and then to Stock you will find the expected results...
Generally Serial number Status use to change along with the movement of material linked with that serial number... So if you are changing serial number with manual trasaction then please remove all the details from IQ02 like plant storage location Batch and master batch so that i will not provide you error while doing next transactions.
Regards,
Ninad Kshirsagar

How to change the status of updated record?

Hi All,
how to change the status of updated record?
new record should be active version(X) and old version will be deleted.
Plz suggest..
Thanks in advance...

Steve,
In the actual question, you mentioned that the old record needs to be deleted and hence the solution provided.
Now, you are talking about field. May I know which field are you talking about??
Jst get in to ABAP Editor and try debugging the code with the solution provided and let us know if that is working fine or not.
Also, I recommend you to take a look at the transaction ABAPDOCU. There you wil find hell lot of examples explaining all the scenarios. You will get a good idea .
Please check that and try to implement it yourself. You will be able to make it after doing mistakes.
If you stuck up again after many attempts, paste your code here. We will help you out
Hope you got my concern.
Thanks,
Babu Kilari

How to change the status of IDOCS from 29 status to 53

Guys
how to change the status of IDOCS from 29 status to 53
Thanks in advance

Hi Krishna
IDOC_STATUS_CONVERT Use this FM and reward me

How to change the status of test cases in Test Plan from Design to Ready using Excel VBA

HI,
How to change the status of test cases in Test Plan from Design to Ready using Excel VBA

Thanks Florin,
Your piece of code has worked alot, and it was very helpful in changing the Status of the Workitem to "READY" for all the Users fo the workitem.
Points have been rewarded for your help.
Process: We have acheived this using the "Work Item Exits", Usng "AFTER_EXECUTION" Method.
Note: The Exit will be executed if "exit_cancelled" statement is present/used in the work item method. if not it is not taking to the exit code. I'm unable to find the reason for it. Florin can u please explain this point.
Please check the link for adding the code in Work Item Exits.
http://wiki.sdn.sap.com/wiki/display/ABAP/ProgramExitsIn+Workflow
Please find the Code:
method IF_SWF_IFS_WORKITEM_EXIT~EVENT_RAISED.
Get the context of the workitem
me->wi_context = im_workitem_context.
After execution of the workitem call the method AFTER_EXECUTION
if im_event_name eq swrco_event_after_execution.
    me->after_execution( ).
endif.
endmethod.
METHOD AFTER_EXECUTION.
This method acts as the Event Handler for SWRCO_EVENT_AFTER_EXECUTION
DATA: LCL_L_WID TYPE SWW_WIID,
        L_STATUS TYPE SWR_WISTAT-STATUS,
        L_NEW_STATUS TYPE SWR_WISTAT,
        L_SWR_MESSAG TYPE STANDARD TABLE OF SWR_MESSAG,
        L_SWR_MSTRUC TYPE STANDARD TABLE OF SWR_MSTRUC.
Get work item
CALL METHOD WI_CONTEXT->GET_WORKITEM_ID
    RECEIVING
      RE_WORKITEM = LCL_L_WID.
L_STATUS = 'READY'.
CALL FUNCTION 'SAP_WAPI_SET_WORKITEM_STATUS'
    EXPORTING
      WORKITEM_ID    = LCL_L_WID
      STATUS         = L_STATUS
      USER           = SY-UNAME
      LANGUAGE       = SY-LANGU
      DO_COMMIT      = 'X'
    IMPORTING
      NEW_STATUS     = L_NEW_STATUS
     RETURN_CODE    = SY-SUBRC
    TABLES
      MESSAGE_LINES = L_SWR_MESSAG
      MESSAGE_STRUCT = L_SWR_MSTRUC.
IF SY-SUBRC EQ 0.
ENDIF.
ENDMETHOD.
Thank You Once Again,
Ajay Kumar Chippa

How do you change the status of a survey in CRM_SURVEY_SUITE?

Hi,
How do you change the status of a survey in CRM_SURVEY_SUITE, e.g. from Activated to not?
Thanks!

Hello Anne,
I would like to suggest you that once you have created any survey and activated it there is no such option to deactivate it.
The only option is that if you go and edit the survey then it deactivate the survey and creates a new version of the same.
thanks
Willie

How to change the status of a process chain

Hi,
I went through Siegfried's blog and knew how to restart a process chain at a failed step which doesn't have "Repeat" option.
But is there any other function module through which we can change the "Actual State" of the process chain, in siggi's method we can change only the "i_state" of a particular process but not the "Actual State"(refer to RSPCPROCESSLOG table) of the process chain.
Please do give your suggestions if there is any way to change the "Actual State" of a process chain.
Regards

hey Vamshi,
We can directly change the status of the process chain.
there is a specific way to do it, you can go in se38 and change the status from one to another ...go to se38 .... type....rspcprocessmonitor*.........presss f4...
you will get a standard program ..
now go to this program ...and give the set of inputs .... like PID and all from RSPCPROCESSLOG table ..
and in the state give the state you want and press f8.
this should work.
Assign points if it answers your queries.
Thanks,
Dennis

How to disable other users from changing the status

Hi,
The status entry field can be changed irrespective of ownership in Documents.
I was able to change the status on the document created by other user.
Example: The status of document was In-Work. The document owner was X. But I was able to change it to Inspection Check.
How to disable other users from changing the status?
Regards,
Shashi

This is a frequently discussed topic.Please use the search feature.It has been discussed in [previous posts|CV01N: Filter documents by role; in various contexts.
Regards,
Pradeepkumar Haragoldavar

How do I select/change the status of my post/reply?

Similar Messages

Maybe you are looking for