How do I set my printer settings for a Canon Pixma MX870?

I have installed and updated the drivers.
It currently prints out coloured, one sided pages. I prefer two sided, B&W quick print settings.
I need a step by step run through on were to find these settings.
On my Brother's PC he has 'Canon My Printer' which is were he set up the setting for his computer. It was not on the instualtion disc for the printer and I can't seem to find the download on the Canon website.
Im on OS X Lion 10.7.4.
Please Help.

I knew that was going to be an issue. Renaming the audio files. To change the name of an audio file do it within the project. You want to go to the media bin. where your audio files are. _WITH IN THE PROJECT_. You can just double click on them and rename them. and yes be very name specific. so no audio file ever has a chance to have the same name.
The audio files in the bin are in there own separate folders. You want to rename the folder that contains the audio file to, eg, Mary had a little lamb kick drum take 752. The renamed audio file folder will reflect in the timeline and in your project audio folder. But now the audio file can have a different name than the folder, the next is least important, but you may just want your track to be called Kick. So you can double click on the track header and give it a name kick. then you can right click on the audio in the timeline of the corresponding track and select, Track names to regions. Now the track name, the region within the timeline, and the region within the Mary had a little lamb kick drum take 752 folder within the bin will have the name kick. but wait there's more, lol. just kidding.
So maybe the case is now that you don't really want to put all audio files from all songs in one folder, just all audio files from one song into one folder right.
This way each song has its own folder containing the audio. This is standard practice. Its just a given when you create a project.

Similar Messages

  • How could I set the proxy settings for just some URLs and not for all?

    Hello,
    I am using HttpURLConnection to establish a HTTP connection . The connection pass through a proxy, and it requires security.
    I know that I can set the proxy settings in the system properties, and this works perfect.
    But I don't want to set the proxy settings in the system properties, because this proxy settings will be for ALL the URLs, and I just want for a few URLs.
    How could I set the proxy settings for just some URLs and not for all?
    Thanks

    java.net.URL.openConnection(java.net.Proxy proxy)
    @since 1.5

  • How do I set the conversion settings for Word to ignore outline autonumbering for headings?

    I have a user manual in Word that uses outline autonumbering for Heading 1, Heading 2, etc. For example, "1.0 Introduction," "1.1 System Settings" and so on).
    I know when setting the conversion settings for FrameMaker, you can select the Ignore Autonumber option in the Conversion Settings dialog to keep only the paragraph content. I don't see anything like this for the Word Conversion Settings. Does this capability exist?

    To clarify:
    I have my paragraphs in Word set up with the required numbering properties using Word's Style settings. In Word, I want the headings to be numbered 1.0, 1.1, 1.1.1, etc. because the intent is for the reader to read through the manual like a book - from start to finish.
    I'm single-sourcing my manual from Word into RoboHelp to generate an online help package. However, I do not want my RoboHelp headings to be numbered because the user may or may not read each topic in order (in other words, they may only need to read what's in section 3.2, but won't get there by reading sections 1.0 through 3.1 first). I might also clarify that each heading is its own topic - so Section 3.2 would be a separate topic from 3.0 and 3.1.
    So for example, in Word, it reads like this:
         "1.0 Introduction
         [content goes here]
         1.1 System Requirements
         [content goes here]
         1.2 References
         [content goes here]"
    And in RoboHelp, I want it like this
         "Introduction
         [content goes here]"
         ---[end of topic]---
         "System Requirements
         [content goes here]"
         ---[end of topic]---
         "References
         [content goes here]"
         ---[end of topic]---
    Does that make sense?
    So how do I keep the numbering in my Word document, but set up the Conversion Settings in RoboHelp to ignore those numbers and only include the text following the autonumber? I have been able to do this when single-sourcing a FrameMaker book into RoboHelp.

  • How do you access full printer settings for printing?

    I wanted to print something for the first time yesterday.
    I've got 3 printers attached used for different things.
    When I selected print it brought up a basic print box that let me choose printer, paper type and size, but I couldn't access any more specific settings - specifically one of my Canon printers has A4 paper loaded in a tray for documents and 6x4 paper in the auto sheet feeder - I couldn't find a way to change which paper source to use, and the printer is in another room conneceted via an Airport Express to save a bit of space.
    Is this another 'dumbed down' feature of iLife '08?
    AC

    The Advanced tab comes up after you press print on the 'simple screeen'.
    Oh Well.
    Ac

  • How do you access full printer settings for printing? (sorry if duplicate)

    I wanted to print something for the first time yesterday.
    I've got 3 printers attached used for different things.
    When I selected print it brought up a basic print box that let me choose printer, paper type and size, but I couldn't access any more specific settings - specifically one of my Canon printers has A4 paper loaded in a tray for documents and 6x4 paper in the auto sheet feeder - I couldn't find a way to change which paper source to use, and the printer is in another room conneceted via an Airport Express to save a bit of space.
    Is this another 'dumbed down' feature of iLife '08?
    AC

    on the first print page click print after you have done any themes, etc you want. On the second print page click advanced - you should find them on the thrid page then
    Larry Nebel

  • How to set tagged pdf settings for batch process

    Framemaker doesn't allow me to set tagged pdf settings without opening a file (i.e. *.mif/*.fm/*.book).We are using .MIF files to generate PDF in an automated process.( .MIF files will be sent to FrameMaker as a batch file using DZBATCHER then it it uses distiller to produce the PDF).
    How can I set tagged PDF settings for this kind of operation?

    Tagged PDF info is a document level property, i.e. you need to define it in the MIF. Check your MIF manual for: <DPDFStructure and <DPDFStructureDefined statements.
    Note: If you're using any FM version earlier that FM9 and not the FrameServer version, please read your EULA very carefully (Section 2.2 - 2.4) concerning automated creation of PDF files. With FM9, the restriction apparently has been loosened to only how the process is intiated (Section 2.3).
    Copies of the EULAs can be seen here: http://www.adobe.com/products/eulas/

  • I want to set default printer settings to be used only for a specific type of application, certain documents. All other print jobs should use a different default setting for the printer.

    I am printing a specific document from a web based application. This document need to be printed in landscape. So I would like to set the default settings for this specific printer to landscape. But for all other printers it should be portrait. But this does not seem to work. The browser picks the settings from the standard/default printer and uses this for all print jobs.

    Embie wrote:
    I was told by support that my problem was a hardware problem and that HP would not replace the faulty hardware.  Great.  I will replace my faulty hardware manufacturer.  Simple, HP never again.
    In the hour since you have registered you have posted seven messages, none of which contain any useful information that would allow someone here to help you.  Please read this post then provide some details in a new thread.  What printer model? What operating system? How is the printer connected - USB, wired LAN, Wireless LAN, bluetooth?  What is the problem you are having (with the printer...)?
    Bob Headrick,  HP Expert
    I am not an employee of HP, I am a volunteer posting here on my own time.
    If your problem is solved please click the "Accept as Solution" button ------------V
    If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

  • HOW DO I CHANGE MY PRINT SETTINGS SO THAT THEY STAY SET TO MY PRINTER DEFAULTS?????????????????????????????????????????

    This one issue is probably the one thing that would make me abandon Firefox FOREVER (besides the problems with Flash). If I change print settings for ONE COPY I have nothing but HELL trying to get my print settings BACK to my PRINTER defaults. Why can't Firefox be like the REST of the computer world and have the PRINTER DEFAULTS override Firefox?????
    I made a change yesterday and I have NOT been able to get it changed BACK to the defaults.
    Is thois too complicated?

    Hello Grillmark55 , any luck if you [https://support.mozilla.org/en-US/kb/fix-printing-problems-firefox#w_reset-firefox-printer-setting Reset Firefox printer setting] ? , if the above link is not helpful then see: [https://support.mozilla.org/en-US/kb/fix-printing-problems-firefox#w_reset-firefox-printer-setting Reset all Firefox printer settings]

  • How can I set default printer options on an iMac for an HP pro 8500 printer to print in draft mode?

    How can I set default printer options on an iMac for an HP pro 8500 printer to print in draft mode?

    When you use the Canon driver, the 2 sided printing is set in a different location. There is an entire menu dedicated to it (at least on my mx892). The printer dialog box has a menu selector in the middle of the screen (I think it says "layout" by default). If you click on it, you will see the duplexing options at the bottom. Much more flexibility than the single checkbox available with "airprint". The interface is unusual (at least for me) but you can pre-set up many different configurations (Fast Duplex, Fine Single-sided, B&W, Photo, etc etc.)

  • How do I set a defauly orientation for printing?

    How do I set a default orientation for printing? 

    "Aperture has no such feature. The Apple web site has lot of downloads, some i'm sure should do what you want, in conjunction with Aperture. Allan"
    Allan where on the Apple website would such downloads be? This is news to me! LOL!
    Message was edited by: DVX100Shooter

  • How do you set up Port Forwarding for ARD 2.2 in AEB N?

    Help,
    I'm a novice at Apple Remote Desktop (ARD) - not an IT guy, so it has to be pretty basic and detailed.
    How do you set up Port Forwarding for ARD 2.2 on the Apple Airport Extreme BS router, 802.11 N. I have one at each end of the internet connection. At one end I have an Airport Extreme N router with 2 macs and eventually 1 windows XP machine (if I can) that I would like to be able to connect to over the interenet (the clients) and at the other end, I have a Mac with ARD 2.2 installed also with an Airport Extreme N router. Note: Both routers use Static IP addresses and all computers use static IP's internally not through DHCP. What are the settings or directions to do this.
    I have read and printed out the directions for Configuration of ARD 3.0 that are posted many times in the ARD discusion group, but it uses a Linksys router ( http://www.starkpr.com/ard.htm posted by Dave Sawyer). The Mac router is different, particularly with the place to set a Private IP address. I'm not sure about alot of things, but especially about the Private IP address, what number do I set it to, the one that is in my Network connections list? It automatically changes to a different number in AE N setup for Port Forwarding (by one) as if it is not suppose to the same?????
    Are there any directions available that are as straight forward for the Airport Extreme N router, as the one's that are listed here for the Linksys Router's? ( http://www.starkpr.com/ard.htm )
    Any and All help will be greatly appreciated.
    P.S. I know I should have 3.0 but bought 2.2 just weeks before 3.0 came out and they would not give me an upgrade price, so I'm waiting for 4.0 to upgrade.
    Thanks,
    Jim

    Try the following for each AirPort Extreme ...
    AEBSn - Port Mapping Setup
    To setup port mapping on an 802.11n AirPort Extreme Base Station (AEBSn), either connect to the AEBSn's wireless network or temporarily connect directly, using an Ethernet cable, to one of the LAN port of the AEBSn, and then use the AirPort Utility, in Manual Setup, to make these settings:
    1. Reserve a DHCP-provided IP address for the host device.
    Internet > DHCP tab
    o On the DHCP tab, click the "+" (Add) button to enter DHCP Reservations.
    o Description: <enter the desired description of the host device>
    o Reserve address by: MAC Address
    o Click Continue.
    o MAC Address: <enter the MAC (what Apple calls Ethernet ID if you are using wired or AirPort ID if wireless) hardware address of the host computer>
    o IPv4 Address: <enter the desired IP address>
    o Click Done.
    2. Setup Port Mapping on the AEBSn.
    Advanced > Port Mapping tab
    o Click the "+" (Add) button
    o Service: <choose the appropriate service from the Service pop-up menu>
    o Public UDP Port(s): 3283
    o Public TCP Port(s): 3283
    o Private IP Address: <enter the IP address of the host server>
    o Private UDP Port(s): 3283
    o Private TCP Port(s): 3283
    o Click "Continue"
    o Click the "+" (Add) button
    o Service: <choose the appropriate service from the Service pop-up menu>
    o Public UDP Port(s):
    o Public TCP Port(s): 5900
    o Private IP Address: <enter the IP address of the host server>
    o Private UDP Port(s):
    o Private TCP Port(s): 5900
    o Click "Continue"
    o Click the "+" (Add) button
    o Service: <choose the appropriate service from the Service pop-up menu>
    o Public UDP Port(s):
    o Public TCP Port(s): 5988
    o Private IP Address: <enter the IP address of the host server>
    o Private UDP Port(s):
    o Private TCP Port(s): 5988
    o Click "Continue"
    (ref: "Well Known" TCP and UDP ports used by Apple software products)

  • How do I set my printer to black and white ONLY?

    I have an HP Photosmart All-In-One C4480.  I don't want to have to buy color cartridges, because I only need black and white, and I have three black and white cartridges already.  How do I set the printer to print my documents in black and white only?
    Thanks,
    TW

    Hi,
    Follow the steps below to print using Black Ink only:
    1. From the application used to print, click the File menu and select Print. The Print window appears.
    NOTE: The Print window might be minimized: Click the Show Details button to see all available settings.
    2. To access the color options, click the lowest selection box listed as the name of the program (e.g. TextEdit)
    Will appear as Copies & Pages within Microsoft Office applications.
    3. Select Paper Type/Quality from the drop-down menu.
    4. Click the triangle next to Color Options to expend the settings.
    5. Set the Color field as Grayscale.
    6. Set the Grayscale Mode as Black Ink Cartridge Only.
    You may save the settings for future use by clicking Presets > Save Current Settings as Preset...
    Any used preset will remain default so simply select teh standard preset to print in color.
    Shlomi
    Say thanks by clicking the Kudos thumb up in the post.
    If my post resolve your problem please mark it as an Accepted Solution

  • How do I set my firewall settings in Avasti to allow communications between my HP 8600 and my comput

    How do I set my firewall settings in Avasti to allow communications between my HP 8600 and my computer

    Something to Consider:
    If you are talking about "Avast!" Security Software, either the free or the paid version, the following may apply to you:
    There are three main levels of Security in the Avast! software:  Home, Work, and Public
    Home is the setting many people use when "at home", that is, connected to the home network.  The home network is sometimes defined as the "192.168" network:  these are the computers and printers that you have and use in your home environment.  The network is (most usually) private and (should be) secured with with a passphrase at your router.  The Avast! Software sees the "Home" network as a "safe" environment:  devices connected within the "Home" network are allowed to "talk" (communicate) with one another without undue restrictions.
    Work is the next setting.  The software places some restrictions on this level of communication.  Home users can certainly use this setting -- in many (most) cases, the "Work" setting is a solution that provides for communication and a bit more security for the home network and its devices.
    Public is the strictest setting and is meant to keep your computer safe in a public place:  the library, coffee shop, on a street corner.  Outside "prying eyes" are prevented from peeping and outside communications are restricted.
    If you have set (or left) your Avast! software set to Public, or even Work (and you do not know how to handle the restrictions), then you may have simply locked out the communication between the printer and the computer(s) on your home network.
    Open your Avast! Software and set the security level to either "Home" or "Work".
    You can find out more about how to use the software settings at the Avast! website.
    Advanced Users Only - You will  know if you changed the Rules... this is not something one does by accident.
    If you have changed the rules within the settings, you may have locked yourself out.  Make sure you have both "in" and "out" traffic settings adjusted correctly for each rule you change / adapt / add.
    Kind Regards,
    Dragon-Fur

  • Is it possible to specify print settings for web pages?

    Is it possible to specify print settings for web pages designed in Muse? For example, can you exclude background images from printing?

    Hello,
    You can define Print Setting to page By Defining CSS Style in page Header by typing Style tag.
    you can go to Page > Page Properties > Metadata  > HTML for <Head>.
    you can refer to the link below for more details about Print properties in CSS.
    http://www.smashingmagazine.com/2011/11/24/how-to-set-up-a-print-style-sheet/
    Regards
    Vivek

  • How do I set the aspect ration for 4:3  or for 16:9?

    How do I set the aspect ration for 4:3  or for 16:9 in Adobe PE12?

    PulcinellaNM
    What computer operating system is your Premiere Elements 12 running on? Have you updated from 12 to 12.1 Update via a project's Help Menu/Update? If not, please do so. That is all background information for now.
    As for the question that you are posting....
    I think we need to go a lot deeper into what you are doing. Here are some considerations
    The aspect ratio setting is in the import settings. In Premiere Elements 12 Expert workspace, the project automatically sets the project preset based on the properties of the first video file that you drag to the Expert workspace Timeline. If your video's properties include a 16:9 flag, then the project settings will have a 16:9 flag (aspect ratio). If you do not want the project to set the project settings automatically, you can set the project settings yourself manually with File Menu/New/Project and then import your source video.
    If a problem exists where imported 16:9 video is presenting in Premiere Elements as 4:3 instead of 16:9 (typical of the JVC .mod file issue), then you can set the pixel aspect ratio under Interpret Footage feature inside the project workspace.
    At this point, I think it best for you to give more details and background behind your question so that we can be sure that we are giving you the information that you need to succeed in your projects.
    If you need clarification on anything written, please do not hesitate to ask for clarification.
    Thank you.
    ATR

Maybe you are looking for