How do i set manual ip addresses for connect to wifi network which had setted with manually ip addresses?

i had set ip addresses for my home wifi network manually,and now i want to connect my iPhone5 to this network.the phone can't connect.what i have to do?after changing the wifi network setting (channels and another things)i cant connect even.i want to reslove this problem.would you help me?!

Just thought I would bump this up in the conversation. Doing a further search I came across this discussion which is similar: Connecting to a wireless network via applescript?
However, I tried to build the Automator application as discussed and cannot get it to work. Very much a novice at Applescript and Shell Script but have created customized Automator services before. All I get now is "Shell Script command encountered an error". No more detail. I copied and pasted the script as shown in the email thread. Is there any other line or command I need to place in front of it?
Thanks again for any help

Similar Messages

  • Want to remove the email address for renewing of 2 apps - and replace it with my email address

    Want to remove the email address for renewal of 2 apps on my iPhone and replace it with my current email - how can I do this???

    Changing the email address you use for your Apple ID -
    http://support.apple.com/kb/HT5621

  • My iphone is lost. Find my iphone is enabled. Problem is how can anyone who found my iPhone gets connected to wifi, when I had already put my passcode on my phone? In this way, how can I track my phone using Find my iPhone?

    Hello all,
                   My iPhone 4 has been lost recently. I had turned my Find my iPhone enabled and my passcode was also on. Now that I lost my phone, the person who find my phone cannot be tracked in my assumption. Because, he can never get connected to other wifi when unknown passcode is there. So, please tell me any suggestions that helps me find my iPhone or track it.
    Regards,
    Manish Dangi
    Nepal.

    If you can go to https://www.icloud.com/#find - sign in and then click on your device
    If who ever has your phones - tries to unlock it while connected in any manner - you will be able to see the location on the icloud site
    Also take the steps in this article
    If your iPhone, iPad, or iPod touch is lost or stolen - Apple Support

  • Log connection attempts and source IP address for connections that fail/timeout on RADIUS

    How can I log the connection attempts and source IP address for connections that fail RADIUS authentication?  I'm using RD Gateway on 2012 R2 in conjunction with Azure Multi-Factor Authentication Server on another 2012 R2 server.  When a user fails
    multifactor authentication or the authentication times out, all I get is Security event 6273 on the RD Gateway that the radius server did not process the request, and only the radius server's IP is logged.  There's nothing logged in TerminalServices-Gateway\Operational
    because the TS Gateway hasn't yet processed the connection attempt (all auditing options for RD Gateway are enabled).  The MFA/Radius Server is only logging the connection from the TSGateway - it doesn't know the original client's IP address.
    I'm looking for the equivalent of an IIS log - somewhere the RD Gateway should log the initial HTTPS connection attempt and the source IP address of the client.  I need to be able to track down potentially fraudulent login attempts. 

    Hi,
    Thank you for your posting in Windows Server Forum.
    This error might be caused by one of the following conditions:
    •  The user does not have valid credentials
    •  The connection method is not allowed by network policy
    •  The network access server is under attack
    •  NPS does not have access to the user account database on the domain controller
    •  NPS log files or the SQL Server database are not available
    To perform these procedures, you must be a member of Domain Admins.
    Please check for more information:
    Event ID 6273 — NPS Authentication Status
    http://technet.microsoft.com/en-us/library/cc735399(v=ws.10).aspx
    Hope it helps!
    Thanks.
    Dharmesh Solanki

  • The ikon for connecting to wifi no the top is gone..? How to find it ?

    Hi! The ikon for connecting to wifi at the top is gone and I wonder how to find it and activate it Afghanistan?

    Hi andy,
    I have the same ports as you on my Ti and my TV and the 4 pin S-Video cable works just fine.
    I also have an S-Video to RCA adapter, and the S-Video end has 6 pins, so I'm thinking that the extra 2 pins have something to do with converting from S-Video to RCA.
    I don't know if the UK has Radio Shack stores, but a quick call to an electronics store like that should yield a definitive answer to the extra 2 pins if you really want to know.
    BTW how do I add a link to a message without showing the whole address.
    That's called html language. Do a google and you'll come up with all kinds of fun things you can do with html.

  • How do I delete an Apple ID account. I apparently have 2 IDs associated with one email address.

    how do I delete an Apple ID account. I apparently have 2 IDs associated with one email address.

    If you go onto your ipod, under settings, scroll down to icloud, there should be a botton that says, "delete account". push this, and it should delete an account.

  • I entered the incorrect password for my home wifi network and now I can't change it. How do I clear out the wrong password so that I can enter a correct one?

    I entered the incorrect password for my home wifi network, and now I can't change it. How do I clear out the wrong password so that I can enter a correct one?

    Settings > wi-fi  then tap on the little blue arrow next to the network you want to change. You have to tap on the blue arrow and not on the name.
    Now at the top tap on "forget this network".
    After that, the iPhone will think your home network is a new network and will ask you for the password to connect.

  • HT4859 I have an iPhone 5 and have just set up the iCloud for it. I also have an iPad with different content and I also want to connect it to iCloud. Will I lose everything that's on my iPad or iPhone or do they sync together without losing anything?

    I have an iPhone 5 and have just set up the iCloud for it. I also have an iPad with different content and I also want to connect it to iCloud. Will I lose everything that's on my iPad or iPhone or do they sync together without losing anything?

    The problem is that all services are bundled with your Apple ID ([email protected]):
    Your iCloud account (Mail, Contacts, Calendars, Reminders, Notes, Backups, etc.),
    also iTunes & App Store purchases (Music, Movies, TV Shows, etc.),
    and the iTunes Match services.
    (I guess that all your devices - yours and your wife's are connected to one iTunes library, right?)
    If you want that your wife gets her own iCloud account for Mail, Contacts, Calendars, etc. but gets also access to your media then you have two set up two things on her device:
    iCloud (Settings > iCloud) with her account (e.g. [email protected])
    and
    iTunes & App Stores (Settings > iTunes & App Stores) with your account (e.g. [email protected]).
    In this case she gets access to your library and could use the same iTunes Match account.
    (See also: Using one Apple ID for iCloud and a different Apple ID for Store Purchases http://support.apple.com/kb/HT4895)

  • How to view all attachemt in outlook for user in my network

    Hello,
    how to view all attachment in outlook for users in my network
    i am used below path:
    "C:\Users\ username \AppData\Local\Microsoft\Windows\Temporary Internet Files\Content.Outlook"
    All attachments
    I can not find some attachments exist on the
    email did not find her on the track
    above.
    thanks

    Hello,
    You may also try this VBA solution:
    https://gallery.technet.microsoft.com/office/Save-attachments-from-5b6bf54b
    Regards,
    Steve Fan
    TechNet Community Support
    It's recommended to download and install
    Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
    programs.

  • I want to enter the password for a secure WIFI network on several iphones.  If I do this, can the end users somehow extract the ip address and password for the wifi network from the iphone and use it from a pc (at home, for example)?

    I want to enter the password for a secured wifi network on several iphones.  If I do this, is it possible for the end users to somehow extract the ip address and password information and use it from a pc/laptop/other mobile device.  For security reasons, I don't want them to be able to to this.
    Please advise,
    Thanks.

    If you look at the top left of your screen you will either see a 3G (or 4G if you have AT&T) or you will see the wi-fi symbol.  If you don't see the wi-fi symbol you are connecting to Gmail through your cellular data plan, not via wi-fi.
    To answer your question, it doesn't happen often but when it does the steps I mentioned above will normally resolve it.  Hopefully you won't have any further problem with this.

  • How Does one fix this-"This Mac can't connect to iCloud because of a problem with "My Email Address"

    Hello Apple Community:  I receive this message multiple times a day. 
    "This Mac can't connect to iCloud because of a problem with "My Email Address"  Open iCloud preferences to fix this problem. 
    After sighing into iCloud I can not find a problem.
    Is this a Yosemite issue, because thats when the issue started?
    Thanks for your help..

    Yes, this is a constant problem for me as well.  I have 2 Macs (iMac and old MacBook Pro) running Yosemite. I seem to only get this message on the iMac. I've tried logging out of ICloud on both and logging back in; the problem re-appears randomly.  I also have no issue on IOS devices.
    It's mainly annoying. I open the iCloud panel in System Preferences and it tends to go away.

  • I am the administrator for an Adobe CC team which I set up yesterday.  I invited a co-worker to join

    I am the administrator for an Adobe CC team which I set up yesterday.  I invited a co-worker to join the team, but she is experiencing difficulty getting appropriately verified.  Consequently, she cannot access the CC apps.

    Hi SBIBBS,
    Your co-worker needs to log in to Creative Cloud to download and install applications see [http://helpx.adobe.com/creative-cloud/help/install-apps.html] for a solution
    You can also refer this [ http://helpx.adobe.com/creative-cloud/creative-cloud-teams.html ] for other creative cloud team issues.
    Let me know if it helps.
    Regards
    Eshant

  • How can I get my wireless printer to join my wifi network?

    Since HP Setup Assistant doesn't work with Mavericks, is there another way to get my wireless printer connected to my new wifi network? This printer (HP Officejet Pro 8000 A809) worked just fine with Mavericks on my old wifi network. But my DSL provider recently installed a new router, so I have a new wifi network, which  works just fine with everything else.
    I was able to get my two Airport Expresses to join my new network, using Airport Utility, but I'm stumped as to how to get my printer to join the new network without the aid of HP Setup Assistant.
    Following the advice of Shlomi, I managed to reset my printer so that it now appears in my list of wifi networks under Devices, as hpsetup. But that's as far as I got. Any help would be most approeciated.
    This question was solved.
    View Solution.

    Bruce777 solved this for me, thank you Bruce! My printer now works perfectly on my new wifi network!
    Bruce's  instructions, for anyone else having the same issue:
    - delete any previously set up printers
    - scrub old hp software and update software to get the hp 2.8 drivers
    - remove the usb cable from the printer if you have one connected
    - reset the printer network to hpsetup (hold down the power button and press network button 2x and then cancel 3x, release power button.)
    - print out the wireless network test report (hold down the network button and press the update button 2x). verify the network name / ssid is hsetup
    - got to sys prefs > network and change the mac wireless network to hpsetup
    - go to the sys pref > print scan
    - add the HP 8000 printer
    - click on the options and supplies button and click on the Show Printer Webpage
    - click on the networking tab > wireless in the left pane > start network wizard and change the network from hpsetup to your network
    - finish (this page may freeze up.  close the browser)
    - go back to the sys prefs and change the wireless network back to your networt
    - go to the printer and print out the wireless network test report (press network button and update button 2x).  Check that the SSID is your network
    - go to sys prefs > print scan > select your printer > options & supplies > show printer webpage > network info (check ssid and compare to wireless network test report)
    - try printing something to your printer.  It might take a little time the first print.

  • Adobe AIR for mobile closed wifi network

    Creating a game that will ONLY be used in a closed network of less than a dozen iphones, ipads.
    What I need to figure out is the simplest solution for storing names with high scores for each completed game session.
    I was thinking of perhaps using one iPad as a dedicated hotspot, and storing a simple text file that would be saved and loaded by all the other iphones-ipads on the closed wifi network.
    Can anyone with AIR mobile networking knowledge tell me if this will work and or provide a better solution?

    It appears you may be confusing iOS with Android a little bit. The article you referenced was speaking solely about iOS, not Android. So, yes, they were correct.
    Now, there is a new option in AIR 3 that allows you to package your applications WITH the AIR Runtime for Android. This is called "Captive Runtime" and allows you to create applications that do not need to reach out to grab AIR from any marketplace because it is already packaged.
    Here is more information on Captive Runtime:
    http://www.tricedesigns.com/2011/08/10/air-3-0-captive-runtime/
    Here is how you can set up Flash Pro with AIR3:
    http://www.swfgeek.net/2011/09/26/targeting-flash-player-11-rc1-air-3-rc1-in-flash-profess ional-cs5-5/
    Note that if you are using Flash Pro to create an app with AIR 3 you will need actually package the app with the Command Line. The tooling is not yet available in Flash Authoring Environment.
    Here is how you can do that:
    http://www.youtube.com/user/iBrent#p/u/6/MRcoJ6ClLqo
    it is similar to this, but with slightly different switches. There is more info in the command line help.

  • HT201945 How do I use my time capsule on an existing WIFI network?

    How do I use my Time Capsule on an existing WIFI network?

    Use an Ethernet cable to connect from one of the LAN <--> ports on your existing wireless router to the WAN "O" port on the Time Capsule and then use the setup "wizard" on your Mac to configure the Time Capsule.
    It will suggest that you set up the Time Capsule to create a new wireless network. If you don't want or need another wireless network, you can turn off the wireless function of the Time Capsule and use it as wired hard drive only.
    Leave the Ethernet cable connected at all times. If you need to locate the Time Capsule in a different area, you can put it anywhere that the Ethernet cable will reach up to about 330 feet or 100 meters.
    The only exception to using an Ethernet cable would be if your existing wireless network is provided by another Apple router. Then.....you would have the option to have the Time Capsule connect using wireless and extend the network, although using a wired connection would still be the better way to go in terms of performance.

Maybe you are looking for