How do i select multiple steps and move them?

Hi everyone! I'm trying to select multiple steps and move them all into a branch of a condition outcome. Here's the thing, I have almost completed my workflow with several steps for dynamic approval, however, i need to put a condition at the very start of the workflow and it does not seem that there is an easy way to move all of the steps into one branch. I find the workflow explorer really clumsy in this respect. Is it easier to just drag one outcome of the condition, say to the very end of the workflow? It does not seem to work for me though...hmmm...
Thanks and generous points will be awarded!

Funtion Module 'SWD_GET_WORKFLOW_DEFINITION ' gives the structure of the Workflow definition. The informations are stored in following table.
1. SWDSTEXT -> Table which gives WF Steps and descriptions
2. SWDSBINDEF --> Binding information is stored in this table
3. SWDSMNODES -> All nodes information is stored in this table
4. SWDSMLINES -> Workflow lines are stored in this table.
<b>SWDSMLINES</b> and <b>SWDSMNODES</b> are important tables for current requirement. By changing <b>SWDSMLINES</b> the bulk copy and paste can be incorporated. But this is <b>very very risky</b>, better to have a backup of workflow definition before doiing anything.
Any enthuiasts to write code for a unitlity to move multiple steps ?

Similar Messages

  • How do I select multiple songs and uncheck them from compilations (itunes 10.5.2)

    So I found to my annoinance that itunes has recently moved much of my music to compilations that shouldn't be there. I tried searching online for how to turn compilations off or select multiple songs and uncheck them from compilations all at once and although I found both answers, they must have only worked for older versions of itunes. I no longer can find the option to turn off compilations under preferences and when I try to select multiple songs at a time then press "Get Info" the "part of a compilation" checkmark is not there. It is only there when one song is highlighted. This is very frustrated. In fact I would venture to say I've never been so angry with Apple. There are 609 songs "stuck" in my freaking compilations! I don't have time nor should I have to take the time to go through every single song right clicking it, pressing "Get info", unchecking "part of compilation" then clicking ok. WAY TOO MUCH TIME! If anyone has any good news on a faster way to do this I'd be VERY THANKFUL!

    This was a life saver! I even started to manually tick the box as well!

  • How do I select multiple pictures and compact them so there is no space between them?

    I know this should be easy, but I am spending a ton of time trying to move 45 pictures in my video closer together...one by one. Is there a way to grab, let's say 20 pictures, and combine or compact them together so there is no space between them? I'm tired of doing it one by one and trying to get it right. Thanks -

    Are these connected clips? Probably not at this stage.
    If they were connected, and you wanted to shorten each one, the way to do that is to make the connected clips a secondary storyline and then shorten them. The magnetic storyline will pull them up next to each other.

  • How do I process multiple files and turn them from raw to jpeg

    How do I process multiple files and turn them from raw to jpeg. Ive tried and it seems to go through the files but doesnt seem to process them or store them in the selected folder

    Yes that was the first thing I did. Then I used the process multiple files and selected a new folder to put them in and selected use open files and selected to turn them into jpeg. The images flash on the screen like they are being processed, but the folder never appears in library. Is it possible because there are a couple 16 bit files open that this corrupts the task. Do I need to create the folder first. Will elements not create the folder on its own.
    Thanks Vince

  • How do i drag multiple files and move to a folder

    I just purchased an IMAC and would like to transfer all of my photos from my old Dell laptop to my IMAC. I am using a USB Flash Drive and now I need to know how to drag multiple items and move the the pictures file? it will only let me move one at a time and this will take forever! I have the magic mouse. I have figured out how to choose/highlight multiple photos but i cannot figure out how to drag them over to the pictures file.

    If you're not used to spring-loaded folders, it may be helpful to open a second Finder window (⌘N) and navigate that to the target folder, so you can just drop them straight in.

  • How do I print multiple PDFs AND fit them to my paper size?

    Hi,
    I'm using a 24 inch wide plotter with roll paper. I want to be able to print multiple PDFs  AND fit them to a specified paper size. I can print one page and fit it to the paper, but I can't do it with multiple PDFs.
    For example, I have two PDFs that are only 8x8 inches. I want to print them side by side on a 24 inch x 12 inch page size and fit them to size and then FIT them to the page size so the end result will be 2 PDFs printing at 12 x 12 side by side.
    I can't seem to be able to do this. I'm sure I was able to do this using earlier versions. As it is, I have to print one at a time and waste half of my roll paper size.
    Any help?
    Adobe Acrobat Pro, Windows 7 Proffesional, HP Designjet 111 roll fed plotter.
    Thanks

    Note this illustration is Based on Mac version of HP Print Driver standard inkjet. However Control should be smilar Layouts and titles may be different:
    Adjust items shown according to pages desired

  • I need to be able to select multiple emails and foward them in one email

    I have to foward emails; however, only current way is one at a time.  I need to be able to select <n> emails, and then forward them to one or more people- but they want only one email with the other emails appearing in email as attached documents that they open by selecting one of the emails sent to them- need arisen as need to be reimbursed for business trip and they do not want multiple emails- only one email.  I only havevan iPad and could do this crummy Outlook but can figure out how to do on iPad...

    Well, just remember, this is only the second generation iPad and tablets are not really a true replacement for a fully functioning computer.  As they evolve over time, more and more functionality will be built in.........

  • In order to select multiple bookmarks and move then altogether into one folder in a single drag operations the use of the Library Folder was recommended. Where is the Library Folder?

    I don't see a folder with the title "Library Folder" Where does one find this in Firefox 4.01 for Macintosh? (OSX 10.6.7)
    thanks

    The names have changed. Try:
    Bookmarks > Show All Bookmarks
    Does that let you do what you want?

  • How do I select multiple photos from iPhoto and upload them to a Facebook album?

    I have transferred ALL my photos from my iPhone into my Mac. They are now in iPhoto. I recently created an album and I want to put the photos from iPhoto into it, but not all the photos. I have quite a lot of photos to put in, and I don't know how to select multiple photos and put them in the album. Help me please!

    Create  an album in the left hand pane of iPhoto and drag the 4 photos into it.  Open the albume and select all four photos and click on the Share button.  Next select Email and go from there.
    Happy Holidays

  • I'm having problems (1)selecting onscreen text, (2) having problems resizing menu boxes and selecting menues with the cursor. I'm not able to select menus and move them. I'm not sure how to correct this.

    I'm having problems (1) selecting onscreen text, (2) resizing menu boxes and selecting menues with the cursor. I'm not able to select menus and move them. I'm not sure how to correct this.

    1) This is because of software version 1.1. See this
    thread for some options as to how to go back to 1.0,
    which will correct the problem...
    http://discussions.apple.com/thread.jspa?threadID=3754
    59&tstart=0
    2) This tends to happen after videos. Give the iPod a
    minute or two to readjust. It should now be more
    accurate.
    3) This?
    iPod shows a folder icon with exclamation
    point
    4) Restore the iPod
    5) Try these...
    iPod Only Shows An Apple Logo and Will Not Start
    Up
    iPod Only Shows An Apple Logo
    I think 3,4, and 5 are related. Try the options I
    posted for each one.
    btabz
    I just noticed that one of the restore methods you posted was to put it into Disk Mode First rather than just use the resstore straight off, I Have tried that and seems to have solved the problem, If it has thank you. previously I have only tried just restoring it skipping this extra step. Hope my iPod stays healthy, if it doesnt its a warrenty job me thinks any way thanks again

  • How do I select multiple files under "Get File Info"and lock or unlock all?

    How do I select multiple files under "Get File Info"and lock or unlock them all? It seems to do it automatically when I have 10 or more selected. But how do I lock or unlock 5 or 6 files in one swoop? Thanks

    Select the desired files then press OPTION and select Show Inspector from the Finder's File menu.
    Why reward points?(Quoted from Discussions Terms of Use.)
    The reward system helps to increase community participation. When a community member gives you (or another member) a reward for providing helpful advice or a solution to their question, your accumulated points will increase your status level within the community.
    Members may reward you with 5 points if they deem that your reply is helpful and 10 points if you post a solution to their issue. Likewise, when you mark a reply as Helpful or Solved in your own created topic, you will be awarding the respondent with the same point values.

  • How do you  select multiple photos from photostream to move to a folder

    how do i select multiple photos from photostream to move to a folder in iphoto

    Hello Tiggertiffany,
    Thanks for using Apple Support Communities.
    If you need to select multiple items on iCloud.com then you can use the common procedure to select multiple items by either holding Command or Shift on your keyboard.
    To select multiple files or folders, hold down the Command (⌘) key, then click the items.
    To select multiple files or folders that are listed together, click the first item you want to select, hold down the Shift key, then click the last item.
    OS X Yosemite: select files or folders
    Have a great weekend,
    Alex H.

  • How to select multiple images and creat new versions???

    How do i select 800 images and make new versions of all of them at the same time? I have tried, but it only does the primary one selected and i don't have primary only selected.

    Option V works for me (duplicate version), as does option G (new version from master).

  • How do you select multiple messages/conversations on SMS/MMS to forward or save to memory card on Samsung Stratosphere?

    How do you select multiple messages/conversations on SMS/MMS to forward or save to memory card on Samsung Stratosphere? 
    My screen is cracked and I need to replace my phone and I don't see a way of selecting multiple messages or even conversations one at a time to forward them to email or to save them to a memory card.  I can delete thread but can't forward it or move it.  Is there a setting somewhere that will move the storage location for messages to the memory card instead of internal?
    If not, any suggestions on backup apps?  I have heard of Txtract to back up SMS and MMS messages, and Titanium Backup to back up everything (SMS, MMS, apps, app data...).  Anyone have any experience with those, or other suggestions?
    Thanks!
    Rich

    <Duplicate topic.  This thread will be locked.  Please see Help transferring data (SMS, MMS, Apps, App data) to new phone? for any replies.>

  • How to configure multiple buffers and execute them sequentially?

    I would like to build up a path follower using at least two buffers. I wish to write data into the buffers in advance and then execute them sequentially. How can I do?
    I have tried the case for using two buffers, and could only get the two buffers to work "sequentially",
    which means that I could first write data into buffer 1, then execute it, then write data to buffer 2,
    then execute it. Is there any way that I could use multiple buffers and exectue them as the sequence as
    I want?
    The following are the steps that I used for dual buffers:
    buffer 1:
    flex_set_op_mode
    flex_configure_buffer
    flex_write_buffer (check ready)
    flex_start (check complete)
    buffer 2:
    flex_set_op_m
    ode
    flex_configure_buffer
    flex_write_buffer (check ready)
    flex_start (check complete)
    I wish to achieve the following:
    flex_configure_buffer (buffer 1 & 2)
    flex_write_buffer (to buffer 1)
    flex_start (buffer 1)
    while waiting (flex_write_buffer (to buffer 2))
    flex_start (buffer 2)
    The purpose of my using two buffers is to try to prepare data for buffer 2 when we are waiting
    for the execution of buffer 1 and we could execute buffer 2 almost immediately when buffer 1 was
    done. Apparently, I have tried and with no luck to get it to work.

    You can always configure a buffer for indefinite continuous operation by setting the total points value in the configure buffer function to be the maximum value allowed. You can the use the check buffer function inside the while loop to monitor the backlog of your buffer in order for enough positions to be avaliable for the next set of points to be downloaded. As long as your sets of data are of a smaller size than the total buffer size this will have the effect you are desiring. You can always make your precalculations for the next set of points while the previous move is being executed, you just need to allow enough time between the beginning and the end of your first move for the next calculation to be done.

Maybe you are looking for