How do i set dpi for picture printing in photoshop elements 4

how do i set dpi for pictures to print using photoshop elements 4 . . . thank you. i do not mean resolution but the dpi asnd if i can't then what version would be able to do it . . .

You can set that under Image>Resize>Image Size and uncheck Resample Image and enter the Resolution
http://planetphotoshop.com/explaining-image-resolution-and-view-print-size.html
http://graphicssoft.about.com/od/photoshop/l/bllps502x6.htm

Similar Messages

How do I change platform for downloading and installing Photoshop Elements from Windows to Mac?

How do I change platform for downloading and installing Photoshop Elements from Windows to Mac?

As long as your license supports both platforms you should only have to download the Mac version and install/activate using your serial number. If you need help finding a link to download the file, please indicate the PSE version you need.

How can I set DPI for a document in illustrator?

I'm designing a user interface for iPad (Resolution: 1024x768, DPI:132). Setting the resolution is a piece of cake but when I change the ruler unit to Centimeters, it shows the screen about 36x27cm which is not right (iPad screen is 24.3x19cm).
Illustrator calculates these lengths based on the DPI. But when creating a new document the only available DPI's are: 72, 150, 300 (File > New > Raster Effect). I searched for the answer on this forum and googled it and looked into the help but couldn't find a satisfying answer. I know that Illustrator is a vector design program but there must be a way to set the DPI to an arbitrary value.
How can I have a 1024x768px artboard in Illustrator that is 24.3x19cm? (DPI=132)

Alex,
only when I'm printing or saving the image for the web, Illustrator will ask me the actual width.
Almost. Illustrator won't "ask you for the width." As with any program, when you export a vector graphic to a raster image, you have the opportunity to specify its resolution, in number of pixels. Illustrator tries to "simplify" (and thereby often confuses) this process by providing different interfaces for the same thing. The so-called "Save For Web" interface is just another way to export a raster image (and other web-centric things, like slicing). The settings available (or at least the ones most prominate) differ between the straightforward Export dialog and the Save For Web dialog.
My question is: how illustrator calculates these measures?
Again: When Illustrator's rulers are set to "Pixels," they are really set to points. A point measures 1/72 inch. So Illustrator assumes a "pixel" is scaled to measure 1/72 inch, even though it may not be in a particular raster image object you have on the page.
But when you export as a raster image (in other words, rasterize the artwork), you don't care what those pixels are scaled to due to the actual, physical, hardware dimensions of the device's monitor pixels (so-many centimeters by so-many centimeters). Regardless of whether the device's hardware pixels are gigantic or microscopic, you just care how many of them there are. So long as you export your finished artwork rasterized to that number of pixels, it will effectively be scaled (in terms of actual measure) by whatever device it is displayed on, becasue the device is going to "turn on" a monitor pixel for each pixel in your image.
In other words, when designing purely for electronic displays (as opposed to printing), forget all about PPI, or DPI, which are nothing but scale factors, and forget about the actual measure (centimeters x centimeters, inches by inches) of the monitor.
If I display your 1024 x 768 image in a web browser on my 15-inch-diagonal Toshiba laptop, your image is going to occupy 1024 x 768 of my monitor's pixels.
If I display your 1024 x 768 image in a web browser on my 10-inch-diagonal Acer netbook, your image is going to occupy 1024 x 768 of my monitor's pixels, and it will display at a smaller actual size than it does on my Toshiba, because the Acer's monitor pixels are smaller than the Toshiba's monitor pixels.
But even though the image's actual measure is smaller on the Acer, and even though your image occupies the exact same number of monitor pixels on both the Acer and the Toshiba, I will have to do some scrolling on the Acer because its monitor has fewer hardware pixels.
So if I'm designing images to fit neatly on my Acer without the need for scrolling, I care about its screen size in terms of number of hardware pixels, not in terms of actual measure (centimeters or inches).
I want to be able to set the lines and curves in terms of pixels.
Because Illustrator considers a pixel to be a particular measure (1/72 inch), work with your rulers set to either the bogus PIxels or to Points (which, in Illustrator, is the same thing). Forget about the dimensions of a device screen. It doesn't matter.
If you want to also spec type in terms of "pixels" you can also (pointlessly) set your General Prefs to use the bogus Pixles as the "Unit Of Measure". But this is pointless because in Illustrator, a so-called "Pixel" is, in fact a point already, and Points is the default UOM for type. Either way, you have to realize that any measure for type (using "Pixels" or Points) is a measure of the font's em-square, not the measure of the actual glyphs. So setting your type to "9 Pixels" doesn't mean the type characters are going to occupy 9 pixels in height.
But you can proceed to specify line weights, box sizes, etc., etc, in terms of ruler units (bogus pixels or legitimate points).
Alternatively, if you want, you can set your rulers to Centimeters. And then as you draw your boxes and set your stroke weights, you can specify them in terms of Points or "Pixels" by just typing "pts" or "px" after the measures you key into the various dimension fields.
But after all this is said and done, the point you're missing is still this: All that means nothing if you don't export the resulting images to the number of pixels that you want them to occupy on the device you are designing for. In other words, you can work with your Illustrator rulers set to "Pixels" all day long; but if you then export the artwork to a raster format using a Pixels-Per-Inch setting other than 72, It won't be the right size, because Illustrator still thinks a Pixel measures one point.
So regardless of how you have your rulers set while working, it is just simpler (and more legitimately meaningful) to export your raster images in terms of number of pixels (N pixels x n pixels), not by PPI. That brings us full-circle right back to where your question started: There is no document-wide PPI for an Illustrator file.
But what you have to understand is this: If your design includes already-rasterized objects, the number of actual pixels included in each of those raster objects is entirely independent of whatever Illustrator's rulers say they "measure" in "Pixels". That is very important. Because if you use as part of your design a raster image that is scaled to anything other than 72 ppi, and/or that image does not align to a point-size increment of Illustrator's grid, then when you export your final product, that image is going to be re-rasterized to whatever PPI you export, based on its on-page position and the quality of that image is going to be compromized. That's why it's important to understand that "Pixels" is bogus as a unit of measure in a program like Illustrator.
In pursuit of web- and device-centric creative markets, Adobe continues to add confusion-generating "conveniences" to Illustrator. For example, to workaround Illustrator's problematic antialiasing, version CS5 added a feature called Align To Pixel Grd which causes vertical and horizontal strokes to align to whole-"pixel" increments, to avoid antialiasing of those edges.
There are also probably templates in your AI installation (depending on version) already set up for mobile devices, and there's the whole "Device Central" online thing, if you're inclined to use that kind of thing. So look up and read about those features.
JET

How do I set up for Wireless printing on a Mac

Hi Guys,
I have purchased the HP Laser jet P1102w recently. I took the printer on a location job and used it for the first time. It was quite a soimple process of connecting the printer and MAC automatically downloaded and installed the software.
As we were out of the office, we were not connected to the wireless network and therefore was not able to set up the printer on the netwrok.
Now that we are back in the office I want to set up the printer so that it can be used wirelessly by all the devices connected to the network.
I am unable to work out how to do this on MAC OS X 10.6.8. I removed the printer from the Print & Scan Utility and tried to install it again while connected to the network, however I am still only able to print while connected by USB.
I understand that I can print via the connected device on the network but would rather have it set up to do so wireless all together.
Please can you point me in the direction of finding the instructions to set this up?
All help is most appreciated.
This question was solved.
View Solution.

Hi @EI2014 ,
Make sure Safari is set as the default browser. Sometimes the Embedded Web Server won't open in other browsers.
Open Safari, across the top select the Safari menu, select Preferences, General, set as default.
Clear out any old network settings on the printer.
Turn the printer off, hold down the wireless button and cancel (x button) while turning the printer back on and don't release the two buttons until the printer stops making noise.
Print out a configuration report and make sure the SSID and IP address are cleared.
Printing a Configuration Page.
Connect the USB cable from the printer to the Mac.
Go to the Apple, system preferences, print and fax.
Double click on the P1102w.
Open the utility.
Click printer setup.
Click HTML config.
This should open the Embedded Web Server for the printer.
Click the Networking tab.
Click Wireless from the list on the left.
Under Communication Mode , click Infrastructure.
Select your network SSID from the Available Network Names (SSID) list and then click the << button so the network name moves over to other box.
From the Security Mode pop-up menu under Authentication , click WEP, WPA/WPA2 or open . Your selection depends on which Wireless Security Protocol your network uses.
Make sure you select either hexadecimal or alpha depending on your password. (very important)
Apply the settings.
In the confirmation box (changes have been saved), click OK.
You should get a solid blue light on the printer shortly.
Then all we have to do is delete the USB driver and add the network driver.
Click on the Apple.
Click system preferences.
Click the print and fax icon.
Highlight the printer and click on the - sign to delete the printer. (USB driver)
Disconnect the USB cable.
Then click the + sign and select the printer from the list and click add. (p1102w bonjour)
Test the printer.
If you have any issues with the HTML config opening then do the following steps:
Close any applications.
On the Apple menu bar, click Go, computer, MAC harddrive, Library, Printers, HP, LaserJet, click on folder for your printer, click on EWS browser or HTML config, click the Networking tab, click wireless on the left and fill out your information. (make sure infrastructure is selected) Apply settings.
Then delete the USB driver and add the network printer.
Test the printer.
If you need further assistance, just let me know.
Have a nice day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Color Management for Epson printer using Photoshop Elements 6

I have consistently dark prints when using my new Epson workhorse 1100. It prints fine from iPhoto but not from Photoshop Elements 6. The Epson people say it's an Adobe problem. The Adobe people won't help, as it's not under warranty. I am interested in settings in PSE6 or on my Mac OSX. Or, what's a profile and how do I set it? Thanks!!

Yes, I've tried all of the options: Printer manages color, PSE manages color. All are the same dark prints.
On another conversation on this forum, I read the following. Very discouraging to think that Adobe knows of this problem but won't give me any tech support because too much time has lapsed.
I don't know what "plugs" are--sounds like this user figured out a way around it.
Any advice?
Thanks!
Fran
Re: Color mismatch EpsonR800 and Elements 6
Adobe has admitted that there is a color management issue with PSE 6 for Mac. I have an Epson R1900 and I am now getting acceptable color-managed prints by allowing the Epson Printer driver to manage color management (ie; color management in PSE 6 turned off). The Epson Photoshop Plug In also works well with PSE6 and ICC profiles; however, I have yet to solve 2 problems with this particular plug in: (1) How to get the program to capture 3rd party ICC profiles and (2) how to print borderless prints. If anyone has seen a user guide for this particular plug in, I would be grateful to know how to download it.

How do I set up automatic duplex printing for my HP Laserjet Pro400 M401n series?

How do I set up automatic duplex printing for my HP Laserjet Pro400 M401n series from my PC using windows 8?

Thanks for your reply.
Looks like I didn't do enough research as the HP site said it's available however upon further investigation only manual duplexing is available with drivers installed.
http://www8.hp.com/ca/en/products/printers/product-detail.html?oid=5166605
Drive productivity and save paper, using automatic two-sided printing

Halftones and dpi for screen printing

I am creating a halftone effect on a black and white picture for screen printing, using photoshop. I know about where to place my LPI, however, Im not sure where I should put my DPI. If anyone can help with some advice, I would appreciate it. I was also curious if i should some how put it illustrator, and vectorize it, or just print transparencies straight from photoshop.
Thanks

There's no need to go to Illustrator with the photo. You can print from Photoshop using the 1-bit halftone. The thing that you have to keep in mind is not so much DPI ( which is an output resolution ), but the actual screen mesh used for the actual screen printing. You also have to figure "screen angles" into the matrix because the screen angles are affected by not only the grament material, but the screen mesh, too. So, I would recommend contacting the printer and finding out what screen frequency ( LPi / lines per inch ) will work best on the type of garment you are planning to print-on and ask the printer what mesh they plan to use for your job. I've seen 35 LPi halftones; I've also seen 65 LPi halftones. The finer the screen mesh, the higher the LPi. Tell the printer you have a 2-color job printing halftones and you need to know what LPi and what angles to use for color #1, and color #2. Then, you can input that information into the separation halftone files in Photoshop. Remember to discuss the garment type ( thread count ) and the mesh of the screen. If the printer is good and knows what they are doing, they will give you everything you need to know. If they do not, they'll refuse the job.

How do I set up my Epson printer to print wirelessly from my Mac Pro

How do I set up my Epson printer to print wirelessly from my Mac

Hello:
You need to go to Epson for specifics (is your printer set up for Airprint, etc).
Barry

How do I set up a network printer an an in-OS driver in Windows 7 32 bit?

How do I set up a network printer an an in-OS driver in Windows 7 32 bit?

What printer? What router?
Get the latest software for your printer from the "Support & Drivers" link at the top of this page.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

How can I set up a preferred printer so I don't have to pick the printer each and every time I print something out? At the moment, even immediately after printing one thing, it prompts me to pick a printer, which is very time consuming.

How can I set up a preferred printer so I don't have to pick the printer each and every time I print something out? At the moment, even immediately after printing one thing, it prompts me to pick a printer, which is very time consuming.

Compass Health Systems wrote:
How can I set up a preferred printer so I don't have to pick the printer each and every time I print something out? At the moment, even immediately after printing one thing, it prompts me to pick a printer, which is very time consuming.
No, there is not setting for a default printer.The system scans for available airprint printers each time you print.

How do I set up my dx7400 printer to iPhone 4s as I have no pc or lap top?

How do I set up my dx7400 printer to iPhone 4s as I have no pc or lap top?

You don't.
According to Epson ( http://www.epson.com/cgi-bin/Store/support/supAdvice.jsp?BV_UseBVCookie=yes&type =highlights&noteoid=196563#epson_connect_compatibility ) That printer does not support AirPrint.

How can i set dynamice for week on Selection screen..pls help me..Urgent

Hi..All
please Help me .. i am very confused..
i need to set a varient for week which is dynamic on selection screen.
b) Week from current week to current week + 2. (<b>Dynamic selection)</b>how can i set dynamice for week on Selection screen,,
how can i do this..i am alrady set dynamice variant for Date.. there is option for D.. but in case of week there is a no option.
pls help me..urgent
thamks in advance.
mayukh

Hi,
I think the way out is use the dynamic select option while setting up the varinat and use sy-datum to sy-datum+9 which should essentially serve the purpose.
While saving the variant, for that particular date field check the Selection variable checkbox, then Choose D
option and then choose current days + or - option from there.
Rgds,
HR

HT201304 How do I set password for all in app purchases?

How do I set password for all in app purchases? xx

In-App purchases cannot be made without entering your iTunes store account password.

How can i set password for a backup?

::I am using 10g xe
I am gettin gbackup through RMAN, how can i set password for each backup? I want to protect my backup so that no one other could use it if he copies the backup files.
Faheem

Just use "SET ENCRYPTION ON IDENTIFIED BY password ONLY" command in your RMAN scripts. Look at the advanced backup manual for details: http://download-east.oracle.com/docs/cd/B19306_01/backup.102/b14191/rcmbackp006.htm#sthref632
Daniel

How do i set password for one folder ?

my mobile is nokia e51 , how do i set password for my personal folder ?
Message Edited by shajeer on 25-Jun-2008 08:21 PM

how do i use Advanced Device Locks to password-protect the gallery, or individual applications. ? thank u ...
Message Edited by shajeer on 26-Jun-2008 08:00 AM

How do i set dpi for picture printing in photoshop elements 4

Similar Messages

Maybe you are looking for