How do i Send 8 and 16 bit unsign int througth the serial port

8 and 16 unsigned int througth the serial port

And How may pass 16 bit to my dac (datasheet attached) which desires serial data from 4 line (fig.8a pag.12) using parallel port (TTL compatible required)?
Any advice will be appreciated.
Paolo
Attachments:
dac714.pdf ‏132 KB

Similar Messages

  • How can I send audio from an application to the HDMI port on my Mac Mini while also sending the audio to another application?

    I am trying to use VLC (or any streaming audio player) and listen to a web radio station while at the same time using Audacity to monitor the CODEC's digital level.  I want to make a digital measurement of the level that the streaming radio station is using on the air.  I can calibrate the levels for maxbit by overdriving my web stations encoder and watching for clipping distortion on the decode on Audacity (waveform view).  I then calibrate the clipped value to the 0dB peak on Audacity's meters or waveform view.  I also am trying to calibrate and use the free Orban Loudness meter.  I require something like Soundflower (as others have indicated) but I find that sound flower is very unstable (or maybe mis-configured on my machine with Lion).   I think there is a clock drift issue since Soundflower works well for some number of minutes and then distortion appears in one of the outputs (either the HDMI or the feed to Audacity/Orban Loudness Meter).  I would have thought this was easy on a Mac, but as it turns out it is not.  Am I missing something here and there is a way to send audio from one application to my HDMI output and another application?

    Thanks Rudegar for the response. I was already afraid that Apple TV won't be of any help.
    Is there no solution for getting an audio-stream into the "airplay-system", e.g. by using another apple device?

  • I have my Dad's apple ID etc, but he has an iphone and i have an Ipod Touch then on IMessage i can read all the messages he recieves and sends and he can read all the messages i send and recieve how do i stop this?

    Hi
    I have my Dad's apple ID etc, but he has an iphone and i have an Ipod Touch then on IMessage i can read all the messages he recieves and sends and he can read all the messages i send and recieve how do i stop this? But i still want to send messages to him.
    Thank You

    . You do not need a seperate Apple ID. One one device you just need to go to Settings>Messages and add another/different Messaging email address and delete the common Apple ID address. Also see:
    MacMost Now 653: Setting Up Multiple iOS Devices For Messages and FaceTime

  • How do I send and receive email with my @me email account

    I want to drop yahoo as my email provider, so how do I send and receive email using my @me account.  Using yahoo, you go to yahoo, then mail and your good to go. I'm not a tech expert and fairly new to apple products and would like the improved security of an apple address.

    Hi stephraerae,
    Welcome to the Support Communities!
    The article below may be able to help you with this.
    Click on the link to see more details and screenshots. 
    iOS: Adding an email account
    http://support.apple.com/kb/ht4810
    iCloud is one of the options you can choose for your email provider.
    iCloud: Set up iCloud Mail on your devices
    http://support.apple.com/kb/PH2621
    This article includes the specific iCloud server settings:
    iCloud: Mail server information
    http://support.apple.com/kb/HT4864
    Hope that helps ...
    - Judy

  • HT3529 How do I send and receive emotion icons while texting?

    How do I send and receive emotion icons while texting?    

    You have to enable the Emoji keyboard on your device.
    The steps to do so are here:
    http://support.apple.com/kb/HT4976
    I note that these will show up when sent to other iOS users.  I'm not sure how they look on other devices like Androids or Blackberries.

  • On my iPad I can only send email and messages to apple products.how can I send and receive from other devices other than Apple?

    On my iPad I can only send email and messages to apple products.how can I send and receive from other devices other than Apple?

    Vallakat wrote:
    On my iPad I can only send email and messages to apple products.
    There is a huge difference between sending email and sending messages.
    Yes, I believe you when you say you can only send messages to other Apple products.  The iPad is not a telephone, and therefore, it cannot text message.  It can only iMessage, which means it can send and receive messages to/from other Apple products if they are on WiFi or an iMessage capable cellular network.
    Email, however, is a whole different category.  I don't really think you can only exchange email with other Apple products only.  Make sure you have correctly identified the symptoms.

  • My phone only let's me send iMessage from my email, how do I send and receive from my number?

    My phone only let's me send iMessage from my email, how do I send and receive from my number?

    Hi jwol21,
    If you are having issues sending iMessages from your phone number, you may want to double check that your phone number and your Apple ID have been linked and that your phone number is listed under Start New Conversations From. You may find the following article helpful:
    iOS and OS X: Link your phone number and Apple ID for use with FaceTime and iMessage
    http://support.apple.com/kb/ht5538
    Regards,
    - Brenden

  • How can i send and receive messages through CAN

    Hi,
    how can i send and receive messages using Vector CAN CARDXL

    As mentioned in this forum post, if you have a dll, this can easily be called from LabVIEW or CVI.
    I also went to the vector website and it does look like they have LabVIEW drivers available for download.
    Peter Flores
    Applications Engineer

  • How can i send and recieve mail through java

    HI All,
    plz let me know how can i send and receive mail through java.
    Regards:
    sachin kakkar
    http://www.datamansoftwares.com

    Using java mail API..
    try to search the forum for java mail... you find many question and answer.
    use the left search textfield

  • How can I use LabVIEW to send the equivalent of a CTRL D (in VT 100 format) out the serial port of my computer?

    I am trying to write a vi that interfaces with a piece of OEM equipment that is set up to talk with a VT 100 terminal. I can't seem to locate the ASCII equivalent string (if there is such a thing) of a CTRL D. Is there a vi that emulates VT 100 commands?

    If I recall, CTRL-D is EOF on most ASCII tables.
    You'd probably have to use an escape sequence
    or if you can use an unsigned 8-bit that might be
    easier.
    In article <[email protected]>, TLS
    wrote:
    > How can I use LabVIEW to send the equivalent of a CTRL D (in VT 100
    > format) out the serial port of my computer?
    >
    > I am trying to write a vi that interfaces with a piece of OEM
    > equipment that is set up to talk with a VT 100 terminal. I can't seem
    > to locate the ASCII equivalent string (if there is such a thing) of a
    > CTRL D. Is there a vi that emulates VT 100 commands?

  • How do I find and manage my iPad on the new iTunes?  It's not there.

    How do I find and manage my iPad on the new iTunes?  It's not there.

    You can have the 'classic' view by clicking on View - Show sidebar. In the new view, your iPad will have a link on the upper right.

  • How do I copy and paste an image form the internet to Keynote. I have done this successfully in the past by selecting copy and then paste by using the right click function and now am unable to do so. I am thinking it is an outdate OS problem...not sure.

    How do I copy and paste an image from the internet to Keynote. I have done so successfully in the paste by using the copy and paste right click functions but am unable to do so now. That was about a year ago that I attempted that I was able to do this. Thank you for your help.

    Some images are copy-protected.
    If all else fails, you can make a screen shot of the image: 
    With the image visible in your browser, press CMD-Shift-4 and your cursor will change to crosshairs.
    Position the cross hairs at one of the corners of what you want to copy and drag to the opposite corner, then release the mouse. An copy of the image will be saved to your desktop.
    You can now edit and use this image.
    Be sure to respect copyrights.
    Message was edited by: bwfromspring hill

  • How to fade in and fade out audio in the new version of Imovie?

    Please help me!
    how to fade in and fade out audio in the new version of Imovie?

    There is a tiny dot at the beginning and ending of an audio clip that can be moved to adjust fade in and fade out.

  • How could I play and transmit a stream from the same camera

    How could I play and transmit a stream from the same camera?

    Hi,
    As I said, you can use the method getVisualComponent() of the Processor to get a preview Window.
    You create a Processor, prepare it to generate an appropriate output DataSource for what you want to do (saving, TXing, etc).
    Then, for this Processor you extract an AWT Component where the stream will be previewed using the method getVisualComponent().
    Some of the player examples in the JMF guide use this technique. I'm still not write my own player. I'm using an adaptation of the RTPPlayer, but I'm planning to use the above technique to create a Player where I can apply some effects to the stream and then save it if the user wants to.
    If someone already did that, please, correct me if my procedure isn't right!
    By the way, thanks for your help! I was using the DataSource returned from Manager.createCloneableDataSource only to create the clones. I was feeding my main Processor with the original DataSource. That was the problem!
    RGB

  • How can I view and download iprocurement history for the past 1 year in Oracle?

    Hi,
    I'm presently using Oracle 12, how can i view and download iprocurement history for the past 1 year or longer in Oracle? The purpose is to view approval of claims etc..
    if not, where can i retrieve this information in oracle?
    Appreciate your urgent assistance.
    Best Regards, Michael

    Sign into your Account > Click on your account name > Click on Account > Purchase History
    iTunes Store & Mac App Store: Seeing your purchase history and order numbers - http://support.apple.com/kb/HT2727
    Direct link - https://phobos.apple.com/WebObjects/MZFinance.woa/wa/purchaseHistory

Maybe you are looking for