How do I select to simultaneously stream (airtune) and play on my computer?

Hi everyone. So I keep reading that as of last January '06 (6.0.2) iTunes will let you stream to remote speakers and play the same song simultaneously on the computer's speakers. How do I do this?!? I have searched everything and everywhere (these forums, macosxhints, the usenet forums) for over 30 mins now and no one mentions "how" to do it, just that it can be done. That is, once everything is setup, is there a mystery screen that says "click here for both at once"? Am I supposed to right click on anything in particular?
iTunes only lets me select one at a time - on the bottom right of itunes, I have the box that lets me choose my remote speakers ("livingroomstereo") or my computer speakers ("computer"). But again, it only lets me click on one, not both...
I have: iMac G4, iTunes 7.0.2. My airport express is at v6.2 firmware. I use a linksys wrt54g as my base, and the airport express works perfectly as a client.
What is the mystery! I feel that something is missing since no one describe how to select multiple ones at once so that it must be totally obvious. And that leads me to beleive that I am not "missing" it, it just isn't there....
Here is the useless Apple FAQ:
Can my AirTunes stream play through my computer's speakers at the same time?
Answer: Yes. With iTunes 6.0.2 or later, you can play through both the computer speakers and multiple remote AirPort Express units, provided that each AirPort Express has the latest AirPort firmware (available here). The maximum number of remote AirPort Express units is three to six in typical conditions. The number that works for you will depend on your environmental conditions (such as building composition and local radio interference), distance to the remote AirPort Express units, and available network capacity relative to your other usage.
I hate things that tell you that you can do a particular thing, but then dont tell you how to, or at least don't tell you how to find out how to do it...
Thanks!!!

Ah man. thank you.
I hope Apple fixes the indirect problem with their FAQ. On their faq (that I excerpted below) they provide a link to check and DL the newest software and firmware. I went through their "check" and gave me the thumbs up...
Thank you for pointing out the problem..
Can my AirTunes stream play through my computer's speakers at the same time?
Answer: Yes. With iTunes 6.0.2 or later, you can play through both the computer speakers and multiple remote AirPort Express units, provided that each AirPort Express has the latest AirPort firmware (available here). The maximum number of remote AirPort Express units is three to six in typical conditions. The number that works for you will depend on your environmental conditions (such as building composition and local radio interference), distance to the remote AirPort Express units, and available network capacity relative to your other usage.

Similar Messages

TS4436 How do I select more than one picture and send them all to Facebook on my iPhone 4s with iso7?

How do I select more than one picture and send them all to Facebook on my iPhone 4s with iso7?

Hi, I want to thank you for all your information regarding my questions about sending more than one photo to Facebook. I did have to stop in at Verizon (where I bought my iPhone) to find out why I did not have a choice to choose Facebook with the export icon. The tech had to go into my setting and enable Facebook to recognize my iPhone. When I upgraded to iso7 somehow it could not recognize Facebook. Once he did this for me I was able to follow your advice and your answer solved my question. Thank you

How to write select statement before the loop and how to use read statemnt

Hi,
Recently our system has changed from 4.6 to ECC6.
As its migrated its showing lots of errors like in between loop and endloop there should be no select statemnt........
Can any one please tell how to write that coding in ECC6 , how can i change the code......
In between loop and endloop i am having lots of select statemnts.....ple tell thye coding how can i select before the loop starts and
how to read that internal table in loop.

Hi Deepthi,
You can do as per below:
1) Select the required entries from the tables you need (VBAK, VBAP, KNA1, etc)
SELECT VBELN ERDAT KUNNR
    into table it_vbak
    from VBAK
where VBELN = S_VBELN. "Selection criteria
If sy-subrc = 0.
SELECT VBELN POSNR MATNR
    into table it_vbap
    from VBAP
for all entries in it_vbak
where VBELN = it_vbak-vbeln
SELECT KUNNR NAME1
    into table it_vbak
    from VBAK
where VBELN = it_vbak-vbeln.
endif.
2) Loop at the entries, and read internal table it-kna1 for customer info.
Loop at it_vbak into wa_vbak.
read table it_kna1 into wa_kna1 with key kunnr = wa_vbak-kunnr.
if sy-subrc = 0.
endif.
loop at it_vbap into wa_vbap where vbeln = wa_vbak-vbeln.
endloop.
endloop.
This is the basic idea and short example of how to extract entries and read internal table.
Hope this helps.
Regards,
Patrick

I have an 8500a how, once I select the apps I want and add to the printer. How do i get them to wor

I have an 8500a how, once I select the apps I want and add to the printer. How do i get them to work? And is it always this slow....

Hey jmknights!
While I can't speak to how quickly the apps will work, I may be able to help you with how they work. Once you have the apps added to the printer you would select the app you want to print from on the printer's front panel. Once inside the app, select what you want to print and if all goes as it should, the printer should begin printing the requested information within a few seconds.
Hope this helps!
If I have solved your issue, please feel free to provide kudos and make sure you mark this thread as solution provided!
Although I work for HP, my posts and replies are my own opinion and not those of HP.

How do I view a movie I rented and downloaded to my computer on my apple TV. The ATV is not seeing the rented movie in my shared itunes library? I can't seem to transfer the rental to the ATV from the computer!

How do I view a movie I rented and downloaded to my computer on my apple TV. The ATV is not seeing the rented movie in my shared itunes library? I can't seem to transfer the rental to the ATV from the computer!

Dear friends,
Thank you for responding to my problem so promptly. Frankly, I did not expect to hear from people so soon! The fact is that as soon as I posted the question, I was shown a number of similar queries and managed to find the answer. I have to say it's not intuitive! I have an apple TV original version. Apparently I had the ATV on streaming and not syncing. Streaming does not allow you to stream a rental from your computer whereas you can sync and transfer the rental from the computer!
Thanks again.
Colin

How do you make clips go in slowmotion and play reversed using imovie 08

how do you make clips go in slowmotion and play reversed using imovie 08

as owner of iM08, you're entitled for a free download here:
http://www.apple.com/support/downloads/imovieHD6.html
Plan B) using a designated 'slow mo' software, link, demo and how-to on my site:
http://karsten.schluter.googlepages.com/slowmowithim08

How can I select from drop-down list and jumping to selected subform?

I using LC Designer ES2 vers 9. Developing XDP. How can I Select from a drop-down list the appropriate selected subform (jumping to the selected subform on the page)?
drop-down list...A (jump to subform1)
                         B (jump to subform2)
                         C (jump to subform3)
subform1
subform2
subform3
....end of form

Hi,
you cannot set focus on a subform but on a field, as only interactive objects can be focussed.
From a dropdowns exit event the script will look this way:
switch (this.rawValue) {
          case "A" : xfa.host.setFocus("form1.page2.field1"); break;
          case "B" : xfa.host.setFocus("form1.page2.field1"); break;

How do I select a section of stills and NOT the transitions?

Okay - I'm switching from iMovie6 to 11 and I'm struggling doing the things that were 2nd nature to me! I'm trying to adjust the duration and when I select a section, I can't change it as it also include the transitions. Is there way to do select just the stills?
Thanks!

Haha, as an update, I found out that it does play from the beginning now, however it still doesn't seem to loop. When it reaches the end it loops back to the very start and plays from the beginning, ignoring the front of that section that comes up when I press the loop button. I'm wanting that one section to loop, not the whole thing. Anyway, I found some hlpful tutorials, but I am still seeking a bit of help with that loop button. How do I make multiples instances with it? That is, after I figure out how to make that section loop in the first place.

How to randomly select links in e-tester and how to get VU# in e-load

1. How to randomly select one from links in a webpage in e-tester?
For example: there is a root-page. On it, there are about 2000 links to its subpages. They all have the following pattern:
<pre>
multiline<TD width="50%"><NOBR>
<img src="/images/tfold.gif" border="0" alt="GXC_.+?" align="texttop">
{a href="(.+?)"}<font class="titleorimageid1siteid0">GXC_.+?</font>{a} </NOBR>
</TD>
</pre>
So how can randomly select one link and then navigate to it?
2.how to get VU# in e-load?
For example: we launch 4000 VU to load-stress our server. But we want to use different user names to login for different VU#. such as VU#1's username is ADF1, VU#2's username is ADF2, VU#100's username is ADF100 and so on. How can we implement the feature?
Thanks a lot.
Edited by: user783927 on Dec 1, 2008 5:57 AM
Edited by: user783927 on Dec 1, 2008 5:59 AM

Thanks a lot for VU#. Also i got an idea about how to randomly select a link:
Private Sub RSWVBAPage_afterPlay()
Dim objReg As New RegExp
Dim objMatchCol As MatchCollection
Dim objMatch As Match
Dim objSubMatch As SubMatches
Dim doc As String
Dim str As String
Dim rNumb As Integer
RSWApp.GetHtml doc
With objReg
.Global = True
.IgnoreCase = True
'the kind of urls have the following special pattern
.Pattern = "pageid=34,([\d]{5})"
End With
Set objMatchCol = objReg.execute(doc)
Randomize
rNumb = objMatchCol.Count * Rnd
If objMatchCol.Count >= 1 Then
If rNumb = objMatchCol.Count Then
rNumb = objMatchCol.Count - 1
End If
End If
Set objMatch = objMatchCol.Item(rNumb)
Set objSubMatch = objMatch.SubMatches
str = objSubMatch.Item(0)
Call RSWApp.setCustomVariable("var_url", str)
RSWApp.WriteToLog str
Set objMatchCol = Nothing
Set objMatch = Nothing
End Sub

How to programatically select a row in TableBean and update its column?

Hi,
Can anyone help me on How to programmatically select a row in a TableBean and update its column?
Thanks,
Jon

Hi,
My requirement is I need to update a column in a particular row of the table using fire action...
I have a datefield bean serve as birhdate and base on this I need to update the age column depending on the given dates..
Here's my code under the Process form request for your reference...
if (actionInMainPersonScreen.equals("changeDate"))
String checkId = pageContext.getParameter("paramDatePersonId");
OAFormValueBean depPerId = (OAFormValueBean)depTable.findIndexedChildRecursive("ChildPersonID");
OAMessageTextInputBean depFName = (OAMessageTextInputBean)depTable.findIndexedChildRecursive("FirstName");
OAMessageDateFieldBean dateBirth = (OAMessageDateFieldBean)depTable.findIndexedChildRecursive("BDay");
OAMessageStyledTextBean age = (OAMessageStyledTextBean)depTable.findIndexedChildRecursive("Age");
Date changeBDate = new java.util.Date();
Date dateToday = new java.util.Date();
SimpleDateFormat sdf = new SimpleDateFormat(DATE_FORMAT_NOW);
changeBDate = (Date)dateBirth.getValue(pageContext);
Calendar cal = Calendar.getInstance();
ResultSet empAge = null;
String newAge = null;
OADBTransaction trans = personam.getOADBTransaction();
System.out.println("BirthDate: " + changeBDate + " Date Today: " + sdf.format(dateToday));
String expQuery = "SELECT Trunc((sysdate - To_Date('" + pageContext.getParameter("paramDateBirth") + "'))/365) compAge, Sysdate from dual";
System.out.println("SQL: " + expQuery);
PreparedStatement expPreparedStatement = trans.createPreparedStatement(expQuery ,1);
try
empAge = expPreparedStatement.executeQuery();
} catch (SQLException e) {}
try
while (empAge.next())
newAge = empAge.getString("compAge");
age.setText(pageContext, newAge);
empAge.close();
} catch (SQLException e) {}
regards,
Jon

Streaming AirTune and Security

When I enabled Firewall, I can not stream from iTune to my stereo using an Airport Express. If I disabled Firewall, I can stream without problem. When I enable Firewall, I select "Allow only essential services" and include iTunes in the window. But I get an error message of "-3256" when I double click on a song in my iTune file.
Your help will be appreciated. Thanks in advance.
Tom

You need to go to http://expresslane.apple.com so they can reset your questions. choose itunes - itunes store - account management

How do I select a midi input device and record midi?

I have several midi input devices connected to my computer. I use them regularly with Digital Performer. I am trying to record a single midi track in Garage Band using an Oxygen 8 keyboard. In the preferences GB says that it sees 7 midi devices. How do I route midi with Garage Band and how do I tell Garage band which midi device to record from? When I create a midi track (well...I think that it is a midi track) and I try to record I do not see any midi notes being recorded.
Searching the help file for midi provided surprisingly little information. I am sure that this is simple stuff...perhaps so simple that I am missing something obvious.

Yes, if the controller sends the right MIDI messages
What do you mean by "the right midi messages"?
I have a virtual instrument (with for example) a delay effect knob. I would like to turn a knob on my midi controller and adjust the delay in the virtual instrument (as I can in just about any other sequencer). Can GarageBand do this, if so, how?

How to delete an email simultaneously from iPad and iMac?

How to delete an email simultaniously from iPad and iMac?

If you have iCloud activated on both that's what will happen.

How do you burn videos taken with myIphone and stored on my computer to a DVD disc. I purchased and tried using RealPlayer Plus 16 but got error message saying "unsopported media type"? I alos tried using Real Players file converter with no success!

How do you burn videos taken with my Iphone 4S and stored on my computer to a DVD disc. I purchased and tried using RealPlayer Plus 16 but got error message saying "unsopported media type"? I also tried using Real Players file converter with no success! Thanks in advance for any help you can give!

Probably the OP is no longer paying attention to this unless the OP is subscribed to this discussion. While not really an iPhone question I guess using an iPhone to produce the movie which then needs taking to the next step makes this as good a starting place as any unless you happen to know enough about what to do to determine in which forum to post. A suggestion in that direction would help.
Anyway, Apple is backing off from supporting optical media. It also depends upon what you mean by "DVD". A DVD is just an optical disc which can support different file formats, but many people think it means a movie disc you can put in your TV. Producing a movie disc requires special iDVD authoring software Apple used to sell but stopped several years ago. I don't know if the old versions work under newer systems. There's also the free Burn application which authors DVDs but takes a bit of learning and has nowhere near the features of iDVD.
If the OP means simply burning the transferred movie files to a DVD for archiving in computer format you don't need special software for that; its built into the operating system File > New Burn folder etc.

How to get selected/focused cell from table, and action on clicked

Hello Web Dynpro Community!
i have a view with a table, (id "Table_0");
table is 3x3 size, as celleditors i used inputfields; (standard binding to context with string atributes)
below table i have textarea.
when i select any cell in table i want to add that cell coords to textarea (col and row)
i know that i should use onLeadSelect action, but i dont know exacly how. or to be precise.. how to access to ID and row variables in that action.
the other problem is.. that onLeadSelect seems to work only when i change lead not the cell in same row.. so prabobly there is better way to do that..
any ideas?
Looking to hear from You.
EDIT:
Now i have following problem:
i have a table 3x3 with one column as dropdownbykey box and 2 as TableSingleMarkableCell (and inputFields As editors).
it works as i wanted:
so when i click on one of those input cells, insert vale AND click enter then the action onEnter( for inputfield) is fired... i can get the coords of that cell..
problem is.. that i want to get the coords before i click enter.. just when i click in cell.
i tried to use onAction event for column.. but it doesnt work for TableSingleMArkableCells (but it works for ddk column correctly).
so there is any way to do that?
ie:
below table i have inputfield (called value).
when i click on cell (and DO NOT press enter) i want to see the cell value in inputfield value.
future (and target need) is that i need to show some additional text for specific Cell. (i have an Object with 2 strings attributes, one i want to show in cell, and one in inputfield when cell is clicked).
M.
Edited by: Michal Rowinski on Jan 16, 2008 9:51 AM

You can use cell variant for your requirement . Go through the below link
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/c0310fd2-f40d-2a10-b288-bcbe0810a961
Regards,
Nethaji

How do I select to simultaneously stream (airtune) and play on my computer?

Similar Messages

Maybe you are looking for