How do I selectively erase old data from old computers on my Time Capsule to make room for my new computer data?

My new computer did one complete backup on the Time Capsule now I get the message that there is insufficient room to complete further backups.
(128 GB available, my backup size is 170GB but the time capsule is 998GB)
I suspect that information from old computers is there. How do I selectively remove that information or do I have to erase the whole Time Capsule and start over with my new computer and backup again?

Check the info here.. but big warning .. it often fails.. if you want to keep your old backups archive them off the TC to USB drive.. then erase and start fresh clean backup.
http://pondini.org/TM/Time_Capsule.html

Similar Messages

  • Can I keep the data from multiple users on a Time Capsule separate?

    I have a Time Capsule which I use as a wireless router, etc. Everything is working fine. I have another user I'd like to allow to back up data to the same Time Capsule (using Time Machine as well). However, I'd like to keep the backed up data separate so if there was ever a need for a restore, our data wouldn't be jumbled together. It appears that there is no way to back up my data to one folder on the Time Capsule, and this person's to another...or am I naive, and the Time Capsule is doing this for us automatically?
    Regards.

    Yes, Time Machine backs-up your entire system, unless you specifically tell it not to. So that user's stuff is already being backed-up. See #26 in Time Machine - Frequently Asked Questions.
    The backups are in the same folder hierarchy, with the same permissions, as on your Mac; so each user is separate, and even an Admin user doesn't have access to a different user's files.
    When you do a full system restore from your backups, everything is copied back, just as it was.
    Via +Setup Assistant+ or +Migration Assistant,+ you can restore selected users and their data to a different Mac, either from your backups or directly from your Mac.

  • My iMac was stolen in a robbery - no files via iCloud (long story).  I have a new iMac which is set up and being used - how do I recover old iMac files from what looks like back-up files showing on my Time Capsule (also being used for this new iMac)?

    My iMac was stolen - but I think there's a backup on my Time Capsule (which wasn't stolen). I have a new iMac which I've been using normally; I didn't use the 'Restore from...' option at the start because I thought the Time Capsule had nothing on it.  So how do I now recover files from the Time Machine?  I can see various back-ups on the Time Capsule, from various machines - laptops, etc. - but it's not letting me open any of them to see what they contain. Does anyone know how I access this information?

    Use migration assistant.
    See http://pondini.org/OSX/MigrateLion.html
    Although this is only up to Mountain Lion it is still relevant to Mavericks.. only expect Mavericks to kick and buck a lot more.

  • HT1175 Can I transfer data from a PC to a time capsule?

    If I am using a Time Capsule with a new Mac Book Pro but I also own 2 other computers that I want to empty onto the time capsule to back up all of the files on those 2 older computers, can I do this?  If so, how?  Thanks!

    PC can access TC .. just load airport utilities on to the laptops.. that makes it easier to locate the TC.
    Set the disk sharing area, workgroup correctly.. usually WORKGROUP..
    Turn on the guest account.. read and write access also makes life easier.
    Also windows can have a hard time with typical TC name.. like fred's time capsule.. that is illegal name in SMB.. change to simple short name.. no spaces pure alphanumeric.. same with wireless names (SSID to normal humanity).
    Note the second question.. should you??
    Mixing data and TM backups is not wise in the long run.. TM will mess up if it cannot access the disk.
    Read Q3 here. http://pondini.org/TM/Time_Capsule.html
    Also go back to top menu and read the FAQ.. TM is much more complex than you think and TC is primarily a TM target .. anything else you do.. remember one day the TC will die. it has no way to back itself up. and all your files will go with it..
    I repair them and I am sitting here tonight with a dead 1TB .. had lots of data poor lady off loaded from her laptop.. and now it is all gone.

  • Move data from external hard drive to time capsule

    I want to move data from my external USB hard drive to time capsule.
    If I drag and drop, it seems go through my computer, and it's 500 gig of data, that impossible, is there a way to direct copy?
    Thanks in advance

    maxxxx wrote:
    If I drag and drop, it seems go through my computer
    Yup.
    is there a way to direct copy?
    Nope. 

  • I recently purchased a new macbook and am having trouble syncing my iPhone with the iTunes. It won't allow me to delete any of the music on my phone, so I am unable to make room for the new software upgrade. Does anyone know how to fix this?

    Does anyone know how to enable editing on a new computer? I only have an 8gb phone and over 4gbs of music, half of which I don't even listen to anymore. I really want it off my phone, but when I plugged it into my new macbook nothing would delete. My old computer barely turns on so I can't even plug it into the old one to delete anything. I hit the sync button on the new computer and that didn't help either. I'd really like to upgrade to the new software but don't have the room on my phone until this music/a few apps are deleted. Any help would be appreciated!!

    Here are two screen shots to show you what I am seeing.  The first screen shot shows it allowing me to select (highlighted in blue) my admin user (which is what I am locced in as).  The second screen shot shows it allowing me to select the "Guest" user (highlighted in blue).  However when I click on the user "Orion" nothing happens.  It will not change to highlight that user.

  • How to make room for other new threads?

    When I run my program for a relatively long period of time, a memory problem occurs!
    There are a number of threads in my program running simultaneously (for example 16) created from a single class, and in every one of them, there are two different threads, which are responsible for some different periodic jobs. So I sleep them for a random time periodically, and they do that job in a repeating manner. On the other hand, each one of theses main (16) threads, invoke some methods of the other ones, with a random delay. In order to implement this delayed invocations, without blocking the hole thread itself, I use a Timer and its method, schedule(object, delay). In another class which I pass an instant of it as the first argument of schedule(object, delay), I invoke the method of another main thread (one of those 16 threads).
    But the problem is after running my program for a while, this error shows up, and the program doesn't act normally after that:
    "Exception in thread "Timer-11324(or some other number like this)" java.lang.OutOfMemoryError: unable to create new native thread"
    What should I do? Does these Timers and their background threads dispose after their times passed? Or, should I dispose it manually? If it is so. how can I do that?
    Thanks

    There is a block of code like this in some methods of a class, which each of my 16 threads initiated from this class.
    class Messaging
         int Broadcast_Delay;
         public void Broadcast()
              Timer Broadcast_Delay_Timer = new Timer();
              for(int i=0 ; i < 16 ; i++)
                   //A random number between 0 and 100, generated by uniform distribution, as the timer delay
                   Broadcast_Delay = StdRandom.uniform(0, 100);
                   //Scheduling to run the run() method of an instance of class Broadcasting, with that random delay
                   Broadcast_Delay_Timer.schedule(new Broadcasting(i, trigger_pid, trigger_inum), Broadcast_Delay);
    class Broadcasting
         run()
    }So a block of code like this runs a lot in my program, infinitely.
    You are right, I put the declaration of these timers inside the methods in the main class, but they must be outside them!
    You all were right!!!
    But if I put the deceleration outside the methods, and directly in the main class, and if we invoke a method having this timer.schedule() continuously, is there a problem for last scheduled jobs?
    Thanks

  • How do I re-download a movie I purchased but had to remove temporarily to make space for other movies?

    Ok so I think I have most of the kinks worked out in how iOS 5 works for me. But I am having one problem. I have more movies than I can put on my iPad 2 (64gb) at once. So i deleted some movies from it in order to make room for some new purchases. However, now when I want to get them back on, I can't figure out how without, resyncing it with my computer. What if I only owned the iPad and didn't have the movies anywhere else?  I have figure out how to get music and tv shows I have previously purchased, but can't for the life of me figure out how to get back a movie I alredy purchased.
    Anyone have an anwer?

    Oh by the way. Goflex makes a wireless hard drive, the GoFlex Satalite, that you can use with your iPad. It's got 500 FB storage and can stream to 3 devices at once. Even android devices.

  • How to backup data from old droid to turbo?

    The turbo is not listed for new devices. How do you backup data from old droid to new turbo?

    To start your backup: Sign in to your Google Account from your old Droid phone and do the following:
    1. Go to Settings, Personal, Backup and reset, and.
    select both Backup my data and Automatic restore.
    2. Go to Settings, Personal, Accounts & Sync,
    and select your Google account.
    3. Select all of the option boxes listed, to ensure that
    all available data is synced. After backing up your information, you will be able to set-up and sign in to your regular Google account from your new Turbo and all of your information can be transferred to the Turbo.

  • How to transfer icloud data from old computer to new computer

    how to transfer icloud data from old computer to new computer

    The iCloud data will be on the new computer as soon as you download the iCloud control panel and sign into iCloud with your iCloud ID. What you see in iCloud is stored in iCloud, so it really doesn't matter what computer you are on. Once that computer is signed onto iCloud and the iCloud options are selected, you have full access to all of that information, and much of it is pushed back to your computer.
    If you are referring to the data in an iCloud backup created by an iOS device, then that is not something that would be on a computer at all.
    Does that answer your question? If not, post back with more info about what you are looking to find out.
    Cheers,
    GB

  • How do i transfer my data from old iphone to new iphone

    how do i transfer my data from old iphone to new iphone

    You need to sync the data from your old iPhone, to the computer via iTunes.  Once the data is on the computer, you then need to sync it to the new iPhone, also via iTunes.
    http://www.apple.com/itunes/how-to/#video-sync - this is a link with a short video that teaches you how to sync your iPod / iPhone using iTunes
    If you sycn with iCloud, you can also sync some of the data via iCloud.  This may not work for all you music, if it was not purchased via iTunes. 

  • How do you transfer data from old iPad to a new iPad?

    How do you transfer data from old iPad to a new iPad?

    iOS- Transferring information from your current iPhone, iPad, or iPod touch to a new device
    How to Transfer Everything from an Old iPad to New iPad
    iTunes Store- Transferring purchases from iOS device or iPod to a computer

  • I migrated all data from old PC to new and iTunes successfully transferred to new PC. When I click on a song it says it cannot locate the original. How does one map iTunes file to iMusic to enable play from original files ?

    Subject: Migration
    I migrated all data from old PC to new and iTunes successfully transferred to new PC. When I click on a song it says it cannot locate the original. How does one map iTunes file to iMusic to enable play from original files ?

    Subject: Migration
    I migrated all data from old PC to new and iTunes successfully transferred to new PC. When I click on a song it says it cannot locate the original. How does one map iTunes file to iMusic to enable play from original files ?

  • Recently had to purchase a replacement phone a friend of mine had backed up the data on the lost phone to his Mac laptop how do I get that backed up data from the lost iPhone that's on his Mac laptop to my new replacement phone? Please give step by step

    recently had to purchase a replacement phone a friend of mine had backed up the data on the lost phone to his Mac laptop how do I get that backed up data from the lost iPhone that's on his Mac laptop to my new replacement phone? Please give step by step instructions xoxoxo
    And my iTunes sign in is also screwed up... It is underneath my friends email (the one with my backed up data on his Mac laptop) HOW DO I CHANGE THIS SO THAT I CAN DOWNLOAD APP's again...

    I suspect unless he had some items in iCloud backup then they are gone.  Connecting an iPhone to a different library from that to which it was previously connected will result in the device asking if you want to erase it.

  • How do I transfer all my apts from old iphone to my new iphone?

    How do I transfer all my apps from old iphone to iphone 4?

    Connect the old iPhone to your computer, launch iTunes, select the iPhone under Devices on the left side of the iTunes window.
    Select Apps from the menu, select the Sync Apps box, then click Sync.
    Once you have synced your apps in iTunes connect the new iPhone then sync the apps.

Maybe you are looking for

  • Error while exporting using OMB+ in unix

    Hi we are trying to export the OWB project using OMB+ , i wrote a shell script which contains this /oradir/dkfndr/owb/owb/bin/unix/OMBPlus.sh /finapps/dkfndr/owb/owb_export.tcl the tcl script does the export stuff , we got the following error, srxgpo

  • Need help in use of XMLResolver resolveEntity method

    Hi, I have implemented the XMLResolver interface and set the resolver to XMLInputFactory.setXMLResolver method. But when i try to execute the below program it throws exception. Below is the code. Could anyone guide me how to proceed ... ---Main java

  • Add UDF linked to a UDT

    Hi all, I added a user-defined table (type 'no object') to be able to enter some master data with only a code and description. I want to link this table to a user-defined field. I tried to add an user-defined field linked to this table (just by follo

  • Page positioning incorrectly

    Can somebody please help. When I'm working on my web page in design view the page in correctly positioned in the center. Only when I preview the page in Firefox or Internet Explorer the page is positioned to the left.

  • Info abt developing iphone Apps

    helow am a software engg student i want to develop an iphone application as a project.... can ne1 plz guide me the procedure..... abt its sdk?? do i 've to get MAC for it..or can be done on windows..??? ??