How do I set a guest password on my media hub?

Page 43 of the NMH405 media hub manual indicates that you can set a guest password on users.  It is supposed to be under settings\system and although I see all the other settings under system, that one isn’t there.  Maybe they cut the feature at the last minute.  I'm running 3.18.15 of the firmware.
My ultimate goal is to have one account that I can use to write new content to the server and one that is read only for my family.  I'm worried right now that they will delete the content (which they have done). 
Any advice or workarounds to achieve this would be appreciated.
Thanks,
Peter
Th

Guest access can only be used if you'll be accessing the media hub remotely. Network Media Hub also lacks multiple user access. 
You may refer to these articles about your Network Media Hub: 
- Article ID: 19717: Accessing the Media Hub Remotely as a Guest
- Article ID: 19714: Creating a Guest Password for Remote Access to the Media Hub
- Article ID: 17571: Media Hub Lacks Multiple Users
If everyone needs to believe in something, I believe I'll have another beer..

Similar Messages

  • How do I set up guest password

    How do I set up a guest password on my MacBook Pro
    I have a password for my personal use, but never set up a password for guests

    I have a valid reason for wanting both an account with a password AND a fresh environment every login.
    See this post: how can I set up password-protected Guest account
    Do you know how to set up an account with a refreshed environment every time?

  • How do I set the firmware password on 10.7

    Hi
    How do I set the firmware password in Mac OS 10.7.2 (MacBook Pro) ?
    The Apple instructions only seem to go up to 10.5.x
    Thanks

    Firmware password is not much use as any thief can reset it by pulling out the memory chips and putting them back in again.
    The only real way to secure your data 99% is to use FileVault 2.

  • How can I set up a password to open each email account to keep privacy?

    Hello,
    Different members of the family are using the same ipad. How can I set up a password for each email account to keep privacy ?
    Thanks
    Dx

    You can not - it's a single-account device, including email, so you can't set up seperate passwords for seperate emails. All or nothing, I'm afraid.

  • How do I set up a password

    How do I set up a password for my airport extreme network?

    AirPort Extreme Base Station Setup (AEBSn) - Wireless Encryption
    Setup the AEBSn
    Either connect to the AEBSn's wireless network or temporarily connect your computer directly (using an Ethernet cable) to one of the LAN ports of the AEBSn, and then, using the AirPort Utility in Manual Mode, check these settings:
    Manual Setup > AirPort > Wireless tab
    Wireless Security: <None | WEP (Transitional Security Network) | <b>WPA/WPA2 Personal</b> | WPA2 Personal>
    Wireless Password: <enter your desired password>
    Verify Password: <reenter your desired password>

  • How can I set the guests to auto start after the primary reboots?

    For version 1.2 of LDOM software, how do I set the guests to automatically start after I reboot the primary? Right now if I do this:
    ldm stop -f guest1
    reboot primary
    guest1 will be bound and manually started with ldm start
    ldmd is set to start at boot.
    Thanks, Kevin

    Try running ldm set-var auto-boot\?=true guest1This will set the LDOM guest openboot parameter "auto-boot" to true and it should boot automatically when the Primary restarts.
    Steve

  • HT1904 How do you set an administrator password?

    How do you set an administrator password?

    Changing or resetting an account password
    http://support.apple.com/kb/HT1274?viewlocale=en_US
    Changing your administrator password
    http://docs.info.apple.com/article.html?path=Mac/10.4/en/mh655.html
    You should update to 10.4.11 as well.

  • How do I set an administrative password?

    How do I set an administrative password?

    Judy,
    from your administrative login, select the Users & Groups pane of System Preferences, and click the “Change Password…” button.

  • How do you set up a password for a wireless network when using an Airport Extreme?

    How do you set up a password for a wireless network when using an Airport Extreme wireless router?

    Thanks for the updated information.
    Open Macintosh HD > Applications > Utilities > AirPort Utility
    Click on the AirPort Extreme icon, then click Manual Setup
    Click the Wireless tab below the row of icons
    Check to make sure that the setting for Wireless Security reads either WPA2 Personal or WPA/WPA2 Personal
    Enter a Wireless Password and Verify Password
    Click Update to save any changes and wait a full minute for the AirPort Etreme to restart

  • How do you set a security password to control access to an external hard drive?

    how do you set a security password to control access to an external hard drive?

    The only way to reliably protect data, especially on an external hard drive, is to encrypt it.  Permissions don't have to be respected.  One way to encrypt data is to create an encrypted sparse bundle disk image with Disk Utility.  See:
    http://support.apple.com/kb/HT1578
    (Be sure to use the 256-bit encryption.)
    Alternately, you could use some whole-disk encryption, though I have no experience with any of the software for doing that.  You could try the following:
    http://www.truecrypt.org/
    I don't know that I would recommend the product being advertised inappropriately by keynesis.

  • HT203790 How do I set a backup password?

    How can I set my backup password now, before I discover I haven't and cannot access my info?

    I think you mean that your backup has a password, and you don't know what it is. You cannot change the backup password if you don't know the current one; if you could there would be no point in having encrypted backups. You will have to guess the current backup password. It is one that you know and have used in the past, because you entered it. To speed up the process uncheck "Encrypt backup" in iTunes. You will be prompted immediately for the password.
    If I misinterpreted your question please set me straight.

  • TS3274 how do I set a new password?

    How do I set a new Password?

    Do you mean a new passcode on your iPad?  If it is disabled you will have to restore it via recovery mode using the recovery mode instructions in http://support.apple.com/kb/HT1808 or with iOS 7.0.4 you can also use the guidance of lllaass in https://discussions.apple.com/thread/5634135

  • How to set up guest password?

    I still cannot figure out how to set up a guest password on my wireless network.  I'm trying to use 192.168.1.1 but dont see an obvious place to set the information.  And do I have to connect to router to the laptop before making the changes?

    Well what model number router do you have?  If it is a E series you must load and run the Cisco Connect software to configure the Guest Network.

  • How do I set up a password on my WRT54GS?

    I have been using my wireless router for a couple of years and never bothered to set up a password... When I am away from home and try to use either my lap top or IPod Touch to connect to a wireless network, I notice that I need to enter a password to be allowed to do it... I would like to set up something similar in my wireless router so that anyone in my neighborhood attempting to use my wireless network has to enter a password before being able to do it.  How can I set this up?  I have no idea and would appreciate any help.... Thanks!

    1st it is suggested you do these steps on a hardwired PC.
    Step 1: Access the routers web based utility interface. To do this, open up Internet Explorer or any web browser and then type on the address bar http://192.168.1.1 (username just leave it blank, password as a default is admin).
    Then click on WIRELESS and then WIRELESS SECURITY.
    Step 2:
    Select WPA Personal under the Security Mode drop-down menu.
    Enter your desired WPA Key on the WPA Shared Key field such as “MySecretKey.” This will serve as your network key whenever you connect to your wireless network.
    NOTE: Do not give this key to anyone. This key will secure your wireless network. Leave Group Key Renewal to 3600 seconds.
    Then save the settings and you are good to go from there.

  • How do I set up a password to protect my computer at Start Up?

    Hi all.
    When I set up my Mac I set up a password, which I need to type in each time I install software.
    But, how can I have a password there so that each time the computer is turned on, or wakes from sleep you have to type in the password. I.E. I don't want colleges to be able to see my things when I'm not around.
    Thanks.

    Go to System Preferences>Accounts>Password. Click on the lock in the bottom left-hand corner and type your password at the prompt. Select your account and click 'Login Options'. Uncheck 'Automaically log in as...'

Maybe you are looking for

  • Deleting anchored frames

    Hello all, What happens with a linked list of objects when I use the Delete method on one of these objects ? The FrameMaker Scripting Guide does not say much about this, nor does the FDK reference guide. I have tried the following but it does not wor

  • How to output a postscript file with .ps extension name in jsp?

    Hi, I could use a servlet to output a postscript file with .ps file extension name. But I tried to do the same with jsp, for some reason, jsp always outputs a file with .jsp extension name though the content is postscript. Could anyone help me on thi

  • ESS Time Statement Report not Active?

    I am running ERP2004 ESS with IDES. I think were on SP9. I have adobe document services installed and its working ok with other reports, however when I try to run the Time Statement report I get an error "Print program not activated for form SAP_TIM_

  • Charged for free app???

    I purchased on app on App Store via my iPhone, it was free. However I later recieved an e-mail saying that I have been charged. Has it taken my money?? The app was BBM btw.

  • I have a therory and need some tech heads and CL to give it a t

    Ok, the popping and crackling issue many have has gone on? long enough I would think. So I am thinking could it possiably be a power issue?What I mean is, like any kind of device that uses power if it is not getting the FULL required amount then what