How do I select just the pictures I want from my itouch to my MacBook Pro, I have already picture from my touch already in the iphoto, that don't need duplicated?
Wanting to transfer pictures from my itouch to MacBook Pro, when I connect itouch to Mac, it shows all the pictures on the itouch and some have already been put on, was wondering how you select just the one's I want to import, I've tryed control C, command C, and it doesn't do it. Would you be able to help me thanks.
maxfromwarsaw,
Why do you find it acceptable to yell at this forum, "HOW LONG TILL I GET A RESPONCE?"? We are not here to do your bidding. These forums are read and responded to by users same as yourself; users helping users. Be aware Apple tech support does not reside here.
Users respond to questions at their own convenience based on their knowledge of the question asked.
My suggestion is to go to the iPod Touch forum located at:
https://discussions.apple.com/community/ipod/ipod_touch
Cordially,
RicD
Similar Messages
-
i have just used air display with macbook pro. i have disconnected now from apple tv. but my laptop screen is still very small like its connected to the tv. this means all the tabs and writing is very small. like the display down the bottom where al the applications are, is n the middle of the page and not spread down the bottom. this is seriously annoying! all the writing is every small and the tabs are small and its hard to read. the air display link has disappeared from my computer. but the laptop screen is still very small. i want to know how do i get rid of this and return my macbook screen to its normal size. thank you
Hello chrispyw,
If your content is still being displayed incorrectly, I would check the resolution setting for the built in display with this article:
OS X Yosemite: Adjust your display’s resolution
If it keeps happening whenever you use AirPlay then I would use this section of the following article to reset the display system:
Apple computers: Troubleshooting issues with video on internal or external displays
Reset the system
You can reset the Mac's parameter RAM and SMC.Reset the resolution
Start by resetting the Mac's parameter RAM. If the display does not come up, was previously set to an unsupported resolution, and still results in no video:
Start up in Safe Mode.
From the Apple () menu, choose System Preferences.
Choose Displays from the View menu to open the preferences pane.
Select any resolution and refresh rate that your display supports.
Restart your computer.
Thank you for using Apple Support Communities.
Regards,
Sterling -
I am wanting in input audio to a MacBook Pro running 10.9.4. Since there is only the internal microphone as an input choice, how do I accomplish this?
Not something I've ever done, but I found a 9-year-old article from MacWorld -> http://www.macworld.com/article/1041790/tapetocd.html - that explains it a bit. Apparently the only software that you need is GarageBand and a hardware interface. Just Google "copy audio cassette to mac" and you'll get tons of hits.
Good luck,
Clinton
MacBook Pro (15-inch Late 2011), OS Mavericks 10.9.4, 16GB Crucial RAM, Crucial M500 960GB SSD, 27” Apple Thunderbolt Display -
I use my iCal as a daybook and every now and again need to reference events or occurences from several years ago. I tried to look something up from back in 2010 and the iCal on my MacBook Pro only has iCal data from Jan 1, 2011 onwards. Everything I've put in prior to that seems to have disappeared! I can't find anything under preferences that mentions archiving/storage. Can I change the setting so that this info is kept forever? And can I get my previous info back?
You can only sync with one computer. When you synced to the new computer it would have erased it and synced what was on the new computer.
You always need to have a backup, an iPhone is not a storage device.
When you get a new computer you need to transfer your library before syncing
If you don't have a backup you may be out of luck
The only thing would be if you're in the US and have access to the iCloud beta to reload purchases
http://support.apple.com/kb/ht2519 -
I want to copy a streaming video that my company has provided me with a link to a website that streams video presentation to my computer (provided I have an internet connection). However, for those occasions where I have no access to the internet, I would lioke to have the presentation on a disk. Is there a simple way to get the video downloaded and copied to a disk using the equipment I have?
One option is to create a new partition (~30- 50 GB), install the new OS, and ‘test drive’ it. If you like/don’t like it it, you can then remove the partition. Do a backup before you do anything. By doing this, if you don’t like it you won’t have to go though the revert process.
Check to make sure your applications are compatible.
Application Compatibility
Applications Compatibility (2) -
How to transfer my photos from my iPad3 to a MacBook Pro.
Hi all,
Can someone please explain how to transfer my photos from an iPad3 to my MacBook Pro. Both machines are fully updated.
After transferring the photos, is there a quick method of deleting the photos from the iPad?
Thanking you in anticipation.Importing photos and videos to computer
http://support.apple.com/kb/ht4083 -
How can I stop power point from opening each time my Macbook Pro starts?
How can I stop power point from opening each time my Macbook Pro starts?
Remove it from the list in Startup Items (System Preferences).
-
How should I copy my iTunes Music folder from my iMac to my Macbook Pro
I have copied the iTunes music folder from my iMac to my Macbook Pro using firewire and target disk mode. After all the files (for files read each individual song) have been copied I find that not all songs can be played. For those which will not play I get he error message "The song "bla bla" could not be used because the original file could not be found. Would you like to locate it?" When I answer "locate" on this popup I'm taken to a view of finder. If I double click on the song there, the song will play on iTunes. Seems to be something to do with the structure of the folders but in get info I cannot see a difference between songs encountering this problem and those which don't.
Instead of copying only the _iTunes music folder_, copy the entire *iTunes folder.*
That's all you need to do. -
How do I select just one audio channel in Final Cut Pro X?
I know this has been asked and answered somewehre... and I'm pretty sure the answer is simple. But I don't have hour's to search the net.
And the FCPX "Help" feature just ****** me off....
I recorded voice on channel 2 and shotgun nat.sound on channel 1.
I only want the voice track (channel 2) to playback in stereo.
I have already edited the video so I don't want to re-import the raw video to seperate out just the channel 2 voice track.
How do I select just one audio channel in the timeline, then pan it so it plays back in both the L and R channel?
Also, some of the audio was recorded with a air conditioner running in the background. Any suggestions on best audio filers to remove or lessen it?
Thanks, BarryI think you want to select the clip in the Timeline, choose the Inspector and then Audio, dual mono.
You can even do this by selecting multiple clips.
In the Event Browser as well. -
How do I remove pictures in the photo library on my iphone 5? I need the space to download iOS 7.0.2. I have a MacBook Air and have transferred pictures from my iphone to iphoto.
Photos in the ?Camera Roll can be deleted by tapping on Select, then selecting the photos to be deleted and finally tapping on Trash.
Photos in albums that were copied to the device by syncing with your computer running iTunes are deleted by syncing again. But before clicking on Apply or Sync deselect the no long wanted albums in iTunes. Finally click on Apply. -
I just bought a new Retina Display macbook pro, and I plugged in my iPod touch (4th gen) into the new computer, but it will not show up, even after I typed in the passcode. How do I get my iTouch to sync with my new computer without restoring my itouch?
iOS: Device not recognized in iTunes for Mac OS X
-
I currently have a 1Tb HDD installed in my macbook pro and have just recently acquired a 120GB SSD. I want to put the operating system on the SSD so it boots quickly but keep the files on the HDD. How do I do this?
i also contacted the company that sold me the battery and they offered me my money back or a new battery
Suggest that you take them up on their offer of a new battery. Make sure you got the right one for your model MBP.
2 separate MBP battery installation Articles:
1 -
MacBook Pro: How to remove or install the battery
2 -
MacBook Pro: How to remove or install memory
=================
Never post your email address in a public forum. Spam bots roam public forums looking for "spam victims".
If you insist on using your email address in a public forum & you want to "trick" the spam bots, then suggest that instead of using "@" in the email address, use instead the actual word AT.
Regarding responding to your emal addy, we ask that you post all questions to the appropriate discussion forum. This allows other users and other helpers to have a chance to view and respond to your post. That way, everyone benefits from the exchange.
Thank you
I have requested that a HOST remove your email addy. -
I just ordered a macbook air today and need to know if the 128gb SSD is enough space. I presently have a macbook pro and am using only 30gb hard drive space so, the apple rep said 128 is enough as I do not load much pictures or gaming etc. Also is i5 ok.
Id choose the I5 yes, depends on what your usage is going to be,
....your question about "128 gig being enough" begs the question for IDEALIZED USE of your macbook AIr
In the case of a Macbook Air with ‘limited’ storage on the SSD, this distinction becomes more important in that in an ever rapidly increasing file-size world, you keep vital large media files, pics, video, PDF collections, music off your SSD and archived on external storage, for sake of the necessary room for your system to have free space to operate, store future applications and general workspace. You should never be put in the position of considering “deleting things” on your macbook SSD in order to ‘make space’.
*Generally, unless you NEED the data at least once every few weeks or once a month,...it really does'nt NEED to be on the SSD of your Macbook Air.
Professionals who create and import very large amounts of data have almost no change in the available space on their computers internal HD because they are constantly archiving data to arrays of external or networked HD.
Or in the case of the consumer this means you keep folders for large imported or created data and you ritually offload and archive this data for safekeeping, not only to safeguard the data in case your macbook has a HD crash, or gets stolen, but importantly in keeping the ‘breathing room’ open for your computer to operate, expand, create files, add applications, for your APPS to create temp files, and for general operation.
Ive got more APPS than any human should have on my 128gig AIR,..(50 or so),....and 10gig of working data, important files etc etc.
Still have 82gig available....... the entire point is that someone shouldnt consider the Air a "storage device" for tons of pics, music, vids, etc.
*Never consider any computer a data storage device at any time under any circumstance, rather a data creation, sending, and manipulation device. Anyone who thinks data is safe on any computer, even copied upon multiple partitions is making a mistake that will, without fail, strike.
For needs of packing around a LOT of "big data" with your Air in its case..., get a nice 1TB HD for $70, or even a 2TB drive not much bigger.
Perfect 2TB HD, very slim, the "little giant" made by Toshiba (have several of these) $119
http://www.amazon.com/Toshiba-Canvio-Connect-Portable-HDTC720XK3C1/dp/B00CGUMS48 /ref=sr_1_4?s=electronics&ie=UTF8&qid=1379182740&sr=1-4&keywords=2tb+toshiba
*This one is the BEST external HD available that money can buy:
$75
HGST Touro Mobile 1TB USB 3.0 External Hard Drive
http://www.amazon.com/HGST-Touro-Mobile-External-HTOLMX3NA10001ABB/dp/B0062FZ2WS /ref=sr_1_1?s=electronics&ie=UTF8&qid=1379185002&sr=1-1&keywords=hitachi+extern a l+hard+drive -
I just bought macbook pro with 10.8.3 os. When i start the system, all applications automatically start up as well! How can I turn them off. I checked the user settings and no application is set tom open automatically!
You have 14 days to return the computer w/no questions asked. Plus you have 90 days of FREE phone tech support on top of your standard 1 year warranty unless you also purchased AppleCare which gives you an additional 2 years of coverage plus FREE phone support.
Strongly suggest that you take FULL advantage of the above before it runs out. Let Apple deal w/the problems. -
How can I print from my MacBook Pro to Canon MP560 using rear tray? I can't find that "option" in the print selection possibilities.
Sure can.
With a document open in Pages, select to print so that you can see the print dialog as shown below.
Note that to see this view, you may need to press the Show Details button in the bottom left corner. In the image above, since I have the expanded view displayed, this button changes to Hide Details
So with the view shown, first change the Presets menu to Default Settings. Then click the Layout drop menu and select Quality & Media. Make the changes you want and then click on the Presets menu and select Save Current Settings as Preset...
At the next window, give the Preset a name and select the Only this Printer radio button and then click OK to save it. That's it.
As for the Preset that you already have, if you no longer want this preset then you can delete it via the Show Presets menu pane that you've used already.
Maybe you are looking for
-
How to set selected field in one choice
Hi, I am using ADF 11.1.1.3 and dynamic tab shell. In my application i create a question based on different subjects. This subject is a drop down and the value of this drop down is coming from a VO.I dropped that VO as Select One Choice on my page fr
-
PDF to spool to run program in background
Hi Experts, i have created a custom program by copying FP_TEST_00 and gave nodialog mode for out parameters which will supress the prompt for printer and that i can run it in background. i just want the data to written to spool. call function 'FP_JOB
-
How to set Where cluase AND dynamically?
Hi all, I need some info on how we can assign the value to bind variable in AND of the where clause of View Object Query from the backing bean. As of now I am using the below lines of code for that. ViewObject vo = am.findViewObject("TestDynamicWhere
-
I am having difficulty in printing from my ipad to a Kodak Hero 9.1 WiFi printer. I am using Prin Pro Central as an App. The printer is not recognised on my Ipad. Any help or ideas would be appreciated.
-
No database table exists for table ZTAB1 after ORA-01438
Dear friends, We have a problem in our test system. One developer performed a transport which tried to change column from length 11 to 10 and after the transport, table is missing from database. We observed ABAP dumps DBIF_RSQL_SQL_ERROR with ORA-014