How do i set it to boot from disc - lenevo G505s

basic question : How do i change the boot options to boot from my cd/dvd drive?
I cannot see this option in the BIOS settings.
All i see when i press enter on "Boot priority" is - 1)UEFI first 2)Legacy first
please help
Solved!
Go to Solution.

Hi pramit57,
Welcome to Lenovo Community Forums!
can you check my last post on this thread.
http://forums.lenovo.com/t5/IdeaPad-Y-U-V-Z-and-P-series/Lenovo-Z500-BIOS-legacy-support/m-p/1123377...
Make sure all of that are set. After you save and Exit start hitting F12 and it should give you the option to start Boot from CD/DVD.
Best Regards
Solid Cruver
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Similar Messages

How do I get MP to boot from SSD?

Hi, I plan on buying the new Intel X25-M Generation 2 as my boot drive and will put it in the lower optical bay. I suppose I'll boot from my Install DVD then format the SSD making sure it's a GUID partition and install OS X onto the SSD, but then how do I tell MP to boot from the SSD??
BTW, is it better to first boot up via my HDD to format the SSD. Then boot from the Install DVD and install OS X in the SSD?

Hi, I plan on buying the new Intel X25-M Generation 2 as my boot drive and will put it in the lower optical bay. I suppose I'll boot from my Install DVD then format the SSD making sure it's a GUID partition and install OS X onto the SSD, but then how do I tell MP to boot from the SSD??
The install process should set it as the boot voleme, but you can always use the "Startup Disk" system preference. Holding Option while booting will also let you choose the boot volume.
BTW, is it better to first boot up via my HDD to format the SSD. Then boot from the Install DVD and install OS X in the SSD?
It makes no difference.

How do i set up wireless printing from my iphone 3GS to my HP Photosmart 5510.

how do i set up wireless printing from my iphone 3Gs to my HP Photosmart 5510 e-all-in-one series B111-A? I have a Mac laptop with Snow Leopard

Hi JCMCCM,
You can get started with your iPhone by going to this link: http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02796271&cc=us&dlc=en&lc=en&product=5063582&tmp...
I am an HP employee

TA24960 How do you set a user photo from your photo library?

How do you set a user photo from your photo library?

What version of OS X are you running?

How can i set my calendar start from Monday NOT Sunday like it is now?

How can i set my calendar start from Monday NOT Sunday like it is now?

Read this thread: https://discussions.apple.com/message/11501621#11501621
For example, if you set the Regional format to United Kingdom, the days will be re-ordered but it will have other effects as well which you probably don't want.

How do I set up email addresses from my address book?

How do I set up email addresses from my address book?

I'm not sure exactly what you are asking. If you are coming from pre-Mountain Lion, then Address Book has changed to Contacts.
Open Contacts.
Select an Account in the group list, if you want the contact in a specific group. If Groups aren't showing, you can display them from the View menu.
Click the Add card button ( + ).
Enter the information for the contact.
If you need multiple entries for a particular field type, a new blank entry will show up below the one you are adding.
If you need other fields, use the Card menu to Add a new field type.
If you want to change the default fields available when you create a new card, choose Edit Template…
If you have sent emails to someone and you want to get that address to add to a Contact, use the Previous Recipients command in the View menu in Mail.
If you need to add a new Group, hover the cursor over the account name, and a + button will appear. Click it.

How do I set up birthday reminders from contacts? OS X 10.10.1

How do I set up birthday reminders from contacts? OS X 10.10.1

If you have birthdays setup in your Contacts app:
iPhone/iPad/iPod:
1. Check Settings > Mail, Contacts, Calendars > Default Alert Times > Birthdays > set your default time here.
2. In Calendar app > Calendars (bottom centre) > OTHER > make sure Birthdays is selected.
Mac:
Calendar app > Preferences... >
General > Show Birthdays calendar > make sure it is selected.
Alerts > Birthdays > set your birthdays default time here

HT204023 How do I set up to print from my iPad directly to a wi-fi direct printer WITHOUT going through my household wi-fi network/modem?

How do I set up to print from my iPad directly to a "wi-fi direct" printer WITHOUT going through my household wi-fi network/modem? I want to get rid of my household internet service/modem and only use my iPad, but need to be able to print. Please help! Thank you!

Depending on the printer, you may be able to connect/print by creating an ad-hoc (Wi-Fi direct with no router) connection. Check with your printer manufacturer to see if this is supported.
There's a ton of info out there. You could google "ipad print ad-hoc" for some useful info. But the number one thing for you right now is to verify that your printer model supports an ad-hoc connection.

Hard drive crashed, how do I set up itunes sync from iphone with new computer?

hard drive crashed, how do I set up itunes sync from iphone with new computer?

hard drive crashed, how do I set up itunes sync from iphone with new computer?

After OS Upgrade, Computer will No Longer Boot from Disc, Enter T-Disc Mode

I purchased the Leopard update about a week ago and proceeded to install it (upgrade option) on my MacBook Pro previously running Tiger. After this update, I no longer seem to be able to boot from a disc(c on startup), enter target disc mode(t on startup), enter single user mode(command s on startup), basically anything that requires hitting a key on boot. In short, the operating system seems to override any of those commands and just loads regardless of what I press.
How can I fix this?? I fear that if my mac suddenly dies, I won't be able to fix it with archive and install via the CD, since I can't boot from it. I also won't be able to recover my files with target disc mode or anything.
For more in-depth details:
-My hard drive does have an open firmware password- it was recommended as part of the undercover anti-theft program that I use. Although I can tell putting the password on was a mistake, since I've read that single user mode is no longer accessible with this password active. I don't think this is affecting my inability to boot from disc or target disc mode though, as I was always able to do this with Tiger, even with the firmware password active.
-I have tried booting from other discs, like my old tiger OS disc that came with the laptop- that fails too.
-My Leopard installation was not clean. Like many others, I used the upgrade option and it appeared to work ok- until restart, where I was faced with the blue screen. Since I was unable to boot to single user mode and try removing potential APE files, I let the computer sit for an hour on the blue screen until it finally loaded. Upon getting in, I found that I did not even have APE's installed. I proceeded to reinstall the operating system via an Archive & Install. Upon boot after this reinstall, I still received a blue screen that lasted a long time, and the OS loaded very slow. It did this for a few additional boots afterwards, and has appeared to smooth itself out now, a week later. The OS now loads fine and works alright (from what I can see), but I still can not boot from disc or anything else.
If anyone at all knows a solution for this, it would be much appreciated. I wanted to suspect something like the disc drive going bad, but being that things like the target-disc mode aren't working either- I'm hesitant to believe its just the disc drive. Being that it also happened just as I upgraded to Leopard and faced issues, I have more of a hunch that its something to do with Leopard.
I apologize if this has been answered before, but I've looked all over the site, google, everywhere I could think of and came up with no answer.
Thanks ~Brian

Hi, I have been having the exact same problem with a late 2011 MBP 15 inch. I replaced the hard drive with a samsung SSD 1.5 years ago, along with a samsung SSD in the optical drive. It worked great until the Yosemite upgrade. The MBP seemed to work reasonably well for a few days after the upgrade, but then it started stalling on various programs (spinning beach ball on Mail, Safari, etc). Start-ups were also longer and had a loading bar each time, which was new since the upgrade. I left the MBP to sleep last night and when opening it, it crashed and tried to restart. On restart it loads to the login screen, then after I enter the password it partially loads (based on the loading bar), then shuts off. I removed the SSD and plugged it in with a USG, but that didn't change anything. Here is a picture after using CMD-V before it shuts off.

Cannot boot from disc

Holding down "C" does not boot from disc. Computer does boot normally. After entering password -- which is accepted -- there is no dock or access to apps.
Reset PRAM does not work.

I just found another possibility:
So you cannot get to single user mode... can you get to open firmware, and reset the non-volatile RAM?
Cmd-Opt-O-F at boot
reset-nvram
set-defaults
reset-all
(each line exactly as shown, followed by <return>)
I'm now able to repair the volumes. Waiting for it to finish and reboot.

Satellite P300-1A8 will not boot from disc drive

Hi,
I had a little play with start up programs, partitioning the hard drive and marking as active and deleting programs i thought i did not need.
I obviously had no idea what i was doing!
Laptop will go to toshiba screen then goes blank, i can not boot from the disc drive.
I put the hard drive into another laptop and it works fine.
I put the hard drive of that laptop in the buggered one and that works fine.
How the hell do i put the original one back with it working??
Really really stuck with this!!!!!
Any help would be appreciated.
Only thing i havent tried is the recovery disc but im not paying for one if it wont boot as itl be a waste of money.
Seems like its a compatability problem with cpu and hard drive as they dont want to be friends anymore!!
Thank you in advance

Hi!
Can you boot in the safe mode?
If you dont have a recovery disk, use the Microsoft installation disk and try to boot from it.
And you said that you cant boot from disc drive, did you tried different disks?
Maybe some are not readable or not bootable.
The best way would be a recovery disk. The installation takes a few minutes and you have a clean installation with all drivers and tools from Toshiba.
Bye

MSI NF980-G65 freezes when trying to boot from disc

I just recently purchased and received an MSI NF980-G65 motherboard to work with my AMD Phenom II x6 1055T, but sadly I have had nothing but trouble.
So far the motherboard posts its bios and has the ability to detect any (and all) of my hard drives when I have them plugged in. The hard drive that has Windows installed on it currently informs me that I need to put in my Windows disc and run the repair utility, which makes sense since I was using a completely different motherboard and CPU before.
It is when I try to press any key to boot from disc that the problem arises. When I press a key on my keyboard while that prompt is on screen, the cursor jumps as if I had hit the tab key and does nothing further.
I have a total of three copies of Windows 7 at my disposal to use, two are DVDs I had burned from using my student discount to get them, and one set (32-bit and 64-bit) were in a retail copy of home premium, all of the discs performed the same action. I had tried using different SATA cables, different power adapters, and even different DVD players to try and remedy the situation.
The hard drive with windows is an IDE hard drive, but I have tried my other SATA hard drives just to be sure, none of which fixed the problem.
I have heard briefly about m-flash, but as far as I can tell, it would appear this new motherboard did come with the latest bios version (1.4).

For the boot, I have tried both setting up the DVD player as the initial boot, and I have tried just selecting it in the boot menu.
As per the posting guide, here are more specific information:
Processor: AMD Phenom II X6 2.8 GHz, 9.0 MB Total Cache, AM3 Socket
Motherboard: MSI NF980-G65 v. 1.2 bios (I'm going to try and flash this to a later now, I didn't know where to look for it before) , 601-7612-010B1004183389
RAM: G. Skill Ripjaw DDR3-1600 PC3-12800 2gb x 1 until I get this working, then it will be x4
Power Supply: Tagan BZ Series 700W
DVD: Samsung SH-S223 DVD burner with Lightscribe
HDD: Western Digital 250GB IDE drive

How can I set up a RAID 1 disc set

How can I set up a RAID 1 disc set using my existing Time Machine backup disk plus another HDD without loosing my backup?
Thanks

TM is the worst, most cantankerous Backup App I've ever encountered... I'd pride myself if I could come up with a worse one!
Get carbon copy cloner to make an exact copy of your old HD to the New one...
http://www.bombich.com/software/ccc.html
Or SuperDuper...
http://www.shirt-pocket.com/SuperDuper/
Or the most expensive one & my favorite, Tri-Backup...
http://www.tri-edre.com/english/tribackup.html

Set Bios to Boot from 2nd Hard Drive

Hello HP forum!
I have a situation that I am afraid may be hardware related, so this is my last attempt for help before I let it go.
In this laptop, I have two hard drive slots with two hard drives. The second hard drive was used as an HP backup/restore drive as shipped from the factory.
I would like to format and install an OS onto the 2nd drive for easy-peesy dual booting. (This is a work computer, so easy + time-efficient + low-risk is optimal). I have actually done this already, but the BIOS does not seem to detect two bootable hard drives. In the BIOS (pretty sure not EFI) boot list, it simply shows the option to boot from "Notebook Hard Drive", which boots from the 1st drive.
In my 1st Drive's Windows 7, I can read the contents of the 2nd disk, so it is definitely functional. Also, replacing the 1st drive with the 2nd drive, I can successfully boot from it, so it is bootable. This seems to imply that my hardware understands that there are two drives, but the BIOS does not recognize that port to be a bootable option, but only a storage option... I guess?
My question is, then, how can I set up my computer to give me the option to boot from either drive? Is it even possible on this hardware?
Thanks
Rex

Did you make sure to update your bios as that could be something that might require a bios update? Also if you can't see or locate that second drive in the BIOS you might not have the option to boot from the second drive? Does the bios also give you the option to boot from the cd drive? Your asking us to see a boot bios screen and unless some has your same make/model no everyone will be able to confirm or see what your asking so unless you can do more looking at all your bios options you might not have the option to boot from the second drive port.
I am a Volunteer to help others on here-not a HP employee.
Replies aren't online 24/7 because of Time Zone differences.
Remember in this Day and Age of Computing the Internet is Knowledge at your fingertips if you choose understand it. -2015-

How do i set it to boot from disc - lenevo G505s

Similar Messages

Maybe you are looking for