How do I set Officejet Pro L7590 to "manufacturer's mode"?

...for printer to ignore color cartridges & print only black...?

Tool looks like a square with crop marks at each corner. If you have the "Application Bar" turned on the "Window" menu, once you activate the Artboard tool you can then set your orientation up in the Application Bar.
(Note: my screen shot is of CS6, but CS5 is somewhat the same)

Similar Messages

HP Device Not Found Error when trying to print or scan wireless- HP Officejet Pro L7590

Have had HP Officejet Pro L7590 All-In-One Printer for years. Always worked fine and I had no issues printing via wireless connection. Several months ago.. Possibly after a Windows 8 update. From Windows 8 to Windows 8.1 I have not been able to use the printers wireless feature. When I try to print or scan it shows the printer as offline. Also get an error message that tells me "HP Imaging device is not found". I can still print when connected to USB. Cannot scan or use features of the HP software suite. I have tried several times to correct. Reloading the software and drivers several times, but no success. I just tried again and was able to print the test page wireless, so got all excited and thought I fixed it. Then tried to print something and got the same error message I have seen in the past. I have talked to certain supports saying that it may be a firewall setting within Windows. Any other suggestions? Thanks

Hi @rfjones002,
Welcome to the HP Support Forums! I see you are not able to print or scan wirelessly to your HP Officejet L7590 and your computer running the Windows 8.1 Operating system. You get a 'Printer offline' or 'HP Imaging device not found' errors.
I would like you to start with the steps listed below:
Hold down the Windows Logo key () on the keyboard and the 'R' to open the run box, type %temp%
Delete all files and folders from the temp folder. Choose skip if any pop ups appear saying any of the files could not be deleted
Uninstall the software again - Uninstall the Printer Software Instructions
When the uninstall has completed restart the computer
Follow these steps to reset the registry settings and options for Windows Installer.
Hold down the Windows Logo key on the keyboard and the 'R' to open the run box
In the Open box, type
msiexec /unregister
and then click OK.
Hold down the Windows Logo key on the keyboard and the 'R' to open the run box
In the Open box, type
msiexec /regserver
and then click OK
*Note: there is a space between the c and the /
If you have any difficulty with this step, please use this link to perform it another way. Restarting Windows Installer
Run Disk cleanup from Accessories\ System Tool < How to Delete files using Disk Cleanup
Download and install the latest version of Adobe flash player http://www.adobe.com/support/flashplayerflashplayer/downloads.html
Perform a clean boot > How to perform a clean boot in Windows
Download the following SP40669 File Download - if this does not download and or install please proceed to the next step.
Turn off the Real-Time Scanning and Firewalls; The image below is a McAfee example, if you have a different antivirus program and need help disabling Real-Time Scanning and Firewalls let me know.
- Image source
Now you can go ahead and download and install the software here >
HP Officejet Pro Full Feature Software and Driver
If you are unable to print a test page, please run the HP Print and Scan Doctor- It was designed by HP to provide users with the troubleshooting and problem solving features needed to resolve many common problems experienced with HP print and scan products connected to Windows-based computers.
Please let me know if this was successful! I will watch for your reply.
Thank you,
HevnLgh
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

HP OfficeJet Pro L7590 want to use wireless

I have a HP OfficeJet Pro L7590 (all-in-one) want to use it wireless.
I have an Apple Macbook laptop (mine), and an IBM thinkpad laptop (from my company that I keep with me).
How can I use the all-in-one wireless with both laptops - what equipment do I need and where can I find it?
Thanks
Judy Uridge
This question was solved.
View Solution.

You need to have wireless router if you want to connect both wirelessly. The printer has no built in wireless radio so you need to connect it to the wireless router using a LAN cable. And before you can do this, you need to setup your own network first. You need to call your router manufacture or your ISP to setup your own wireless setup network.
For addtional information on setting the printer up on the network, you might find this link useful.
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00750079&lc=en&dlc=en&cc=us&lang=en&rule=459&pr...
Please click on KUDOS if you find my solution helpful.

HP Officejet Pro L7590 to be "AirPrint" enabled

How do i configure my HP Officejet Pro L7590 to be "AirPrint" enabled so my iPad will print to it? Using Windows XP on laptop

The L7590 does not have the ability to set up a customized email address, because it does not have web services (including ePrint) built in.
However, the printer does support using the HP ePrint mobile app which allows one to print from a mobile device using the app to a printer on the same network. Thus, if the L7590 is on the same network (ethernet/wireless) as the mobile device and the device has the HP ePrint mobile app, then one should be able to print through this manner.
For more information see the document located here.
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------
I am not an HP employee.

OfficeJet Pro L7590 - wireless printer issue

Hi,
I have a 2008 OfficeJet Pro L7590 printer. I'm just now trying to get my printer to print wirelessly and I'm having multiple issues. I lost the disk for installation, but downloaded the installation via hp.com/support
After installing it, I tried to connect it wireslessly. On the final step, it says "
Unable to communicate with your printer. Not all diagnostic tests could be performed. Check cable connections and then retry."
I've checked all my cords and everything and they are plugged in correctly! BUT here's the thing. When I go to my start menu, and click control pannel → network and then click on a tab, such as "Network and Sharing Center, Connect to a Netowk, or set up a connection or nework. The window absolutely freezes and I'm not able to click on it at all. Also, I don't see a wireless conection icon on the bottom bar, right corner. (not sure what that's called) All i see are two computer screens and a red X ontop of them (icon)
I really need to connect my printer wirelessly, so I can use my phone, ipads and ipod touches! Please help. I've spent so many hours trying to figure this out!
HP doesn't offer me anymore help because it's out of warrenty

Hello iAliciaa.
I understand you are trying to installing your Officejet L7590 and you are receiving a message indicating "unable to communicate
with your printer". Are you connecting this printer Ethernet or wireless?
Please follow this entire HP document if you are connecting your printer using an Ethernet connection: Printer Is Not Found During Installation.
I understand completely what you are talking about, but could you verify what type of Operating System you have?
Click on this website to find out: Windows.
Look forward to hear from you.
Ashley
I worked on behalf of HP.

HP Officejet Pro L7590 Printer - HP Solution Center does not work

I am not able to get the Solution Center suite to work because the installation has an error. I am using Windows 7 Home Premium. The printer I am installing is the HP Officejet Pro L7590.
If I go to Devices and Printers and add the printer. The driver Windows 7 driver would work, it would detect the printer and the test page and everything would be fine.
However, if I install using the software provided by HP for the L7590 it would result in an error and it would not work.
The failed driver installation is only from installing the full bundle software provided by HP, if by itself through Windows 7 it would be fine.
Because of the failed installation using HP software the HP solution center does not work.
In Devices and Printers, the printer has the yellow exclamation point requiring troubleshooting, I click on troubleshoot and no device drivers were found. In addition, I could not remove the printer. Before installing the HP software, I could successfully install the printer and there would be a green checkmark, and there would be an option to remove the printer. This leads me to believe HP has a faulty software bug that is causing the error.
I am suppose to use the HP add a printer shortcut that populated on my desktop after installing the software, the first time it would show the failure to successfully install the driver, afterwards it would not even detect my printer if it is plugged in. If I remove the usb and reinsert it, the Windows would just show the failed driver. I repeat, it failed after I install the software, it works fine without. The primary reason I want the software is to use the scanning feature.

Hello NickRT, and welcome to the HP Forums, I hope you enjoy your experience!
I see you are having software installation issues. i would like to try and assist you.
I would suggest Uninstalling the Printer Software.
Once it is uninstalled, I would suggest putting your system into clean boot mode within the Microsoft configuration. You can do so by following this document: How to perform a clean boot in Windows.
Once the computer is in clean boot mode, I would reinstalling the HP Officejet Pro Full Feature Software and Driver.
Good luck and please let me know the results of your troubleshooting steps. Thank you for posting on the HP Forums!
Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
Jamieson
I work on behalf of HP
"Remember, I'm pulling for you, we're all in this together!" - Red Green.

Problems with installing HP OfficeJet Pro L7590 driver All-in-One

Hello HP team.
Having problem with installing driver for HP Officejet pro L7590.
Starting the process the process bar goes to the end 100% and then disappear.
After that nothing happens.
Rebooting doesn't help.
Windows 7-64

Thanks for getting back to me!
Lets try some more steps:
Uninstall, level 3 for HP PC or level 4 for non-HP PC.
1. Click Start and type %temp% in the run field and click OK.
2. Look for, and open the folder starting with 7z (Example: 7zS2356) (if there is more than one 7z folder, try the most recent one)
3. Open folder Util
4. Open folder CCC
5. Run the uninstall_ L4.bat for a non-HP PC or run the Uninstall_L3.bat for a HP PC
6. When the uninstall has completed restart the computer
Try to install again using the HP Printer Install Wizard for Windows
Let me know how this goes please
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

HP OfficeJet Pro L7590 network printer

I just upgraded to v4.2.1 on my iPhone 4 and tried to use the new feature, AirPrint without success. My printer is linked using cat5 cable with my wired and wireless router and can be used with about 3-4 pcs within my family. I searched some articles and understand only a couple of HP printers can use this feature. How come Apple spend so much effort for a couple of printers of single company? I never imagined it becomes true. Did I misunderstand this feature? Thanks!

The Officejet Pro L7590 unfortunately will not be updated to support AirPrint. Check out my [FAQ|http://discussions.apple.com/thread.jspa?threadID=2658560&tstart=0] thread for some other options.
Just trying to help.
Andrew

HP Officejet Pro L7590 networking problem

Hi!
I have the following problem:
I have an Officejet Pro L7590 All-in-one printer. It is connected to my wlan router (ASUS WL-500G Premium) through its ethernet port.
I have two desktop PCs, i've installed, and using this printer on them without problems. One of them runs on Vista, the other on Windows 7.
But i can't get it work with my notebook. It connects to the router through wlan (Intel WLAN 3945ABG adapter), runs on Windows 7. When i try to add the printer, the installer detects the printer on the network, but during the installation of the device, i get an error, that the device cannot be set up.
I have tried:
-Other (older and newer) versions of printer software.
-Updated printer's firmware, doesn't work either with the original, or the newest version, the problem is the same.
-tried with all firewall settings, it doesn't work even with fully disabled firewall (I'm using Eset 4.0, even tried to remove it)
Does anybody have some idea for this? Please help!

The following are the details about network printer problems in Windows 7:
    “Access is denied” Error
     Not getting Add Printer Wizard
     Choose compatible drivers
“Access is denied” Error
If the “Access is denied” error is showing up on the computer, just go through the steps to fix the error. First, open the Printer Wizard through the Control Panel. Select the ‘Add printer Wizard’, then click ‘Add a local printer’ and then click ‘Create a new port’. Make sure that local port is there in the list and then click ‘Next’. In the Port name dialog box, type computer name and printer name and then click ‘Ok’. Complete the wizard steps to finish the process.
Not getting Add Printer Wizard
In some cases, the Add Printer Wizard may not be available to you. At that time, just open the Printer Wizard through the Control Panel. After that choose the ‘Network Printer’ page and go through the ‘TCP/IP’ page and complete the additional steps in the wizard.
Choose compatible drivers
You need to choose compatible driver in Windows 7. First, you have to click the ‘Start’ button and select and ‘All Programs’. Then, go to ‘Accessories’ and select ‘System Tools’ and then click ‘System Information’. Then, you have to select the ‘System Summary’ and then review the OS Name and System type to find out which version of operating system you are running. Then, accordingly choose the network printer driver for your computer.
Set peace of mind as your highest goal,and organize your life around it.

Hp officejet pro L7590 all-in-one printers - 'door open' message

We have a 1 and 1/2 year old HP Officejet Pro L7590 all-in-one . "Door Open" message would not go away even if all the doors are intact, or after we shut it down and turn it back on after 60 seconds. We could not print, fax nor copy. We talked to HP customer service which no longer support this series. How can we bring our printer back to work?

There are at least three interlock switches that can cause this error. One is on the door that covers the ink cartridges, one is on the top lid (covering the "guts" of the printer) you lift up to service the printheads and the third is on the back duplexer; if you don't have a duplexer, there should be a cover in place. You'll need to check all three to be sure they're in working order.
I know the door covering the ink cartridges has a tendency to break off the little tab that keeps the door closed so that would be the first one I'd check. The top lid that covers the "guts" of the printer also has a small tab that goes into a hole that activates an interlock switch. If that tab is broken off, the switch does not get closed, giving you the error message you see. I've seen this broken off also, usually from closing the cover when misaligned with the receiving hole. If this one is missing, you can ball up a small piece of paper and shove it in the hole to activate the interlock switch.
The 7590 is a great printer. Much better built than the newer models and cheap to operate, IMO. Hope you can get it working again.

HP Officejet Pro L7590 goes "offline" from my HP Pavilion laptop

My network printer (HP Officejet Pro L7590) goes "offline" from my HP Pavilion laptop often. I have to uninstall it and reinstall it in order to print again. It doesn't happen all of the time but about 90% of the time.
Documents will stay in queue but not print. I can't uninstall it completely without deleting any documents in queue. It's so frustrating!!
How do it get it back online without having to go through this? Do i need to reinstall a printer driver or update it? How can I tell if I need to do that?

There are several updates on this page. You did not state it but I assume you are using WIn7 64-bit.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

HP Officejet Pro L7590 (L7555) has legal size flatbed but won't scan legal size documents - WHY?

HP Officejet Pro L7590 (L7555) has legal size flatbed but won't scan legal size documents - WHY? Scanning to a Macbook Pro osx (10.6)

Hey there. What application are using to scan? Have you tried using a different application like Preview or Image Capture?
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

Officejet Pro L7590 - disconnected message

After reinstalling the drivers and checking for updates, which are current, I'm still haveing problems printing from my CAD program Vectorworks Fundamentals. When I send a document to print the system hangs on "spooling". I can delete the file only after shutting down the CAD software. All other programs print fine. I've contacted the software company and they are at a loss. I have a Photosmart C310 connected to the same computer and I can print without issues. I'm running Windows 7 - just recently installed - and all updates are current. Also, the CAD service packs are up to date. What is mysterious is that in the HP solutions program it shows that the L7500 series printer is disconnected. I was getting this message frequently when running Win XP too but had no issues with printing from any program. I open the printer toolbox and it says "the computer is unable to establish a two-way communication with the device". Just to test, I can go to a program, say Excel, and then print a document without issue. Then going back to CAD, trying to print causes the printer to hang on spooling again.
I've shut the computer and printer down, unplugged the printer and restarted, still the same situation.
I did not have this problem running XP. My only way to print a CAD document now is to save as a PDF and then print from there which it does fine - even though HP Solutions says the printer is disconnected.
Any solution would be appreciated. What is this scrubber that I saw on another trouble shooting posting?

Hi casemarte,
Welcome to the HP Forums! I see that you are getting a disconnect message with your HP Officejet pro L7590. I am happy to help you with this connection issue! I have a few questions for you:
How is the printer connected? Wireless, Ethernet, or USB?
Can you make copies with the printer?
Is the power cable plugged into a surge protector or directly to the wall outlet? Issues when Connected to an Uninterruptible Power Supply/Power Strip/Surge Protector. This applies to Inkjet printers as well.
In the meantime, please try our HP Print and Scan Doctor, and let me know what happens. Hope to hear from you, and have a nice day!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping!

Officejet pro L7590 software/machine install procedure test

Just going to list a procedure I used to hook up an Officejet pro L7590 to my windows 7computer.
I need someone to try this out and tell me if it worked for them ( it worked for both of my computers ).
1...
- uninstall the printer if installed and use the HP unistall to remove the software.
- Reboot to complete the uninstall.
2...
- Download and install CCleaner and run it to repair registry issues.
3...
- Download and run "Windows Installer cleanup utility"
- "If you have the program installed, open it in Start - All Programs - Windows Install Cleanup. It then opens up and you should see a list of many program name. Please have a look there if you find the following entries "32/64 bit HP Cio installer", "bpd_scan", "scan". If you find this, please select the program and press the "remove"."
- Restart computer.
4...
- Search the computer C drive program files for the folder HP, look inside and if it has the folders marked CIO, Digital Imaging and software updater, then go back to the HP folder and delete it.
5...
- Load newest version of HP software
- at the review installation options box - click on "select software" then uncheck everything except for the top two and OCR then click on OK then Next.
- When the connect device now window opens check the box that says "unable to connect now" and hit next and then look for the install shortcut on desktop and make sure its checked then hit finish.
6...
- Restart computer
7...
- Use the desktop HP short cut "install new device".
- use USB connect and hit next
- When connect device now appears use the "connect using USB cable"
-Hit finish button
- Cancel the register product now window.
- Cancel the registration now window
-at the end of device install use "print test page" to confiem install
- NOW install more software using the button that says " More software "
-then press the "more" button and select the "Solutions center software "
-Click finish and exit.
8...
- Double click the HP Solutions desktop shortcut and test your new capabilities.
Please respond to tell me how it worked out ???
Thank you for testing.

Hi rvanwaning
You can use the cd or download the drivers and then plug the printer in when prompted to install the printer software. Here is a document for the different ways to install the printer.
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02282602&tmp_task=useCategory&cc=us&dlc=en&lang...
I have included the drivers link for you to download.
Win7 32 bit drivers.
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=mp-79356-2&cc=us&dlc=en&lc=en&...
Win7 64 bit drivers.
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=mp-79356-2&cc=us&dlc=en&lc=en&...
Hope this helps.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Officejet Pro L7590-doesn't recognize cyan cartridge

Officejet Pro L7590-thinks cyan ink cartridge "damaged or missing." I've tried new cartridges & turning printer off & on. I can't clear the message to clean printheads or do ANYTHING. HELP!!

Hi calialva,
Welcome to the HP Forums.
I see that you are having an issue with saving a scan to your designated folder.
So I can better assist you, please respond with which Operating System you are running:
Which Windows Operating System am I running?
Mac OS X: How Do I Find Which Mac OS X Version Is on My Computer?
Write me back when you have time and I will be happy to help.
Cheers,
Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
W a t e r b o y 71
I work on behalf of HP

How do I set Officejet Pro L7590 to "manufactu​rer's mode"?

Similar Messages

Maybe you are looking for

How do I set Officejet Pro L7590 to "manufacturer's mode"?