How do I select which pictures will be shown on transition album 1 or album 2?

Working with IMovie using still shots not video. When I insert the transition of titled "album 1" or "album 2" ect.... I would like to select which pictures are shown in than transition. Is there a way to do that?

Select the transition and a bunch of markers will appear.
Grab the marker you want to move to whatever image you want. The Canvas will display the transition with the selected images. You have to select an image that's in the project.

Similar Messages

How can you select which pictures to upload from camera? plus facebook ?

Is there any way to select which pictures from your digital camera you would like to upload on to iphoto? Or is the only way to upload all of the pictures on your camera? I have 214 pictures on my camera and 210 of them are already in iphoto...i only want to upload the new 4!
Another question..
I am trying to upload my pictures on to Facebook, and they are significantly smaller than the pictures I uploaded via my PC. How can I get them to upload at normal size?
THANKS!

Re: the FaceBook problem
This sounds like you're uploading the Thumbnails that iPhoto uses to display the pics in the iPhoto Window not the pics themselves. Have you been uploading from the Data folder in the iPhoto Library Folder?
There are three ways (at least) to get files from the iPhoto Window.
1. Drag and Drop: Drag a photo from the iPhoto Window to the desktop, there iPhoto will make a full-sized copy of the pic.
2. File -> Export: Select the files in the iPhoto Window and go File -> Export. The dialogue will give you various options, including altering the format, naming the files and changing the size.
3. Show File: Right- (or Control-) Click on a pic and in the resulting dialogue choose 'Show File'. A Finder window will pop open with the file already selected.
Regards
TD

How do you select some pictures as opposed to an entire in Photo Album

I am Trying out Light room and so far notfinding it not very friendly. when I open a Folder of pictures. even though Ichoose certain one to create a Photo Album to put on a Website it wants to put everything in not just what I select.

You select an image by clicking on it - either in the Grid View or in the filmstrip at the bottom.
You can select more than one image by clicking on the first image and then Ctrl / Cmd + click on the additional images (i.e. hold down Ctrl / Cmd and click on the additional while Ctrl / Cmd is still pressed).
Alternatively you can click on the first image and then Shift + click on the last one to select the first, the last and everything in between.
If multiple images are selected, only one of them is active. It has a lighter shade of grey.
See the image in tyhis thread that explains it: http://forums.adobe.com/message/5180996#5180996

How do I select multiple pictures in a folder

How do I select multiple pictures in a folder? I have tried shift + click, command + click etc but cannot find a way of selecting a large group without selecting individually

Select the first image. Then Command-Click on each additional image you want to select as part of a group.
If you are using List mode, you can click on the first, then Shift-Click on the last, and all the files between the first and the last will also be selected.
Command-Click will still work to add additional non-sequential, or to remove items from the list already selected.

How can i know which index will be used when executing the query ?

1 ) I have query in which i have 3-4 tables but there multiple index on one column .
so how can i know which index will be used when executing the query ?
2) I have a query which ia taking too much time . how can i know which table is taking too much time ?
3) Please Provide me some document of EXplain plan ?

Hi Jimmy,
Consider the below example
/* Formatted on 2011/02/04 21:59 (Formatter Plus v4.8.8) */
CREATE TABLE FIRST AS
SELECT * FROM all_objects;
UPDATE FIRST
SET object_name = 'TEST'
WHERE owner != 'SCOTT';
CREATE INDEX idx_first ON FIRST(object_name);
SELECT *
FROM FIRST
WHERE object_name = 'TEST';
It has not used index
Execution Plan
Plan hash value: 2265626682
| Id | Operation | Name | Rows | Bytes | Cost (%CPU)| Time |
| 0 | SELECT STATEMENT | | 58678 | 7334K| 163 (4)| 00:00:02 |
|* 1 | TABLE ACCESS FULL| FIRST | 58678 | 7334K| 163 (4)| 00:00:02 |
/* Formatted on 2011/02/04 21:59 (Formatter Plus v4.8.8) */
SELECT *
FROM FIRST
WHERE object_name = 'emp';
This has used the index
Execution Plan
Plan hash value: 1184810458
| Id | Operation | Name | Rows | Bytes | Cost (%CPU)| Time |
| 0 | SELECT STATEMENT | | 1 | 128 | 1 (0)| 00:00:01 |
| 1 | TABLE ACCESS BY INDEX ROWID| FIRST | 1 | 128 | 1 (0)| 00:00:01 |
|* 2 | INDEX RANGE SCAN | IDX_FIRST | 1 | | 1 (0)| 00:00:01 |
From this we can come to the conclusion that, whether to use one index or not by oracle
would also depend on the data which is present in the table. This has to be this way as
we see in the bind peeking, if oracle sticks to only one plan, say only use the full table
scan, it would be a performance hit when it searches for the second query ie where object_name
='emp';
2.
If we have a query like below.
select * from emp
where upper(ename) = upper(:p_ename);
Evenif we have the index on ename column, oracle wouldn't be able to use the index, as there is a function in the predicate column. If you need oracle to use the index, we need to create a function based index as below.
Create index idx_ename on emp(upper(ename));
Regards,
Cool

How can I see which pictures have been backed up

How can I see which pictures have been backed up

All the pictures in your camera roll will be backed up in iTunes or iCloud (depending on whether you have iCloud backup enabled on your iPhone) every time a backup is performed. The other photos stored on your iPhone (i.e. the ones you didn't shoot using the iPhone itself) will NOT be backed up.
Nevertheless, it can't hurt to import them into iPhoto or Aperture (or whatever you're using) as roaminggnome suggested.

How do I Select which email account to view?

I have two email accounts set up on my iPad how do I select which to view? If I just touch the mail icon it goes straight to the exchange account each time and does not let me choose the other account that is set up

To view a different account in the Mail app tap the email account name at the top left of the Inbox, then tap Mailboxes at the top of the folder selection window, and you should then be able to select a different email account and navigate down into it's folders

Can I select which components will have auto binding turned on?

To be honest, the only reason I don't use JDeveloper full time is due to this reason only.
Can I select which components will have auto binding turned on?
I don't see the need or reason to bind every single component in the page to your backing bean.
This can clutter up your backing bean and all the searching for the bindings that I do care about is a real time waster.
I've looked at the preferences and settings without much luck, thus I'd appreciate any thoughts on this topic.
Thanks,
--Todd

To make sure I understand your response, your refering to Managed Beans as your Backing Beans - I thought the two were the same thing.
Moving on, that is a good idea and I'll try it right now in a test project.
Thanks,
--Todd

I have Boot Camp running on a separate HD (not a partition on my Mac drive). I would like to partition the PC HD to have a multi boot PC. What is the proper way to do this and how do I select which partition to start the PC?

I have Boot Camp running on a separate HD (not a partition on my Mac drive). I would like to partition the PC HD to have a multi boot PC. What is the proper way to do this? How do I select which partition to start the PC?

I have Boot Camp running on a separate HD (not a partition on my Mac drive). I would like to partition the PC HD to have a multi boot PC. What is the proper way to do this? How do I select which partition to start the PC?

Q10 - How di I select which email accounts are visible in the "Hub"

As I am slowly getting used to the new "features" of Q10 (I still think of most of them as bugs) and figuring out how to work around them, I am stuck on the Hub.
It seems to me that one good way to manage this constant issue of what is shown/saved/screened, etc would be to set up multiple email accounts (still dont understand why a mailing address dictates how the messages are handled, but that is another topic)
The problem i am faced with is that I cannot figure out how to change the settings of the hub to select which email addresses are shown in the hub, and which ones I need to go to separately (ir no be shown in the Hub)
Effectively, what i have done is set up many email address such as [email protected], [email protected], [email protected], etc and i only want to see abc1 and abc3 in the hub... you get the idea.
thank you for your help in advance.
Solved!
Go to Solution.

It is possible to define which accounts show up in the hub.
Go into the Hub and press on the 3 dots in the lower right corner. Then press Settings. Then choose Hub Management. Toggle the accounts you want to make visible/invisible.
Blackberry Engineering in Switzerland - Dexion Services AG

How do you determine the picture that is shown on iTunes for your podcast?

How do you determine the picture that is shown on iTunes for your podcast? Is that done in iWeb or Garagetunes?

That is a supported format,
Pull the battery while the device is ON, replace after a minute, Let the device reboot 1-3 min,
see if the problem is fixed,
If not we may have to reload the device OS to get back the missing option.
Thanks,
If you need more info please ask! If not please resolve the thread using the options by the Kudos’ star, Just place the check in the Post that answered your question, Thanks
Click Accept as Solution for posts that have solved your issue(s)!
Be sure to click Like! for those who have helped you.
Install BlackBerry Protect it's a free application designed to help find your lost BlackBerry smartphone, and keep the information on it secure.

How can I select which iPhone my mac will select to place cellular calls?

Hi,
I have two iPhones connected to my Apple ID with lines from two countries as I travel often. When I receive calls on any of those, I can pick up the call from my mac. But when I want to make a call from the address book on the mac for example, then the call goes through the line that was selected by FaceTime on my Mac. It does not seem to matter which phone is on, on, the other or both, or which physical iPhone I use: what seems to matter is the simcard, i.e. the calls always go through the same number. I would need to be able to select which line I use depending on where I am. I tried signing off FaceTime on both phones and mac to no avail. When I turn them back on, in whichever order, FaceTime always picks the same one (and shows this as the Caller ID that will be displayed in the Mac FaceTime preferences...
Ideally, I should be able to select the line in the same way I can select which caller ID I want to start conversations in FaceTime or iMessage but thus does not seem to be implemented. yet?
guardajoias

Have you tried changing the caller id on FaceTime on your Mac to see if it picks the other phone? Seems to me that what you'll have to do is change the caller id each time you want to make a call from each phone.

I have a lot of movies on my itunes library,when I sync my ipad2, how can I select which movies to load on the ipad?

How do I choose which movies to load into my ipad from my itunes library? Seems like everytime I sync, it loads up all the movies I have in my itunes library.

When connected to your computer's iTunes, select the iPad 'device' on the left-hand side of iTunes, and then on the right-hand side on its films/movies tab just select the films that you want to sync and then click the Sync button at the bottom.

How can I select which music gets synched to my iPOD. I am unable to select my device

I can't figure out how to select my device in order to select which music goes onto my iPod. There is too much music in Itunes for it all to fit.

In the new iTunes your iPod should be displayed in the top right corner by the iTunes Store. Click on it and select what music you want from the Music page and sync.
if you prefer the old look
Ctrl B to turn on the top menu
View > Show Sidebar
View Show Status Bar
Your iPod now appears in the left hand panel

Have many duplicates, how do I tell which one will become exclamation mark?

I have a bunch of doubles, but i dont know which ones will turn into the exclaimation mark and which ones are the good ones.
Is there an easier way to tell with out having to double click on every doubled up song?

You can collect all your dead tracks together in a playlist, where they can be deleted.
Using a playlist to collect dead tracks.
Create new regular playlist – Playlist1
Select whole library and drag to Playlist1
Create new Smart Playlist with the rule: Playlist is not Playlist1
Live updating checked – after you run it, uncheck live updating or you may not be able to delete tracks.
This playlist should contain all the dead tracks
http://discussions.apple.com/message.jspa?messageID=5696793#5696793
Or you can use a Robert Jacobson script - iTunesremovenotfound at:
http://mysite.verizon.net/teridon/itunesscripts/
This will delete dead tracks.

How do I select which pictures will be shown on transition album 1 or album 2?

Similar Messages

Maybe you are looking for