How do i set it to fit to screen to print the entire file?

How do i set it to fit to screen to print the entire file?  I have a file that is smaller than 8.5x11 but it says it's larger and clipping will occur and when I print it, it does not fit the paper.  Ive even clicked the box that says Scale to Fit Paper Size and it's still giving me that message and cutting info off. 
I also need to be able to size it by percentage so I can adjust it to fit into a pre made form Im working with.

First, I am new to this forum and I was told by Adobe that I would get help from Adobe as well as other users here, so that's why I posted.  But nobody asked me for basic info about image dimensions and printing sizes.  I never claimed to be an expert, just a basic user of PS, which is why Im asking for help.  I've used this program for my basic needs which is probably 1/1000th of what PS is capable of, but it's what I've used and I've always had success doing what I needed to do with it. If you can help, I very much appreciate it but if you just want to slam me and say you don't believe what I say, then that's not really helpful. Since nobody else responded to this post with any offers for help, the info you seek is below.  If you have any thoughts on how to help, I greatly appreciate it.
Im not sure how the image dimensions apply to my question at all but here they are: 3300x2550 with a 300 dpi resolution. 
Im simply trying to get the program to allow me to fit the image to the paper Im printing and adjust it as necessary to make it fit a partially pre-printed form I need for work and in every PS version I've used that I can recall, it allowed that.  It certainly allowed it, using the same printers Im using now, in CS5.
Also, you mentioned that the printer driver handles this but I can do this in every other program I have on this computer with the same printers, from Numbers (it's a Mac) to Preview to Mac Mail so why wouldn't it do the same thing in PS? That's what Im trying to find out here and with most software, I can pick up a phone or get on a one-on-one chat and get help, but apparently not with PS and since it's not a cheap program, I expected more.  I never needed to call for help before using this new version, so that's something I need to consider.
Again, if you are able to help, I appreciate it. Thanks!

Similar Messages

  • How do i set up my apple id with itunes and the appstore?

    How do i set up my apple id with itunes and the appstore?

    iTunes 10 for Mac: Set up an Apple ID account for use in the iTunes Store
    http://support.apple.com/kb/PH1726

  • I have just set up my Apple TV, how do I set it to show my screen on my TV

    I have just set up my Apple TV, how do I set it to show my screen on my TV

    Welcome to the Apple Community.
    AirPlay Mirroring requires a second-generation Apple TV or later, OS X 10.8 or better and is supported on the following Mac models: iMac (Mid 2011 or newer), Mac mini (Mid 2011 or newer), MacBook Air (Mid 2011 or newer), and MacBook Pro (Early 2011 or newer).

  • How can i set a layout for MIGO screen

    Hello all,
    How can i set a layout for MIGO screen. & make that layout default. Like i want to drag Requistioner column next to quantity in MIgo screen. temporarily I can drag but is there a way to save as layout & save it.

    Hi
    First you arrange however you want and then go to table settings which is there in the right corner of the item details and create a variant and save.
    Find a button with blue yellow and white at the top end above the vertical drag bar when put the cursor it will show you as Configuration.
    After creating the variant tick the check box use as standard setting below the variant
    Hope it helps
    Edited by: Girish  Adaviswamy on Mar 3, 2010 1:27 PM

  • How do I set up my new Macbook Pro without using the annoying Voiceover?

    How do I set up my new MacBook Pro without using the annoying Voiceover?  I cannot get it to work right; it seems to get stuck and repeats the same thing over and over.  It is driving me nuts!  Is there a way to begin the setup process without using the Voiceover system?  I am a new convert from a PC and I thought a Mac was supposed to be "intuitive!" 
    Any help is appreciated.
    Thanks.
    Pamela

    There is no good reason to register your Mac anyway.
    You can opt out of the setup process and registration by pressing Command (Apple key) and the "Q" key.
    The registration process requires you to divulge a lot of unnecessary information.

  • When I send an email the rely comes into another account in my apple email.  How do I set it so that my email comes to the correct address?

    When I send an email the rely comes into another account in my apple email.  How do I set it so that my email comes to the correct address?

    Hi Sunny C,
    Welcome to the Support Communities!  The "From" field should be showing by default, but you can check or change your settings for Mail with the instructions below:
    Mail (Yosemite): Set Mail preferences
    http://support.apple.com/kb/PH19178
    In the Composing pane, you can set the email account that you want to send new messages from.
    Also, check the View command on the Menu bar.  View > Message Attributes should have a checkmark beside the "From" field.
    Cheers,
    Judy

  • How do I set up security on my linksys router after the i...

    How do I set up security on my linksys router after the install of a net gear wireless pc adapter?

    Setting up your wireless connection in your router.
    1.Open Internet Explorer and type 192.168.1.1 into the address bar.
    2.You will now get a sign-in box, User Name = (Leave Blank)
                                                           Password = admin (all lower case letters)
    3.Once the set-up page opens, click on the Wireless Tab as youwill need to change the settings. A) Wireless Network Mode = Mixed
                  B) Wireless Network Name (SSID) = Choose any name and do not use Linksys.
                  C) Wireless Channel = 1, 6 or 11 is best, so see which work best for you.
                  D) Wireless SSID Broadcast = Enabled.
    4. Now go to the bottom of the page and click on save settings.
    5. Click on the Wireless Security Sub tab.
                  A) Security Mode: WPA
                  B) WPA Algorithms: TKIP + AES
                  C) WPA Shared Key:  Type 24 letters, and numbers using lower and upper case letters
                  D) Group Key Renewal: 3600
    6. Once again go to the bottom of the page and click on Save Settings.
    7. Now you can close out of this page.
    8. You will now need to enter the security info into your computer. I will now give you 2 links, depending which operating system you have, Vista or XP you will follow the one you have.
    Vista = http://www.home-network-help.com/wireless-adapter-configuration-in-vista.html
    XP = http://www.home-network-help.com/wireless-adapter.html
    Now try to make a wireless connection.
    Good Luck,
    Ttech

  • How do I set up my 3520 Deskjet to e-print in windows 8

    how do I set up my 3520 Deskjet to e-print in windows 8

    Hi,
    Please download and install drivers first:
       http://ftp.hp.com/pub/softlib/software12/COL42544/​al-108812-3/DJ3520_1315.exe
    then install the following ePrint software:
       http://ftp.hp.com/pub/softlib/software12/COL39376/​lj-96046-6/HP-ePrint-win-4.6.60.12747.exe
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • I have justed upgraded CS2 to CS5. How do I set artboard crop or trim marks for printing?

    I have justed upgraded CS2 to CS5. How do I set artboard crop or trim marks for printing?  It was under the "OBJECTS" menu in CS2, but I can't find it in CS5.

    it actually works the same way but better you don't see it that way but with perhaps more experience you might catch on and say "oh now I see that' all I have to do.
    Multiple artboards, which you did not have in CS 2 , changes the equation.
    When you open a new document you can set up a gangup in the new document dialog then say for a business card then do one business card in the first one.
    Then copy the art and text of that first one and in one command paste that art in all of the artboards with one command, you can then make another artboard that encompasses all the artboards and you now have a gang up say six up you can now print all a once as a gang up or print a range of the artboards or specific artboards.
    As a matter of fact now that you can paste on all artboards with one command AI CS 5 actually has a step and repeat feature that works verticaly and horizontally at the same time. And an improved version is easily had.
    Also since you probably know how many you need of this first artboard then you can simply make one rectangle for for the first artboard and give it a crop area effect and when you do your copy include the rectangle and then paste on all artboards and there you are
    look at the video, see how cool. less complicated not more complicated. And as other users explore this function I bet they come up with even better ideas.
    http://mysite.verizon.net/wzphoto/Artboards.mov
    I am going to make one adjustment here instead of doing a command c to copy the first artboard it would be better to do a command x to cut the first one since the command paste on all artboard does exactly that. So if you do a command c and a command option shift v then you have two rectangles and art and crop marks pasted on top of each other. Probably won't do any harm but might be confusing in the layers panel.

  • Hi iv got a sky router downstairs and a time capsule up stairs how do i set it up so that it just extends the sky wifi and then the hard drive in the time capsule is accessible from all over the house thanks

    hi iv got a sky router downstairs and a time capsule up stairs how do i set it up so that it just extends the sky wifi and then the hard drive in the time capsule is accessible from all over the house thanks

    Connect an Ethernet cable from one of the LAN <--> ports on the back of the Sky router to the WAN (circle of dots icon) port on the back of the Time Capsule. This connection must be maintained at all times.
    Then, using the setup "wizard" on your iMac illustrated below, configure the Time Capsule to create a wireless network that uses the exact same wireless network name and password that the Sky router is using.
    You can get the setup wizard going in several different ways, but the simplest might be to click the WiFi icon at the top of the Mac's screen and then click on Time Capsule under the heading of New AirPort Base Station.
    The wizard will open up and analyze the network, then the suggest the correct setup. The example below shows an older AirPort Express that is about to be setup in the same way. You will see a Time Capsule icon on your screen when you run the setup wizard.

  • My daughter currently uses my apple ID.  How do I set her up her own account but keep the music we have purchased

    My daughter currently uses my Apple ID.  How do I set her up her own ID but retain the music she has purchased?

    You cannot associate previous purchases with a new ID.
    A specific answer as to how to otherwise share media will depend upon your computer setup, about which we currently have no idea. Do you have more than one, at they networked, does she use the media on an i-device?

  • How can i print just one page of photo book without printing the entire book

    how can i print just one page of photo book without printing the entire book

    Jim,
    Take heart.  We can help.
    First turn on page view so you can see how the content of your sheet fits on the page(s).  A Numbers document contains sheets (listed on the left) which in turn contain tables, charts, text, and graphics.  Select the sheet you want to print on the left, then enable page view by selecting the menu item:
    "View > Show Print View":
    Now you should see your content and how it fits on one, or more, pages.  If thie content is too big for one page use the controls and the bottom left of the window to expose the sheet controls:
    Here a table is too big to fit on one page:
    slide the "Content Scale" slider so the content fits:

  • To set a dropdown list for one column in the excel file before downloading

    Hi all,
    I am downloading an excel file which has the format of an internal table with a number of fields. I want to set a dropdown list for one column in the excel file. How can i do this?
    Thanks

    HI ,
    U can use function module " QINT_GET_EXCEL_DATA " ....
    and modify the excel sheet based on ur requirement ......
    Try this ...
    Hope it works
    Thanks
    Shambhu

  • How do i show the filename.type instead of the entire file path?

    How do i show the filename.type instead of the entire file path?
    I want it to show "ProgramSetup.exe" instead of "C:/Program Files/Oracle/JavaFX/ProgramSetup.exe"
    I have created a JavaFX program with the help of my manager
    below are the code
                   File file = fileChooser.showOpenDialog(Admin.mainStage);
                   if (file != null) {
                        textFiles.setText(file.getAbsolutePath());
                        String absolutePath = file.getAbsolutePath();
                        //String fileName = new File(absolutePath).getName();the reason i put the last line as // because it has error on that line....
    if i remove the last line, it will display but with the full path....
    i search through google and the guide on many forums aren't clear to me.....some said there are 2 ways but i tried and it is not working, atleast for me...maybe i left out something or what....can anyone help me on this?

    You don’t need the absolutePath:
    File file = fileChooser.showOpenDialog(Admin.mainStage);
                   if (file != null) {
                        textFiles.setText(file.getName());
                               }

  • How can I import an Aperture Catalog into Lightroom and retain the RAW file as well as the files with the edits?

    I have several catalogs in Aperture that I would like to import to Lightroom 5 and I want to retain the original RAW files as well as the files with the edits.  How can I do this?

    Well, you can bring in the raw file (without edits), and you can bring in a rendered RGB file (e.g. jpeg or tiff) with edits baked in, but what you CAN'T do is bring in a raw file, with the non-destructive Aperture edits, and have Lr translate those Aperture edits into Lightroom edits.
    Put another way: no raw converter/editor can understand the edits of any other raw converter/editor. So, you have to work with a rendered version, and/or re-edit from scratch in a new raw converter/editor.
    PS - it would be feasible to write a rough translator which approximated raw edits in one world into edits in another, but such does not exist yet for Aperture -> Lightroom, that I know of.

Maybe you are looking for