How do i set a data usage alert

How do I set a data usage alert?

This isn't a feature that's built into iOS.
Most carriers will send an alert before you reach your data cap and you can check your data usage in Settings > Usage > Cellular Usage.

Similar Messages

  • How to remove a data usage alert email address

    I receive email alerts when my data usage gets to 75%, 90%, and 100% of usage. How do I remove one of the email addresses these alerts are being sent to (it is not one of my email addresses)?

    Verizon_Dan
    I understand your desire to update which email addresses receive the data usage alerts.  I would love to assist.
    When you log into your My Verizon account online, you can edit your alert settings (email addresses and phone numbers) within the "Manage My Account" section of your online account.  Under the "Manage My Account" tab on the left, click the "Manage Family Safeguards & Controls" link.  Then, under the "Usage Controls" tab, click "View Details & Edit".  Lastly, under the "Usage Limits" tab you will then be able to edit the email addresses that you want to receive email alerts.  Please let me know how this works out for you.
    AnthonyTa_VZW
    Follow us on Twitter @VZWSupport
    If my response answered your question please click the "Correct Answer" button under my response. This ensures others can benefit from our conversation. Thanks in advance for your help with this!!

  • Error Report: No Data Usage Alerts for 250 MB Plan - June 2014

    Hi, this post will report a data usage alert error for June 2014.
    I previously signed up for data usage alerts when 50%, 75%, and 90% of my data is used. On June 10, at 11:00 PM, I discovered through my Verizon Wireless account that over 250 MB of data had already been used (my plan contains 250 MB). I did not receive any usage alerts prior to this time. I immediately upgraded to the 500 MB plan to avoid overage charges.
    If the data usage alerts had worked properly, I would not have faced the upgrade fee or overage charges. Would it be possible to cancel the additional charges that arose this month because the data usage alerts did not work properly? 
    Thank you!
    Hannah

    Are you serious!!!  Look at all of the calls on this matter in your records and fix it.  I am sure at this point that it is another Verizon scam to solicite millions of dollars from it's customers only to have yet another class action lawsuit filed so the lawyers can get rich and the customers screwed.
    AyaniB_VZW <[email protected]> wrote:
    AyaniB_VZW  created the discussion
    "How to Stop False Data Usage Alerts?"
    To view the discussion, visit: https://community.verizonwireless.com/message/1219549#1219549
    >

  • How can I set the data binding between Web Dynpro & Database table

    Dear friend,
    I am a beginner of Web Dynpro. I want to develop my simple project like these:
    1. Create my own database table via Dictionary Project such as TAB_USER and have 3 fields: USER_ID, USER_NAME, USER_POSITION and I have already deployed & archived it.
    2. Create my own Web Dynpro Project, and create the input fields as User ID, User name, User position and icon 'Save' on the selection screen and I have deployed it already.
    For the process, I want to input data at the screen and save the data in the table, please give me the guide line like these:
    1. How can I set the data binding between Web Dynpro and Database table ?
    2.  Are there any nescessary steps that I will concern for this case?
    Sorry if my question is simple, I had try  to find solution myself, but it not found
    Thanks in advances,
    SeMs

    Hi,
    You can write your own connection class for establishing the connection with DB.
    Ex:
    public class  ConnectionClass {
    static Connection con = null;
    public static Connection getConnection() {
    try{
    Context ctx = new InitialContext();
    DataSource ds = (DataSource) ctx.lookup("jdbc/TSPAGE");
    con = ds.getConnection();
    return con;
    }catch(Exception e){
    return null;
    You can place the above class file in src folder and you can use this class in webdynpro.
    You can have another UserInfo class for reading and writing the data into the DB .
    Regards, Anilkumar
    PS : Refer
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/webas/java/simple java bean generator for database.pdf
    Message was edited by: Anilkumar Vippagunta

  • How can i set the date time year to my i pod

    how can i set the date time year to my i pod touch

    Hello Theodora,
    You can do this via your iPod's Settings application.
    B-rock

  • How can I set document date automatically as system date?

    I use FBV1, FBV2, F-02, FB02. Posting date is automatically set as system date. I want to set document date automatically as system date.
    How can I set document date automaticall as system date?
    Wbr.
    İlker Çokkeçeci
    Computer Engineer
    Ankara, Turkey

    Hi Expert,
    Please refer the below link..
    Document date to be defaulted as system date for all FI transactions
    as there mentioned, please go to T-Code: SHD0.
    Regards,
    GK
    SAP

  • How to fix background wifi data usage in iphone6 iOS 8.1.1 when connecting to wifi?

    How to fix background wifi data usage in iphone6 iOS 8.1.1 when connecting to wifi?

    Hi
    I have Iphne 4s/5.0.1 and I'm also stuck with same problem from last 5 days. I have restored/backup/updated the phone as many times as possible. I have been with Vodafone Customer Care (India) and now everyone knows my problem there, but there is no solution.
    I have read and tried most of the solutions provided here. Please help me out.
    Problem -
    1. 3G / Edge working when restore as new phone
    2. 3G / Edge stops working as soon as backup is restored
    3. Copied and verified both of the files (8218978e4ab0a48035bb92653145a6be872ea858 (Restored new iphone & Restored backup iphone) have different settings. Replacing part of this file or even complete text of this file, changes the date/time stamp of file and on backup restoration it says "Corrupt backup" and phone restarts.
    4. I dont want to Jailbreak the phone
    5. Using any third party software to install new APN says "Only One APN can be installed"
    6. Profile doesnt show any other APN
    Is there any other way to delete this file (com.apple.managedCarrier.plist) or just change the section where in string value is "Portalnmms" to required value "iphone" along with key?
    Please help me out.
    thanks

  • The data usage alerts seem to be a rip off!

    So, on the 13th I got text messages saying that we used up all data in our plan and that we either sign up for an increased allowance for $10 / month or pay $15 for an additional GB for that period. I almost was tempted to sign up, but then didn't.
    Well, we got the bill and turns out we were actually still UNDER our allowance by several hundred MB by the 16th, so on the 13th it would have been even lower.
    I think it's a rip off if you send people a note that they used up all their data telling them to reply now to increase their allowance if in reality they're still well below.

    I use this app.  It does measure all data in and out, and because of that you will see its totals higher than the phone or Verizons data widget count since MMS is data, but doesnt count towards data allotment. It keeps me on track. It has plan and alarm settings to cut off your data when you reach certain thresholds versus Verizon just sending out a text alert, but not disabling data.My Data Manager - Data Usage - Android Apps on Google Play
    I typically set 3 alarms:  1 for a daily (Data amount divided by 31 days)
    1 for 50% and
    1 for 85-90%.
    You can always re-enable mobile data if it cuts you off and it will continue to monitor your usage.

  • How do I monitor my data usage

    How do you find out what apps are running when you're not using the phone?

    Settings > General > Background App Refresh allows you to enable/disable Background App Refresh entirely or by app.
    Settings > Cellular > Use Cellular Data For allows you to see how much cellular data has been used by apps and by specific system services since you last reset the statistics there.
    Also, some carriers (Verizon for one) allow you to set thresholds (e.g., 50%, 75% of data plan reached, etc) where they will automatically warn you re your data usage.

  • How do I set up Calendar events alerts on my iPhone 4s?

    I have a recurring event in my Calendar app on my iPhone 4s. How do I set an alert (i.e. it tells me the day of, etc.)?

        tlee11333,
    I hope all is going well for you while you are traveling in China. I am sorry to hear that you are experiencing issues with your device but have no fear help is here! Provided below is a link to our global support website with some additional information regarding your devices use while in China http://bit.ly/R5Gl0x. In addition if you need to get in contact with our Global Support Team at 908-559-4899. I hope this information was helpful and I hope you have a great trip!
    Thank you,
    Georgep_VZW
    Follow us on Twitter @VZWSupport

  • How can I set a Date

    Can someone please help me ?
    I need to set a date variable, with a resultset date field, and then set a GregorianCalendar.
    This code works ok :
    java.util.Date MyDate;
    GregorianCalendar gc = new GregorianCalendar();
    MyDate = new java.util.Date(); //default value
    gc.setTime(MyDate);
    But this code doesn't work :
    java.util.Date MyDate;
    MyDate = new java.util.Date(objResultSet.GetDate("DateField"));
    or
    MyDate = new java.util.Date(objResultSet.GetString("DateField"));
    and then, set the calendar.
    How can I do this ?
    Thanks

    Sorry, for any reason if I set two variables with the same field, the second time cath an error.
    For example, this code works ok :
    //only one time
    MyDate = objResultSet.GetDate("DateField");
    //if I use two times the same field, it doesn't work
    strDate = = objResultSet.GetString("DateField");
    MyDate = objResultSet.GetDate("DateField");
    I don't know what.
    Thanks for help !!!!!

  • How can I set the date of my PC using Java?

    Which class has the function to set system date and time.
    Thanks in advance.

    but the following sentence
    Process p=Runtime.getRuntime().exec("date
    11-03-2002");
    always throw IOExecption error
    java.io.IOException: CreatePreocess:date 11-03-2002
    error=0
    and why?
    How to settle it?
    'date' is an internal command which means you need a shell to run it. Depending on the OS this will either be 'cmd' or 'command'. If you search the forums with the following keywords you will find examples on how to use this: "exec", "Runtime", "cmd" or "command"

  • How can you set Dos date as YYYYMMDD in After Action script?

    Hellos...
    I have been trying the standard method to get the DOS date as a format string YYYYMMDD
    It seems to cause the AfterAction script to bomb.
    I am trying this script ...
    <?xml version='1.0' encoding='UTF-8'?>
    <!DOCTYPE Waveset PUBLIC 'waveset.dtd' 'waveset.dtd'>
    <Waveset>
    <ResourceAction name='ISSHP-enable-email'>
    <ResTypeAction restype='Windows Active Directory' timeout='60000'>
    <act>
    rem Action for MSE2007 test/development to Enable-Mailbox a new AD User created by IDM.
    rem Set up environment as necessary (copy of idmadm account's environment)
    rem Local script environment settings
         SET LogFileDrive=C
    SET LogFileDir=%LogFileDrive%:\Sun\ADAfterActionsLog\
    SET DBtoUse=idmex.sks.local\Mailbox Database
    rem set TODAYDATE as yyyyddmm and TIMENOW as hhmmssdd to be used in the Log file name
         set TIMENOW=%time:~0,2%%time:~3,2%%time:~6,2%%time:~9,2%
         for /F "tokens=2-4 delims=. " %i in ('date /t') do set TODAYDATE=%k%j%i
    set >> %LogFileDir%AfterActionLog.txt
    rem PS Commands from here...
    exit
    </act>
    </ResTypeAction>
    </ResourceAction>
    </Waveset>
    But the line
    for /F "tokens=2-4 delims=. " %i in ('date /T') do set TODAYDATE=%k%j%i
    is causing problems..
    How have others managed to turn date /T into YYYYMMDD within an after action ??
    I know in our Gateway date /T will output (today): pe 29.01.2010
    GF

    The output from the for command when run in the cmd shell is as expected.
    I have tried both batch and command line variable settings in my action script i.e.
    for /F "tokens=2,3,4 delims=. " %i in ('date /T') do echo %k%j%i
    and
    for /F "tokens=2,3,4 delims=. " %%i in ('date /T') do echo %%k%%j%%i
    with no joy. I suspect that its the Gateway launched shell executor that is having problems with the for do command.
    Anyways, using
    set todaysdate=%date:~9,4%%date:~6,2%%date:~3,2%
    solves my problem. Just curious why the for construct bombs in the resource action.
    Thanks. GF

  • How do I set a data limit on my Verizon Jetpack MiFi 5510L?

    I bought a Jetpack with 16 GB a month. I don't like the idea of Overage charges. even though I have been using my data safely. I've currently used 12 GB from a 12/19 - 1/19 cycle with 5 wifi devices. But soon, I will not be here to monitor the data usage for my family members and I'm afraid it will spike when I'm gone. So I want to set my jetpack to automatically stop when it hits 16 gb. is there some option to prevent the data from going past the limit?

        Setting up data limits are easier than ever KeatonTS! May I ask are you subscribed to Family Base? If so then you can add and change the data allowance on you jetpack as you see fit. Here's a link to help you out with this amazing service.
    http://www.verizonwireless.com/support/verizon-familybase-and-usage-controls/
    Thank you…
    ArnettH_VZW
    Follow us on Twitter @VZWSupport

  • How do I set up an email Alert for a Calendar event?

    I can't figure out how to set up an email Alert for a Calendar event at icloud.com or on an iOS device.  Am I missing something?

    Try this support article Dave..
    iCloud: Calendar Events, Reminders, To Dos, and Tasks behavior differs by application

Maybe you are looking for