How do I set ical default values in lion?

I have just upgraded to Lion and so far, so good. In the new iCal, how do I set the default values? In the old version, when you clicked on the calendar, the default value was a 1 hour meeting around the current time of day. The new version defaults to an all-day meeting. I like the old way better, or best would be to have it as a preference.
Is there a way to set this that I'm not seeing?

Mike,
It sounds to me like you are using the "Month" view for that entry.
Default event creation in Month view results in an all day event.
Lion iCal Help (Add events to a calendar) says: "Add a new event in Month view by double-clicking within the day you want the event to appear. Enter a name and time duration for the event in the event’s title field, and then press Return."
Try entering "Meeting at 9am"...that will create a one hour event named Meeting.

Similar Messages

How do I set the default value to 0 in a property with "money" as the type?

I have an entity with several properties with the "Money" data type. I also have a Money property with a "computed" value that shows the sum of the other money type properties. However, a total will not display if any of the other
fields are left with a null value. Is there way to make the default value set to "0"? I am using c#. Thank you.

Mark, there's a very basic .NET method on every nullable object:
GetValueOrDefault
EDIT: Now I see...please avoid duplicating
questions...
To be clear:
Put GetValueOrDefault on every nullable field used inside your 'TotalDue_Compute' sub
You don't need to define 'TotalDue' as Nullable anymore

How do I set the default value in a PPD. (xerox accounting)

I'm trying to modify a PPD for a xerox machine to set an accounting id into the default printing.
I found the following in the PPD
*XRFeature XRAccountingUserID: "string 0 20 Accounting"
*XRFeature XRAccountingAccountID: "string 0 20 Accounting"
*OpenUI *XRAccountingSystem/Accounting System: PickOne
*OrderDependency: 10 AnySetup *XRAccountingSystem
*DefaultXRAccountingSystem: PickOne
*XRAccountingSystem None/None: ""
*XRAccountingSystem XSA/Xerox Standard Accounting or Auditron: ""
*XRAccountingSystem XNA/Xerox Network Accounting: ""
*CloseUI: *XRAccountingSystem
*OpenUI *XRAccountingPrompt/Accounting Prompt: PickOne
*OrderDependency: 10 AnySetup *XRAccountingPrompt
*DefaultXRAccountingPrompt: Prompt
*XRAccountingPrompt Prompt/Always Prompt: ""
*XRAccountingPrompt DoNotPrompt/Do Not Prompt: ""
*XRAccountingPrompt PromptFax/Only Prompt for Fax: ""
*XRAccountingPrompt PromptColor/Only Prompt for Color: ""
*XRAccountingPrompt PromptColorFax/Only Prompt For Color and Fax: ""
*CloseUI: *XRAccountingPrompt
*OpenUI *XRAccountingAccountType/XRAccountingAccountType: PickOne
*OrderDependency: 10 AnySetup *XRAccountingAccountType
*DefaultXRAccountingAccountType: Default
*XRAccountingAccountType Default/Default Group Account: ""
*XRAccountingAccountType General/General Account: ""
*XRAccountingAccountType Group/Group Account: ""
*CloseUI: *XRAccountingAccountType
*OpenUI *XRAccountingMaskUserID/XRAccountingMaskUserID: PickOne
*OrderDependency: 10 AnySetup *XRAccountingMaskUserID
*DefaultXRAccountingMaskUserID: True
*XRAccountingMaskUserID False/Disabled: ""
*XRAccountingMaskUserID True/Enabled: ""
*CloseUI: *XRAccountingMaskUserID
*OpenUI *XRAccountingMaskAccountID/XRAccountingMaskAccountID: PickOne
*OrderDependency: 10 AnySetup *XRAccountingMaskAccountID
*DefaultXRAccountingMaskAccountID: True
*XRAccountingMaskAccountID False/Disabled: ""
*XRAccountingMaskAccountID True/Enabled: ""
*CloseUI: *XRAccountingMaskAccountID
*OpenUI *XRAccountingAuxInterface/XRAccountingAuxInterface: PickOne
*OrderDependency: 10 AnySetup *XRAccountingAuxInterface
*DefaultXRAccountingAuxInterface: False
*XRAccountingAuxInterface False/Disabled: ""
*XRAccountingAuxInterface True/Enabled: ""
*CloseUI: *XRAccountingAuxInterface
*OpenUI *XRAccountingAuxEnterAtDevice/XRAccountingAuxEnterAtDevice: PickOne
*OrderDependency: 10 AnySetup *XRAccountingAuxEnterAtDevice
*DefaultXRAccountingAuxEnterAtDevice: True
*XRAccountingAuxEnterAtDevice False/Disabled: ""
*XRAccountingAuxEnterAtDevice True/Enabled: ""
*CloseUI: *XRAccountingAuxEnterAtDevice
I've figured out I can change
"*DefaultXRAccountingSystem: PickOne" to "*DefaultXRAccountingSystem: XSA"
enabling accounting.
then I change
"*DefaultXRAccountingPrompt: Prompt" to "*DefaultXRAccountingPrompt: DoNotPrompt"
so I'm not prompted to enter the accounting code on print
what I haven't figure out is how to set the value of the accounting user id.
I suspect that
*XRFeature XRAccountingUserID: "string 0 20 Accounting"
is declaring the accounting user id, and might be a place to set the accounting ID. But i'm not sure how to set it.
or maybe it should be set at
*XRAccountingSystem XSA/Xerox Standard Accounting or Auditron: "" ?
any suggestions? ideas?

Hi TeenTitan
I may have a problem simular to yours with a KM bizhub C451 with accounting turned on from Mac OX 10.6 + 10.7 + 10.8 machines.
On some machines we can go into printer settings just to check that all user/password settings are ok (without changing anything) and then we can print one job. It looks like the system forgets the user name and password unless we go into printer settings each time we want to print.
I was thinking of putting in the user/password in the PPD just like you.
I was wondering if you ever found a solution ?
Link https://discussions.apple.com/message/20371136?ac_cid=tw123456#20371136?ac_cid=t w123456

How do I set iCal default alterts

Is it possible to set alerts so they default to none in iCal?

Mike,
It sounds to me like you are using the "Month" view for that entry.
Default event creation in Month view results in an all day event.
Lion iCal Help (Add events to a calendar) says: "Add a new event in Month view by double-clicking within the day you want the event to appear. Enter a name and time duration for the event in the event’s title field, and then press Return."
Try entering "Meeting at 9am"...that will create a one hour event named Meeting.

How to set a default value in a dropdownlistbox

Hi,
In CRM 2007 WEBUII have created a dropdownlistbox (ddlb) filled with currency codes.
Now I want the default value of the ddlb to be the currency of the country of the loggedin user, ie : 'EUR'
Anyone an creative idea how I can achieve this ?
In first place I need to know how I can set a default value of a ddlb.
--> ddlb type ref to CL_CRM_UIU_DDLB.
regards,
Abjuh

Hello Wolfgang,
If the method does not exist yet, you can create it in your enhanced (Z) context node.
Definition:
ATTRIBUTE_PATH Importing Type STRING
ITERATOR Importing Type Ref To IF_BOL_BO_COL_ITERATOR
VALUE Returning Type STRING
Implementation:
method GET_BP_GROUP.
 DATA: current TYPE REF TO if_bol_bo_property_access.
 DATA: dref TYPE REF TO data.
 if iterator is bound.
 current = iterator->get_current( ).
 else.
 current = collection_wrapper->get_current( ).
 endif.
TRY.
 TRY.
 dref = current->get_property( 'BP_GROUP' ). "#EC NOTEXT
 CATCH cx_crm_cic_parameter_error.
 ENDTRY.
 CATCH cx_sy_ref_is_initial cx_sy_move_cast_error
 cx_crm_genil_model_error.
 RETURN.
ENDTRY.
 IF dref IS NOT BOUND.
 value =''
 RETURN.
 ENDIF.
 TRY.
 value = if_bsp_model_util~convert_to_string( data_ref = dref
 attribute_path = attribute_path ).
 CATCH cx_bsp_conv_illegal_ref.
 FIELD-SYMBOLS: <l_data> type DATA.
 assign dref->* to <l_data>.
* please implement here some BO specific handler coding
* conversion of currency/quantity field failed caused by missing
* unit relation
* Coding sample:
* provide currency, decimals, and reference type
* value = cl_bsp_utility=>make_string(
* value = <l_data>
* reference_value = c_currency
* num_decimals = decimals
* reference_type = reference_type
 CONCATENATE <l_data> '-CURR/QUANT CONV FAILED-' INTO value
 SEPARATED BY space. "#EC NOTEXT
 CATCH cx_root.
 value = '-CONVERSION FAILED-'. "#EC NOTEXT
 ENDTRY.
 if value is initial.
 value = 'Your default value'.
 endif.
endmethod.
Regards,
Fabian

How to set a default value in a DateTime field?

Hi!, how do you set a default value in a DateTime field in a user table to the value of "today"?
Thank you!

It's in SAP Business One 2007, in User-Defined-Fields, under User Tables, Iam trying to add a field to a Table I created in the User-Defined-Tables-Setup menu.
I click Add then type the field name, description and then I select the Type, which is DateTime, then the SelectDefault Value For Field get's grayed out.
Thank you!

How do I set the default text in a bound textbox?

How do I set the default value of a bound textbox when the AddNewItem button on the MenuStrip is clicked?
I have the following code (see below), but for some reason it does work when I put the code in the
AddNewItem_Click event; however, it does work if I put it in the
Form's Load Event. The statement in question is Me.txtBusUsagePct.Text = 100.
What am I doing wrong? Why can't I set the default text in the AddNewItem_Click
event?
Private Sub BindingNavigatorAddNewItem_Click(sender As Object, e As EventArgs) Handles BindingNavigatorAddNewItem.Click
Me.txtBusUsagePct.Text = "100"
End Sub
BobV365

Hello,
Here I am using mocked up data but the important thing is after loading the data. Requires on the form a BindingNavigator and two text boxes.
Public Class Form1
WithEvents bsData As New BindingSource
Private Sub Form1_Load(
ByVal sender As System.Object,
ByVal e As System.EventArgs) Handles MyBase.Load
Using MockedData As New DataTable()
MockedData.Columns.AddRange(New DataColumn() _
New DataColumn("PartName", GetType(String)),
New DataColumn("partqty", GetType(Int32))
MockedData.Rows.Add(New Object() {"Part A", 100})
MockedData.Rows.Add(New Object() {"Part 99", 34})
MockedData.Rows.Add(New Object() {"Part B", 4})
bsData.DataSource = MockedData
End Using
CType(bsData.DataSource, DataTable).AcceptChanges()
BindingNavigator1.BindingSource = bsData
TextBox1.DataBindings.Add("Text", bsData, "Partname")
TextBox2.DataBindings.Add("Text", bsData, "partqty")
End Sub
Private Sub bsData_AddingNew(
ByVal sender As Object,
ByVal e As System.ComponentModel.AddingNewEventArgs) _
Handles bsData.AddingNew
Dim dv As DataView = TryCast(bsData.List, DataView)
Dim rv As DataRowView = dv.AddNew()
rv("PartName") = "(new)"
rv("partqty") = 0
e.NewObject = rv
bsData.MoveLast()
End Sub
End Class
Please remember to mark the replies as answers if they help and unmark them if they provide no help, this will help others who are looking for solutions to the same or similar problem. Contact via my webpage under my profile
but do not reply to forum questions.

SRM 4.0- How to set the default values for product type (01) only for SC

The radio button Service should not be visible.
Also for search help (e.g. search for internal products) where a search should only be possible for product type 01 (goods). The system should not display the product type and internally always search for goods only.
How to set the default values for product type (01) only for SC
We needs to use Search help BBPH_PRODUCT which having parameter PRODUCT_TYPE
Here we can set defalut value 01 but it is not correct one since same search help is using several places.
We need to limit the search help results only for SC.
Kindly help out me ASAP.

The easiest way to set defautl values is to edit the batch class.
Goto the characteiristic and go to update values.
In here you probably have something like 0 - 100 as a spec range.
On the next line enter the default value within this range. At the end of the line, click in the box in the column labelled "D". This indicates the defautl value for the characteristic.
If you need to you can do this in the material classification view as well.
Just to be clear, these values will only show up in the batch record. You can not have defautl values in resutls recording screens.
FF

How to set a default value in my DropDown using the key ?

Hello All,
Can someone advose how I can achieve the above ? I will like to know how to select a default value for the dropdown by key using the key value instead of description.
The reason why I need to do so instead o fusing description is because my application will populate the dropdown using web services based on the language selection. Hence, if I were to set the default value using description, den other languages will not work anymore.
Any help will be greatly appreciated. Thank you !!
from
KWok Wei

Kwok,
Assuming that:
1. You have a node NodeX, where attribute TargetAttr defined
2. You have a DropDownByKey UI control, its property selectedKey bound to NodeX.TargetAttr attribute
Then:
Place in your code:
wdContext.currentNodeXElement().setTargetAttr("yourKey");
VS
P.S. This topic was raised several times, and forum search works good enough to find an answer

How to set a default value in dropdown list in Wendynpro ABAP? Help!

Hi Experts,
 I have Webdynpro for ABAP application that shows a DropdownwithKey UI element.
1. I am able to populate the dropdown list. But by default the list is not showing any value. Only when I select a value from the list then it shows it.
So how to set the default value to the first value in the list? Any code sample will be really helpfull.
I have written the following code:
method WDDOINIT .
DATA:
 node_category TYPE REF TO if_wd_context_node_info.
node_category = WD_CONTEXT->GET_NODE_INFO( ).
node_category = node_category->GET_CHILD_NODE( 'CATEGORY' ).
data: LT_VALUESET type WDR_CONTEXT_ATTR_VALUE_LIST,
 L_VALUE type WDR_CONTEXT_ATTR_VALUE.
L_VALUE-VALUE = 'V1'.
L_VALUE-TEXT = 'yesterday'.
INSERT L_VALUE into table LT_VALUESET.
L_VALUE-VALUE = 'V2'.
L_VALUE-TEXT = 'today'.
INSERT L_VALUE into table LT_VALUESET.
L_VALUE-VALUE = 'V3'.
L_VALUE-TEXT = 'tomorrow'.
INSERT L_VALUE into table LT_VALUESET.
node_category->SET_ATTRIBUTE_VALUE_SET(
 NAME = 'CAT_VALUE'
 VALUE_SET = LT_VALUESET ).
endmethod.
Note that: I am using webdynpro for ABAP.
Thanks
Gopal

I am not sure how it works in Web Dynpro for ABAP, but in Web Dynpro for Java to set default drop down value you will have to set the value for particular attribute (which is linked to the dropdown element) in the context
like
wdContext.currentContext<nodeName>Element.set<FieldName>(<defalut value>)
This generally done in Initialization method of the controller.

How to set a Default Value in the drop down on Account Creation ?

Hi,
i have to set a default value in the drop down as soon as a User in a particular business role clicks on New Account. I have written the following code in do_prepare_output method. But this code is executed in the 2nd server round trip after entering some value or pressing enter. so i am not getting as soon as user clicks on the New Account.
How to set that default value when user clicks on New Account ? and where should i code ?
IF lv_icwc_profile = 'ZCSALESPRO' or lv_icwc_profile = 'Z_SALESPRO' .
try.
              lr_entity ?= me->typed_context->header->collection_wrapper->get_current( ).
              lv_current = lr_entity->create_related_entity(
                                              iv_relation_name = 'BuilRolesRel' ).
                             lv_current->set_property(
                                iv_attr_name = 'PARTNERROLE'
                                iv_value     = 'BUP002' ).
               CATCH cx_sy_ref_is_initial cx_sy_move_cast_error
               cx_crm_genil_model_error.
               return.
        ENDTRY.
Thanks and Regards
Raman Khurana

Hi,
I have some idea abt it, it is also used in account life cycle.
Please refer SAP note 1097651, Defaulting a life cycle stage.
Let me know if useful.
rgds,
Vinay

How to set a Default Value in Combobox

Dear All,
I want to set a default value in a combobox when open the form. How can I set that?
Default value : It is one of the options of the combobox.

Im doing it as
If BusinessObjectInfo.FormTypeEx = "150" And BusinessObjectInfo.BeforeAction = False And BusinessObjectInfo.EventType = SAPbouiCOM.BoEventTypes.et_FORM_DATA_LOAD Then
            oForm = SBO_Application.Forms.GetFormByTypeAndCount(BusinessObjectInfo.FormTypeEx, 1)
            Dim vepcombo As SAPbouiCOM.ComboBox
            Dim vepitem As SAPbouiCOM.Item
            vepitem = oForm.Items.Item("24")
            If vepitem.Enabled = True Then
                 vepcombo = vepitem.Specific
                vepcombo.Select(10, SAPbouiCOM.BoSearchKey.psk_Index)
            End If
        End If

How to set a default value in Select one choice.

Hi
I'm using ADF BC, in that how to set a default value in select one choice.
pls. help on this.
regards

set the default value on the underlying EO or VO attribute
john

How to set a default value of " " for a VARCHAR2 in ER diagram?

Hi,
I am trying to set the default value of a VARCHAR2 attribute to " " (space) in an ER diagram. But it just thinks I don't want anything for the default value. If I specify CHR(32) will it work? or is there another way? Will I have to wait until I get into the server model to do this, if so how do I do it there?
thx
adam

Are you sure you want the default to be a space, not a NULL? VARCHAR2 fields want to trim spaces from the right, which makes them NULL if they started as all spaces. You can force them to accept spaces, but it is an unnatural condition. Even the VARCHAR2 columns that I use as surrogates for booleans I set as 'Y' for true and 'N' for false, or 'T' for true and 'F' for false. Occasionally, it will be 'X' for selected and NULL for not selected, but the NULLs tend to cause trouble so I avoid them.
Okay, let's assume that you have a good reason to default to a space. Use ' ', including the single quotes. When you transform to a Table Definition, change the Default Value Type for the column to a Database Function Call. You can't do that in the logical (Entity/Attribute) design, only in the physical (Table/Column). That will make sure that the Server generator will leave it the way you wrote it.

How to set a default value to a field in *_BrowEdit.jsp?

I know that we can use:
<jbo:AttributeIterate id="def" datasource="<%=dsName%>">
<jbo:RenderValue datasource="<%=dsName%>"/> 
</jbo:AttributeIterate>
to accept value .
And now ,I want to set a default value to a filed.
How to do?

Hi,
This functionality is known to be very important and is a key part of the next major release of the JRC planned for the first half of 2008.
Regards,
Blair Wheadon
Product Manager, Crystal Reports

How do I set ical default values in lion?

Similar Messages

Maybe you are looking for