How Do I Set Print Quality in PSE 10 to above 720 DPI?

Hello Everyone,
I am trying to print a 4888px x 3456px (A4 aspect ratio) to an A4 sheet from an Epson SC-P600 inkjet printer.
In the PSE 10 Print Dialog Box I have set PSE to Manage Colours and selected my printer ICC profile.  From the Print Dialog Box's "More Options" window I click Printer Preferences and set the Print Driver's Print Quality to SuperPhoto 5760dpi x 1440dpi.
After clicking OK a few times to get back to the PSE10 Print Dialog Box, I see 720 DPI as the Print Quality value at Item 2 - Printer Settings on the right hand side of the PSE print dialog box.  Even if I change the printer driver's print quality to 1440dpi x 1440 dpi, the print quality value remains at 720 DPI at item 2 in the PSE print dialog box.
I expected to see a value of either 1440 DPI or 5760 DPI values in the PSE print dialog box after setting the print quality in the printer driver.
How can I tell the  PSE10 print dialog box that my printer is set to 1440dpi, or higher, or will the printer still print at the the printer driver's setting regardless of  the DPI value in the PSE print dialog box?

save your settings as a preset... after you click print and change your settings... click on the Presets drop down and save as... it defaults to the last used preset provided you saved your changes.

Similar Messages

  • I upload iPhone pics to Shutterfly, which gives me a "low resolution" warning and blurry prints. Does anyone know how to enhance resolution/printing quality of iPhone pictures? iPhone 5

    i upload iPhone pics to Shutterfly, which gives me a "low resolution" warning and blurry prints. Does anyone know how to enhance resolution/printing quality of iPhone pictures?
    iPhone 5

    How does iPhoto play a part in this?  You're in the iPhoto forum.  Shouldn't you be asking your question in the iPhone forum?  I'll ask the powers to be to move you question to the iPhone forum.
    OT

  • How can i set print mode at run time in smartforms???

    Hi expert,
    In smartforms how can I  set print mode at run time.
    I have one screen.In this screen one check box is there.If user select that check box then print should be come double side otherwise it is coming single side.
    If it is possible then plz give me answer asap.

    Hi,
    Set These settings
    While calling smartform, paas control_parameters and output_options as mentioned below and set
    user_settings = ' '.
    It will send the smartform output to spool.
    DATA: wa_output_options TYPE ssfcompop,
    wa_ctrl TYPE ssfctrlop.
    wa_output_options-tdimmed = 'X'.
    wa_output_options-tddelete = 'X'.
    wa_output_options-tdimmed = ' '.
    wa_output_options-tddest = 'LOCL'.
    wa_ctrl-no_dialog = 'X'.
    CALL FUNCTION lv_fm_name
    EXPORTING
    ARCHIVE_INDEX =
    ARCHIVE_INDEX_TAB =
    ARCHIVE_PARAMETERS =
    control_parameters = wa_ctrl
    MAIL_APPL_OBJ =
    MAIL_RECIPIENT =
    MAIL_SENDER =
    output_options = wa_output_options
    user_settings = ' '
    x_adrp = x_adrp
    IMPORTING
    DOCUMENT_OUTPUT_INFO =
    JOB_OUTPUT_INFO =
    JOB_OUTPUT_OPTIONS =
    EXCEPTIONS
    FORMATTING_ERROR = 1
    INTERNAL_ERROR = 2
    SEND_ERROR = 3
    USER_CANCELED = 4
    OTHERS = 5
    IF sy-subrc 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
    WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
    Regards,
    Kumar(Reward if helpful).

  • Setting print quality in  3.0 starter

    I am running the PhotoAlbum 3.0 starter edition. When I try to print on my HP Photosmart 7660 printer I set the preferences to "best" print quality but when it prints the printer window says "normal". Therefor I'm not getting the quality prints I want. Hp says its the software. Tryed downloading the software again but it didn't help. Any suggestions?

    I've got the same problem with PhotoAlbum 3.0 starter edition and my HP 1200 printer. Can't get it to print in Best Quality mode. Please post your solution if you find one.
    Thanks

  • How to improve the printing quality of pictures, printing a database layout

    I have a database that contains also pictures in multimedia containers. If I print a layout containing a picture, the quality of the picture is really bad! Pixeled with big pixels.
    Is there a possibility to get better prints?
    The pictures are JPEGs of reasonable size.
    The picture in the layout on the screen looks MUCH better.
    Printing to an PDF and viewing this on the screen is equally bad.
    Any suggestions?
    Thanks!

    I'm guessing that your images are JPEGs. AppleWorks changes the resolution of all graphic formats except PICT to 72 dpi. There are a couple of things you can do improve the print quality of images.
    1. Turn on Fractional Character widths in Preferences > General > Topic: Text. This is a text setting, but it does improve the print quality of images.
    2. Open the image in Preview or GraphicConverter & Save As... a PICT to use in AppleWorks.
    PICT is generally the best format to use for inserting or pasting into AppleWorks. I find the resulting graphic can be resized somewhat & the resulting saved AW file is much smaller than if using JPEG or TIFF.

  • How to automatically set Print Scaling to 'None'

    Is there any way to automatically set print scaling to 'none' on an existing PDF document?
    This setting is set manually by going to File > Properties, and then going to the 'Advanced' tab and changing the 'Page Scaling' preference from 'Default' to 'None'. This preference can then be saved with the document.
    There seems to be no way to do this via javascript but if anyone has found a way to automate this that would be great!!!
    Ideally I want to run this as a batch process across a number of PDFs. Maybe as a last resort there is a way to do this using "execMenuItem"????
    Many thanks in advance for your help!!!!
    HJ

    Would something along these lines would work???
    "if printing 1:1 is critical, my recommendation would
    be to have an area on the page(s) for which scaling must be performed
    where you explicitly state the requirement for no scaling AND in which
    you place an line of known length, let's say an inch or a centimeter with
    text that warns that if that line is not exactly at the size specified,
    to reprint without scaling."
    (extract from post at: http://lists.frameusers.com/pipermail/framers/2008-March/011530.html)

  • How do I change printer quality?

    I am in the Print window and I click on the pull down menu that says Copies and Pages, and I see 8 options, none of which have anything to do with printer quality. On my Windows machine all I had to do was select between "draft, normal, and best" quality. Why is it so difficult on the Mac???

    click on Copies and Pages, are the following:
    Copies and Pages
    Layout
    Scheduler
    Paper Handling
    Colorsync
    Cover Page
    Firefox
    Summary
    If those are your only choices and you have looked through all of them, then my only suggestion is to refer you back to the provider of the printer driver. This is presumably the manufacturer of your printer which you did not specify.
    What you are seeing is not normal in my opinion. Either the printer driver is constructed at odds with the norm, there is some corruption, or the printer has not been added properly.
    Matt

  • How do I maintain print quality resolution when using both Lightroom and Photoshop?

    I usually edit only in LIghtroom, but in this recent photoshoot, the woman's skirt lining was peeking out and I need to photoshop it out.  When I try to do this and save it in Photoshop, the file size drops dramatically and I'm guessing the picture quality.  I also tried to right-click on the picture in Lightroom and choose "Edit in" photoshop, but Photoshop told me I couldn't use the clone tool unless I changed from 16 bit color depth to 8 bit because it had limited support for 16 bit.  I know there has to be a way to do this.  Any ideas?  By the way, I am using LIghtroom 3.6 and an old Photoshop Elements 5.0.

    Isacksen
    I am not completely convinced that your Premiere Elements 7 project settings are not at the core of your problems.
    1. You say that you have 1280 x 720 at X progressive frames per second (probably .mov) from a Canon camera and presumed 1920 x 1080 16:9 .mts @ 29.97 interlaced frames per second (aka 60i). What are you setting as the project preset in the new project dialog? Are you just OK'd it and accepting the default which would be NTSC DV Standard (720 x 480)?
    2. As for versions 11 and 12 helping you out with an automatic project preset, sometimes it does it OK and sometimes it does not. So, that feature is not a given cure all for an inappropriate project preset. Whatever the Premiere Elements version, you need to know the properties of your source media and set the project preset accordingly or make sure the program is doing it right. And, when you have a Timeline with a mixed of formats, you need to set priorities.
    Is the .mov and .mts both affected by the issue or just one?
    Three things to look at:
    a. The quality of just the 1280 x 720 in a Premiere Elements 7 project set for
    NTSC
    HDV
    HDV 720p30
    b. The quality of just the1920 x 1080 in a Premiere Elements 7 project set for
    NTSC
    AVCHD
    Full HD 1080p30
    c. Then look at the quality of both brought into a Premiere Elements 7 project set for
    NTSC
    AVCHD
    Full HD 1080p30
    Please consider. And, if you decide to check out the above, please let us know the outcome.
    Thank you.
    ATR

  • How can I set print paper quality in Aperture

    I have recently converted from IPhoto to Aperture. Great but for one thing. In IPhoto when I send to print to my Canon ip5200r it prompts me for type of paper. In Aperture I can't find how to change papaer setting. All prints are coming out low quality. Any ideas??

    Can I direct you to a great online resource that covers all aspects of Aperture and printing:
    http://digitalmedia.oreilly.com/2007/02/13/insideaperturepodcast-9.html

  • How do I set the quality of a  "save to pdf" or "mail pdf" ?

    I have created a document (say, in Pages, MS Word, or Apple Works/Claris Works [yes, that is still an excellent programme..., even on an intel Mac] and then want to save it as pdf or " mail pdf".
    If the document page has many pictures, the pdf created via the "Print" function in OS X has quite some pixelation and the print-out is sub-optimal (eg for a Christmas/New Year card).
    Is there a way that the quality of the created pdf file can be altered?
    Any advice would be appreciated.

    Audition's native recording and processing format is 32 bit floating. This allows for the most accurate processing of your audio. You cannot set it to record at 24 bit depth. However a 24 bit source is happily stored in the 32 bit format when you record from an external 24 bit audio interface.
    If you need to save 24 bit files for use after you have finished editing them then you choose 24 bit from the Options drop down in the Save As panel when you save the file.
    See further explanation 24-bit hardware with "32-bit float" recording in 3.0

  • How can I set printing margins of report?

    Hello,
    I am trying to print programmatically a portrait of a JPEG image that has been created by a Front Panel.
    I print it by creating a Standard Report.
    While the JPEG image is fine, the printed image is compressed at the long edges. So, the printed image is a little bit distorted.
    I change the Printing:Margins Property of the vi at the First Call of the vi, but the result is the same.
    On the other hand, if I open the JPEG image with a program like Picasa and print it, the printing image is not compressed/distorted.
    I attach an image of the code that is used to print the JPEG and an image that shows the Printing:Margins Property.
    How can I print it correctly via LabVIEW?
    Solved!
    Go to Solution.
    Attachments:
    Print_code.JPG ‏31 KB
    PrintingMargins_code.JPG ‏22 KB

    Hello,
    I tried the solutions that you proposed and I have the following results:
    1. The solution to print the Front Panel through the invoke node of the vi's reference is not ideal, because the desirable printer cannot be chosen.
    2. I cannot use the Word Report because I have not the Report Generation Toolkit for Microsoft Office.
    3. I used the HTML Report and I change the print settigns by modifying the registry keys in the following folder:
    "HKEY_CURRENT_USER\Software\Microsoft\Internet Explorer\PageSetup"
    I can change the margin_bottom, margin_left, margin_right, margin_top, Shrink_To_Fit and assign the values 0,0,0,0,no to them.
    The result in the printing image is obvious. It is no longer compressed and it is positioned almost according to the margins. Although all margins are set to 0, it has to be positioned 2cm more at left and about 2cm higher to be proper.
    But the footer and header registry keys even if they are deleted (I cannot assign empty string from command line), they are appeared in the printed page.
    I attach the new vi files that modify the registry keys of the above folder before printing and restore them after printing.
    Also, the Front Panel size of the Report.vi has been changed and set equal to the A4 paper size 21x29cm and a little bit bigger in order not to print the decoration border.
    So, the problem of proper printing of HTML report remains having only to remove the footer & header and understand why the printing image is not positioned at full left and full top even if the registry keys margin_left and margin_top are 0 and 0.
    On the other hand, if the vi's Front Panel JPEG image is printed from a Photo-program, it is printed correctly given that the margins are set to 0 and the "Scale" option has been disabled.
    Thank you very much for your help.
    I am looking forward to hearing from you if it is possible.
    Attachments:
    PrintReport.vi ‏336 KB
    Report.vi ‏6 KB

  • How do you change print quality for eprinting?

    HP Photosmart 5515
    OS installed XP
    The driver does not give this option. I like to do Fast Draft sometimes.

    Hello mshantea,
    If you are sending print jobs to the printer's ePrint email, there is no way to adjust the quality.  Sorry.
    -------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

  • How can I set External Editor to PSE, Jpeg files?

    I'm recovering from a hard drive failure, and now that I've re-installed Lightroom 4 and PSE 12, I can't get LIghtroom to send high quality JPEG files to PSE.  The two options are TIFF and PSD.  I tried manually setting the external editor to PSE.exe, which gives me JPEG files, but they show up in PSE at very low resolution, even though the resolution is set to 240 in Perferences.  I'm exporting at 8 bit, since PSE doesn't work well with 16 bit.  Before the crash, I could send over high resolution JPEG files, so I know it's possible.  What am I doing wrong?

    Thanks for that. Yes I got it to work but had to select Photoshop first. At which point I got a message that it was already the default editor; so I clicked choose anyway and got the jpeg option. I then switched to the PSE editor app and sure enough jpeg remained as a choice. Maybe the OP needs to switch apps and then re-select the PSE editor app. A bit odd really, even the difference between Photoshop as the default and Photoshhop as the additional choice!
    Worked first time on Mac and LR5 without any messing about.

  • How Do I Set Printer to Work Wirelessly?

    Help! I have a new MacBook Pro and a HPC4780 printer and am trying to get the printer to work wirelessly. The HP person walked me through the printer set up over the phone and the printer itself works. However, it will not print off my computer. I have an airport express router. When I ran the test on the printer I received a Failed response for " Network Name (SSID) found". I would appreciate any guidance at this time. Am getting frustrated! Thanks.

    Hello Anne.
    I'm more than happy to help you through the steps. But the more I think about how it can impact your Mac's ability to connect to the Net and your beginner status then I think we should try a different tack. Obviously your Mac has no issue connecting to your network and is currently working fine so I suggest we need to confirm all these network settings in the Mac and then somehow check what the printer is set to.
    I have to inform you that I have an Airport Extreme, not an Express, so apologies to you now if some of the steps don't apply. Also, changing the settings in the Mac will impact your ability to connect to your wireless network and most likely the Internet. If you don't feel comfortable with changing these Mac network settings and impacting your ability to connect to the Net then it might be best to leave things alone and get some help from the Apple store. If you are confident with the Mac then here's some steps...
    So open the Airport Utility, you should see your Airport Express in the list of the devices in the left column and in the right pane some information about the device. At the bottom of this pane is the Manual Setup button - press this.
    The new view will now show several icons in the toolbar. The one you want is Airport, which is probably selected by default. With the Airport icon selected you will see several buttons below it, such as Summary, Base Station, Wireless and Access Control. Press Wireless. This is where you will see your wireless network name (SSID) and the type of wireless security being used. Write down your network name and the type of security you are using. Note that the password is not shown here so hopefully you know what you set previously.
    With the Airport Utility still open press the Advanced icon in the toolbar. Under the 'Logging and Statistics' tab is the button 'Logs & Statistics'. Press this and then press the Wireless Clients button. This will show all the devices currently connected to the Airport Express. The names of the computers is not shown - only their network address so you would need to know what the HP network address (also called MAC address) is to see if it was one of the connected devices. I would expect that based on the error you got before this printer is not showing in the list. You may have to check your HP documentation to determine what its MAC address is.
    With the Airport Utility still open go back through the steps the HP support got you to do to connect the device to your network, using the information you obtained from the Airport Utility. If the device appears to connect to your network then you can check the Wireless Clients view of Airport Utility to see if it shows the HP connection.
    Hope this helps you. Please reply if you need more assistance.

  • How to manually set print ordered metadata?

    How do you manually set the Print ordered or printed metadata for apeture versions? I have ordered prints through other sites, (Costoc, Smugmug, Mpix...), and would like to be able to manualy set this flag for the images I have printed. Is there a way to do that or is a custom field the best I can do?

    Not that I know of (without mucking inside the Aperture package).  Sounds like a good use of a custom field, though.  You could put in the printing service and the date -- ex:  20120122 Costco, 20120122 Mpix -- and then sort on the field to get a list in order printed, or use a Filter HUD Rule to group by printing service.
    You can trigger the built-in Printed flag by ... printing-without-printing.  Set up a PDF Printing Workflow that doesn't actually print, and select it from the PDF menu on the second printer dialog that comes up.  You could likely automate the whole thing.

Maybe you are looking for