How do I set phone to be COMPLETELY silent with NO vibrate?

I used the volume button on the upper left side of the phone and turn it all the way to silent. I also went to settings/sound and set it on vibrate OFF. I also tried setting the Ringer and Alerts section - Change with Buttons both On and Off. However, my phone will still make text sounds when I receive texts and notifications from Facebook. I can not figure out why it won't go completely silent with no vibrate. Can anyone help me out here, please?

Email alerts are actually different with the one that you have set.

Similar Messages

How do you set up the alert for FaceTime with sound

How do you set up the alert for FaceTime with sound?

Using FaceTime http://support.apple.com/kb/ht4319
Troubleshooting FaceTime http://support.apple.com/kb/TS3367
The Complete Guide to FaceTime: Set-up, Use, and Troubleshooting Problems
http://tinyurl.com/32drz3d
Troubleshooting FaceTime and iMessage activation
http://support.apple.com/kb/TS4268
 Cheers, Tom

Hi, I want to use my Capsule just as a back up via wireless. How do I set this up without connecting it with an ethernet cable to either a router or the iMac??

Hi, I want to use my Capsule just as a back up via wireless. How do I set this up without connecting it with an ethernet cable to either a router or the iMac??

I misunderstood what Time Capsule is and had hoped for a wireless backup device that didn't have to be connected to the router.
The TC is a wireless backup device.. it does not need to be connected to the main router..
The problem is the computer.. not the TC.. the computer has only one wireless card.. if your current internet is by wireless.. then you must choose.. internet or backup.
But my other suggestion will work.. get a wireless USB stick compatible with Mac OS.. there are plenty and cheap.. since you are in the same room as the TC they will work fine.. plug it in and load the driver.. taint hard.
You should do the first backup by ethernet though.. wireless is too slow.. once you have that, you will do fine.
Search ebay for wireless n usb.. Mac compatible..
http://www.ebay.com/itm/New-EDUP-Mini-Wireless-11N-300M-USB-LAN-Card-WiFi-Adapte r-Nano-Card-Soft-AP-/150864362939?pt=US_USB_Wi_Fi_Adapters_Dongles&hash=item2320 377dbb#ht_3553wt_1165
As you can see.. they are getting smaller and neater.
I have no idea if it works .. haven't tried one.. but I have used USB wireless stick on the Mac to overcome this issue.
You will need to set static IP .. not hard but you need to set specifics if you do buy one post again for the setup.

How can I set up a guest access point with a Time Capsule and an Airport Extreme? I am using a Telus router with the Time Capsule used as a wireless access point (bridge mode). I don't want the guest access point to have access to my network.

How can I set up a guest access point with a Time Capsule and an Airport Extreme? I am using a Telus router with the Time Capsule used as a wireless access point (bridge mode). I don't want the guest access point to have access to my network.

The Guest Network function of the Time Capsule and AirPort Extreme cannot be enabled when the device is in Bridge Mode. Unfortunately, with another router...the Telus...upstream on your network, Bridge Mode is indicated as the correct setting for all other routers on the network.
If you can replace the Telus gateway with a simple modem (that performs no routing functions), you should be able to configure either the Time Capsule or the AirPort Extreme....whichever is connected to the modem....to provide a Guest Network.

How do I set up a booklet to print with my Konica Minolta?

how do I set up a booklet to print with my Konica Minolta?

Is it a BizHub? If so, use the booklet printing from the Koncia driver.
If it's like the one I have, click the Printer button at the bottom of InDesign's print dialog, then choose Layout/Finish from the drop down menu, and booklet from there.
One thing to note: with this method, leave your paper size the same as one page of your document.

How do I set up my iphone to sync with my outlook account?

How do I set up my iphone to sync with my outlook account?

Hi maryannmc,
You have two options.
1. You can plug the iPhone into iTunes and select the "Info" tab and choose "Sync Mail Accounts" and this will transfer the settings across.
2. In the iPhone you can go to Settings > General > Mail, Contacts and Calendars and choose "Add account"
You will need to know if your account is POP, IMAP or Exchange and this will help determine what settings you need to enter and how to set it up so both your computer and iPhone can receive email.
The iPhone can add most popular accounts with ease such as gmail, yahoo or hotmail.
Hope this helps,
MiFFMaN

How do i set the iphone to auto sync with the mac book pro

how do i set the iphone to auto sync with the mac book pro?

Iphone Sync Support wrote:
Thanks but this is not what I am looking for. I am looking for the settings - setting that allows our iphone to auto sync with your mac book when you make a puchase on either device.
You aren't going to sync with my MacBook when I make a purchase.
And you are not going to autosync your iPod with the MacBook unless you tell it to sync or plug it in.
You can enable Automatic downloads when you make a purchase.
iTunes settings > Store.
When you make a purchase, it will automatically download that purchase to devices set up the same way.
This is not the same as autosyncing your device to your computer (as you first asked).

Hard drive crashed, how do I set up itunes sync from iphone with new computer?

hard drive crashed, how do I set up itunes sync from iphone with new computer?

hard drive crashed, how do I set up itunes sync from iphone with new computer?

HT4993 how do i set phone to ONLY download songs that ive selected in itunes

how do i set up my iphone to ONLY synch songs that ive selected in itunes. Currently have all icloud songs on my phone.

On the Summary page of your device in iTunes, select "Sync only checked songs and videos."

How to make it completely silent (IM still vibrates)

I need to make my phone go completely silent when I push the switch over. I've changed the messaging and the calls, those work, but I'm still having a problem with Instant Messenger. I've gone into global settings and unchecked the Enable Sound box, but when I'm outside of IM and I get a new one, it vibrates which is really a problem. Do you guys know how I turn this off? I don't want to have to be signed out of IM if possible. Thank you!
Post relates to: Centro (AT&T)

Hello!
The IM program controls its own volume/vibrate settings which are not found in the Preferences app on your centro. Unfortunately this application does not have GUI setting to toggle this feature, its a static setting. I belive that Butler can help you with this though. Butler lets you control your device in a very detailed way and uses its own preference library which is independent to the os prefs.
Post relates to: Treo 650 (Unlocked GSM)

How do I set up my AEv5 using DHCP with a Netgear DG834Gv5?

Hi,
I've recently bought a MBPro and love it.
I then bought an Airport Extreme to extend my available Wi-Fi distance and increase its speed. It's good, but it's not currently set up as I'd like it to be.
My kit...
Netgear DG834v5 Modem/Wireless Router
Apple Airport Extreme v5
Currently the AEv5 is set up in Bridge mode, with the wireless of the Netgear switched off completely. As I understand it, this makes the Netgear a wired modem, from which the AEv5 acts as the replacement (improved) Wi-Fi mast.
I want to change the AEv5 from Bridge mode to DHCP/DHCP+NAT for the following reasons...
- I can then set up a 'guest' wi-fi network.
- I can then see a full list of the devices interacting with my Wi-Fi signal and block any potential intrusions.
I don't know the implications of whether or not the AEv5 controlling the NAT is a good thing or not, so...
- Can someone please explain the difference and benefits/drawbacks of the AEv5 controlling NAT as well as DHCP?
I then need to know...
- How I can turn off all DHCP/NAT/DHCP+NAT on the Netgear?
- How I can set up the AEv5 to do the DHCP/NAT/DHCP+NAT itself?
Any help would be greatly appreciated as I've spent hours searching the net already with no luck. I'm out of my depth and out of ideas; if someone knows anything that could help me it'd be great to hear it!
Cheers!

Can't help with Netgear, since I have not used the device that you have there, but can offer a few thoughts about the AirPort Extreme.
Currently the AEv5 is set up in Bridge mode, with the wireless of the Netgear switched off completely. As I understand it, this makes the Netgear a wired modem, from which the AEv5 acts as the replacement (improved) Wi-Fi mast.
Correct. This makes the Netgear a wired modem/router, since it is also configured to handle DHCP and NAT services for the network.
- Can someone please explain the difference and benefits/drawbacks of the AEv5 controlling NAT as well as DHCP?
If you want to enable the Guest Network, then the AirPort Extreme must be configured to provide DHCP and NAT services.
If you open AirPort Utility on your Mac, click on the AirPort Extreme icon, click Edit, then click the Network tab at the top of the screen, you will see that the AirPort Extreme is currently configured in a Router Mode of Bridge Mode.....which is the correct setting for the AirPort Extreme with your Netgear modem/router.
To make the AirPort Extreme provide DHCP and NAT service, you would change the setting for the Router Mode to DHCP and NAT. But, do not do this....yet.
The DHCP only setting on the AirPort cannot be used if you want to enable the Guest Network. This setting is rarely used, and would only be required if your Intenet Service Provider is furnishing you with a bank of fixed IP addresses....usually 4 or 5......to use for your connection and devices.
- How I can turn off all DHCP/NAT/DHCP+NAT on the Netgear?
Seems like that would be a question for Netgear support. It may....or may not....be possible to do this.
Even if you do this, there will be no guarantees that this setting will work correctly with AirPort Extreme.
But, before you consider doing this, it would be good idea to check with your Internet Service Provider to make sure that they will support this type of configuration.
I'm sure that you will agree that it would be of little value if you configured the Netgear device to turn off DHCP and NAT and function in Bridge Mode, and then had a connection issue....and your service provider refused to help you.
Perhaps your service provider has a simple modem that they could offer to you. That would work with the AirPort Extreme and you would not have to worry about trying to configure the Netgear to do something that it was not likely designed to do.

New iMac 21.5". How can I set up a new user account with access to all the files of the original user account?

Running Mavericks on a 2013 iMac 21.5". I want to set up a second user account with different settings that meet the requirements of specific software. I need the files to be accessible by both users. I have made both the main and secondary accounts administrators. I have also enabled file sharing for both. Neither account can see the other's files in Finder.
How can I make all files accessible to both accounts? I read that administrator accounts automatically can see all files on the computer, but it is not working out that way. I have restarted the computer, to no avail.

Comcast only offers POP accounts, and one way to set up the account and enter all the settings before it connects to the mail server, might be to do it Offline:
https://support.mozilla.org/en-US/questions/991539#answer-547878
The server settings are given [http://customer.comcast.com/help-and-support/internet/setting-up-thunderbird/ here], but the method is for Online account setup.

How do I set up my emails on ipad with onetel please

How do I set up emails on my ipad using onetel

http://community.talktalk.co.uk/t5/Mobile/onetel-com-emaill-address-settings-for -an-iphone/td-p/870410

How do i set up 2 or more devices with find my iphone

how do i set up 2 iphones with find my iphone (1 iphone 4s and 1 iphone 4)?

If both have iOS 5, just go to Settings > iCloud > Find my iPhone ON and that's all you need to do. You can download the free Find my iPhone app or go to http://icloud.com to see if it works.

How do i set up time capsule to work with airport extreme base to extend wireless network?

i have a airport extreme base, how do i set up a time machine to extend the wireless network i have with airport extreme? i have also 3 airport express's connected to the same network to extend my wifi all over my house. thanks in advance.

Much better graphics, thanks.
You can leave the Time Capsule connected by Ethernet from the Linksys and configure for a "roaming" network as mentioned previously.
To do this, open AirPort Utility - Manual Setup
Click the Wireless tab below the icons
Wireless Mode = Create a wireless network
Wireless Network Name = Same name as the AirPort Extreme
No check mark needed next to Allow this network to be extended
Radio Mode = Same setting as the AirPort Extreme
Channel = Automatic
Wireless Security = Same setting as the AirPort Extreme
Wireless Password = Same password as the AirPort Extreme
Confirm Password
Click the Internet icon, then the Internet Connection tab
Connect Using = Ethernet
Connection Sharing = Off (Bridge Mode)
Update to save settings and allow the Time Capsue to restart
Then power down the entire network
Wait a minute or two
Start the modem first and let it run a full minute
Start the AirPort Extreme the same way
Power up the switch
Power up the Time Capsule for a minute
Keep starting devices one at a time about a minute apart
Now, your computer will automatically pick up a wireless signal from either the AirPort Extreme or Time Capsule, whichever device is closer and providing the stronger signal.

How do I set phone to be COMPLETELY silent with NO vibrate?

Similar Messages

Maybe you are looking for