How do i set the alarm clock noise to my voice?

My room mate got an iPhone 4 and uses it as his primary alarm clock. He has it set as some obnoxious warning noise but it doesn't wake him up for work. When I open his door and yell at him, he gets up and turns it off. So how do I set up his alarm noise as my voice so he will wake up?

I'd say get a new roommate.
Barring that, record your voice, create a ringtone with it and sync it to his phone. Google for how to create ringtones... there are dozens of easy, free ways to do this. There are also a few apps that do this.

Similar Messages

How do I set the alarm clock on the air SA10

Sony air -SA 10

I'd say get a new roommate.
Barring that, record your voice, create a ringtone with it and sync it to his phone. Google for how to create ringtones... there are dozens of easy, free ways to do this. There are also a few apps that do this.

How to u set your alarm clock but not have the phone or txt go off

Hi, My old phone Blackberry had an alarm. I would set it and then shut the phone off. The phone would turn itself on when the alarm had to go off.
IPone 4 will not do that. So, how do I set the alarm and not have the phone ring or get text alerts. I cannot figure out how to do this.
How do you delete pictures that are not on the camera roll there is a garbage can for those but not for other picture. I have double from synching too many times, this is my first Apple and I am not finding it easy to use.
Thank you

lumpy53 wrote:
If you turn on the mute switch on it will still vibrate when you get a call or text.
You can select whether or not it will vibrate when the mute switch is engaged. Settings>Sounds>Silent. Turn Vibrate on or off.

How to: Turn of the alarm clock after you've pressed snooze?

Hello,
In the morning I like to use snooze once or twice and because there's a possibility of falling asleep again, I always use snooze instead of turning of the clock. However, when I do get up, I'd like to turn of the alarm and snooze, which I cannot find out how to do. I always have to wait for it to go of again, so I can turn it of.
I have found out that if you go to clock -> alarm clock feature, turn off and on again the alarm clock, it solves the issue, but the everyday clicking of that is frustrating.
Is there an faster easier way?
I also noticed there is a snooze countdown on the screen, but sliding it, does not turn it off.
Thanks,
Reg,
MG

If you found a solution to your problem, you should tell what it is - there might be others with the same question (That's why there is a search function)
The forum isn't just for you.

How can I change the alarm clock sound on my iPhone

I can't figure out how to change the alarm sound on the Alarm Clock in my iPhone? Anybody got an idea for me?

What's wrong with you? Oh, now that you realized you made a mistake and I didn't say "Alarming"? The app tited "Alarmed" is the first thing that pops up if you search the App Store using the search term "Alarmed". It is also the name of the app as it appears on the screen of my phone. Oh, and the developer refers to it as "Alarmed" on his website.It may not have occured to you but, it is possible for more than one app to have the same name. Most of the people here are smart enough to figure out which one is the alarm clock by reading the description. But, we've already covered the reading comprehension thing,

How do I set the master clock output frequency on the PCI-1424?

I want to use the master clock to generate the pixel clock to the imaging chip.

Hi,
We have tried everything to be able to set the Master Clock Frequency (please confirm pins 89 and 90 on the 100 pin connector). Everything we try including opening NI supplied camera files sets the Master clock to 40MHz.
You're code however does do something, the Master clock frequency is set to 5MHz when we open a camera file with your code included. All the attributes show up in MaX but changing the values from Max has no effect, and the frequency remains at 5MHz. We undertake an apply and snap after each change of value with no effect.
Am I missing something as the command OnBoardClock is supposed to be used to set the Master Clock Frequency, but you don't use that in your text at all. I would appreciate an explanation of the text yo
u use, if you have the time, as I cannot find any reference to how the software knows what "Frame Grabber Clock" is.
Thank you in advance for your help.
Andy

How can I deactivate the alarm-clock?HELP

Every morning at 10 AM my Ipod Nano is ringing -.- I have forgotten how the alarm-clock can be deactivtated.Can somebody give me an advise how i can solve it.
Thanks

Marcel,
Navigate to the clock, then settings. You'll find a listing for alarm. Turn it off.
Jrsy

How do u work the alarm clock on a mini?

hi i left my fone at work one day and i use the fone as my alarm clock, because i had no alarm due to fone being at work i wanted to use my ipod alarm,i tried setting it but it didnt go off, how do i get it to work, do u have to plug it in ur comp, or keep earfones in ur ears while u sleep,it has no loud speaker so i cant see how i wud even hear it, if some one can explain id be grate full.
teresa

take a look at these
http://docs.info.apple.com/article.html?artnum=302077
http://docs.info.apple.com/article.html?artnum=304782#5

How can I set an alarm clock set to a time zone?

Hi,
I am about to go traveling quite a bit in multiple time zones. However, I have to take medication every 24 hours. I use the iPhone alarm to set a time. Is there a way I can adjust it so it goes off whenever it is, say 10pm in US eastern time zone even if I'm in another time zone and my iphone clock is local time?
thanks!

Hi, ralphsen01-
You can do this using window.scrollTo():
http://stackoverflow.com/questions/3163615/how-to-scroll-html-page-to-given-anchor-using-j query-or-javascript
Please note that when you embed an Animate OAM into Muse, you're in effect putting it into an iframe. Therefore, you need to call the parent window. You can get more information on this by searching for "iframe to parent communication" in a search engine.
Hope this helps,
-Elaine

Any way to set snooze time on the Alarm Clock

The default snooze time on the Alarm Clock is 10 minutes. Any way to set it to 5 minutes?

No, but there's and App for That. Try Garage Bank for iPad in the App Store.

How can I download a purchased ringtone so that it appears in the sounds column for the alarm clock sound

How can I download a purchased ringtone so that it appears in the sounds column for the alarm clock sound

Welcome to the Apple Community Elizabeth.
You should be able to access any book you have purchased from iTunes anywhere.
Do you have settings > iBooks > Show all purchases turned on.

HT5463 If using Do Not Disturb feature, will the alarm clock still notify me if set to do so?

If I turn on Do Not Disturb, will my alarm clock on my phone still sound to wake me?

Remember, if you do try and test it as randers4 says, you will need to make sure you put the phone in sleep mode for DND to work. If you set an alarm, turn on DND and the phone is still awake, it would work since DND does not work with the phone awake. So, set the alarm, turn on DND, put the phone to sleep and see if the alarm goes off.

I have a Samsung Intensity. It is currently set in "Alarm Only" mode. How do I set the phone back to normal mode so it will ring?

I have a Samsung Intensity. It is currently set in "Alarm Only" mode. How do I set the phone back to normal mode so it will ring?

Pumpkin-Hill, Let's get your ringtone working properly. Go to settings and tools, press 'ok', select sound settings, press 'ok', choose call sounds. then press 'ok' and select call ringtone and select the desired tone. Let us know if this helps.
sheritah_vzw
Follow us on Twitter
@VZWSupport

Can I set the iOS6 clock alarm volume?

Dear Folks,
The (alarm) clock built into iOS6 seems very slick, but the volume is too low to wake me up. I can't seem to find a setting to change the alarm volume (nor does the physical volume switch alter it).
Is there a way to do this?
Thanks!
pax / Ctein

Dear Moireach,
Yeah, that works!
A minor correction -- The 'official' name for that volume control is "Ringer and Alerts," not "Sound Effects." It's the slider right at the top of the Sounds setting screen on the iPad.
Thanks for your help.
pax / Ctein

How do u shut off this vibrate on the alarm clock apps

EVer since I updated my iPad to this ios6 it has been doing odd things. But I rely on my alarm clock to get me up and it is not going off its saying to shut the vibrate off. How the he!! Do I do this?

It would be too user-friendly to put it in the settings of the alarm clock. The only way to control vibration is in settings general and turn it off globally.

How do i set the alarm clock noise to my voice?

Similar Messages

Maybe you are looking for