How do I set an Audio Alert for Low Battery?
Is there a way to set an audio alert for a very low battery?
there might be an app for that, but there is no built in feature already on the mac like that.
Similar Messages
-
How do you set up the alert for FaceTime with sound
How do you set up the alert for FaceTime with sound?
Using FaceTime http://support.apple.com/kb/ht4319
Troubleshooting FaceTime http://support.apple.com/kb/TS3367
The Complete Guide to FaceTime: Set-up, Use, and Troubleshooting Problems
http://tinyurl.com/32drz3d
Troubleshooting FaceTime and iMessage activation
http://support.apple.com/kb/TS4268
Cheers, Tom -
How do you set up repeating alerts for a new voicemail
how do you set up repeating alerts for a new voicemail
makblv wrote:
Please, Apple, offer this convenience to your loyal customers. Thank you.
If you want Apple to know how you feel, Submit your feedback directly using the appropriate link on the Feedback page:
http://www.apple.com/feedback -
How do I set individual sound alerts for multiple email accounts?
How do I set individual sound alerts for multiple email accounts?
Here: http://www.guidingtech.com/15275/get-different-notifications-per-mail-account-io s-6/
Long and short of it, the settings can be individually changed under Notifications. Select Mail and then the account you want to change the sound to. -
How do I set up multiple alerts for one event?
So, I'm currently using MS Exchange to sync my google calendar with my iphone5, and almost everything's working pretty nicely, events would get pushed to my phone right away as I put it on my computer. But the thing is, my phone will only alert me for the earliest alert if I had multiple alerts set up for one event on google calendar. How can I fix it? Any advice would be appreciated!
I have a similar issue with a slight twist.
I have 'My Card' setup properly, however, I do have 5 email addresses that I use and these are listed on 'My Card'. When I select the option to add an email alert on a calendar event, the app is picking up two addresses from the set of 5 and makes me pick one.
I would like to select one of the other addresses to be the default for sending out the alerts. Is there a way to do that. If it is helpful, the app is picking up 2 of the 'Work' email addresses. I don't know if the home vs work designation would make a difference.
Note: I am looking for a solution to pick one a specific address from the contact card to send out the alert email. I am NOT looking to have a discussion as to why I have 5 addresses.
Thanks -
How do I get an audio alert for Face Time?
I cannot get my iPad to alert me with incoming calls on Face Time?
there might be an app for that, but there is no built in feature already on the mac like that.
-
How do I set the default time for calendar alerts?
How do I set the default time for calendar alerts? I always want to have an alert 15 minutes before my appointments. I don't want to have to manually set it each time I make an appointment (I just moved to iphone from a windows mobile where this was basic stuff so I apologise if this is a noob question).
I have the same issue. I've searched these forums and found lots of people who have asked this same question, but nobody who has received an answer.
About a year ago, I migrated from a Windows PC and a Blackberry (both of which had very simple default alert options) to a MacBook Pro and an iPhone and have yet to find a solution on this forum or from any of my Apple-savvy friends. Very discouraging. -
How to set up text alerts for contacts
How do you set up ring tones for contacts? Besides going to contacts. I know in the S4 there was a setting under contacts to make text tones different for each contact. How do you set it up?
ThanksI believe I found it.
-
How can I set a point size for staticTexts
Hi everyone
How can I set a point size for staticTexts?
staticTexts.add({staticLabel:"Please select a tedious job"});
thanks
TeetanThank you Vandy
Thank you pixxxel schubser
And thank you Peter Kahrel
But Ho can call function for this script?
//======================================================================
Thank you Vandy
Thank you pixxxel schubser
And thank you Peter Kahrel
But Ho can call function for this script?
//======================================================================
var stringList = [
"01. digit at end: superscript",
"02. digit at beginning: superscript",
"03. notes applied to italic (table only)",
"04. Initial Cap+ markup",
"05. Small Cap + markup",
"06. del [ ] + markup",
"07. add an EM at beginning",
var win = new Window("dialog","Tedious Jobs_(\"TDJs\")");
this.windowRef = win;
win.grp = win.add ("group", undefined);
win.grp.alignChildren = "top";
win.grp.margins = 5;
win.grp2 = win.grp.add ("group", undefined);
win.grp2.orientation = "Column";
win.grp2.alignChildren = "left";
win.grp3 = win.grp.add ("group", undefined);
win.grp3.orientation = "Column";
win.grp3.alignChildren = "fill";
win.grp2.Txt1 = win.grp2.add ("statictext", undefined, "Please select a tedious job");
win.grp2.Txt1.indent = 0;
win.grp2.Ddl1 = win.grp2.add ("dropdownlist", undefined, stringList);
win.grp2.Ddl1.selection = 0;
win.grp2.sTxt1 = win.grp2.add ("statictext", undefined, "________________________________________");
win.grp2.sTxt3 = win.grp2.add ("statictext", undefined, "Be careful and pay attention in what you selected.");
win.grp2.sTxt3.graphics.font = ScriptUI.newFont ("Arial", "Regular", 10);
win.quitBtn = win.grp3.add("button", undefined, "Ok");
win.cancelBtn = win.grp3.add("button", undefined, "Cancel");
win.defaultElement = win.quitBtn;
win.cancelElement = win.cancelBtn;
win.quitBtn.onClick = function() {
win.close();
if (w.show() == 1) {
var mRes = mStringList.selection.text;
mSelection = mStringList.selection.index;
app.insertLabel( "mDialog", mSelection.join() ); // to store dropDownList positions (as a string "," delimited)
return mRes;
} else { exit(); }
app.doScript('main()', ScriptLanguage.JAVASCRIPT, undefined, UndoModes.FAST_ENTIRE_SCRIPT, "TDJs");
function main(){
var myObject;
var myCheckSelection = false;
if(app.documents.length > 0){
if(app.selection.length > 0){
switch(app.selection[0].constructor.name){
case "InsertionPoint":
case "Character":
case "Word":
case "TextStyleRange":
case "Line":
case "Paragraph":
case "TextColumn":
case "Text":
case "Cell":
case "Column":
case "Row":
case "Table":
mySelected = app.insertLabel( "mDialog", String(mySelection.selectedIndex) ); // to remember selection’s set
if(app.selection && app.selection[0].hasOwnProperty ("tedious_works") );
tedious_works();
else{
alert("Wrong selection. Please try again.");
function tedious_works() {
app.findGrepPreferences = app.changeGrepPreferences = null;
switch (mySelection.selectedIndex){
case 1: {
app.findGrepPreferences.findWhat = "^\\d";
app.changeGrepPreferences.position = 1936749411;
app.selection[0].changeGrep();
app.findGrepPreferences = app.changeGrepPreferences = null;
break;
case 2:{
app.findGrepPreferences.findWhat = "(?i)\\(note.+\\)$";
app.changeGrepPreferences.appliedCharacterStyle = "Italic";
app.selection[0].changeGrep();
app.findGrepPreferences = app.changeGrepPreferences = null;
app.findGrepPreferences.findWhat = "（附[註注].+）$";
app.changeGrepPreferences.appliedCharacterStyle = "Italic";
app.selection[0].changeGrep();
app.findGrepPreferences = app.changeGrepPreferences = null;
break;
case 3:{
app.findGrepPreferences = app.changeGrepPreferences = null;
app.findGrepPreferences.findWhat = "\\<a";
app.changeGrepPreferences.changeTo = "A";
app.changeGrepPreferences.underline = true;
app.selection[0].changeGrep();
app.findGrepPreferences = app.changeGrepPreferences = null;
app.findGrepPreferences = app.changeGrepPreferences = null;
app.findGrepPreferences.findWhat = "\\<b";
app.changeGrepPreferences.changeTo = "B";
app.changeGrepPreferences.underline = true;
app.selection[0].changeGrep();
app.findGrepPreferences = app.changeGrepPreferences = null;
app.findGrepPreferences = app.changeGrepPreferences = null;
app.findGrepPreferences.findWhat = "\\<c";
app.changeGrepPreferences.changeTo = "C";
app.changeGrepPreferences.underline = true;
app.selection[0].changeGrep();
app.findGrepPreferences = app.changeGrepPreferences = null;
app.findGrepPreferences = app.changeGrepPreferences = null;
app.findGrepPreferences.findWhat = "\\<d";
app.changeGrepPreferences.changeTo = "D";
app.changeGrepPreferences.underline = true;
app.selection[0].changeGrep();
app.findGrepPreferences = app.changeGrepPreferences = null;
app.findGrepPreferences = app.changeGrepPreferences = null;
app.findGrepPreferences.findWhat = "\\<e";
app.changeGrepPreferences.changeTo = "E";
app.changeGrepPreferences.underline = true;
app.selection[0].changeGrep();
app.findGrepPreferences = app.changeGrepPreferences = null;
app.findGrepPreferences = app.changeGrepPreferences = null;
app.findGrepPreferences.findWhat = "\\<f";
app.changeGrepPreferences.changeTo = "F";
app.changeGrepPreferences.underline = true;
app.selection[0].changeGrep();
app.findGrepPreferences = app.changeGrepPreferences = null;
app.findGrepPreferences = app.changeGrepPreferences = null;
app.findGrepPreferences.findWhat = "\\<g";
app.changeGrepPreferences.changeTo = "G";
app.changeGrepPreferences.underline = true;
app.selection[0].changeGrep();
app.findGrepPreferences = app.changeGrepPreferences = null;
app.findGrepPreferences = app.changeGrepPreferences = null;
app.findGrepPreferences.findWhat = "\\<h";
app.changeGrepPreferences.changeTo = "H";
app.changeGrepPreferences.underline = true;
app.selection[0].changeGrep();
app.findGrepPreferences = app.changeGrepPreferences = null;
app.findGrepPreferences = app.changeGrepPreferences = null;
app.findGrepPreferences.findWhat = "\\<i";
app.changeGrepPreferences.changeTo = "I";
app.changeGrepPreferences.underline = true;
app.selection[0].changeGrep();
app.findGrepPreferences = app.changeGrepPreferences = null;
app.findGrepPreferences = app.changeGrepPreferences = null;
app.findGrepPreferences.findWhat = "\\<j";
app.changeGrepPreferences.changeTo = "J";
app.changeGrepPreferences.underline = true;
app.selection[0].changeGrep();
app.findGrepPreferences = app.changeGrepPreferences = null;
app.findGrepPreferences = app.changeGrepPreferences = null;
app.findGrepPreferences.findWhat = "\\<k";
app.changeGrepPreferences.changeTo = "K";
app.changeGrepPreferences.underline = true;
app.selection[0].changeGrep();
app.findGrepPreferences = app.changeGrepPreferences = null;
app.findGrepPreferences = app.changeGrepPreferences = null;
app.findGrepPreferences.findWhat = "\\<l";
app.changeGrepPreferences.changeTo = "L";
app.changeGrepPreferences.underline = true;
app.selection[0].changeGrep();
app.findGrepPreferences = app.changeGrepPreferences = null;
app.findGrepPreferences = app.changeGrepPreferences = null;
app.findGrepPreferences.findWhat = "\\<m";
app.changeGrepPreferences.changeTo = "M";
app.changeGrepPreferences.underline = true;
app.selection[0].changeGrep();
app.findGrepPreferences = app.changeGrepPreferences = null;
app.findGrepPreferences = app.changeGrepPreferences = null;
app.findGrepPreferences.findWhat = "\\<n";
app.changeGrepPreferences.changeTo = "N";
app.changeGrepPreferences.underline = true;
app.selection[0].changeGrep();
app.findGrepPreferences = app.changeGrepPreferences = null;
app.findGrepPreferences = app.changeGrepPreferences = null;
app.findGrepPreferences.findWhat = "\\<o";
app.changeGrepPreferences.changeTo = "O";
app.changeGrepPreferences.underline = true;
app.selection[0].changeGrep();
app.findGrepPreferences = app.changeGrepPreferences = null;
app.findGrepPreferences = app.changeGrepPreferences = null;
app.findGrepPreferences.findWhat = "\\<p";
app.changeGrepPreferences.changeTo = "P";
app.changeGrepPreferences.underline = true;
app.selection[0].changeGrep();
app.findGrepPreferences = app.changeGrepPreferences = null;
app.findGrepPreferences = app.changeGrepPreferences = null;
app.findGrepPreferences.findWhat = "\\<q";
app.changeGrepPreferences.changeTo = "Q";
app.changeGrepPreferences.underline = true;
app.selection[0].changeGrep();
app.findGrepPreferences = app.changeGrepPreferences = null;
app.findGrepPreferences = app.changeGrepPreferences = null;
app.findGrepPreferences.findWhat = "\\<r";
app.changeGrepPreferences.changeTo = "R";
app.changeGrepPreferences.underline = true;
app.selection[0].changeGrep();
app.findGrepPreferences = app.changeGrepPreferences = null;
app.findGrepPreferences = app.changeGrepPreferences = null;
app.findGrepPreferences.findWhat = "\\<(?<!’)s";
app.changeGrepPreferences.changeTo = "S";
app.changeGrepPreferences.underline = true;
app.selection[0].changeGrep();
app.findGrepPreferences = app.changeGrepPreferences = null;
app.findGrepPreferences = app.changeGrepPreferences = null;
app.findGrepPreferences.findWhat = "\\<t";
app.changeGrepPreferences.changeTo = "T";
app.changeGrepPreferences.underline = true;
app.selection[0].changeGrep();
app.findGrepPreferences = app.changeGrepPreferences = null;
app.findGrepPreferences = app.changeGrepPreferences = null;
app.findGrepPreferences.findWhat = "\\<u";
app.changeGrepPreferences.changeTo = "U";
app.changeGrepPreferences.underline = true;
app.selection[0].changeGrep();
app.findGrepPreferences = app.changeGrepPreferences = null;
app.findGrepPreferences = app.changeGrepPreferences = null;
app.findGrepPreferences.findWhat = "\\<v";
app.changeGrepPreferences.changeTo = "V";
app.changeGrepPreferences.underline = true;
app.selection[0].changeGrep();
app.findGrepPreferences = app.changeGrepPreferences = null;
app.findGrepPreferences = app.changeGrepPreferences = null;
app.findGrepPreferences.findWhat = "\\<w";
app.changeGrepPreferences.changeTo = "W";
app.changeGrepPreferences.underline = true;
app.selection[0].changeGrep();
app.findGrepPreferences = app.changeGrepPreferences = null;
app.findGrepPreferences = app.changeGrepPreferences = null;
app.findGrepPreferences.findWhat = "\\<x";
app.changeGrepPreferences.changeTo = "X";
app.changeGrepPreferences.underline = true;
app.selection[0].changeGrep();
app.findGrepPreferences = app.changeGrepPreferences = null;
app.findGrepPreferences = app.changeGrepPreferences = null;
app.findGrepPreferences.findWhat = "\\<y";
app.changeGrepPreferences.changeTo = "Y";
app.changeGrepPreferences.underline = true;
app.selection[0].changeGrep();
app.findGrepPreferences = app.changeGrepPreferences = null;
app.findGrepPreferences = app.changeGrepPreferences = null;
app.findGrepPreferences.findWhat = "\\<z";
app.changeGrepPreferences.changeTo = "Z";
app.changeGrepPreferences.underline = true;
app.selection[0].changeGrep();
app.findGrepPreferences = app.changeGrepPreferences = null;
break;
case 4:{
app.findGrepPreferences = app.changeGrepPreferences = null;
app.findGrepPreferences.findWhat = "\\<A";
app.changeGrepPreferences.changeTo = "a";
app.changeGrepPreferences.underline = true;
app.selection[0].changeGrep();
app.findGrepPreferences = app.changeGrepPreferences = null;
app.findGrepPreferences = app.changeGrepPreferences = null;
app.findGrepPreferences.findWhat = "\\<B";
app.changeGrepPreferences.changeTo = "b";
app.changeGrepPreferences.underline = true;
app.selection[0].changeGrep();
app.findGrepPreferences = app.changeGrepPreferences = null;
app.findGrepPreferences = app.changeGrepPreferences = null;
app.findGrepPreferences.findWhat = "\\<C";
app.changeGrepPreferences.changeTo = "c";
app.changeGrepPreferences.underline = true;
app.selection[0].changeGrep();
app.findGrepPreferences = app.changeGrepPreferences = null;
app.findGrepPreferences = app.changeGrepPreferences = null;
app.findGrepPreferences.findWhat = "\\<D";
app.changeGrepPreferences.changeTo = "d";
app.changeGrepPreferences.underline = true;
app.selection[0].changeGrep();
app.findGrepPreferences = app.changeGrepPreferences = null;
app.findGrepPreferences = app.changeGrepPreferences = null;
app.findGrepPreferences.findWhat = "\\<E";
app.changeGrepPreferences.changeTo = "e";
app.changeGrepPreferences.underline = true;
app.selection[0].changeGrep();
app.findGrepPreferences = app.changeGrepPreferences = null;
app.findGrepPreferences = app.changeGrepPreferences = null;
app.findGrepPreferences.findWhat = "\\<F";
app.changeGrepPreferences.changeTo = "f";
app.changeGrepPreferences.underline = true;
app.selection[0].changeGrep();
app.findGrepPreferences = app.changeGrepPreferences = null;
app.findGrepPreferences = app.changeGrepPreferences = null;
app.findGrepPreferences.findWhat = "\\<G";
app.changeGrepPreferences.changeTo = "g";
app.changeGrepPreferences.underline = true;
app.selection[0].changeGrep();
app.findGrepPreferences = app.changeGrepPreferences = null;
app.findGrepPreferences = app.changeGrepPreferences = null;
app.findGrepPreferences.findWhat = "\\<H";
app.changeGrepPreferences.changeTo = "h";
app.changeGrepPreferences.underline = true;
app.selection[0].changeGrep();
app.findGrepPreferences = app.changeGrepPreferences = null;
app.findGrepPreferences = app.changeGrepPreferences = null;
app.findGrepPreferences.findWhat = "\\<I";
app.changeGrepPreferences.changeTo = "i";
app.changeGrepPreferences.underline = true;
app.selection[0].changeGrep();
app.findGrepPreferences = app.changeGrepPreferences = null;
app.findGrepPreferences = app.changeGrepPreferences = null;
app.findGrepPreferences.findWhat = "\\<J";
app.changeGrepPreferences.changeTo = "j";
app.changeGrepPreferences.underline = true;
app.selection[0].changeGrep();
app.findGrepPreferences = app.changeGrepPreferences = null;
app.findGrepPreferences = app.changeGrepPreferences = null;
app.findGrepPreferences.findWhat = "\\<K";
app.changeGrepPreferences.changeTo = "k";
app.changeGrepPreferences.underline = true;
app.selection[0].changeGrep();
app.findGrepPreferences = app.changeGrepPreferences = null;
app.findGrepPreferences = app.changeGrepPreferences = null;
app.findGrepPreferences.findWhat = "\\<L";
app.changeGrepPreferences.changeTo = "l";
app.changeGrepPreferences.underline = true;
app.selection[0].changeGrep();
app.findGrepPreferences = app.changeGrepPreferences = null;
app.findGrepPreferences = app.changeGrepPreferences = null;
app.findGrepPreferences.findWhat = "\\<M";
app.changeGrepPreferences.changeTo = "m";
app.changeGrepPreferences.underline = true;
app.selection[0].changeGrep();
app.findGrepPreferences = app.changeGrepPreferences = null;
app.findGrepPreferences = app.changeGrepPreferences = null;
app.findGrepPreferences.findWhat = "\\<N";
app.changeGrepPreferences.changeTo = "n";
app.changeGrepPreferences.underline = true;
app.selection[0].changeGrep();
app.findGrepPreferences = app.changeGrepPreferences = null;
app.findGrepPreferences = app.changeGrepPreferences = null;
app.findGrepPreferences.findWhat = "\\<O";
app.changeGrepPreferences.changeTo = "o";
app.changeGrepPreferences.underline = true;
app.selection[0].changeGrep();
app.findGrepPreferences = app.changeGrepPreferences = null;
app.findGrepPreferences = app.changeGrepPreferences = null; -
How do you set up Port Forwarding for ARD 2.2 in AEB N?
Help,
I'm a novice at Apple Remote Desktop (ARD) - not an IT guy, so it has to be pretty basic and detailed.
How do you set up Port Forwarding for ARD 2.2 on the Apple Airport Extreme BS router, 802.11 N. I have one at each end of the internet connection. At one end I have an Airport Extreme N router with 2 macs and eventually 1 windows XP machine (if I can) that I would like to be able to connect to over the interenet (the clients) and at the other end, I have a Mac with ARD 2.2 installed also with an Airport Extreme N router. Note: Both routers use Static IP addresses and all computers use static IP's internally not through DHCP. What are the settings or directions to do this.
I have read and printed out the directions for Configuration of ARD 3.0 that are posted many times in the ARD discusion group, but it uses a Linksys router ( http://www.starkpr.com/ard.htm posted by Dave Sawyer). The Mac router is different, particularly with the place to set a Private IP address. I'm not sure about alot of things, but especially about the Private IP address, what number do I set it to, the one that is in my Network connections list? It automatically changes to a different number in AE N setup for Port Forwarding (by one) as if it is not suppose to the same?????
Are there any directions available that are as straight forward for the Airport Extreme N router, as the one's that are listed here for the Linksys Router's? ( http://www.starkpr.com/ard.htm )
Any and All help will be greatly appreciated.
P.S. I know I should have 3.0 but bought 2.2 just weeks before 3.0 came out and they would not give me an upgrade price, so I'm waiting for 4.0 to upgrade.
Thanks,
JimTry the following for each AirPort Extreme ...
AEBSn - Port Mapping Setup
To setup port mapping on an 802.11n AirPort Extreme Base Station (AEBSn), either connect to the AEBSn's wireless network or temporarily connect directly, using an Ethernet cable, to one of the LAN port of the AEBSn, and then use the AirPort Utility, in Manual Setup, to make these settings:
1. Reserve a DHCP-provided IP address for the host device.
Internet > DHCP tab
o On the DHCP tab, click the "+" (Add) button to enter DHCP Reservations.
o Description: <enter the desired description of the host device>
o Reserve address by: MAC Address
o Click Continue.
o MAC Address: <enter the MAC (what Apple calls Ethernet ID if you are using wired or AirPort ID if wireless) hardware address of the host computer>
o IPv4 Address: <enter the desired IP address>
o Click Done.
2. Setup Port Mapping on the AEBSn.
Advanced > Port Mapping tab
o Click the "+" (Add) button
o Service: <choose the appropriate service from the Service pop-up menu>
o Public UDP Port(s): 3283
o Public TCP Port(s): 3283
o Private IP Address: <enter the IP address of the host server>
o Private UDP Port(s): 3283
o Private TCP Port(s): 3283
o Click "Continue"
o Click the "+" (Add) button
o Service: <choose the appropriate service from the Service pop-up menu>
o Public UDP Port(s):
o Public TCP Port(s): 5900
o Private IP Address: <enter the IP address of the host server>
o Private UDP Port(s):
o Private TCP Port(s): 5900
o Click "Continue"
o Click the "+" (Add) button
o Service: <choose the appropriate service from the Service pop-up menu>
o Public UDP Port(s):
o Public TCP Port(s): 5988
o Private IP Address: <enter the IP address of the host server>
o Private UDP Port(s):
o Private TCP Port(s): 5988
o Click "Continue"
(ref: "Well Known" TCP and UDP ports used by Apple software products) -
How can i set the alternating colors for a table rows
Dear All,
Please any one help me how can i set the Alternating colors for Table Rows.
i created a theam there i set the background alternating color to brown and i set the table design properity to alternating. but it is not reflecting.Hi,
The design property in Table properties should work for your requirement. Select "alternating" value for design.
Please see the API below:
design
Determines the appearance of the table. The property design can take the following values and is represented by enumeration type WDTableDesign.
alternating - The table rows are displayed alternately in a different color.
standard - The table background has one color. The individual table rows are displayed with grid net lines.
transparent - The table background is transparent. The individual table rows are displayed without grid net lines.
Check whether you have changed the right property or not? Also table should contain more than one rows to test this scenario.
Regards,
Jaya.
Edited by: VJR on Jun 17, 2009 6:43 PM -
How can I set up my Mac for two users to share photos, music etc
How can I set up my Mac for two users to share photos, music etc?
On the Mac with the libraries you want to share:
iTunes Preferences click on the Sharing tab and put a tick in 'Share by library on local network'.
iPhoto Preferences click on Sharing and put a tick against 'Share my photos'.
When launching the same apps on other Macs on the network the libraries should be available, listed on the left. -
How do I set the aspect ration for 4:3 or for 16:9?
How do I set the aspect ration for 4:3 or for 16:9 in Adobe PE12?
PulcinellaNM
What computer operating system is your Premiere Elements 12 running on? Have you updated from 12 to 12.1 Update via a project's Help Menu/Update? If not, please do so. That is all background information for now.
As for the question that you are posting....
I think we need to go a lot deeper into what you are doing. Here are some considerations
The aspect ratio setting is in the import settings. In Premiere Elements 12 Expert workspace, the project automatically sets the project preset based on the properties of the first video file that you drag to the Expert workspace Timeline. If your video's properties include a 16:9 flag, then the project settings will have a 16:9 flag (aspect ratio). If you do not want the project to set the project settings automatically, you can set the project settings yourself manually with File Menu/New/Project and then import your source video.
If a problem exists where imported 16:9 video is presenting in Premiere Elements as 4:3 instead of 16:9 (typical of the JVC .mod file issue), then you can set the pixel aspect ratio under Interpret Footage feature inside the project workspace.
At this point, I think it best for you to give more details and background behind your question so that we can be sure that we are giving you the information that you need to succeed in your projects.
If you need clarification on anything written, please do not hesitate to ask for clarification.
Thank you.
ATR -
How can I set up anApple ID for my 9 years old. Every time I try it tells me he is bolew the min age. If this is the case how can he download free games and how can he redeem his birthday $30 iTunes card? I dont want him to use my ID as it has my credit card details.
I'm very fustrated with this as it seems the Apple kit is for 13 years and older only.
Cheers
BradThat's great your 9-yr-old is responsible enough to handle an iTouch!
There's no way around the age limit. I suggest a family account that you, an adult, control. -
How do you set the font color for a specific entire row inside a JTable?
How do you set the font color for a specific entire row inside a JTable?
I want to change the font color for only a couple of rows inside a JTable.
I've seen some ways to possibly do this with an individual cell.
Clarification on changing the font color in an individual cell would be helpful too if
there is no easy way to do this for a row.hai,
Try out with this piece of code.Create your table and assign the renderer to each column in the table.
CellColorRenderer m_CellColorRenderer = new CellColorRenderer();
for(int i=0;i<your_JTable.getColumnCount();i++)
your_JTable.getColumnModel().getColumn(i).setCellRenderer(m_CellColorRenderer);
class CellColorRenderer extends JLabel implements TableCellRenderer
CellColorRenderer()
setOpaque(true);
setHorizontalAlignment(LEFT);
setVerticalAlignment(CENTER);
setBackground(Color.white);
setForeground(Color.black);
protected void setValue(Object value)
setText((value == null) ? "" : value.toString());
public Component getTableCellRendererComponent(JTable table,Object value,boolean isSelected, boolean hasFocus, int row,int column)
if(isSelected == true)
setForeground(Color.red);
else
setForeground(Color.black);
setValue(value);
return this;
regards,
bala
Maybe you are looking for
-
Just purchased a new ipad 2 and when I go into settings I don't have an icloud icon anywhere. Where is it? Please help me !!!
-
Hello my name is Amirel and this is my 1st time on the forum could any one advice me in regards to optimizing my logic pro on a macbook pro? I interface audio via motu traveler. Thanks
-
How do I get my Blackberry to Sync with Outlook and other apps on Mavericks?
With the removal of iSync, how do I get my Blackberry to sync with Microsoft Outlook 2011, and the other applications on Mac?
-
I wish to open and then convert a pdf or eps or ps file in Labview , and then convert to say TIFF so i can manipulate it in my application. Are there any vi's or methods whereby I can open and work with PDF files from Labview ? I have the IMAQ vision
-
Where does one find the WPA-key for their airport express?
I'm trying to have a Playstation 3 access my airport express network. It sees the network but when I get to the security settings (which is WPA-2) it asks for my WPA key. I don't know where to find that. I went into my computer's keychain utility