How do i send an html file exported from muse as email blast with images and live links?

My question it:
How do i send an html file exported from muse as email blast with images and live links?
I have designed a "website" in adobe muse and exported it as an html file. I am not sure how to send my .html file in an email!
Best,
Nicole

Unfortunately, the answer is, you don't. The requirements for HTML displayed in an e-mail reader are very different than those for HTML displayed in a browser. The output of Muse won't work as an HTML e-mail. You could upload the Muse site as a website and provide a link to it in an e-mail, but the HTML generated by Muse is not suitable for direct display by an e-mail program.

Similar Messages

How do I send an html file?

How would I send an html document so that it opens with all its graphics inside mail. I dont want to send it as an attachment just as a newsletter type of mailing. Any ideas??

I had the same problem. In Safari if you press apple & i it opens up a new mail message and puts the web page in it with all graphic and buttons working. So if you can host your newletter as a web page then press apple i you'll be able to send it as a html message.

Newbie question: How to share large QT movie files exported from FCP X?

Well, I've navigated through FCP X for the first time and I now have 16 QuickTime movie files I have exported from FCP X. Each file is a song from a live band performance. The files are:
- Apple ProRes 422
- 1920 x 1080
- 24-bit
- Frame rate 29.97 fps
Now I need to share these files with the band members. They will use them for two purposes:
- Watch, as feedback on their performance. In this case, I'd like to preserve the quality as much as possible
- Put some of the movies on YouTube, where quality will be lost, of course. They may post only short clips from the songs.
These 16 .mov files total 115GB. The smallest is 6.5GB, the largest is 13.9GB.
The quality of the movies is fantastic, both video and audio. I cringe to think about degrading the quality............but I have the practical problem of how to get the files to five different band members.
I normally distribute audio files I've mixed in Pro Tools via DVD-R discs, but the files are much smaller.
What are my options for sharing the files?
Do I need to use an application like Compressor to compress the files (ugh) to get them onto multiple DVD-R's?
I would assume this is a common problem that all FCP X users deal with.

I strongly recommend you to use Compressor. It is easy to use and there a lot of presets.

I burnt a dvd from a file I exported from quicktime using the share with apple and pc option. It was burnt directly from the finder. The dvd works perfectly on my mac, and also runs in my windows, but the sound in my windows pc is stammered.

This is file I created in SnapzPro (which was saved as a Quicktime mov - Animation) of a Powerpoint Presentation.

Jon, how do I re-compress the Snapz data for dvd playback?
That depends on your specific work flow strategy. I normally perform the processing in two stages if editing is involved or in a single stage if I don't plan to trim, title, add a narration track, add special effects, and/or add filters to the Snapz Pro X captured screen data.
In the two-stage process you export the captured data to an intermediate low-compression, high-quality fomat. (This can be the default settings for Snaps Pro X or a more modern editing specific format like ProRes 422/Linear PCM depending on the codec components for which your system is configured and your personal editing preferences.) The Snapz Pro X intermediate file is then edited in the application of your choice and the results are re-compressed to your final target compression format.
In any case, whether you are re-compressing the data using QT 7 Pro, iMovie, GarageBand, MPEG Streamclip, Snapz Pro X, or similar third-party app that accesses the built-in OS X QT routines, the export process is essentially the same. Whether you use a "Movie to MPEG-4" or "Movie to QT Movie" export, you must export to a data rate limited, multi-pass H.264/AAC compression combination to take advantage of the "Optimize of CD/DVD" option. Specific data rate limits depend on the playback dimensions of the file you are creating, the minimum level of quality you will accept, and the playback speed of the hardware to be used. (I normally target 4X-8X settings for SD content but if you know the recipient has a higher rated optical drive and your content is HD, then you can use higher encode settings for improved quality.)
I captured the slideshow again in Snapz, and saved it as H264/AAC. Is this good enough?
If you did not specifically use the "Optimize for..." feature, then the file is automatically targeted for "Computer" playback which assumes playback is from an hard drive which has greater bandwidth/faster throughput than an optical media player. If the target display dimensions are resonably small, the the contextual nature of the H.264 video encoder may or may not be within the playback limitations of an optical drive usually depending on the encode matrix dimensions, graphic complexity of the source data, overall brightness of the scenes, and limitations you may have place on the target file—i.e., the larger the encoding dimensions, the faster the data date and the less likely the file will be compatible with optical drive playback without having to constantly interrupt playback to cache/rebuffer additional data. However, you can always tell the recipient that if this happens, he or she should simply copy the movie file from the CD/DVD to their hard drive for playback.
What now? Do I open it in Quicktime and use the "share for mac and pc", then right-click on it in the finder and "burn to disc?"
What you do next depends on how you plan to burn the file. The steps explained above allows you to create a file that is compatible with playback from an optical drive in a QT Player app but is not authored for playback from a commercial DVD Player. Your next step is to burn that file to an optical disc that can be read by your recipient's computer. I my case, I normally burn the disc using a hybrid (HFS Plus/ISO 9660) format which supports HFS Plus, ISO-9660, Rock Ridge, and Joliet with Rock Ridge file systems. How you do this is up to you. You can, for instance, use a third-party app like Toast or Dragon Burn to create a data disc; create/burn an image file with your Disk Utility app (this is a good option if you plan to burn several discs now and/or in the future); create a named "Burn" folder, drop the file to it, and press the burn button; or simply insert a blank optical media disc into you optical drive, change the default disc name to whatever you want, drop your file to the blank media's Finder window, and press the "Burn" button. (NOTE: Burn options may differ depending on the software installed on your system and/or the version of OS X under which you may be operating.)
Dont see any specs re playback from an optical disc drive? The slideshow is only 3 min long, and I want to avoid turning it into a video DVD using iDVD, iMovie etc, as the quality of the pictures and type degrades badly. Thanks for the help. Been struggling with this for weeks.
As noted above, this is an encode setting that only becomes active when you are targeting your H.264/AAC encode for multi-pass/data rate limited compression. When active, the "Optimize for..." pop-up allows you to select "computer" (targets playback from a hard drive), "CD/DVD" (targets playback from optical media), or "Streaming" (targets playback from a realtime streaming server) options. This option prevents data rate excursions from exceeding limits normally associated with each of the named types of playback. This option has nothing to do with the file system used to burn the media disc which determines which platforms/OS can read the disc and the file it contains.

How do I send a .pdf file in the body of email, not as attachment?

Hello to all you MAC geniuses out there. I am using Pages to design flyers for my business. Then exporting them to a pdf file and trying to figure out how to send them in the BODY of an email and not an attachemnt that they have to open. Not really sure if this is a mail or pages question. It is probably a very simple step I am missing, but never the less can't seem to fiugre it out. Thanks in advance!
Genn

You must take into consideration that HTML & PDF are very different formats with conflicting purposes: HTML is by design intended for flexibility in appearance in such things as font & location of displayed elements, & has no fixed page size. PDF is intended to produce WYSIWYG documents, exactly the same regardless of platform, but requires either the Adobe Acrobat application or a PDF plug-in to do so.
Because of this, there is no way to convert a PDF document into HTML that will completely preserve the PDF's appearance. You can more or less force elements into the same relative position using tables & other HTML features, but pagination cannot be preserved, since no HTML formatted documents will have page breaks.
You also should consider that the appearance of an email message depends on the application used to view it. Most email, including what Mail generates, follows a standard known as MIME 1.0. MIME is designed to identify each element in the message such that different applications can process them according to their capabilities. Thus, since Mail knows how to display image files like gifs, tiffs, or jpegs, they will be displayed as if they were embedded in the text if the MIME tags indicate they should be. Anything Mail doesn't know how to process into displayable text or images, such as PDF's, will be displayed only as an attachment. The same will be true for other email reading applications.
IOW, email is not WYSIWYG. Some apps will show displayable items inline, some won't, even if the MIME type is displayable on your Mac in Mail.
There are several ways you can deal with this. You can try to convert the PDF into HTML, as suggested earlier. You will probably have to tweak the HTML so generated with an editor to get the best results, & deal with such things as pagination, image conversion or resizing, so-called web safe colors, etc. (PDF's are compressed & usually optimized for high resolution printing; to keep the message size down, you may want to convert images to lower resolution jpegs.)
Or, you can convert the entire flyer to a jpeg or png image, which insures WYSIWYG output, but may make text harder to read.
Alternately, you can compose a new message as plain text or as HTML that refers to the PDF's content & either includes it as an attachment or furnishes a link to a web page that contains it. This allows you to reach the widest audience, including those who do not have a PDF app or plug-in.
Whatever you elect to do, remember that what you send in the email is actually a combination of content & instructions about how to deal with it, & that not all recipients will see it the same way, no matter what you do.

How to take away the html file name from the view in address bar

Hi!
Wen I visit the pages of a site made with muse I see this in the browser address field
cinomiller.com/index.html
cinomiller.com/cv.html
cinomiller.com/contact.html
(and so forth)
I would rather just have
cinomiller.com
cinomiller.com/cv
cinomiller.com/contact
(and so on)
How is it done?
Thanks!

Hello Alejandro,
Unfortunately there is no option in Muse to remove the .html extension from the pages. However, if you site is hosted on Business Catalyst, you have the option to edit the URL of the page and remove the .html from it.
But, if your site is hosted somewhere other than Business Catalyst, you would need to contact your hosting provider to help you out to remove the extension from the URL of the pages.
Hope this information helps.
Regards,
Rajan

How to load a huge data file (export from mysql) to an oracle table?

I have a data file which contains 1.3G bytes table data from mysql. It's format is csv.
How can i load these data to an oracle table in java way?
I thought about using sqlldr. But it requires a oracle client which may not be permitted in my environment.
If i generate "insert " statement and use batch update the batch update will stop if it comes across an exception when executing the insert one by one. I find no "insert ingore" statement in oracle like mysql.
Is there anyone can give me a solution with high performance? It's urgent and Thanks!

hsy541 wrote:
I have a data file which contains 1.3G bytes table data from mysql. It's format is csv.
How can i load these data to an oracle table in java way?
Why must it be a Java way? The point is just to move the data.
I thought about using sqlldr. But it requires a oracle client which may not be permitted in my environment.
Why not just import the .csv file into Oracle? I'm sure there's a script or utility that will do it.
If i generate "insert " statement and use batch update the batch update will stop if it comes across an exception when executing the insert one by one. I find no "insert ingore" statement in oracle like mysql.
You want to turn off transactions? I'm not an Oracle expert, but I'd be shocked if there was something you could do in MySQL that didn't have an analog in Oracle. Find a better resource, like somebody that actually knows Oracle. Who set up that database for you? Consult with them.
Is there anyone can give me a solution with high performance? It's urgent and Thanks!Urgent to you....
%

How do we load a html file from a folder on a sdcard into a webview panel c# windows phone 8.1

Every time a character is made in my app it is saved to an html file named after it in a folder called RpgApp on the sdcard
so if the characters name is john smith then there will be a john-smith.htm located in RpgApp folder on the sdcard
now that bit works great
the app also makes a list of buttons each one named after a file inside the RpgApp folder (so in this case there would be a button named john-smith.html ) and the content is the same as the name so it displays as john-smith.html
each button has the following method on click
private void htmlButtonClick(object sender, RoutedEventArgs e)
StorageFolder externalDevices = Windows.Storage.KnownFolders.RemovableDevices;
string curDir = externalDevices.ToString();
Button button = sender as Button;
Uri result = new Uri(String.Format("file:///{0}/RpgApp/"+button.Name,curDir));
web.Navigate(result);
now the idea is that when you click the button the webview control (aptly named "web") loads up the content of the file (you notice button.name as part of the url? well thats because the buttons name is the file name :)
but instead the browser remains unmoved, just sits thier blank
to test i changed web.Navigate(result); to web.NavigateToString(button.Name);
and sure enough when ever i clicked a button the webview displayed the name of the button i clicked
any ideas?

Hi D.Eastwick,
I will recommand you read the html file content from the folder in the sd card and convert it to a string, after that we can use the
NavigateToString method to load the html content in the WebView.
Besides, please try to do a test by puting the html file in a
LocalFolder and use the URL like this: "ms-appdata:///...." to see if it works.
Best Regards,
Amy Peng
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

HOW-TO Distinguish between file exported from Datapump and normal export

How to distinguish between the dmp file export from the data pump utility and the export utility in Oracle 10g and 11g .
Thanks,
SS

Like Werner suggested, it's never hurt to try anyway.
use imp with SHOW=Y, if it works then Original otherwise Data pump.
Once you determined one file, there's good chance that the rest are same. I don't think previous DBA will go through the trouble by mixing data pump and traditional exp/imp.

How do you send a imessage to ipad from iphone

How do you send a imessage to ipad from iphone

The iPad must have iMessage registered and enabled, and you need to address the iMessage to an email address that is set up and selected to be used with iMessage on the iPad. If the iPad owner also has an iPhone, an iMessage can be addressed to the iPhone's cell phone number if the iPad owner has their iPhone number selected to be reached at with iMessage on the iPad.

How do i find a .mp4 file downloaded from email to my iphone

How do i find a .mp4 file downloaded from my gmail email to my iphone. Unable to locate the file or maybe not sure how to go about it?

You don't, as ringtones are a one time purchase and as such can't be redownloaded.
If you still have them on your iTunes library, you may sinc them from there.
If you have a backup that contains them, you may restore your phone from that backup.
Or you can go to expresslane.apple.com and try for a re-issue. Which they do only occasionally and depending on the circumstances.

Workflow- sending a html file in a mail(outlook)

Hi Guys,
i want to send a html file in a mail(outlook) in workflow. whenever enduser click that file its open automatically sap inbox.
html file belongs to a logo, if we click on that file it will automatically opens the SAP INBOX.
this is the my requirement.
give me suggestion for this requirement or any other solution.
we appriciate your reply.
Thanks
Sankar.
Message was edited by: sankar surya

Unless you are prepared to zip and email every folder and
file related to
the page,
exactly as it is on your computer, it would be wiser to
upload it all to
your hosting
server, and send a link to the recipient.
"2start" <[email protected]> wrote in
message
news:erat61$h8m$[email protected]..
>I need to email a frame page I have created in
DreamWeaver.. How can I do
>that?

Send local html files to Browser

I have a Servlet program which can send any HTML files located on the computer which Tomcat is running to client browser. The HTML files are not necessarily in Tomcat's "webapps" folder. My method is quite simple. Read the content of the local HTML file and write it out through HttpServletResponse object. But there is problem that if the HTML file includes images, the images don't appear in client browser. Is there a way to send those images to client browse as well? Thanks in advance.

Well, this is just an idea, but:
You would probably have to create a new Servlet, that will identify the image type, set the correct content type (response.setContentType("image/gif") for example). It would have to get a binary InputStream to the image and copy the input to the output stream in the response(use the getOutputStream and not getWriter...)
In your HTML writing servlet you would have to scan each line for an <img ... > tag parse out the source and replace it with the image servlet.
Locating the image may be problematic if it is not given in absolute "file://" url. You may need to scan for a <base> tag in the HTML as well, or use the HTML page's directory for the path in which to find the image... but it could come in more complicated then that depending on how complicated the HTML was written (ie, for a server with multiple hosts, or with aliased paths...)
Or, you might be able to write a filter that looks for images(*.gif *.jpg) and sends the request to your image servlet....

How can i send the html animation by email for my freind(yandex,email)?

how can i send the html animation by email for my freind(yandex,email)?

Hello! Happy New Year to you too.
I am not sure I understand your question properly.
If you are making this animation for a wesite, you can include your files into an iFrame and upload all your files to your website server.
For example add this to your html page:
<iframe src="http://www.yourSiteName.com/folderName/index.html" style="width: 100%; height: 400px; margin-top: 10px; margin-bottom: 30px;"></iframe>
Note: change the sizes, change your site name, folder name and html edge file name.
If you want to just have your composition on one page by itself, then just add the folder to the root area of your server and then you can send the link by email for people to see it directly on the web. You do not need to put it in an iFrame for this. Just email the web address - so for example:
http://www.yourSiteName.com/folderName/index.html
Let me know if I understood properly and if not please give us a clear description of what you want to do.

How can I send the html animation on the post(mail,google,yandex)?

how can I send the html animation on the post(mail,google,yandex)?

What do you mean? F you want to post your files here, put a zipped file on the cloud somewhere like dropbox, and post the link.

How do i send an html file exported from muse as email blast with images and live links?

Similar Messages

Maybe you are looking for