How do I select in CS6 the way I do in CS3?

In CS3, I could duplicate a layer and do a ctrl-alt-shif-tilde to load a selection of highlights. How do I do this in CS6?
Thanks, Sharon

Thanks so much. That was it.
Sharon

Similar Messages

  • When printing a list in Address Book, how can I select more than the default Attributes and keep them selected when I print again? I want to print ALL information for contacts so I have email address, notes, phone, company, title, etc all on one page.

    When printing a list in Address Book, how can I select more than the default Attributes and keep them selected when I print again? I want to print ALL information for contacts so I have email address, notes, phone, company, title, etc all on one page. I don't want to have to check off an additional 5 or 6 attributes each time I print out contact information. Is there a way to change the default setting for printing lists, so it is not just "phone," "photo," and "job title?"

    I have a user who wants to do this same thing. I did not find any way either to default the attributes to anything other than what you see the first time. Seems like such a trivial thing, hard to believe they do not allow it. I did find a program for this called iDress but I can't seem to download it from any links on the Internet. Not sure if it is free or not, but it was recommended by a link on the Mac support site.

  • How can I select and delete the fill color (white background) of a live trace (B&W) with in an actio

    How can I select and delete the fill color (white background) of a live trace (B&W) with in an action set?
    Illustrator CS4 in windows XP.

    Maybe Li[ve trace] is not t]he way[ to go
    I have some suggestion one leave it as is and use a blending mode of multiply to give it a color background like this
    leave it as is make it a grayscale tiff import int Illustrator and color it it in Illustrator like this
    Or trace over it with the brush tool aand then give it a color ground.
    Or do the original over and do a cleaner job with no tone or a minimum of tone. Then Live trace.

  • Facebook is not loading properly and all my text and images are lined up along the right side of the page. How can this get fixed to the way it use to be?

    Facebook is not loading properly and all my text and images are lined up along the right side of the page. How can this get fixed to the way it use to look?
    Everyone who logs into Facebook on my Firefox has this problem however if we use Internet Explorer - facebook looks normal.

    If you have increased the minimum font size then try the default setting "none" as a high value can cause issues like you described.
    * Tools > Options > Content : Fonts & Colors > Advanced > Minimum Font Size (none)
    *Tools > Options > Content : Fonts & Colors > Advanced > [X] "Allow pages to choose their own fonts, instead of my selections above"

  • I have been using itunes all day and then it wanted me to install a newer version.  When I did it said I can't because it's missing mdsvr80 or something so i downloaded that now it has another error.  How do I get itunes back the way it was or to work?

    I have been using itunes all day and then it wanted me to install a newer version.  When I did it said I can't because it's missing mdsvr80 or something so i downloaded that now it has another error.  How do I get itunes back the way it was or to work?

    See this User Tip by turingtest2
    https://discussions.apple.com/docs/DOC-6562

  • How to do selective delete of the GL a/c, BA and Co Code from the BWrequest

    Hi,
    How to do selective delete of the GL a/c, BA and Co Code from the BW request ??
    Regards,
    Vivek

    Cube or DSO?
    Cube - manage - notedown the req number - selective deletion - enter req number at REQ ID and give the selection parameters as you need(GL a/c, BA and Co Code ) and execute.
    For DSo you can't do selective deletion on request id basis

  • How can I select and enlarge the entire doc,ge on a page, reducing the surrounding boarder.  I can move the difference text boxes about independently of each other but the outer most boarders of the main template block appear to be fixed.

    How can I select adn enlarge the entire document/image on a page, reducing the the surrounding boarder?  I can move the different text and image boxes around independently of each other but the outer most boarders of the main template block appear to be fixed.  I thought I would be able to enlarge or reduce my document from 'page layout' but this does not seem possible.

    Inspector > Document > Document Margins
    The word is border. Boarders are the Harry Potters of this world.
    Peter

  • In an effort to try to do a slide show through my apple TV and my computer I have lost all of my work in iPhono for the past 5 years. I upgraded and lost my albums and books. How do I get everything back the way it was?

    In an effort to try and show a slide show through my apple tv I upgraded my iPhoto app now I have lost all of my books albums and photo's over the last 5 years. How can I get it back the way it was 2 hours ago?

    to know your version of OS, click on the apple, then  " About This Mac".
    Same thing for your version of iPhoto: in iPhoto, click on "iPhoto" then "About iPhoto".

  • Opening CS4 fIles on a second monitor, the way it worked in CS3.

    This drove me nuts for well over a year. I guess this is a "tip" of sorts for dual monitor users who recently switched from CS3 to CS4 and expect files to open on the 2nd monitor.
    With the advent of CS4, the ability to automatically open a few dozen files across my 2nd monitor became impossible unless the Application Frame was set to cover the 2nd monitor with its opaque grey background. What I missed was the ability to have a totally unencumbered view of the 2nd monitor's desktop..the way it worked in CS3 and earlier….and most importantly: to have anything I opened, appear on the 2nd monitor.
    Without the Application Frame active and positioned to cover my 2nd monitor, loading files would always appear under the Palettes on my 1st (smaller) monitor. (It's the way I work. 30" 2nd monitor on my left and main 24" in front of the keyboard).
    A couple of days ago, I accidentally clicked the yellow "Hide" button in the corner of the Application Frame. As expected, it hid the Application Frame into the Dock and left the window free.
    Here's the unexpected thing: Loading a file (or multiple files) continue to tile diagonally down the 2nd monitor, the way they do when the Application Frame was visible.
    It's almost perfect…the tiling spacing is still larger than it was in CS3 and the tiling starts where the bottom of the Application Frame's menu bar was positioned before it was hidden. But it's as close to CS3 dual monitor behavior workaround as I've found.
    It'd sure be nice if Adobe implemented a "Hide Application Frame" View Menu item in CS5.

    The screen dimensions are "right," but I don't want it to use up any more space on-screen than is in the window.

  • How to write select statement before the loop and how to use read statemnt

    Hi,
    Recently our system has changed from 4.6 to ECC6.
    As its migrated its showing lots of errors like in between loop and endloop there should be no select statemnt........
    Can any one please tell how to write that coding in ECC6 , how can i change the code......
    In between loop and endloop i am having lots of select statemnts.....ple tell thye coding how can i select before the loop starts and
    how to read that internal table in loop.

    Hi Deepthi,
    You can do as per below:
    1) Select the required entries from the tables you need (VBAK, VBAP, KNA1, etc)
    SELECT VBELN ERDAT KUNNR
        into table it_vbak
        from VBAK
    where VBELN = S_VBELN. "Selection criteria
    If sy-subrc = 0.
    SELECT VBELN POSNR MATNR
        into table it_vbap
        from VBAP
    for all entries in it_vbak
    where VBELN = it_vbak-vbeln
    SELECT KUNNR NAME1
        into table it_vbak
        from VBAK
    where VBELN = it_vbak-vbeln.
    endif.
    2) Loop at the entries, and read internal table it-kna1 for customer info.
    Loop at it_vbak into wa_vbak.
    read table it_kna1 into wa_kna1 with key kunnr = wa_vbak-kunnr.
    if sy-subrc = 0.
    endif.
    loop at it_vbap into wa_vbap where vbeln = wa_vbak-vbeln.
    endloop.
    endloop.
    This is the basic idea and short example of how to extract entries and read internal table.
    Hope this helps.
    Regards,
    Patrick

  • How to random select 10% of the customer in the whole database in BIEE 11g

    Hi
    I would like to select 10% of the customer randomly from my database in BIEE, but I found that the function rand() is not for this purpose, how can I do that?
    Thanks for help!

    Read this thread,
    How can i get bind variable value in 9i or 8i?
    In 9i without the trace its not possible to capture the bind values.
    Aman....

  • GUI organization is messed up - how can I put it back the way it was

    SQL Developer 2.1.1.64
    was running fine, then somehow the GUI got messed up so now connections view takes up half the screen and I can't see the SQL windows and the tables windows. How can I put it back to the way it was? Any time I try to drag and move a window around, it gets worse. I would like to have the connections view only in the left quarter of the window as the default.

    If you simply want to reset everything to default you can backup/delete the settings directory usualli located in:
    Win 7
    C:\Users\%USERNAME%\AppData\Roaming\SQL Developer\systemXXXXXX
    Win XP
    documents and settings\%USERNAME%\Application Data\SQL Developer\systemXXXXXXMind you will lose all your other settings along with the layout, you may want to at least export your connections before trying.
    The layour file itself should be somthing called windowinglayout.xml located somewhere in the above config directory, but last time i checked deleting only this file had no effect.

  • How to read selected item of the dropdown listbox in dialog prgmming

    hello to all,
    i need one help.In dialog programming how to read the selected value of the dropdown listbox created in se51. the values are appering in listbox by using FM 'VRM_SET_VALUES' .and function code is also assigned to lisbox .but how to read that one particular value selected by user form the dropdown list.
    thanks.

    hello mate
    Try this following  logic and code  u will getting the answer
    Here this example  :  
                      Let Name of the LIST BOX BE  :  LT
    Code :
    Data Declaration :
      I_NATIO TYPE VRM_VALUES,
      W_NATIO LIKE LINE OF I_NATIO
    data: begin of itab occurs 0,
    LT(10)  type c,    
    end of itab.
    **This query to data retrival
    select  x1 x2 into table itab form tbl .
    loop at itab.
    w_natio-key = itab-LT.
    w_natio-text = itab-LT.
    append w_natio into i_natio.
    clear w_natio.
    endloop.
    **This code  for setting values in the list box
    CALL FUNCTION 'VRM_SET_VALUES'
        EXPORTING
          ID     = 'LT'
          VALUES = I_NATIO.
    **This code getting the valu form the list box
      CALL FUNCTION 'VRM_GET_VALUES'
        EXPORTING
          ID     = 'LT'
        IMPORTING
          VALUES = I_NATIO.
    **simply to print the values selected
    write : i_natio-lt.
    I hope this will help u out.
    Anand

  • How I input selection criteria to the FM F4IF_INT_TABLE_VALUE_REQUEST

    Hi,
    i implemented one FM 'F4IF_INT_TABLE_VALUE_REQUEST' in my program to show F4 help.
    in that i given  MULTIPLE_CHOICE        = 'X' for multiple line selection, i got the desired output there is no problem with that.
    but i want to show the F4 help screen with some of the record already selected.
    For example.
    we have NAME as search help(values HARI,MADHU,RANI,SINDHU) ,
    at first i selected HARI and MADHU, and then when i press F4 again i need HARI and MADHU as already selected.
    Reg,
    HARIHARAN

    Hi Hariharan,
    Please use the Mark_tab parameter of the FM F4IF_INT_TABLE_VALUE_REQUEST as below.
    data: MARK_TAB TYPE DDSHMARKS.
    data: mark like line of mark_tab.
    mark = '2'.
    append mark to MARK_TAB.
    *-- Call fucntion for search help
    CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
    EXPORTING
    retfield = l_retfld
    dynpprog = sy-repid
    dynpnr = sy-dynnr
    dynprofield = l_dynfld
    MULTIPLE_CHOICE = 'X'
    callback_program = sy-repid
    MARK_TAB = mark_tab
    TABLES
    value_tab = l_i_value
    field_tab = l_i_fields
    return_tab = l_i_return
    EXCEPTIONS
    parameter_error = 1
    no_values_found = 2
    OTHERS = 3.
    IF sy-subrc 0.
    MESSAGE i000
    WITH 'No search help found'(090) .
    ENDIF.
    Regards,
    Amit.

  • How can I select and remove the football net behind the goalkeeper with Photoshop CS5?

    Hello,
    Could you please help me with the following case. I have a photo of a football game and I would like to select and remove the football (soccer) net behind the goalkeeper. Do you know what is the procedure for selecting and removing of the net so as to "clear" the goal showing only the goalkeeper in the frame of the goal?
    Thank you in advance,
    Petar
    Product: Photoshop CS5

    Hi Petar,
    You're in luck. Photoshop CS5 was the first version to come with Content Aware Fill. You can use this to seamlessly erase objects, like your net. Try taking a look at this video, which should help you do just that:

Maybe you are looking for