How do I select channel and router

I am in a place with 9 same name wireless routers each on a different channel. So network only shows 1. Well there are 3 with better strength on different channels. How do i get the wireless system in the Mac to switch channels/

The Mac channel is selected when you pick the router. I would think the routers would appear in the Airport icon list separately due to the channel differences, but I have never been in such a situation. It seems bad practice to have all the routers with the same name. Are you in a business that has multiple routers around a building? Seems like they are not configured correctly. Can you get someone to change the router name of at least one?

Similar Messages

  • Planned order not selecting BOM and Routing.

    Dear All,
    I am runing LTP, but for all simulative Planned order system is not selecting Routing and BOM.When i change it manually its selecting the correct BOM and Routing.
    Please let me know what needed ....
    Regards
    Sathish

    Dear,
    First check the OPU5 setting for routing selection ID for your pant and order type?
    Check setting of OPJM fo the selection ID linked application?
    OS32 setting for alternative selection.
    BOM is selected by the system based on the setting in MRP plant parameters(OPPQ) and in material master MRP view BOM explosion type. I. e based on the validity date, lot size. so on
    Regards,
    R.Brahmankar
    Edited by: R Brahmankar on Apr 3, 2010 11:11 AM

  • How do I select, Copy and paste

    Hello,  I cant figure this out.  I want to remove the hand from the globe.  I have been trying to select the areas next to the hand so I can copy and paste but I can't select on Abobe.
    How do you select the area next to the hand so I can copy and paste to remove the hand?  Thanks in advance

    Surfer,
    I want to remove the hand from the globe.
    Will it not tumble down, then?
    And what about the other hand, on the other side?

  • I've created a movie but at the end there is an invisible audio clip that keeps playing. How can I select it and delete it?

    Hello everyone,
    This is Karie Garnier in British Columbia, Canada.
    I'm new to FCPX.
    I've created a 20 minute movie, but at the end of the movie, there is an invisible audio clip that keeps playing.
    How can a video clip be playing and making sounds, when it doesn't appear in the timeline? and ...
    How can I select this invisible audio clip and delete it?

    I think you could be right, that it's an old render file that's got stuck.
    By the time I finished this movie my 500 GB hard drive was 99.9% full and
    FCP started acting wierd, so I suspect you are right.
    I have since upgraded my hard drive to one 1000 GBs but when I play the movie the
    glitch remains.
    Can you please tell me:
       a) How can I fix the old render file so that it is no longer stuck?  ... and
       b) How do I take a screen shot of the timeline?

  • A-pack gone, Compressor2-How do I select channels?

    I used to be able to select the aiff file then select Right channel for what ever speaker.
    Now in import surround sound group i can only pick the file and not be able to change what channel from my camera I wish to use.
    I guess I have to save seperate files now for each channel?
    I use imovie and how do I do that now or how do I still change the channel in compressor2?

    You may have better luck posting on the Numbers ad-hoc forum.

  • Address Book: How do you select, copy and paste info to an email?

    I look up a contact in my Mac Address Book and want to cut and paste email/address and phone into an email I am writing in another application - in this case using AOL online.
    It seems that you cannot select and paste the information or selected parts of it from the Address Book to the email using the usual key commands to select/copy/paste text?
    It is as if you are trying to copy from a photo... am I the only one to find this a completely mindless limitation of the Address Book?
    Or is there something obvious I am missing?
    thanks in advance
    MS

    This is insane!  I switched to Mac a few years ago (still use XP/Win7/Linux at work) and generally like it. However, I keep running into these idiotic and arbitratry limitations!  I want to create a bunch of address cards for people I work with.  Everthing is the same except phone extension, name, and email.  There's no way to copy/duplicate contacts in Mac Address Book or on my iPhone.  And, like many similar issues, if I dare to ask about it at an "Expert Bar", I'll first get a look of confusion and when I finally get the person to understand, I'll just get the useless response of "that's how it works".   No ideas for work-arounds. No reporting to Apple development. Just the attitude of "why would anyone want to do anything it doesn't already do?"
    It's great having all the Apple stores around here and being able to ask (simple) questions, but they're really not able to deal with much more than older folks who just bought a Mac and don't know how to use a computer at all. If you've been using dozens of computers and operating systems for 20+ years, they don't want to talk to you.
    David

  • How to transfer selected apps and movies to new iPad?

    I just received my iPad 3, and I would like to transfer some, but not all, of my apps and videos from my iPad 1.
    I'm pretty confused as to the meaning of the Apps tab in iTunes. There is a list of apps to the left. Is this a list of all the apps that are "stored" in iTunes, whether or not they are on my iPad (or iPhone)? As far as I can tell, all those that are checked are also on my iPad. But there are some that are unchecked that are on my iPad.
    Then there are "screenshots" of the pages of an iPad to the right. Generally, the layout of the apps on these screens match those on my iPad, but there is one app on the screenshot that's not on my iPad.
    If I were to plug my new iPad in now and restore from this backup, what apps would move to the new iPad? How can I control those? Basically I would like to delete a lot of unsued apps from my iPad without losing them forever.
    Same kinds of questions with videos.

    The apps that have checkmarks next to the names are the apps that are selected to sync.
    Those screenshots that you see are all of the home screens on the iPad and why you see an app on the screenshot that is not on the iPad does not make sense. If you see it on one of those screenshots - it should be on the iPad.
    Anyway - simply select all of the items that you want to sync to the new iPad. Click on the boxes next to the names to select them. Deselect apps the same way - click on the boxes to remove the checkmarks.
    You can pick and choose all of the content in each tab in iTunes - apps, music, photos. books - whatever - you can control what it syncs by selecting and selecting. Videos included. All of these apps that have checkmarks next the boxes will sync to my iPad.
    This is how you select the movies that you want to sync.
    All of the content that is checked in iTunes is what would sync - but that is not what would be restored from the backup. The backup contains all of your app data and app settings, the device settings, safari history and bookmarks, contacts, calendar entries, camera roll - and so on. The backup does not contain your media - you still have to sync that from iTunes.

  • How to use select max and min query..

    hi gurus,
    we have got a custom report for develoment.
    the report has to fetch the max and min salarys department wise....
    how to pick up max & min sal ansal from table pa0008.

    Hi,
    Try the following
    select max(sal)
               min(sal)
               from <database table>
               into <internal table>
               group by department
               where <where condition>.
    Here we assume that sal is the field holding the salary and department is the name of the field in the database table. Where condition is optional.
    Hope this helps.
    Regards,
    Sachin

  • How to scan fm channels and save IN hp slate6 voice tab

    Hi,I wanted to scan and save the list of FM channels in hp slate6 voice tab.How do I do it?Regards,Umesh.N

    Hey  ,
    Welcome to the HP Forums! I understand you're looking for information on using the FM radio feature of your Slate 6 VoiceTab. Can you tell me which app you are using and I'll do my best to help.

  • How to list selected parent and child rows with values from ADF TreeTable

    I created one tree table having three levels using DepartmentsVO, EmployeesVO and
    JobHistoryVO where these tables contains parent and child relationship on database.
    Then i added one more column to the tree table which displays selectBooleanCheckBox. This
    check box is available for parent and child rows in that column.
    My first concern is i
    want to list out all the parentids and its child ids from three levels where the check
    box is selected.
    second concern is
    if i select the check box for a parent row, then the remaining check boxes for child rows also select automatically which are comes under the parent row.
    Thanks in advance.
    jk

    hi Frank,
    Thanks for the quick reply...
    As I mentioned before I am able to get the children using JUCtrlHierNodeBinding. but wanted to change the value of child row which have specific data.
    Is it possible through JUCtrlHierNodeBinding to update data of child and parent?? If so then can you please post the code snippet for the same???
    Viral

  • How do I select range and require end date in it crystal report

    I'm trying to select a range of dates in my records however it must include the end date from my parameters what is the syntax for that record selection and anything after the Start Date (open).  If the Date range doesn't end in the specified End Date then I don't want to see it.

    well I created two reports one with pulling all the end dates data then the other report with the stuff before that date and put the end date as a subreport in the other one so he can see what was done recently on the subreport and scroll through the other report while the subreport stays on the results bottom end - however he has to scroll through 100's of pages to find the data he wants so he doesn't like that. However it is a good mockup of the results he wants ...but he doesn't want to scroll through 100's of pages - my guess is he wants one report with end date only and any dates before hand.
    Original
    Part                         TransactionDate                         Qty                     Unit cost
    GA101                    10/11/2013                                  5                         1.23
    GA101                    5/25/2012                                   10                        2.23   
    GA101                    8/14/2011                                   15                        5.15
    HE8924                  8/22/2014                                   14                        4.25  
    HE8924                  6/13/2012                                   2                          3.25
    UY325                    8/22/2014                                   5                         6.32
    UY325                    7/10/2010                                   2                         3.25
    TE5689                  8/12/2014                                   1                          8.14
    TE5689                  5/16/2013                                   2                          9.12
    IO8978                    8/22/2014                                   6                         8.25
    IO8978                    5/20/2013                                   8                         7.25
    IO8978                    3/15/2012                                   4                         9.25
    IO8978                    1/20/2009                                   5                         10.25
    MY CODE RESULTS SHOULD SEE
    START DATE 01/01/2011  END DATE 08/22/2014
    Part                         TransactionDate                         Qty                     Unit cost
    HE8924                  8/22/2014                                   14                        4.25  
    HE8924                  6/13/2012                                   2                          3.25
    UY325               
      8/22/2014                              
        5                    
       6.32
    IO8978                    8/22/2014                                   6                         8.25
    IO8978                    5/20/2013                                   8                         7.25
    IO8978                    3/15/2012                                   4                         9.25

  • How to leapfrog selected record and going to the next one

    Hi ,
    My DB 11G , OS Linux Redhat ,
    i have a Linux script to read the name of the files listed on the Table , then open those files and save the content on another table , i need to speed up the process by running this script multiple time , so i need to
    read the first record (File name ) then running the script again to check if the record already selected then go to the second record and so on .
    is there any way to check the selected row then leapfrog this record  and going to the next record .
    Im already tried (for update skip locked ) but this will  return ( no row selected message when locked ) and  when running on the 2 Scripts  it will considering it as same session and always will be the same .
    my query is (
    select bi_file_name
    from dbm_cdr_head
    where bi_file_name like 'hd_auto%' and bi_auto_status=35;)
    thanks

    Really its about 1 million file per day ( Telecom CDRS Calls Details Records) updated every minutes , i think its very difficult to keep track by External Tables ,
    thank you for you advice about advanced queuing i will going to read about this new concept for me

  • Ipod Touch Mail:  How do you select all and delete?

    Hello,
    I recently decided to start using the mail app on my Ipod Touch. I found the "edit" button for deleting emails, but can't figure out how to select all.
    Can anyone tell me how to select all of the messages so i don't have to do it individually?
    Thanks

    Axel Foley wrote:
    at 539 I would recommend doing that on your PC when you can. I do understand that it is a hassle when one has a full inbox to move/delete. Now if all of those were in the Trash bin then it is a different story.
    Good Luck.
    Axel F.
    So you can do it from a mac? while synced or something?
    That was the 1st thing I tried, but I couldn't find the files to delete. I'll check it out again.
    Thanks for your help.

  • How can we write channels and endpoints configuration in actionscript?

    Hi All
                  how can we define channelset in actionscript in flex
                    just like at my client side application itself not in remote-config.xml
                       var cs:ChannelSet = new ChannelSet();
                     var amf:AMFChannel = new AMFChannel(.................................
                       i dont know how to proceed further        
                      could any one please help me

    Hi All
                  how can we define channelset in actionscript in flex
                    just like at my client side application itself not in remote-config.xml
                       var cs:ChannelSet = new ChannelSet();
                     var amf:AMFChannel = new AMFChannel(.................................
                       i dont know how to proceed further        
                      could any one please help me

  • "select count(*)" and "select single *" returns different result

    Good day!
    product version SAP ECC 6.0
    oracle10
    data transfers from external oracle db into customer tables using direct oracle db link
    sometimes I get case with different results from 2 statements
    *mytable has 10 rows
    *1st statement
    data: cnt type I value 0.
    select count( * ) into cnt from mytable WHERE myfield_0 = 123 and myfield_1 = '123'.
    *cnt returns 10 - correct
    *2nd statement
    select single * from  mytable WHERE myfield_0 = 123 and myfield_1 = '123'.
    *sy-dbcnt returns 0
    *sy-subrc returns 4 - incorrect, 10 rows are "invisible"
    but
    1. se16 shows correct row number
    2. I update just one row from "invisible" rows using se16 and 2nd statement returns correct result after that
    can not understand why
    thank you in advance.

    Thank you, Vishal
    but,
    general problem is that
    1. both statements have the same WHERE conditions
    2. 1st return resultset with data (sy-dbcnt=10), 2nd return empty dataset, but must return 1 in sy-dbcnt
    Yes, different meaning, you are right, but must 2nd must return 1, because of "select single *" construction, not 0.
    Dataset to process is the same, WHERE conditions are equal...
    I think the problem is that how ABAP interperets select count(*) and "select single *".
    Maybe "select count (*)" scans only PK from index page(s)? and "select single *" scans data pages? and something is wrong with that?
    I'm new in SAP and didn't find any SAP tool to trace dump of data and indexes pages with Native SQL.
    se16 shows all records.
    And why after simple manual update of just one record using se16 "select single *" returns 1?
    I've just marked one row to update, didn't change any data, then pressed "save".

Maybe you are looking for