How do i separate emails from the same person

I do not want emails back and to the same person archived into one. Is there a way to separate them?

i have no idea what you are asking... could you please clarify?

Similar Messages

My emails from the same person are grouped together, how do I undo this so that each email stands on it's own?

1.My emails from the same person are grouped together, how do I undo this so that each email stands on it's own?
2.Currently my emails are grouped together if the subject is the same, how do I undo this?
3.My emails are "folded up", with tabs like "See more" - how do I undo this? - I want to see the full email at once without having to click multiple times in the email on "show more" etc.
4.When I send an email to some one, a copy of that email is sometimes sent to me?? - this confuses my and make me think I by accident sent it to myself, but when I check it in the SENT box, it the correct recipient's name was used. How to fix this mystery?
Please help, I am not good with computers so you will have to keep your answer simplictic or in steps.
Thanks!

Click the View menu in the Mail menu bar and uncheck Organize by Conversation.

*** Receiving multiple emails from the same person

This is a new issue that started happening today and I'm wondering if someone can help.
When receiving emails today, they are duplicating as they are coming into my inbox. The wierd thing is, the amount of duplicate emails is inconsistent. All emails are coming in as duplicates, but some messages duplicate up to 7 times for each sender. Other times, the message is in my inbox 4 times. Same message from the same sender.
Is there a way I can tell my MacMail to stop this from happening???
Thanks in advance.

People keep reporting this problem from time to time, and almost always it is some sort of Yahoo account and there is nothing the user can do to fix it. The problem usually fixes itself after some time for no apparent reason, just as it started.
Try using a different mail client, such as Thunderbird, and see whether the problem happens there as well. If so, then you know Mail has no bearing on it and there is nothing you can do other than complaining to your ISP or whoever is responsible for that account.

How to select all emails from the same sender

Hi
I have been pulling my hair out with this one, what i want to do is select all emails from 1 specific sender and delete them, because my inbox is completely chocka, is this possible in mail.
Cheers
Karl

There are multiple ways to achieve this. First, you could click the From header in the mailbox in question to sort by sender, then just click the first message from the desired sender and shift-click the last message. Second, you could do a search using the search bar, limiting it to the mailbox in question and searching only the From field using the buttons that appear when you start typing a query.

From one of my yahoo groups all the messages come thru appearing from the same person. Why is this?

I belong to several yahoo groups and use the filters to send them to their respective folders. Lately with one group, all the messages appear to be from the same person, which I know is not true from looking internally. I've looked on my providers site at my email, at at the groups site, they are that way so it's happening when it comes into Thunderbird. Running version 24.6.0.
Thanks Dwight from WI

They aren't in the address book. Anyway I went into the config editor and set something to false and it took care of the problem. Don't remember what it was. Something with "Show" in it.
Thanks for your time!

I have an iphone 3gs, and i keep getting blocked number calling me (prank calls) im getting really fed up with it all now i have had 12 calls from the same person! i was just wondering if there is any way i could block this caller from calling me?

i have an iphone 3gs, and i keep getting blocked number calling me (prank calls) im getting really fed up with it all now i have had 12 calls from the same person! i was just wondering if there is any way i could block this caller from calling me?

Contact your carrier and ask them.

When I copied my cd collection to my iTunes account, I use the view by CD option in the viewer. How can I get songs from the same album to show nder the same view, instead of making it a separate thing?

How can i fix this problem with songs from the same album, not being organized under the same when they are from the same CD?

Thank you... just read up on iTunes Match. That stinks, paying a yearly thing... but I understand everyone has to make a dollar. I think I'm better off just picking the best songs out of my collection storing them on my computer or iPhone then selling my CD's to some used CD place. If I ever really want to hear a song there are multiple options and if I want it... the .99 to 1.29 option is always there.
Thank you for the information

(LR5) Is there a way to keep the history of separate developments from the same RAW file?

For example, I want to create both a color and a B/W version from the same original. Let's say that in the color version I want to use one value for contrast, while in the B/W version I want a higher contrast. I want to keep track of both sets of changes.
Right now, after I finish developing the color version and export to a final file, I reset to the original and start developing the B/W version up to its export phase. But then, if I realize that I want to do some adjustment to the color version, if I go back in history to the final change for the color version and do the adjustment on it, the history of changes for B/W gets overwritten.
What I want is to keep track of the changes of each version as some sort of separate history branches...
(I'm using Lightroom 5)

Yes you can create a virtual copy. Select your image and from the top toolbar click:
Photo >> Create Virtual Copy
Then change to B&W and use you different settings.
Good news - this does not duplicate your image on disk; it’s stored as metadata in the catalog.

How to compare two fields from the same table in the select statement

Hi, friends
I try to compare tow fields from the same table, but no result,
For example, this
data: cptotchek tyep i.
select count(*) into cptotchek
from aufk where erdat = aufk-idat2 .
The result is cptotchek = 0, but there are the records in aufk , where, aufk-erdat = aufk-idat2.
Please, help me, i don't use the loop statement for optimize my program.
Regards

Hi ,
       it will not return any value   when you are using   column of same table
       such as Date Field   , Because while Using Aggregate Function it will not check with self column
.      For that you have to take data in one internal table and then you can work on it .
     And if you are worried about Performance it will not affect , untill you are selecting only required data .
you can try this way .
data: cptotchek type i.
types : begin of w_aufk.
        include structure aufk .
      types : end of w_aufk .
data : it_aufk type standard table of w_aufk with header line .
select * into corresponding fields of table it_aufk
from aufk .
loop at it_aufk .
if it_aufk-erdat = it_aufk-idat2 .
write : / it_aufk-erdat , it_aufk-idat2 .
else .
delete it_aufk .
endif .
endloop.
Regards
Deepak.

How can I view the same emails from the same account on two different computers.

I use 2 office computers and want to see all my Thunderbird emails. I dont need to use them at the same time, but want to be able to see the emails and responses from either computer? How can I direct the path do do this? Thanks for your help? Janet

You'd need to set-up your account as IMAP on both computers.
https://support.mozilla.org/en-US/kb/imap-synchronization#w_about-imap

Does anyone know how to print an email from the new iPad before you send it?

I cannot print emails before sending them. The little print icon to print is not there. I even saved an email as a draft, and that did not work either. Is it even possible to print an email before you send it, or do you have to wait until it shows up as a "sent" email?

Im seeing the same thing.
You can take a screenshot or copy/paste the email into Notes and then print from there.
If you want to see the feature added or leave any type of feedback for the iPad or anything Apple related, you can do it here -> Apple - Feedback

When i make search in my old email, when i want to open some of them for a lot i cant. For some no problem. There are emails from the same folder in same dates.

I search in my email something. When want to open the content from the emails, for some i can but for other i cant.
Same type of emails, same date, same attachments.

If you think getting your web pages to appear OK in all the major browsers is tricky then dealing with email clients is way worse. There are so many of them.
If you want to bulk email yourself, there are apps for it and their templates will work in most cases...
http://www.iwebformusicians.com/Website-Email-Marketing/EBlast.html
This one will create the form, database and send out the emails...
http://www.iwebformusicians.com/Website-Email-Marketing/MailShoot.html
The alternative is to use a marketing service if your business can justify the cost. Their templates are tested in all the common email clients...
http://www.iwebformusicians.com/Website-Email-Marketing/Email-Marketing-Service. html
"I may receive some form of compensation, financial or otherwise, from my recommendation or link."

In VB how do I pass my low and high limit results from a TestStand Step into the ResultList and how do I retrieve them from the same?

I am retrieving high and low limits from step results in VB code that looks something like this:
' (This occurs while processing a UIMsg_Trace event)
Set step = context.Sequence.GetStep(previousStepIndex, context.StepGroup)
'(etc.)
' Get step limits for results
Set oStepProperty = step.AsPropertyObject
If oStepProperty.Exists("limits", 0&) Then
dblLimitHigh = step.limits.high
dblLimitLow = step.limits.low
'(etc.)
So far, so good. I can see these results in
VB debug mode.
Immediately after this is where I try to put the limits into the results list:
'Add Limits to results
call mCurrentExecution.AddExtraResult("Step.Limits.High", "UpperLimit")
call mCurrentExecution.AddExtraResult("Step.Limits.Low", "LowerLimit")
(No apparent errors here while executing)
But in another section of code when I try to extract the limits, I get some of the results, but I do not get any limits results.
That section of code occurs while processing a UIMsg_EndExecution event and looks something like this:
(misc declarations)
'Get the size of the ResultList array
Call oResultList.GetDimensions("", 0, sDummy, sDummy, iElements, eType)
'Step through the ResultList array
For iItem = 0 To iElements - 1
Dim oResult As PropertyObject
Set oResult = oResultList.GetPropertyObject("[" & CStr(iItem) & "]", 0)
sMsg = "StepName = " & oResult.GetValString("TS.StepName", 0) & _
", Status = " & oResult.GetValString("Status", 0)
If oResult.Exists("limits", 0&) Then
Debug.Print "HighLimit: " & CStr(oResult.GetValNumber("Step.Limits.High", 0))
Debug.Print "LowLimit: " & CStr(oResult.GetValNumber("Step.Limits.Low", 0))
End If
'(handle the results)
Next iItem
I can get the step name, I can get the status, but I can't get the limits. The "if" statement above which checks for "limits" never becomes true, because, apparently the limit results never made it to the results array.
So, my question again is how can I pass the low and high limit results to the results list, and how can I retrieve the same from the results list?
Thanks,
Griff

Griff,
Hmmmm...
I use this feature all the time and it works for me. The only real
difference between the code you posted and what I do is that I don't
retrieve a property object for each TestStand object, instead I pass the
entire sequence context (of the process model) then retrieve a property
object for the entire sequence context and use the full TestStand object
path to reference sub-properties. For example, to access a step's
ResultList property called "foo" I would use the path:
"Locals.ResultList[0].TS.SequenceCall.ResultList[].Foo"
My guess is the problem has something to do with the object from which
you're retrieving the property object and/or the path used to obtain
sub-properties from the object. You should be able to break-point in the
TestStand sequence editor immediately after the test step in question
executes, then see the extra results in the step's ResultList using the
context viewer.
For example, see the attached sequence file. The first step adds the extra
result "Step.Limits" as "Limits", the second step is a Numeric Limit (which
will have the step property of "Limits") test and the third step pops up a
dialog if the Limits property is found in the Numeric Limit test's
ResultList. In the Sequence Editor, try executing with the first step
enalbled then again with the first step skipped and breakpoint on the third
step. Use the context viewer to observe where the Limits property is added.
That might help you narrow in on how to specify the property path to
retrieve the value.
If in your code, you see the extra results in the context viewer, then the
problem lies in how you're trying to retrieve the property. If the extra
results aren't there, then something is wrong in how you're specifying them,
most likely a problem with the AddExtraResult call itself.
One other thing to check... its hard to tell from the code you posted... but
make sure you're calling AddExtraResult on the correct execution object and
that you're calling AddExtraResult ~before~ executing the step you want the
result to show up for. Another programmer here made the mistake of assuming
he could call AddExtraResult ~after~ the step executed and TestStand would
"back fill" previously executed steps. Thats not the case. Also, another
mistake he made was expecting the extra results to appear for steps that did
not contain the original step properties. For example, a string comparison
step doesn't have a "Step.Limits.High" property, so if this property is
called out explicitly in AddExtraResult, then the extra result won't appear
in the string comparison's ResultList entry. Thats why you should simply
specify "Step.Limits" to AddExtraResul so the Limits container (whose
contents vary depending on the step type) will get copied to the ResultList
regardless of the step type.
I call AddExtraResult at the beginning of my process model, not in a UI
message handler, so there may be some gotcha from calling it that way. If
all else fails, try adding the AddExtraResult near the beginning of your
process model and see if the extra results appear in each step's ResultList.
Good luck,
Bob Rafuse
Etec Inc.
[Attachment DebugExtraResults.seq, see below]
Attachments:
DebugExtraResults.seq ‏20 KB

ITunes separates songs from the same album

when I import some CDs, iTunes doesn't recognize the songs as being part of the same album. How do I solve this?

Hi there Luis,
I would recommend that you review the process for importing CDs in iTunes 11 found in the article below.
iTunes 11 for Mac: Import songs from CDs
http://support.apple.com/kb/PH12278
Hope that helps,
Griff W.

How do I sync apps from the same iTunes account to an iPhone 3G and an iPhone 4S and keep correct version for each iOS?

I have an old 3G as well as a 4S. Initially I set up a separate iTunes account for the 4S as I was worried I'd lose my old apps for 3G (as older, compatible versions aren't kept in the iTunes store so once they're gone, they're gone...). 3G is set up to sync with iTunes, 4S is inly syncing mail and conatcts through Exchange but hasn't been synced with an iTunes library for the reason above.
Is there a way to sync both phones off the same iTunes account, so I can set up each phone with some music, as well as apps, without iOS 5 versions overwriting the exisitng apps for the 3G?
To complicate things further, I don't want to sync photos, contacts, messages, etc. I just want to avoid having to duplicate all my music and pay for all the apps all over again. Suggestions?
Cheers

Hi gail,
Thanks for the quick reply! The music part makes sense, good to know I don't have to duplicate the lot. The big question stillr emains as to whether iTunes can cope with two different iPhones, running different versions of the iOS, and therefore different app versions.
Currently all the apps in iTunes are years old, and many haven't updated in months (years?) because the 3G is running iOS 4.2.1 (and can't be upgraded). Many of these have since been updated in the iTunes store (for the various incarnations of iPhone since) and the old versions that my 3G requires have been replaced.
I'm worried that syncing the 4S running iOS 5, and running the most recent updates for same apps, will cause iTunes to overwrite the old 3G compatible ones when I sync. Unless iTunes is smart enough to know which version of the app is for which OS, without updating the legacy version when I update the apps on the 4S?
You guys shouldn't face that problem, as iPad and iPhone apps don't replace each other (I believe? Not sure about this) as new updates are released for each app, you'd have a copy for each device (for example Evernote for iPad, and Evernote for iPhone). I can't figure out if iTunes can handle keeping separate iPhone versions for Evernote iOS 4.2.1 and Evernote for iOS 5. My gut feeling is no, but I want to amke sure before I lose the legacy versions of each app.
Of course, maybe I'm just paranoid and iTunes is in fact perfectly capable of keeping old and new apps in the same library?
Cheers

How do i separate emails from the same person

Similar Messages

Maybe you are looking for