How do I set my printer to print on odd sized paper? HP Officejet Pro 8000

I need to print on a 8.5 x 4.5 sheet on pre-cut paper, is this possible?

Hi Beemo,
I see that you're wanting to print in black ink only.
I have a couple of questions for you.
Are you trying to print black ink only while using ePrint?
Are you trying to use black ink only when printing from computer?

Similar Messages

How do I set up my dx7400 printer to iPhone 4s as I have no pc or lap top?

How do I set up my dx7400 printer to iPhone 4s as I have no pc or lap top?

You don't.
According to Epson ( http://www.epson.com/cgi-bin/Store/support/supAdvice.jsp?BV_UseBVCookie=yes&type =highlights&noteoid=196563#epson_connect_compatibility ) That printer does not support AirPrint.

How do I set up my Epson printer to print wirelessly from my Mac Pro

How do I set up my Epson printer to print wirelessly from my Mac

Hello:
You need to go to Epson for specifics (is your printer set up for Airprint, etc).
Barry

How do I set up a network printer an an in-OS driver in Windows 7 32 bit?

How do I set up a network printer an an in-OS driver in Windows 7 32 bit?

What printer? What router?
Get the latest software for your printer from the "Support & Drivers" link at the top of this page.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

How do I set Ipad up to print from hom PC?

How do I set up Ipad2 to print from how PC?

To print from an iPad, you will either need an AirPrint-enabled printer or use a software solution, like Printopia. Unfortunately, Printopia I believe only works with Macs so it would not be a viable option in your case.

How do I set up automatic duplex printing for my HP Laserjet Pro400 M401n series?

How do I set up automatic duplex printing for my HP Laserjet Pro400 M401n series from my PC using windows 8?

Thanks for your reply.
Looks like I didn't do enough research as the HP site said it's available however upon further investigation only manual duplexing is available with drivers installed.
http://www8.hp.com/ca/en/products/printers/product-detail.html?oid=5166605
Drive productivity and save paper, using automatic two-sided printing

I have Mac OS 10.8.5 and Acrobat X 10.1.9. how do I set up as PDF printer?

I have Mac OS 10.8.5 and Acrobat X 10.1.9. how do I set up as PDF printer?

during installation of acrobat a virtual pdf printer is installed.
when printing you should see an option to print to a pdf file. if you don't, reinstall.
you might need to uninstall, clean your system and then reinstall, http://labs.adobe.com/downloads/acrobatcleaner.html

How can I set up a preferred printer so I don't have to pick the printer each and every time I print something out? At the moment, even immediately after printing one thing, it prompts me to pick a printer, which is very time consuming.

How can I set up a preferred printer so I don't have to pick the printer each and every time I print something out? At the moment, even immediately after printing one thing, it prompts me to pick a printer, which is very time consuming.

Compass Health Systems wrote:
How can I set up a preferred printer so I don't have to pick the printer each and every time I print something out? At the moment, even immediately after printing one thing, it prompts me to pick a printer, which is very time consuming.
No, there is not setting for a default printer.The system scans for available airprint printers each time you print.

How do I control who can print over my wireless Officejet Pro 8000 A809n?

Hi all,
Looking for some help as to how I can control who can/cannot print over my Officejet Pro 8000 A809n (CB047A) printer.
We have multiple users in the house, but I only want to allow certain people to print wirelessly, is there some way I can set this up?
Any help would be much appreciated!

Sorry, you cannot control this other than to remove the printer from the network, turn it off or otherwise disable it.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

How do I reset to default or change static IP address on HP Officejet Pro 8600 Premium printer?

How do I reset setting to default or change static IP address on HP Officejet Pro 8600 Premium printer?

Hi,Tap the right arrow and then tap the Setup icon.Tap the Network option and select Restore Network Defaults.Confirm any prompt to restore the default network settings, it will remove any manual IP configuration. If you are wirelessly connected to the network, select Wireless Setup Wizard and select your network to reconnect the printer wirelessly. Regards,Shlomi

HT4356 My printer is HP Officejet Pro 8000 A809 Series and I don't see it listed. How can I print from iPad?

My printer is HP Officejet Pro 8000 A809 Series and I don't see it listed. How can I print from iPad?

You can use 3rd party software such as Print n Share if you have a PC or Printopia if you have a Mac.
Or you can check HPs site and see what they have available.

How to print pdf on a legal sized paper

I can't seem to print pdf files on legal sized paper properly. They always shrink it down. I have tried going to "paper handling" and clicking "scale to fit paper size" to US Legal.
On Copies and Pages I have to click "Fit to Printable Area" otherwise the document gets cut because the printable area is only 8 x 11.
I guess what I'm trying to say is how do I increase the printable area?

Hi amanyeah,
Is it Legal size to start with?
If it is not, then you'll need to Save as..., like a tiff or jpeg & resize it to 8.5"*14" in say GraphicConverter...
http://www.macupdate.com/info.php/id/263
Did you go to Page Setup and switch the Paper size to Legal?

No wireless connection to Officejet Pro 8000 printer

This used to work, though occasionally the connection went down. Now nothing at all. I have Windows 7, trying to connect to an HP Officejet Pro 8000 Wireless printer. Neither has been updated recently as far as I know, and there has been no reason for network or firewall changes that I am aware of.
The printer will produce its three page report, and everything passes ("No problems found", connected to correct network, etc.). I can connect to the printer via USB and print out fine. I have tried rerunning the connection software; it finds the printer (presumably via the USB connection), but then says:
"Your computer is unable to communicate with your printer at 192.168.1.73. This may be caused by firewall software. If you are using firewall software, verify that UDP port 427 is unblocked for both inbound and outbound traffic.
Your PC can not communicate with your printer at address 192.168.1.73. Check all cable connections. Check that the printer, PC and router are powered on and connected to the network."
My Windows firewall is set to "display a notification" when it blocks something, and that has not happened when the software is trying to connect, so it does not seem to be the firewall (and the software should set that up itself anyway). There are no cable connections - I am connecting wirelessly. Everything is turned on. The PC (192.168.1.67) can connect to the router (192.168.1.254) fine. I have tried pinging the printer from a laptop also on the network, and that fails too.
I have restarted both the printer and the PC.
The wireless network has WPA-PSK authentication, but the password has not been changed.
I have tried running the HP Print and Scan Doctor. It tell me my computer is connected (thanks, I already knew that) and that to connect the printer I need to run the "wireless setup" software (thanks, I already knew that). So that was a waste of time...
When do I go from here?

From what you describe it is possible that the router has a network firewall which is blocking the communication with the printer. I am going to include a image which contains the ports which have to be open on that firewall, you may have to contact the router provider to achieve this.
Another thing to note is that sometimes you get better network success through installing the printer with the USB cord and then performing the USB to Wireless setup witch directly borrows the authentication of your computer.
Let me know how that goes and I will get right back with you!
-Spencer

Duplex printing with officejet pro 8000

I am using this officejet pro 8000 to print up some newsletters. When printing a two sided copy (duplex printing) something happens which changes my border setting. Printing the exact same document, but electing one-sided copy renders a perfect border. I would not have a problem copying just one side, then re-loading those in order to make two-sided copies, but the friction caused by the ink on the pages causes mulitple sheets to feed at the same time, jamming the printer. Has HP ever come up with a fix for this? I have seen this problem on the net, but the best folks have done (that I have seen) is to upload drivers for older machines. This has rendered good borders on duplex prints, but diminishes the quality of the print copy. Whatcha think?

Terrible Tom wrote:
Since updating to Snow Leopard, I have had serious problems duplexing. Under the print dialogue window, there is no option to duplex. H.P. blames Mac. Mac blames H.P. I can duplex by going to "layout" and where it says "duplexing off" selecting "long-edge binding" will work. How dumb. Mac Help senior customized my settings by adding "duplex printing" to the "Presets" list.
Are you using the latest drivers from HP? If I set up a printer with the HP Officejet Pro 8000 A809 Series PPD, I can see Two-Sided to the right of Collated if the HP Two-sided Printing Accessory (Duplexer) is checked in the Print & Fax -> Options & Supplies -> Driver tab. If this is not checked, Two-Sided won't appear.
MAC HAS TO CREATE A PATCH TO SIMPLIFY THIS SNOW LEOPARD ERROR!
Apple doesn't write the HP software.
Hope this helps.

Tutorial: Print index cards without removing paper from tray for Officejet Pro 8000.

The HP Officejet Pro 8000 and Officejet Pro 8000 wireless do not have a slot for inserting index cards and envelopes.
If you are wanting to print index cards without removing the paper from the tray, follow these steps.
The steps below are for 3 x 5 index cards.
1.) Open Microsoft Word
2.) Go to the Insert tab and insert a rectangle shape
3.) Draw a rectangle of any size
4.) Right click on the rectangle and select "Format Autoshape..."
5.) Under the Size tab, enter 5" for the height and 3" for the width (make sure "Absolute" is selected)
6.) Under the Layout tab, select "Center" for the horizontal alignment
7.) Click OK
8.) Use the keyboard up arrow key to move the rectangle to the top of the page. Make sure the top edge of the rectangle touches the top edge of the document.
9.) Print this document on plain 8.5" x 11" paper
10.) When you want to print an index card, place this 8.5x11 document in the paper tray printed side face up. Then place an index card over the rectangle and align with the border of the rectangle. After you print the index card, remove the 8.5x11 paper for the next time you need to print an index card.
Note 1: This are USA instructions. If you live in the UK or other countries you may have different paper size standards.

I can't tell you how much I HATE this printer. I will never buy an HP product again. BROTHERS printers are simply and easy to use.

HP OfficeJet Pro 8000 A809 printing line feed page after every job

I've searched and I have found this is a known issue - that there is supposed to be an update to fix this. I can't find this update anywhere for the HP Officejet Pro 8000 A809. It is connected to the computer via a USB cable. I have tried uninstalling and reinstalling the driver, changing the print heads, doing diagnostics on it, ..., and I still get the line feed page printing after every print job. Help!

Hey there @tjkalb, I hope you are doing well
I read your post about how a "line feed" page prints after each print job from your Officejet 8000, running Windows 7. I have some steps and questions for you to try to get started. Afterwards please get back to me with the results and we will go from there if needed.
1. Does the "line feed" page print after print jobs from all programs, or are you finding it prints when you print from somewhere specifically?
2. Try a Clean Boot on your PC, restart the PC, and try printing from Notepad to see if the line feed prints.
3. Print a Print Quality Page from the printer and examine it for any defects and to see if the line feed page still prints afterwards:
source
4. Click here and try download the "Updates" for this printer: HP Officejet Pro 8000 Printer - A809a
5. Create another User Account profile on your computer and try printing from there to see if the line feed page prints from another profile.
I look forward to hearing from you! If you wish to thank me for my assistance, click the thumbs up icon below
Happy Friday!
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

How do I set my printer to print on odd sized paper? HP Officejet Pro 8000

Similar Messages

Maybe you are looking for